My asus can't write to flash proces while upgrading
is show the following message,
BTLR 3.1
Start SD init
Get MBR success
can't find galaxymini-ond.raw!
can't find 850_GAX_SD.bin!
can't find FLASH.BIN!
can't find GSM.BIN!
can't find GSM.RAW!
can't find EXT_ROM.NBO!
valid packagercentage : 100
Read SD Busy !
Total 3 images in package
FLASH.BIN in package!
GSM.BIN in package!
EXT_ROM.NBO in package!
and can't proses write to flash
when i turn on device just shows post scren
BTLR 3.1 and no ROM message
Please Help......
thanks!
My Asus P320 can't boot too ...
I only finished with a boot blue screen during boot processing ..
Only see Asus logo and sologan, BLTR 3.1, ROM 4.15.0_1015_WWE_WWE and no more ...
I try to flash with P320_V4_15_0_V4_10_V1_11_0_WWE but i get Header_CRC_error ...
Please help me to solve it .My phone do not start Windows Mobile now ... Thank you ...
Even i am getting the same error. My writing % goes till 66% then again starts back writing...then later only boot screen but no next step....
can anybody have solution for same...waiting...
Yeah ...
I try many way and i get succeed...
First, i use ROM 4.10... to reflash... It may be good ... After, i upgrade my rom to the latest.. You can try it ... Good luck ...
please help to solve this "read sd busy".
my P320 cant boot, somebody can write the program for this P320 to using sd card format the nand flash of p320 before firmware flash in the rom of P320? thanks!
i need help with this too, i get stuck at
total 3 images in package
flash.bin in package!
gsm.bin in package!
ext_rom.nb0 in package!
Related
I was unlocking my AT&T SX56 and the rom upgrade just stoped and I could not do anything to mak eit start up again. Now The pocket PC has upgrading rom always on the screen and I can gt active sync to even see the pc to try and flash it or upgrade the rom again. If you have any info you think that might help would be great. Thank you for your help.
If you still can get to the bootloader screen (power + soft reset), you can cook a new ROM as nbf file and use the SD flashing method.
Cool man I can get to that screen and will give that a go
Ok got a SD card and put on a new rom how can I make it load the info from th card. Also everytime I try and make a nbf file type it erros on me.
./mkrom.sh: ../../kitchen.local/mkrom-inc.sh: No such file or directoryno files for configid 26220739write xip block starting at 81800000, with 3 fileswrite xip block starting at 81980000, with 0 filesheader : No such file or directoryError creating new rom
I picked nb1 said was for flashing with SD card and can't get it to load.
Hello everybody, actually I flashed my trinity with rom Ausdim WM6.1 V3 LIGHT , but i found a problem with this rom, in fact, in my device, i can not install or execute any other application, so i tried to flash an other rom (Mary SL 3.7) but in vain, i tried with SSPL-Trin but i coudn't execute it from my pda ( a problem of a security certificate or something like that) and when I push power+Camera+reset , i can access to the bootloader spl-1.07.0000 but when i try to flash , the operation stops at 2% and i receive an error : file corrupted. I tried with other cooked roms but i have always the same problem. An the last thing i've tried was trying to flash system from the minisd card, i formatted it to fat32 an i put the file TRINIMG.nbh but when i boot in bootoader it shows a message "loading..." then it shows a number "00068002", so could you please help me and thank you
=======Problem solved==========
Hi!
Can you please post how you solved the problem, to help other people that maybe have this situation in a future?
Thanks!
Actually i realized that i coudn't flash any other rom with the original SSPL, so i had the idea to try with the original htc wm5, and it worked.
you really need to flash hard-spl as well.. you're playing with fire
Hello,
I try to update my Excalibur with RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 rom, but the communication between my laptop and my phone got lost. Now I only can boot my phone in bootloader.
