I was unlocking my AT&T SX56 and the rom upgrade just stoped and I could not do anything to mak eit start up again. Now The pocket PC has upgrading rom always on the screen and I can gt active sync to even see the pc to try and flash it or upgrade the rom again. If you have any info you think that might help would be great. Thank you for your help.
If you still can get to the bootloader screen (power + soft reset), you can cook a new ROM as nbf file and use the SD flashing method.
Cool man I can get to that screen and will give that a go
Ok got a SD card and put on a new rom how can I make it load the info from th card. Also everytime I try and make a nbf file type it erros on me.
./mkrom.sh: ../../kitchen.local/mkrom-inc.sh: No such file or directoryno files for configid 26220739write xip block starting at 81800000, with 3 fileswrite xip block starting at 81980000, with 0 filesheader : No such file or directoryError creating new rom
I picked nb1 said was for flashing with SD card and can't get it to load.
i have a little problem with flashing my dell. before upgrading on him was wm2003se and i have downloaded a05 version of 2003se from dell web page. i tried to upgrade to wm5 and renamed WM50_B_A01_X50v_WM5_ENG_nb0.crc to DiMa_B_A01_X50v_WM5_ENG_nb0.crc and WM50_B_A01_X50v_WM5_ENG.nb0 to DiMa_B_A01_X50v_WM5_ENG.nb0. upgrading boot loader went successuful and after i press wl+pw+reset it starts sd loader but he cant see any os image (WM50_K_A01_X50v_WM5_ENG.nb0).
i tried to copy following files on sd card but he only see first image (boot loader image):
WM50_B_A01_X50v_WM5_ENG.nb0
WM50_B_A01_X50v_WM5_ENG_nb0.crc
WM50_K_A01_X50v_WM5_ENG.nb0
WM50_K_A01_X50v_WM5_ENG_nb0.crc
how to make him to run and see os image?
help
danijel
can anybody help me? why and how to make him to recognize OS image files (WM50_K_A01_X50v_WM5_ENG.nb0)?
i`am desperate....
you either need tzhe official Rom-Upgrade for WM5 (dell sold it once, now it may be available on ebay.)
the problem of yours is : you have wm2003se, so you have also the wm2003se bootloader (the dima_b_XXX-files) and just renaming the wm5-bootloader won't help, as it's different. and btw, i think for upgrading from wm2003se to wm5, you need the A00-image - the rest are just updates for wm5.
satani said:
you either need tzhe official Rom-Upgrade for WM5 (dell sold it once, now it may be available on ebay.)
the problem of yours is : you have wm2003se, so you have also the wm2003se bootloader (the dima_b_XXX-files) and just renaming the wm5-bootloader won't help, as it's different. and btw, i think for upgrading from wm2003se to wm5, you need the A00-image - the rest are just updates for wm5.
Click to expand...
Click to collapse
where could i download these files? i want to back to wm2003, so where i can download boot loader for and OS image fo wm2003?
i have made a backup of my OS but it extension is .RIS and dont know how to recover it, and also have a backup of boot loader of wm2003. what if i just recover my boot loader will it work because after flashing bootloader of wm5 it stop working? how could i use that .RIS file (34MB)?
please help me, i am a new in this area
drakic said:
where could i download these files? i want to back to wm2003, so where i can download boot loader for and OS image fo wm2003?
i have made a backup of my OS but it extension is .RIS and dont know how to recover it, and also have a backup of boot loader of wm2003. what if i just recover my boot loader will it work because after flashing bootloader of wm5 it stop working? how could i use that .RIS file (34MB)?
please help me, i am a new in this area
Click to expand...
Click to collapse
Code:
http://forum.xda-developers.com/showpost.php?p=1535377&postcount=1175
Code:
http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html
Just put the files on the SD Card, What have you actually installed? WM5 or 6 ? Then just rename de DiMa_B_ to WM50_B_ and flash as its written on the first post, I think that I put a guide inside the rar. I hope you win
Ah, you can make it using another way too. Go to dell page, support, download drivers... electronic, choose Axim, and X50. There, download the downgrade from WM5 to WM2003SE in your language, the rom I gived you before is the english version, maybe you want another language. Extract that exe with winrar or simply ejecute it, and dont continue, quit, go to c:/Dell... ROM and inside you will se a rom.IMG. Well, you need img2nb0f.exe, to convert the .IMG to .nb0
When you get he .nb0 file you have to create his _nb0.crc Maybe CRC Calculator help you or simple put the files on the SD Card and when you choose the SO image ( _K_ ) it will show you a CRC error, simple copy the good CRC, modify on the file on your PC, and put it again on the SD Card.
