problem with os image on axim x50v - Upgrading, Modifying and Unlocking

i have a little problem with flashing my dell. before upgrading on him was wm2003se and i have downloaded a05 version of 2003se from dell web page. i tried to upgrade to wm5 and renamed WM50_B_A01_X50v_WM5_ENG_nb0.crc to DiMa_B_A01_X50v_WM5_ENG_nb0.crc and WM50_B_A01_X50v_WM5_ENG.nb0 to DiMa_B_A01_X50v_WM5_ENG.nb0. upgrading boot loader went successuful and after i press wl+pw+reset it starts sd loader but he cant see any os image (WM50_K_A01_X50v_WM5_ENG.nb0).
i tried to copy following files on sd card but he only see first image (boot loader image):
WM50_B_A01_X50v_WM5_ENG.nb0
WM50_B_A01_X50v_WM5_ENG_nb0.crc
WM50_K_A01_X50v_WM5_ENG.nb0
WM50_K_A01_X50v_WM5_ENG_nb0.crc
how to make him to run and see os image?
help
danijel

can anybody help me? why and how to make him to recognize OS image files (WM50_K_A01_X50v_WM5_ENG.nb0)?
i`am desperate....

you either need tzhe official Rom-Upgrade for WM5 (dell sold it once, now it may be available on ebay.)
the problem of yours is : you have wm2003se, so you have also the wm2003se bootloader (the dima_b_XXX-files) and just renaming the wm5-bootloader won't help, as it's different. and btw, i think for upgrading from wm2003se to wm5, you need the A00-image - the rest are just updates for wm5.

satani said:
you either need tzhe official Rom-Upgrade for WM5 (dell sold it once, now it may be available on ebay.)
the problem of yours is : you have wm2003se, so you have also the wm2003se bootloader (the dima_b_XXX-files) and just renaming the wm5-bootloader won't help, as it's different. and btw, i think for upgrading from wm2003se to wm5, you need the A00-image - the rest are just updates for wm5.
Click to expand...
Click to collapse
where could i download these files? i want to back to wm2003, so where i can download boot loader for and OS image fo wm2003?
i have made a backup of my OS but it extension is .RIS and dont know how to recover it, and also have a backup of boot loader of wm2003. what if i just recover my boot loader will it work because after flashing bootloader of wm5 it stop working? how could i use that .RIS file (34MB)?
please help me, i am a new in this area

drakic said:
where could i download these files? i want to back to wm2003, so where i can download boot loader for and OS image fo wm2003?
i have made a backup of my OS but it extension is .RIS and dont know how to recover it, and also have a backup of boot loader of wm2003. what if i just recover my boot loader will it work because after flashing bootloader of wm5 it stop working? how could i use that .RIS file (34MB)?
please help me, i am a new in this area
Click to expand...
Click to collapse
Code:
http://forum.xda-developers.com/showpost.php?p=1535377&postcount=1175
Code:
http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html
Just put the files on the SD Card, What have you actually installed? WM5 or 6 ? Then just rename de DiMa_B_ to WM50_B_ and flash as its written on the first post, I think that I put a guide inside the rar. I hope you win

Ah, you can make it using another way too. Go to dell page, support, download drivers... electronic, choose Axim, and X50. There, download the downgrade from WM5 to WM2003SE in your language, the rom I gived you before is the english version, maybe you want another language. Extract that exe with winrar or simply ejecute it, and dont continue, quit, go to c:/Dell... ROM and inside you will se a rom.IMG. Well, you need img2nb0f.exe, to convert the .IMG to .nb0
When you get he .nb0 file you have to create his _nb0.crc Maybe CRC Calculator help you or simple put the files on the SD Card and when you choose the SO image ( _K_ ) it will show you a CRC error, simple copy the good CRC, modify on the file on your PC, and put it again on the SD Card.
I could make it for you (if you dont know what are you doin), if your language isn't english.
This is only if your language isn't english, remember, if its english its more easy and save time, read the post #5

