Please help ROM Update corrupted - HTC Excalibur

Hello,
I try to update my Excalibur with RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 rom, but the communication between my laptop and my phone got lost. Now I only can boot my phone in bootloader.
I try to load the same rom, and I download the original rom, but I obtain the following errors:
The file is corrupted
INVALID VENDER ID
Some one can help me please

run auto and follow instruction but if you flash your phone under windows vista or win7 Rom update process may be corrupted. I had same problem with win7 and vista , I can flash my rom under windowsxp now .

lenoxcr said:
Hello,
I try to update my Excalibur with RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 rom, but the communication between my laptop and my phone got lost. Now I only can boot my phone in bootloader.
I try to load the same rom, and I download the original rom, but I obtain the following errors:
The file is corrupted
INVALID VENDER ID
Some one can help me please
Click to expand...
Click to collapse
Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=540492 . Hope that helps

error 270
RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 is error 270

goer's d ignasia said:
RUU_EXCA_3VOLUTION_WM65_3VO.3.00.112509 is error 270
Click to expand...
Click to collapse
Take your time to read the sticky & use the search.... It's a question that get asks so many times and answered so many too...

Related

Downgrading wallaby

hello there
i got an Qtek 1010 locked ..
that i wanted to flash using SD card ... i failed using XDAtools as a message poped up saying that the nbf file size is larger than required (32mb)
. i tried down grading using :
'pnewbootloader bootloader_v5_15.nb0'
but the following message appeared
"Unable to find flash info offset, cannot disable bootloader writeprotect"
wHAT SHOULD I DO .... PLEASE :roll:
any help would be appreciated
many thanks
letoubib said:
that i wanted to flash using SD card ... i failed using XDAtools as a message poped up saying that the nbf file size is larger than required (32mb)
Click to expand...
Click to collapse
If you're trying to flash WM2003SE, than it's impossible to flash via SD....
If you're trying to flash any other ROM, than the ROM-File is corrupt......
letoubib said:
'pnewbootloader bootloader_v5_15.nb0'
but the following message appeared
"Unable to find flash info offset, cannot disable bootloader writeprotect"
Click to expand...
Click to collapse
downgrading bootloader does not change anything at the XDATools error message....
You can try flashing via SD card without downgrading bootloader. This is not required for all cases.
Stefan
i did it
thank you so much Stefan
... i succeded ....... you r GREAT for your outstanding website ...

Problem after flashing Trinity with rom Ausdim WM6.1 V3

Hello everybody, actually I flashed my trinity with rom Ausdim WM6.1 V3 LIGHT , but i found a problem with this rom, in fact, in my device, i can not install or execute any other application, so i tried to flash an other rom (Mary SL 3.7) but in vain, i tried with SSPL-Trin but i coudn't execute it from my pda ( a problem of a security certificate or something like that) and when I push power+Camera+reset , i can access to the bootloader spl-1.07.0000 but when i try to flash , the operation stops at 2% and i receive an error : file corrupted. I tried with other cooked roms but i have always the same problem. An the last thing i've tried was trying to flash system from the minisd card, i formatted it to fat32 an i put the file TRINIMG.nbh but when i boot in bootoader it shows a message "loading..." then it shows a number "00068002", so could you please help me and thank you
=======Problem solved==========
Hi!
Can you please post how you solved the problem, to help other people that maybe have this situation in a future?
Thanks!
Actually i realized that i coudn't flash any other rom with the original SSPL, so i had the idea to try with the original htc wm5, and it worked.
you really need to flash hard-spl as well.. you're playing with fire