I could make it for you (if you dont know what are you doin), if your language isn't english.
This is only if your language isn't english, remember, if its english its more easy and save time, read the post #5
migatxu said:
Code:
http://forum.xda-developers.com/showpost.php?p=1535377&postcount=1175
Code:
http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html
Just put the files on the SD Card, What have you actually installed? WM5 or 6 ? Then just rename de DiMa_B_ to WM50_B_ and flash as its written on the first post, I think that I put a guide inside the rar. I hope you win
Click to expand...
Click to collapse
before anything i have wm2003se a01, then upgrade to a05,after that i downloaded wm5 boot loader and renamed WM50_B_A01_X50v_WM2k3SE_EN_nb0.crc & WM50_B_A01_X50v_WM2k3SE_EN_nb0.crc to DiMa_B_A01_X50v_WM5_EN_nb0.crc & DiMa_B_A01_X50v_WM5_EN_nb0. i copy these files on sd card and press wl+pw+reset and he read these images successufull. he asked me to press pw+reset, a pressed WL+PW+RESET and after that he dont want to boot but i can load sd loader (pressing wl+pw+reset) but he cant see wm5 OS image (WM50_K_A01_X50v_WM5_ENG.nb0).
now i will then copy on my sd card this boot loader Dell Axim X50v WM5 A02 Bootloader.zip and upload him on my axim x50v, and after that i will start OS upgrade with WM50_K_A01_X50v_WM5_ENG.nb0? is this what you mean?
i want to install english version of wm5 (there isnt croatian version), but i am seems to me stuck on wm2003se...
will this help what you have written to me? i dont want to make worst **** or it cant be worst
thnx
danijel
OK you want to install WM5 English, but what operating system is in the device? Its important to install the correct bootloader with the correct prefix. Then the SD Image Loader will see the operating system ROM.
now i will then copy on my sd card this boot loader Dell Axim X50v WM5 A02 Bootloader.zip and upload him on my axim x50v, and after that i will start OS upgrade with WM50_K_A01_X50v_WM5_ENG.nb0? is this what you mean?
Click to expand...
Click to collapse
Not, with WM50_K_A02_X50v_WM5_EN.nb0, I gived to you a rapidshare link with it, and inside the bootloader too, but if you had installed Dell Axim X50v WM5 A02 Bootloader.zip go to flash the SO directly.
When the so image isn't seen by the SD Image Loader, Im sure that its because its something wrong with the bootloader or SO prefix.
At the begining its a chaos, but when you understan how it work, its very simple. And a bootloader change its only needed to change from a 2003 SE version to WM5 or 6 and vice versa, not change needed to change between WM5 and WM6 and vice versa.
before and after I had wm2003se ao5, because only thing i made was upgrade boot loader (changed WM50_B_A01_X50v_WM5_ENG.nb0 to Dima_B_A01_X50v_WM5_ENG.nb0 and upgrade that successuful what he say, but after that he cant see os image WM50_K_A01_X50v_WM5_ENG.nb0).
you gave me this rapishare link (http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html) not for WM50_K_A02_X50v_WM5_EN.nb0 or iam missing something?
so whats your suggestion for me to do now? if i upload now Dell Axim X50v WM2003SE A05 Bootloader (rapid share link you gave me) will it start wm2003se just how it was before, because only thing i have upgraded was boot loader? because he now sees wm50_B_ but cant see files for os image. could you upload on rapidshare your WM5 OS image files to try with your or should i just try uploading wm200se a05 bootloader files?
danijel
drakic said:
before and after I had wm2003se ao5, because only thing i made was upgrade boot loader (changed WM50_B_A01_X50v_WM5_ENG.nb0 to Dima_B_A01_X50v_WM5_ENG.nb0 and upgrade that successuful what he say, but after that he cant see os image WM50_K_A01_X50v_WM5_ENG.nb0).
you gave me this rapishare link (http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html) not for WM50_K_A02_X50v_WM5_EN.nb0 or iam missing something?
so whats your suggestion for me to do now? if i upload now Dell Axim X50v WM2003SE A05 Bootloader (rapid share link you gave me) will it start wm2003se just how it was before, because only thing i have upgraded was boot loader? because he now sees wm50_B_ but cant see files for os image. could you upload on rapidshare your WM5 OS image files to try with your or should i just try uploading wm200se a05 bootloader files?
danijel
Click to expand...