migatxu said:
Code:
http://forum.xda-developers.com/showpost.php?p=1535377&postcount=1175
Code:
http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html
Just put the files on the SD Card, What have you actually installed? WM5 or 6 ? Then just rename de DiMa_B_ to WM50_B_ and flash as its written on the first post, I think that I put a guide inside the rar. I hope you win
Click to expand...
Click to collapse
before anything i have wm2003se a01, then upgrade to a05,after that i downloaded wm5 boot loader and renamed WM50_B_A01_X50v_WM2k3SE_EN_nb0.crc & WM50_B_A01_X50v_WM2k3SE_EN_nb0.crc to DiMa_B_A01_X50v_WM5_EN_nb0.crc & DiMa_B_A01_X50v_WM5_EN_nb0. i copy these files on sd card and press wl+pw+reset and he read these images successufull. he asked me to press pw+reset, a pressed WL+PW+RESET and after that he dont want to boot but i can load sd loader (pressing wl+pw+reset) but he cant see wm5 OS image (WM50_K_A01_X50v_WM5_ENG.nb0).
now i will then copy on my sd card this boot loader Dell Axim X50v WM5 A02 Bootloader.zip and upload him on my axim x50v, and after that i will start OS upgrade with WM50_K_A01_X50v_WM5_ENG.nb0? is this what you mean?
i want to install english version of wm5 (there isnt croatian version), but i am seems to me stuck on wm2003se...
will this help what you have written to me? i dont want to make worst **** or it cant be worst
thnx
danijel

OK you want to install WM5 English, but what operating system is in the device? Its important to install the correct bootloader with the correct prefix. Then the SD Image Loader will see the operating system ROM.

now i will then copy on my sd card this boot loader Dell Axim X50v WM5 A02 Bootloader.zip and upload him on my axim x50v, and after that i will start OS upgrade with WM50_K_A01_X50v_WM5_ENG.nb0? is this what you mean?
Click to expand...
Click to collapse
Not, with WM50_K_A02_X50v_WM5_EN.nb0, I gived to you a rapidshare link with it, and inside the bootloader too, but if you had installed Dell Axim X50v WM5 A02 Bootloader.zip go to flash the SO directly.
When the so image isn't seen by the SD Image Loader, Im sure that its because its something wrong with the bootloader or SO prefix.
At the begining its a chaos, but when you understan how it work, its very simple. And a bootloader change its only needed to change from a 2003 SE version to WM5 or 6 and vice versa, not change needed to change between WM5 and WM6 and vice versa.

before and after I had wm2003se ao5, because only thing i made was upgrade boot loader (changed WM50_B_A01_X50v_WM5_ENG.nb0 to Dima_B_A01_X50v_WM5_ENG.nb0 and upgrade that successuful what he say, but after that he cant see os image WM50_K_A01_X50v_WM5_ENG.nb0).
you gave me this rapishare link (http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html) not for WM50_K_A02_X50v_WM5_EN.nb0 or iam missing something?
so whats your suggestion for me to do now? if i upload now Dell Axim X50v WM2003SE A05 Bootloader (rapid share link you gave me) will it start wm2003se just how it was before, because only thing i have upgraded was boot loader? because he now sees wm50_B_ but cant see files for os image. could you upload on rapidshare your WM5 OS image files to try with your or should i just try uploading wm200se a05 bootloader files?
danijel

drakic said:
before and after I had wm2003se ao5, because only thing i made was upgrade boot loader (changed WM50_B_A01_X50v_WM5_ENG.nb0 to Dima_B_A01_X50v_WM5_ENG.nb0 and upgrade that successuful what he say, but after that he cant see os image WM50_K_A01_X50v_WM5_ENG.nb0).
you gave me this rapishare link (http://rapidshare.com/files/58078830/WM2003SE_A05_EN_X50v.rar.html) not for WM50_K_A02_X50v_WM5_EN.nb0 or iam missing something?
so whats your suggestion for me to do now? if i upload now Dell Axim X50v WM2003SE A05 Bootloader (rapid share link you gave me) will it start wm2003se just how it was before, because only thing i have upgraded was boot loader? because he now sees wm50_B_ but cant see files for os image. could you upload on rapidshare your WM5 OS image files to try with your or should i just try uploading wm200se a05 bootloader files?
danijel
Click to expand...
Click to collapse
First, be sure that you write correctly the name, DiMa, WM50, etc..
Second, download this
Copy it to the SD Card, If the bootloader prefix es DiMa, rename it to WM50, because you already have the WM5 bootloader, and flash it, make a Hard Reset, and go to the SD Image Loader again, you must see the WM50_K_.. Try it

migatxu said:
First, be sure that you write correctly the name, DiMa, WM50, etc..
Second, download this
Copy it to the SD Card, If the bootloader prefix es DiMa, rename it to WM50, because you already have the WM5 bootloader, and flash it, make a Hard Reset, and go to the SD Image Loader again, you must see the WM50_K_.. Try it
Click to expand...
Click to collapse
so you mean to rewrite boot loader with a02, and after that press pw+wl+reset and again go to sd loader and run wm50_k_.... OS image?
1. copy wm50_B_a02...
2. run sd loader and write this wm50_B_a02... sd boot loader
3. press after that wl+pw+reset
4. read WM50_K_...
5. hard reset
is this write procedure?
thnx