[ROM][WWE]HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.2 6_1.09.25.23

Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe
What changes had been made in version 2.03?
Is it safe enough to use
can i ask u were u getting all these from ?
tabarda said:
Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe
Click to expand...
Click to collapse
Hey Tuga Men.
Did you test it?
pacharru said:
Hey Tuga Men.
Did you test it?
Click to expand...
Click to collapse
Hi friend,
No, install the English version 2:03
http://forum.xda-developers.com/showthread.php?t=471699
tabarda said:
Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe
Click to expand...
Click to collapse
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?
misa_reg said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?
Click to expand...
Click to collapse
the same to me
misa_reg said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?
Click to expand...
Click to collapse
You already have it.
There is a problem installing these ROMs via an Activesync connection. You need to flash from Internal Storage. Also, make sure you have HardSPL installed before you flash.
Instructions for flashing from internal storage:
Extract the RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Dia mond_52.51.25.26_1.09.25.23_Ship.exe file to a new directory on your PC
Find the RUU_signed.nbh file in this new directory and rename it to Diamimg.nbh
Copy Diamimg.nbh to the root of Internal Storage
Hold in the volume down button + the back button (thats the top right button on the front to the right of the big middle jog control) + soft reset
Follow instructions on screen
When the process is complete (it will say UPDATE SUCCESS) then reset
Thank You! Great! Updated succesfull, but this is new update method for me!
What is the differend betwen 2.03.401.2 and 2.03.456.2 ?
Any other mirrors available?
misa_reg said:
Thank You! Great! Updated succesfull, but this is new update method for me!
What is the differend betwen 2.03.401.2 and 2.03.456.2 ?
Click to expand...
Click to collapse
Yes, same question. I already installed "RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship". what is the different? thank you.
pdaman said:
Yes, same question. I already installed "RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship". what is the different? thank you.
Click to expand...
Click to collapse
Only the numbers are different and xt9, propebly support ME language, nothing else
Megaupload
http://www.megaupload.com/?d=WTS8UQKB
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.40 Olinex SPL i carnt sync with computer and carnt get out of try colour screen so i dont think i can update from phone ive tryed to flash a cooked rom still get same message please help what should i do thanks
Same here, do have HARD-SPL on it, tried several times. But now I cannot seem to soft or hard-reset....so cannot try to install it from the interal storage as well....is it bricked now?
buff said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.40 Olinex SPL i carnt sync with computer and carnt get out of try colour screen so i dont think i can update from phone ive tryed to flash a cooked rom still get same message please help what should i do thanks
Click to expand...
Click to collapse
Flash with HardSPL 1.34,and hard reset.
sorry but keep trying but all i get is file error 240 file open have you got any ideas on what or how to do it thanks
hello!
can someone tell me how to extract the .nbh file from the exe file, or even upload it somewhere. i'm not able to flash this rom to my diamond(same error with corrupted file). i have hspl 1,93.
tzacanel said:
hello!
can someone tell me how to extract the .nbh file from the exe file, or even upload it somewhere. i'm not able to flash this rom to my diamond(same error with corrupted file). i have hspl 1,93.
Click to expand...
Click to collapse
Uuse winRAR to open the exe file and extract the contents to a folder which will contain NBH file

[Error 226] My phone is brick ?

Hello,
After a flash of GenY 1.1 by MTTY (and internal storage) the flash stop at 71% with a 226 error.
Now I can't flash HardSPL (flash goes to 100% but the version of my HSPL in bootloader still the same !). I can't flash on official rom (stop at 61% with same error code).
Anyone now if it's possible to do something for that ?
Thanks
PS : sorry for my english !
I can never change my hardspl without using the jumpspl technique as in link below for hardspl 1.24
http://forum.xda-developers.com/showthread.php?t=408621
It always stays the same despite reaching 100%
HTH
Bixx
Try:
http://forum.xda-developers.com/showpost.php?p=1518700&postcount=11
Hi !
I've tried to flash HSPL 1.24 but like my phone doesn't boot, I can't copy and execute JumpSPL.exe and the RomUpdateUtility can't flash the HSPL.
JR_de > i's for the trinity, the 1.20 Olipro it's not for diamond, and I'm no SuperCID.
I've tried with 1.40 Olinex Unsigned with mtty command in your link but still the same error when I flash an official rom (2.03.406....)
thanks for your answers
try to change the usb port from pc and still try yr phone is not brick
I try with another usb port, and another computer, the results it's the same !
tom62 said:
I try with another usb port, and another computer, the results it's the same !
Click to expand...
Click to collapse
ever tried to change the usb cable?
Yes I try to flash with a second usb cable....
I believe there is no solution !
OS?
On what OS are you trying this?
Windows XP / Vista / 7 32bit? 64Bit?
Try this: http://forum.xda-developers.com/showthread.php?t=578231
is there a bootble ROM on it?
if so , download a stock image from HTC and copy to top level of your 4GB
reset and press the enter and back buttons
follow on screen instructions
i recomend that you flash like this, much safer
good luck
hello, happy new year everybody !!
there is no bootble ROM on my diamond.
I have no access to the internal storage, I can't copy a nbh file on it.
I try to flash an hspl with change .nbh after click on the first "next" in the customRuu, but the version of the hspl always doesn't change, and error 260 when I flash an OS rom...
nobody has a solution ?!
Try and flash back to stock SPL, check my sig
after that, try and flash stock OS
if either fail, send to HTC
Good Luck
Badwolve1

Bricked .. Help me !