Click to collapse
First, be sure that you write correctly the name, DiMa, WM50, etc..
Second, download this
Copy it to the SD Card, If the bootloader prefix es DiMa, rename it to WM50, because you already have the WM5 bootloader, and flash it, make a Hard Reset, and go to the SD Image Loader again, you must see the WM50_K_.. Try it
migatxu said:
First, be sure that you write correctly the name, DiMa, WM50, etc..
Second, download this
Copy it to the SD Card, If the bootloader prefix es DiMa, rename it to WM50, because you already have the WM5 bootloader, and flash it, make a Hard Reset, and go to the SD Image Loader again, you must see the WM50_K_.. Try it
Click to expand...
Click to collapse
so you mean to rewrite boot loader with a02, and after that press pw+wl+reset and again go to sd loader and run wm50_k_.... OS image?
1. copy wm50_B_a02...
2. run sd loader and write this wm50_B_a02... sd boot loader
3. press after that wl+pw+reset
4. read WM50_K_...
5. hard reset
is this write procedure?
thnx
1. copy wm50_B_a02...
2. Hard Reset
3. run sd loader and write this wm50_B_a02... sd boot loader
4. press after that wl+pw+reset
5. read WM50_K_...
6. hard reset
is this write procedure?
Try now
migatxu said:
1. copy wm50_B_a02...
2. Hard Reset
3. run sd loader and write this wm50_B_a02... sd boot loader
4. press after that wl+pw+reset
5. read WM50_K_...
6. hard reset
is this write procedure?
Try now
Click to expand...
Click to collapse
on 1. i mean to copy all files to sd card and first upload sd loader a02 and after that go to 2.
just to be sure that we are thinking same
I know that you mean that
Can you work it out?
migatxu said:
I know that you mean that
Can you work it out?
Click to expand...
Click to collapse
well, my friend it is working, i dont know how to thank you...
one last question, what image now i have to upload on him to have wm6, or it isnt matter?
i have downloaded these images from this site:
X50v_WM6_A02_PR1
X50v_WM6_A02_PR2
X50v_WM6_A02_RC1
X50v_WM6_A02_RC2
also have this (WM6_A02_RTM_By_Maglite_-_Zeus_Alex_Change_of_PP_to_0Mb ) but don want more troubles with him.
is there any procedure which file need to be first or i can just upgrade to last OS image with all fixes?
should i download first Download Dell Axim X50v WM6 A01 ROM and then go to Dell Axim X50v WM6 A02?
thnx very very much
danijel
You beat it! A very good new Drakic
Remember, you dont need to install the bootloader anymore, only if you have problems to boot, or if you want to install wm2003se.
Well, al these roms are older than the A02 RTM, my device has it, work very good! But I only have the original A02 Maglite with the 4mb of page pool, it works fine, now, I changed the page pool to 3mb with PPFE or something like this, is in the first post. More page pool = more fast and estable system, to use with many apps at time, but less free ram, less page pool, more free ram, but... vice versa, I only open 2 or 3 apps, and for now with a page pool of 3mb works fine, like with 4mb. For the firs time install the original 4mb page pool A02 RTM and test.
Ah, you can install the A02 RTM directly
thnx very much one more time for this help and help before. you saved my and life of my axim
danijel
you've now +100 experience Its funny to test all the available roms. Have you test WM5 A03 by MagLite? I invite to you It was a pleasure, now you can help to somebody with the same problem. Enjoy your X50v, you can install three different Windows Mobile versions! That's fantastic!
Nice to help you Danijel
Miguel
yes, now i have very very experience, two weaks old dell almost dead i think i will try first that wm6 a02 rtm, and after that 0mb PP. lot of them say it works great so i will try it...
it was pleasure working with you....
hear again, hope not when i have problem
danijel
My asus can't write to flash proces while upgrading
is show the following message,
BTLR 3.1
Start SD init
Get MBR success
can't find galaxymini-ond.raw!
can't find 850_GAX_SD.bin!
can't find FLASH.BIN!
can't find GSM.BIN!
can't find GSM.RAW!
can't find EXT_ROM.NBO!
valid packagercentage : 100
Read SD Busy !
Total 3 images in package
FLASH.BIN in package!
GSM.BIN in package!