1. copy wm50_B_a02...
2. Hard Reset
3. run sd loader and write this wm50_B_a02... sd boot loader
4. press after that wl+pw+reset
5. read WM50_K_...
6. hard reset
is this write procedure?
Try now

migatxu said:
1. copy wm50_B_a02...
2. Hard Reset
3. run sd loader and write this wm50_B_a02... sd boot loader
4. press after that wl+pw+reset
5. read WM50_K_...
6. hard reset
is this write procedure?
Try now
Click to expand...
Click to collapse
on 1. i mean to copy all files to sd card and first upload sd loader a02 and after that go to 2.
just to be sure that we are thinking same

I know that you mean that
Can you work it out?

migatxu said:
I know that you mean that
Can you work it out?
Click to expand...
Click to collapse
well, my friend it is working, i dont know how to thank you...
one last question, what image now i have to upload on him to have wm6, or it isnt matter?
i have downloaded these images from this site:
X50v_WM6_A02_PR1
X50v_WM6_A02_PR2
X50v_WM6_A02_RC1
X50v_WM6_A02_RC2
also have this (WM6_A02_RTM_By_Maglite_-_Zeus_Alex_Change_of_PP_to_0Mb ) but don want more troubles with him.
is there any procedure which file need to be first or i can just upgrade to last OS image with all fixes?
should i download first Download Dell Axim X50v WM6 A01 ROM and then go to Dell Axim X50v WM6 A02?
thnx very very much
danijel

You beat it! A very good new Drakic
Remember, you dont need to install the bootloader anymore, only if you have problems to boot, or if you want to install wm2003se.
Well, al these roms are older than the A02 RTM, my device has it, work very good! But I only have the original A02 Maglite with the 4mb of page pool, it works fine, now, I changed the page pool to 3mb with PPFE or something like this, is in the first post. More page pool = more fast and estable system, to use with many apps at time, but less free ram, less page pool, more free ram, but... vice versa, I only open 2 or 3 apps, and for now with a page pool of 3mb works fine, like with 4mb. For the firs time install the original 4mb page pool A02 RTM and test.
Ah, you can install the A02 RTM directly

thnx very much one more time for this help and help before. you saved my and life of my axim
danijel

you've now +100 experience Its funny to test all the available roms. Have you test WM5 A03 by MagLite? I invite to you It was a pleasure, now you can help to somebody with the same problem. Enjoy your X50v, you can install three different Windows Mobile versions! That's fantastic!
Nice to help you Danijel
Miguel

yes, now i have very very experience, two weaks old dell almost dead i think i will try first that wm6 a02 rtm, and after that 0mb PP. lot of them say it works great so i will try it...
it was pleasure working with you....
hear again, hope not when i have problem
danijel

Related

Help

I was unlocking my AT&T SX56 and the rom upgrade just stoped and I could not do anything to mak eit start up again. Now The pocket PC has upgrading rom always on the screen and I can gt active sync to even see the pc to try and flash it or upgrade the rom again. If you have any info you think that might help would be great. Thank you for your help.
If you still can get to the bootloader screen (power + soft reset), you can cook a new ROM as nbf file and use the SD flashing method.
Cool man I can get to that screen and will give that a go
Ok got a SD card and put on a new rom how can I make it load the info from th card. Also everytime I try and make a nbf file type it erros on me.
./mkrom.sh: ../../kitchen.local/mkrom-inc.sh: No such file or directoryno files for configid 26220739write xip block starting at 81800000, with 3 fileswrite xip block starting at 81980000, with 0 filesheader : No such file or directoryError creating new rom
I picked nb1 said was for flashing with SD card and can't get it to load.

Asus P535 upgrade WM6 failed, now half bricked.