I try to load the same rom, and I download the original rom, but I obtain the following errors:
The file is corrupted
INVALID VENDER ID
Some one can help me please
run auto and follow instruction but if you flash your phone under windows vista or win7 Rom update process may be corrupted. I had same problem with win7 and vista , I can flash my rom under windowsxp now .
lenoxcr said:
Hello,
I try to update my Excalibur with RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 rom, but the communication between my laptop and my phone got lost. Now I only can boot my phone in bootloader.
I try to load the same rom, and I download the original rom, but I obtain the following errors:
The file is corrupted
INVALID VENDER ID
Some one can help me please
Click to expand...
Click to collapse
Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=540492 . Hope that helps
error 270
RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 is error 270
goer's d ignasia said:
RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 is error 270
Click to expand...
Click to collapse
Take your time to read the sticky & use the search.... It's a question that get asks so many times and answered so many too...
Hi everybody,
i have a serious problem with an asus fonepad 7 me371mg model (k004) , basically after trying to flash a custom rom i bricked the phone and now i don't know how to take it back to life , as it is stuck un the usb logo.. no recovery , no droidboot.
i need your help
if someone have the same phone please help me to rebuild it from scratch:crying:
i think the internal partition table is damaged so it needs to be rebuilt.
i have a copy of the stock rom downloaded from the asus website but it's a zip file containing a .Raw file, i would like to extract the boot.img droidboot.img splash.bin system.bin and so on... unfortunately i don't know how to extract those files from the raw file.
Any information will be welcome cause i really don't know where to start from.
the device can only be detected as medfield devices bot i don't have the necessary files to flash the phone with xfstk or similar programs.
Thanks to everybody wanna help me
any budy help me
if your k004 stay at "no usb cable connected!" here is the solution
search and download this file "ME371MG_all_TW_user_V3.2.3-2.raw"
put it into sd card and insert it to k004
turn your k004 off
push "volume+" and "power" together > show "ASUS logo" STILL PUSH> show "no usb cable connected!" > release both button
push "volume+" and "volume-" together > show "DROIDBOOT" > select "SD DOWNLOAD"
choice the file "ME371MG_all_TW_user_V3.2.3-2.raw" > pray
wait till it done~
good luck
brainbooster said:
hi everybody,
i have a serious problem with an asus fonepad 7 me371mg model (k004) , basically after trying to flash a custom rom i bricked the phone and now i don't know how to take it back to life , as it is stuck un the usb logo.. No recovery , no droidboot.
I need your help
if someone have the same phone please help me to rebuild it from scratch:crying:
I think the internal partition table is damaged so it needs to be rebuilt.
I have a copy of the stock rom downloaded from the asus website but it's a zip file containing a .raw file, i would like to extract the boot.img droidboot.img splash.bin system.bin and so on... Unfortunately i don't know how to extract those files from the raw file.
Any information will be welcome cause i really don't know where to start from.
The device can only be detected as medfield devices bot i don't have the necessary files to flash the phone with xfstk or similar programs.
Thanks to everybody wanna help me
Click to expand...
Click to collapse
i have the same trouble.
Need fw dnx ifwi os dnx os image files for asus k004 me371mg
Hardware brick too!
need dnx ifwi os dnx os image files for asus k004 me371mg
hi .. can you guys plz help me i have nova 2 plus and it is in bootloop after trying to root, can you guys plz help me flash the stock firmware , i cant find the stock firmware , my device model is BAC-L21, plz plz plz help
i really appreciate it
updated.. i found the firmware but i cant post the link but it is in a website called combinefile .com if u want to download it.
i downloaded the firmware and extracted the zip file till i got update.app but the update.app is over 4 GB in size and i cant copy it to my sdcard if FAT32 formatted, and when i reformatted the sdcard to NTFS and tried to force flash the firmware pressing VOLUME UP+DOWN+POWER KEY it says install system failed, so i dont know if it is because of the NTFS formatting which is not recognized by the phone or the phone is just dead totally.. i also extracted the Update.app file and flashed the boot.img , recovery.img and system.img but still the phone is not booting up.. can anyone answer or help plz
Try this firmware instead
https://drive.google.com/open?id=1tGuu5Y6Qfo5baHjEO_-tJ3irXAXIWa53