EXT_ROM.NBO in package!
and can't proses write to flash
when i turn on device just shows post scren
BTLR 3.1 and no ROM message
Please Help......
thanks!
My Asus P320 can't boot too ...
I only finished with a boot blue screen during boot processing ..
Only see Asus logo and sologan, BLTR 3.1, ROM 4.15.0_1015_WWE_WWE and no more ...
I try to flash with P320_V4_15_0_V4_10_V1_11_0_WWE but i get Header_CRC_error ...
Please help me to solve it .My phone do not start Windows Mobile now ... Thank you ...
Even i am getting the same error. My writing % goes till 66% then again starts back writing...then later only boot screen but no next step....
can anybody have solution for same...waiting...
Yeah ...
I try many way and i get succeed...
First, i use ROM 4.10... to reflash... It may be good ... After, i upgrade my rom to the latest.. You can try it ... Good luck ...
please help to solve this "read sd busy".
my P320 cant boot, somebody can write the program for this P320 to using sd card format the nand flash of p320 before firmware flash in the rom of P320? thanks!
i need help with this too, i get stuck at
total 3 images in package
flash.bin in package!
gsm.bin in package!
ext_rom.nb0 in package!
Hello,
I try to update my Excalibur with RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 rom, but the communication between my laptop and my phone got lost. Now I only can boot my phone in bootloader.
I try to load the same rom, and I download the original rom, but I obtain the following errors:
The file is corrupted
INVALID VENDER ID
Some one can help me please
run auto and follow instruction but if you flash your phone under windows vista or win7 Rom update process may be corrupted. I had same problem with win7 and vista , I can flash my rom under windowsxp now .
lenoxcr said:
Hello,
I try to update my Excalibur with RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 rom, but the communication between my laptop and my phone got lost. Now I only can boot my phone in bootloader.
I try to load the same rom, and I download the original rom, but I obtain the following errors:
The file is corrupted
INVALID VENDER ID
Some one can help me please
Click to expand...
Click to collapse
Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=540492 . Hope that helps
error 270
RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 is error 270
goer's d ignasia said:
RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 is error 270
Click to expand...
Click to collapse
Take your time to read the sticky & use the search.... It's a question that get asks so many times and answered so many too...
Hello,
After a flash of GenY 1.1 by MTTY (and internal storage) the flash stop at 71% with a 226 error.
Now I can't flash HardSPL (flash goes to 100% but the version of my HSPL in bootloader still the same !). I can't flash on official rom (stop at 61% with same error code).
Anyone now if it's possible to do something for that ?
Thanks
PS : sorry for my english !
I can never change my hardspl without using the jumpspl technique as in link below for hardspl 1.24
http://forum.xda-developers.com/showthread.php?t=408621
It always stays the same despite reaching 100%
HTH
Bixx
Try:
http://forum.xda-developers.com/showpost.php?p=1518700&postcount=11
Hi !
I've tried to flash HSPL 1.24 but like my phone doesn't boot, I can't copy and execute JumpSPL.exe and the RomUpdateUtility can't flash the HSPL.
JR_de > i's for the trinity, the 1.20 Olipro it's not for diamond, and I'm no SuperCID.
I've tried with 1.40 Olinex Unsigned with mtty command in your link but still the same error when I flash an official rom (2.03.406....)
thanks for your answers
try to change the usb port from pc and still try yr phone is not brick
I try with another usb port, and another computer, the results it's the same !
tom62 said:
I try with another usb port, and another computer, the results it's the same !
Click to expand...
Click to collapse
ever tried to change the usb cable?
Yes I try to flash with a second usb cable....
I believe there is no solution !
OS?
On what OS are you trying this?
Windows XP / Vista / 7 32bit? 64Bit?
Try this: http://forum.xda-developers.com/showthread.php?t=578231
is there a bootble ROM on it?
if so , download a stock image from HTC and copy to top level of your 4GB
reset and press the enter and back buttons
follow on screen instructions
i recomend that you flash like this, much safer
good luck
hello, happy new year everybody !!
there is no bootble ROM on my diamond.
I have no access to the internal storage, I can't copy a nbh file on it.
I try to flash an hspl with change .nbh after click on the first "next" in the customRuu, but the version of the hspl always doesn't change, and error 260 when I flash an OS rom...
nobody has a solution ?!
Try and flash back to stock SPL, check my sig
after that, try and flash stock OS
if either fail, send to HTC
Good Luck
Badwolve1