My P535, 71A version. upgrade WM6 HK version from 4.3.25 HK00.
I used a 256MB miniSD with quick formatted( it's the main reason). extract the upgrade file on it. and start the upgrade procedure.
1st step: insert the miniSD into slot. autorun started and asked to confirm. sure. confirm it.
2nd step: system starting upgrade the bootloader, read, verify, and update ok. it ask to reset with power button pressed. do as requested.
Like attachment 111.jpg
3rd step: the bootloader entered a new uploader version with "force mode" displayed. and loading the main upgrade file ASUSP535.CAP. but checksum failed. it it asked to reset with power button pressed again. do as requested.
Like attachment 222.jpg , I failed at checksum because the miniSD only quickformatted
then the nightmare came. I can't see the blue asus screen. and nothing happen when I press reset. the only valid operations are Power+Camera+Recorder + reset to the SD download mode, and Power+Camera + reset to the USB sync mode. in the SD download mode. system not recognize the *.cap file. it request a NB0 file.
What should I do?
1. Enter the Force mode again with a good formatted miniSD is the best way. but how?
2. Use the USB sync mode upgrade the file, it maybe works. but I can't find the usbloader. in my memory. there is one in the lifeforce cooked ROM pack. but it removed when I visit lifeforce's site today. anyone who download the rom pack before please give me the file. I need a try.
-------------------------updated on 9th Jul 2007---------------------------------------
My P535 has been recovered.
just use a modfied 4.3.25 HK00 NB0 file at the SD download mode, it can reverse to WM5, then repair the extend firm. don't reset, direct run 4.3.25 offical update. switch to another sd card with WM6 upgrade ASUSP535.CAP when it reboot to the sd download update screen. and all will go on.
find an old rom on asus ftp or site.
Rename the rom to galaxyII.nb0
Copy it to the card.
Boot your phone with the card in SD download mode.
The upgrade will start.
Good luck.
For me after the autorun, i pressed ok to restart but the phone still block at the blue screen. I try to reset in sd loader with the new rom in sd, with the galaxy name, and the rom is to big for the phone...
ilan_75 said:
find an old rom on asus ftp or site.
Rename the rom to galaxyII.nb0
Copy it to the card.
Boot your phone with the card in SD download mode.
The upgrade will start.
Good luck.
For me after the autorun, i pressed ok to restart but the phone still block at the blue screen. I try to reset in sd loader with the new rom in sd, with the galaxy name, and the rom is to big for the phone...
Click to expand...
Click to collapse
I had tried as you said. put 4.3.25 HK CAP file on the minSD, and rename it with NB0, but it not work, it return red words with" Wrong Language Version, Update fail!" the system is the HK before update WM6
You may try try here...
http://www.asuspda.net/thread-17850-1-1.html
but not sure does it 100% work...
Good Luck!
Hello,
I've attached the requested tool - and... good luck
A_C said:
You may try try here...
http://www.asuspda.net/thread-17850-1-1.html
but not sure does it 100% work...
Good Luck!
Click to expand...
Click to collapse
thanks, but that's not what I need, because I can't enter the OS already...
windirt said:
thanks, but that's not what I need, because I can't enter the OS already...
Click to expand...
Click to collapse
It is picked from that archive...
lukacs.attila said:
Hello,
I've attached the requested tool - and... good luck
Click to expand...
Click to collapse
sigh... I tried with usb sync, the 79MB cap file can't transfer completely. it just transfered 55MB and stopped.
windirt said:
sigh... I tried with usb sync, the 79MB cap file can't transfer completely. it just transfered 55MB and stopped.
Click to expand...
Click to collapse
I have no idea, but maybe it is because you already upgraded the bootloader?
lukacs.attila said:
I have no idea, but maybe it is because you already upgraded the bootloader?
Click to expand...
Click to collapse
Yes. the first upgrade step is completed, the bootloader version is changed to 2007/04/16.
when I press Power+Rec+UP and reset, it got a Force mode USB Sync. not like the ordinary USB Sync enabled by Power+Rec and reset.
is there a way to get a Force mode with SD Download? so I can use the 79MB CAP if it accessable.
windirt said:
Yes. the first upgrade step is completed, the bootloader version is changed to 2007/04/16.
when I press Power+Rec+UP and reset, it got a Force mode USB Sync. not like the ordinary USB Sync enabled by Power+Rec and reset.
is there a way to get a Force mode with SD Download? so I can use the 79MB CAP if it accessable.
Click to expand...
Click to collapse
Correct me if I am wrong, but there's something written @ asus support site, where you can download the new firmware (it's a step by step how-to). Unfortunately, the support site is down at the moment.
Please follow the below procedures to upgrade:
1.Please format your Mini-SD first.
2.Unzip the file and copy it to Mini-SD card's root folder
(Under Mini-SD's root folder, there should only be folder 2577, AsusP535.cap, and GalaxyII.cap;
In folder 2577, there should only be Autorun.exe).
3.Insert the Mini-SD with upgrade firmware into P535's expansion slot and wait for firmware to setup automatically.
If the firmware didn't execute automatically, please execute Autorun.exe in Storage Card\2577\.
4.Click "System" => "Update ROM"
5.System will enter update mode, here the first part of upgrade will start.
Warningo not interrupt the upgrade process. Please execute the rest of the steps until completing step 8 in order
for the unit to execute normally. After the upgrade is complete, a message in red will be displayed.
Please press and hold power button and reset at the same time to start second part of upgrade.
6.After reboot, it will automatically enter update mode. This upgrade takes about 3 mins, please wait patiently.
Please do not interrupt the upgrade process. After upgrade is done, system will reboot automatically.
7.After reboot, it will install extended ROM automatically. After upgrade is done, system will reboot automatically.
8.Please Confirm version in "Start"=>"Setting"=>"System"=>"System Information"=>"Version".
lukacs.attila said:
Please follow the below procedures to upgrade:
1.Please format your Mini-SD first.
2.Unzip the file and copy it to Mini-SD card's root folder
(Under Mini-SD's root folder, there should only be folder 2577, AsusP535.cap, and GalaxyII.cap;
In folder 2577, there should only be Autorun.exe).
3.Insert the Mini-SD with upgrade firmware into P535's expansion slot and wait for firmware to setup automatically.
If the firmware didn't execute automatically, please execute Autorun.exe in Storage Card\2577\.
4.Click "System" => "Update ROM"
5.System will enter update mode, here the first part of upgrade will start.
Warningo not interrupt the upgrade process. Please execute the rest of the steps until completing step 8 in order
for the unit to execute normally. After the upgrade is complete, a message in red will be displayed.
Please press and hold power button and reset at the same time to start second part of upgrade.
6.After reboot, it will automatically enter update mode. This upgrade takes about 3 mins, please wait patiently.
Please do not interrupt the upgrade process. After upgrade is done, system will reboot automatically.
7.After reboot, it will install extended ROM automatically. After upgrade is done, system will reboot automatically.
8.Please Confirm version in "Start"=>"Setting"=>"System"=>"System Information"=>"Version".
Click to expand...
Click to collapse
Yes, it stopped in step6 as you posted, checksum error.
Upgrade WM6 critical problem
I was trying to upgrade my ASUS P535 rom from V4.3.15 WWWEL_RU to firmware V4.7.12 WWE_TH00
I unzipped the P535_V4712_WWE_TH00_EXT_V120 and copied the files produced to the miniSD card except from file AsusP535.cap
I renamed file GALAXYII.cap to GALAXY.cap and copied it again to miniSD card. Also I copied file ASUS.UnlockLangID to folder 2577 and replaced autorun. (P535 ROM Tools.zip from http://forum.xda-developers.com/showthread.php?t=295778&page=3)
So in miniSD card there are the following files: 2577 folder with autorun and unlocklangid.exe, and in the root, GalaxyII.cap and GALAXY.cap but NOT AsusP535.cap
So I run the update and after the reset I get message ASUSP35.CAP NOT FOUND.
At that point I realise my stupidity (not copying AsusP535.cap to miniSD) so I take the card out, put it in my laptop and copy the AsusP535.cap to mini SD.
I reset the device and stick the card in but I still get the same message ASUSP35.CAP NOT FOUND.
Every time I turn on my device it tries to upgrade rom and I get the mesage. Can someone help please or have I damaged the device beyond repair?
2 mins ago I upgraded my taiwanese p535 to the thailand wm6 rom.
I had already installed a 4.3.15 wwe version, so I figured I could just install the 4.7.12 wwe TH rom without using the "hacked autoexec".
That didn't work, and I was stuck with the blue asus screen.
So I pushed up (on the d-pad) + reset, then "green phone button" (answer button) when it asked if I wanted to.
then reset the phone as soon as it said "performing upgrade" or something like that (when it started installing stuff after windows was booted).
After reboot, I was back at my old 4.3.15 rom.
Then I decided to retry it, following the instructions here:
http://forum.xda-developers.com/showpost.php?p=1352033&postcount=77
(the link to the p525 tools is incorrect. It should be: http://rapidshare.com/files/4612627/ASUS_P525_v3.32.WWE.customized.build.06.zip.html
Edit: The link to the thai wwe rom is incorrect too, it should be: http://dlsvr01.asus.com/pub/ASUS/IA/P535/P535_V4712_WWE_TH00_EXT_V120.rar)
When I followed these instructions the upgrade worked perfectly. I now have 4.7.12 wwe_au00 installed
I can't give any guarantees, And it may be that I was just lucky, but I suggest you try to remove the miniSD, then push up+reset, press "answer button" when it wants you to confirm, and then, after it reboots, press the reset button as soon as it starts the "upgrade". Then (I hope) it will revert back to your previously installed OS.
After that, upgrade to wm6 following the procedure in the link I pasted above.
extract nb0 from cap for asus p535:
wm5:
xda2nbftool.exe -x galaxyII.cap galaxy2.nba 0xA87BC0d5
wm6:
xda2nbftool.exe -x asusp535.cap asusp535.nba 0xa87ba0d5
.nba from .nb0 seems differs for 4 bytes
.nba - first 4 bytes = .nb0
(check it /in device upgrade may be significant - don't knew (i'm use other device)/ )
.nba, .nb0 - standard files as for oher devices - can make modified firmware images as for other ...
I can't give any guarantees, And it may be that I was just lucky, but I suggest you try to remove the miniSD, then push up+reset, press "answer button" when it wants you to confirm, and then, after it reboots, press the reset button as soon as it starts the "upgrade". Then (I hope) it will revert back to your previously installed OS.
After that, upgrade to wm6 following the procedure in the link I pasted above.[/QUOTE]
Unfortunately, when I press up+reset I dont get the option to confirm, it just goes immediately to the same message ASUSP35.CAP NOT FOUND
DaLiV said:
extract nb0 from cap for asus p535:
wm5:
xda2nbftool.exe -x galaxyII.cap galaxy2.nba 0xA87BC0d5
wm6:
xda2nbftool.exe -x asusp535.cap asusp535.nba 0xa87ba0d5
.nba from .nb0 seems differs for 4 bytes
.nba - first 4 bytes = .nb0
(check it /in device upgrade may be significant - don't knew (i'm use other device)/ )
.nba, .nb0 - standard files as for oher devices - can make modified firmware images as for other ...
Click to expand...
Click to collapse
I am sorry but I dont understand the solution you are suggesting
Could you please explain?
ntiouk said:
Unfortunately, when I press up+reset I dont get the option to confirm, it just goes immediately to the same message ASUSP35.CAP NOT FOUND
Click to expand...
Click to collapse
Hold the up button, then press reset while still holding the up button.
are you sure it says "ASUSP35.CAP"?
It doesn't say "ASUSP535.CAP"?
.nb0 - it's another way t program device
press photo + reset - that asks file - resulted .nb0 file for wm5 or wm6 name as device wants - write that to sd (not sdhc) card formatted as fat16 - and insert it to device.

Problem after flashing Trinity with rom Ausdim WM6.1 V3

Hello everybody, actually I flashed my trinity with rom Ausdim WM6.1 V3 LIGHT , but i found a problem with this rom, in fact, in my device, i can not install or execute any other application, so i tried to flash an other rom (Mary SL 3.7) but in vain, i tried with SSPL-Trin but i coudn't execute it from my pda ( a problem of a security certificate or something like that) and when I push power+Camera+reset , i can access to the bootloader spl-1.07.0000 but when i try to flash , the operation stops at 2% and i receive an error : file corrupted. I tried with other cooked roms but i have always the same problem. An the last thing i've tried was trying to flash system from the minisd card, i formatted it to fat32 an i put the file TRINIMG.nbh but when i boot in bootoader it shows a message "loading..." then it shows a number "00068002", so could you please help me and thank you
=======Problem solved==========
Hi!
Can you please post how you solved the problem, to help other people that maybe have this situation in a future?
Thanks!
Actually i realized that i coudn't flash any other rom with the original SSPL, so i had the idea to try with the original htc wm5, and it worked.
you really need to flash hard-spl as well.. you're playing with fire

Need Help "unbricking" my friends phone

Friend got a vogue but he "bricked it" he doesnt even remember what he did,
he is very new at this and looks like he did a rom update without doing a radio update first.
i have an HTC titan but i am going to buy this vogue off of him if i can fix it.
so here is the issue...
when u start the goes it goes to the 3 color tri-color boot screen...
it goes right there without even me holding down the power and camera buttons.
i used mtty to get it out of that screen... i do set 16 0 and some other thing i can't remember for the life of me now in mtty
i reboot the phone and now it get the a custom Dette clean rom 6.1 splash screen but it says no Radio and it now just stuck there.
i tried to load the stock rom on a 2 gig fat32 formated flash card and inserted it into the phone. then boot it to the 3 color screen, and it just says no file! in gray backbground then goes back to the tri color screen...
i made sure the name was correct.. i tried "Voguimg.nbh" i tried "voguimg." and just "voguimg" then i tried it in all caps and then all first letter cap then rest lower case...
it is spl-2.01.1000
i think my friend flashed the rom without upgrading the spl as well.
i tried to flast it with sp 2.31 but i couldnt get it to load it. i guess i can't flasth to 2.31 in the tri color screen...
any ideas? any help would be greatly apreciated. spent about a week on this... probably about 2 to 3 hours reading and reseaching daily.
Duplicate msg
I even tried to stock vogue roms (this is a verizon phone)
but i tried even the following sprint stock roms:
RUU_Vogue_SPRINT_WWE_1.12.651.1_2.13.00_SPC_NV133_Ship.exe
this gets me to 1% then errors out
and says error 328 invalid command, this update utility can not be used with my phone. please check my update utility... wat
RUU_PPST_Vogue_SPRINT_WWE_3.03.651.2_Radio_3.42.30_AM_NV_2.04_Ship.exe
this one stays at 0%
tried the verizon stock rom...
which stays at 0%
i dont know if the spl has something to do with it but i read the first file i mentioned the stock rom 1.12... reloads the spl, boot loader, everything to original.
I noticed when I first flashed my phone, also xv6900, that when I was unlocking, I didn't fully complete it, and it showed SPL version 2.10, or something along that line.
There is no stock VZW ROM available, so that's a waste of time. I think the first problem is, you have no idea how it got that way. I'd assume your friend didn't complete the unlocking process, then ran the RUU for the new ROM.
I'm not 100% sure, hopefully someone can either correct me on this, or confirm.
You should be ok since you can enter the bootloader. Perhaps you could try relocking it, you would use ImCokeMan's relocker, should be SPL version 0.43. Then you could try unlocking again.
I'd suggest checkin at PPCGeeks, asking in either the general Vogue flashing threads, or try asking ImCokeMan himself.
i will try .43, i am trying .41 but it keeps saying no device connected would you like to try copying again?
on this screen :
*
* Vogue/Sprint Touche CID unlocker utility
*
* Total process may take about 5-10 minutes depends on CPU speed.
*
Connect your device via activesync before continuing.
Press any key to continue . . .
Initializing..
wow fixed it. it wsa something so simple. must do quick format rather than full format on the mirco sd card....
meh
chewbaaka said:
wow fixed it. it wsa something so simple. must do quick format rather than full format on the mirco sd card....
meh
Click to expand...
Click to collapse
Good to hear! For future references could explain step by step what you did to solve it?
Thanks!
actually i thought it was working... but now it is stuck at the
"Loading... " screen
i have verizon... using a verizon signed ruu
when i use a sprint signed ruu it says
Loading...
then in 2 seconds... it says
Checking...
then in a few seconds it says....
Not Allowed...
then goes back to the tri- color screen
ill let it stay at Load... and then goto sleep and see if it finished tomorrow morning before football starts
unbricking ur phone
Unbricking Vogue / and downgrading SPL
--------------------------------------------------------------------------------
Edited *This will help those that are stuck at the HTC welcome screen and cannot get past it to load IMCokeMan's Unlocker.**
Edit by ImCoKeMaN: If you are stuck in bootloader (3 color screen) use titanexitbl or mtty (set 16 0 then task first and try these steps only if that doesn't work.
Apparently you can not use SDHC cards with this method, please use the 512mb card that came with your phone.
I have successfully unbricked my phone due to updating the Alltel rom to a non Alltel Vogue, before IMCokeman had released his unlocker an also have downgraded to the previous SPL version. I will shortly update this post with the How to instructions. I just need to retrace my steps.
I would first like to thank IMCokeMan for his help and unlocker.
I currently have a Sprint Vogue but I assume this will work for all versions
For those that had loaded the Alltel rom without the unlocker and have bricked there phone try this procedure to unbrick your phone.
1. First download IMCokeMaN's 2.31 Unlocker. http://rapidshare.com/files/11019074...r_MFG_2.31.exe
2. Extract IMCokeMan's unlocker
Previous SPL version was 2.31 current SPL version is 0.36
Edit by ImCoKeMaN:
Note: Steps 3, 4 and 5 should not be necessary, but step 6 is critical that it is a signed rom from your carrier
3. Navigate to the extracted folder and within the folder you will find the following file called VOGUIMAG2.nbh and rename it to VOGUIMG.nbh
4. Copy the file to a fat32 memory card, and insert it back into your phone, and place it into bootloader mode.
5. The phone should display Loading... let it sit there for a minute or so. It will not go past this screen, now reboot the phone.
6. Extract your official rom using WINRAR by right click and extract files (Must be a signed EXE from your carrier get it from HTC support website)
7. Navigate to the extracted folder and within the folder you will find the files
8. Copy the files to your memory card (less than 2gb and formated fat32) and insert it back into the phone and place it back into bootloader mode(POWER+CAMERA+RESET USING STYLUS), and install the your Carrier's Official ROM.
I have attached the VOGUIMG.nbh file for those that are having problems.
patelaquib said:
Unbricking Vogue / and downgrading SPL
--------------------------------------------------------------------------------
Edited *This will help those that are stuck at the HTC welcome screen and cannot get past it to load IMCokeMan's Unlocker.**
Edit by ImCoKeMaN: If you are stuck in bootloader (3 color screen) use titanexitbl or mtty (set 16 0 then task first and try these steps only if that doesn't work.
Apparently you can not use SDHC cards with this method, please use the 512mb card that came with your phone.
I have successfully unbricked my phone due to updating the Alltel rom to a non Alltel Vogue, before IMCokeman had released his unlocker an also have downgraded to the previous SPL version. I will shortly update this post with the How to instructions. I just need to retrace my steps.
I would first like to thank IMCokeMan for his help and unlocker.
I currently have a Sprint Vogue but I assume this will work for all versions
For those that had loaded the Alltel rom without the unlocker and have bricked there phone try this procedure to unbrick your phone.
1. First download IMCokeMaN's 2.31 Unlocker. http://rapidshare.com/files/11019074...r_MFG_2.31.exe
2. Extract IMCokeMan's unlocker
Previous SPL version was 2.31 current SPL version is 0.36
Edit by ImCoKeMaN:
Note: Steps 3, 4 and 5 should not be necessary, but step 6 is critical that it is a signed rom from your carrier
3. Navigate to the extracted folder and within the folder you will find the following file called VOGUIMAG2.nbh and rename it to VOGUIMG.nbh
4. Copy the file to a fat32 memory card, and insert it back into your phone, and place it into bootloader mode.
5. The phone should display Loading... let it sit there for a minute or so. It will not go past this screen, now reboot the phone.
6. Extract your official rom using WINRAR by right click and extract files (Must be a signed EXE from your carrier get it from HTC support website)
7. Navigate to the extracted folder and within the folder you will find the files
8. Copy the files to your memory card (less than 2gb and formated fat32) and insert it back into the phone and place it back into bootloader mode(POWER+CAMERA+RESET USING STYLUS), and install the your Carrier's Official ROM.
I have attached the VOGUIMG.nbh file for those that are having problems.
Click to expand...
Click to collapse
these instructions do not seem to work me.
he has a sprint phone... he assumes it works for all types but i have a verizon phone... and on a signed verizon nbh file ... it only says loading... and gets stuck there... on step 6... and a sprint rom says loading.. and then says checking right away and then says not allowed in red and goes back to the 3 color screen.
also the poster of this mentions he has spl 2.31... my spl says spl-2.01.1000 which is not .40 .41 or 2.31 (the most comment spl's i have seen referenced)
has anyone ran into these conditions? spl 2.01... stuck, and has verizon.
mine was originally stuck at the 3 -color boot screen... even after taking battery out and putting it back in and just powering on without holding camera-power keys... it goes into the boot screen only...
so i used mtty did set 16 0 and then "boot" and now when i restart the phone it goes right to the splash screen and gets stuck there saying dette's clean rom ... but "no radio" and just stays there.

Help on a MDA III

Hi, i'm trying to put a shady rom on my mda compact III, but i'm a new at this, I already downloaded the rom but now I dont now what to do, can anyone point me in the right direction or explain me step by step how it's done.
I hope someone can help me
I will assume you have an SDHC card and SD flashing is not an option
prepare for first flash:
- remove SD card and prefferably even SIM
- charge battery to at least 50%
- connect cable with ActiveSync (or WMDC), so that you can access files on your device
- make sure you use a reliable cable to prevent dropouts in midflash
get your ROM:
- download a ROM you want to try, if it's not official HTC, you NEED HardSPL before you continue
flashing HardSPL:
- find HardSPL ( get arteUSPL-nosize-cmon.zip somewhere around here, try google )
- HardSPL comes with no flashing program, you need to steal one from another ROM first!
- Unpack the ROM you chose in previous step and delete its .NBH file, place the RUU_Signed.nbh from HardSPL to the folder with blank flashing program
- make sure you are still synchronized and connected, you can alternatively switch to bootloader (hold rec until tricolor screen, press softreset)
- run the flashing process with CustomRUU.exe or similar (it has an icon)
flashing ROM:
- make sure the numbers on device start say SPL 1.11cmon otherwise try HardSPL bit again
- sync ActiveSync or use bootloader mode
- unpack the ROM you chose again OR just delete the HardSPL NBH file and place the original you deleted back
- run the EXE file and flash
- perform a hard-reset after the flash to prevent random problems (hold left+right softkey and press softreset)
-put your SIM and SD back
Have fun
I hope it's not too complex and I'm sure you can find better guides somewhere around here but this works. I think xD
Thanks...
You help me a lot.

Categories

Resources