Hello, i have bricked my phone after an hurupdate, i dont know why but the phone have suddenly turn off during twrp hurupdater process and now i can't turn on the phone, i can plug in my pc & he recognize him as "fastboot devices" but when i try to flash something or unbrick via multi tool nothing happen (FAILED (remote: Command not allowed))
I can't do anything now.. Please help me !
Albanheraibi said:
Hello, i have bricked my phone after an hurupdate, i dont know why but the phone have suddenly turn off during twrp hurupdater process and now i can't turn on the phone, i can plug in my pc & he recognize him as "fastboot devices" but when i try to flash something or unbrick via multi tool nothing happen (FAILED (remote: Command not allowed))
I can't do anything now.. Please help me !
Click to expand...
Click to collapse
Erecovery has started working for some people. you can try that
mrmazak said:
Erecovery has started working for some people. you can try that
Click to expand...
Click to collapse
Nope .. nothing work ..
Anyone know how to unbrick ? ..
I think i have flashed the wrong update, i have bndl21 & i have flashed the bndl22 or bndal10, my phone is dead ?
Albanheraibi said:
I think i have flashed the wrong update, i have bndl21 & i have flashed the bndl22 or bndal10, my phone is dead ?
Click to expand...
Click to collapse
Shouldn't be, at least not from that, not completely.
Was this the first condition, or an added problem?
I think best thing to try is the service ROM.
This one is BND-L21C432..
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.. If this is not the correct version for your honor 7x
Now with dc phoenix i have restore the fastboot and the erecovery, i can flash all i want but nothing happens, just boot loop at "your phone is not trusted" screen.
I was on catuva's rom before brick and now i have the catuva splashboot screen even after full firmware retore by dc phoenix.
When i try to flash in twrp i see lot of errors related to partition table (invalid argument cust, odm, sytsem etc) it seems the partition table have a problem..
The DLOAD can restore this ?
When i try to restore via dload it stuck at 5% and it says "software install failed!" ..
Someone Help me ?..
Albanheraibi said:
When i try to restore via dload it stuck at 5% and it says "software install failed!" ..
Someone Help me ?..
Click to expand...
Click to collapse
You got failed using the "service-rom" dload?
This one is Oreo I believe. There is a nougat one also.
mrmazak said:
You got failed using the "service-rom" dload?
This one is Oreo I believe. There is a nougat one also.
Click to expand...
Click to collapse
Yes stuck at 5%..
i have try to flash the Honor 7X-Elemental V1(8.X-GPU) and i get an error at the end of process >
mount: failed to mount
/dev/block/platform/hi_mci.0/by-name/system at /system: invalid argument
What i am supposed to do with this error ?
Albanheraibi said:
Yes stuck at 5%..
i have try to flash the Honor 7X-Elemental V1(8.X-GPU) and i get an error at the end of process >
mount: failed to mount
/dev/block/platform/hi_mci.0/by-name/system at /system: invalid argument
What i am supposed to do with this error ?
Click to expand...
Click to collapse
Says in the install guide for it, you must be running at newest security patch in order to install elemental.
Please focus on one thing. Getting phone to boot full stock first before trying other rom. You are going to hard brck your phon if you keep doing flashes when the stock fails to install
mrmazak said:
Says in the install guide for it, you must be running at newest security patch in order to install elemental.
Please focus on one thing. Getting phone to boot full stock first before trying other rom. You are going to hard brck your phon if you keep doing flashes when the stock fails to install
Click to expand...
Click to collapse
When i try to rollback emui5 via twrp with your guide i have this error :
write radio image...
check_write_data_to_partition,write data error update_huawei_pkg_from_ota_zip: update pakage from zip failed
E : unknown command [errno]
Updater process ended with ERROR : 9
Error installing zip file '/external_sd/HWOTA8/update.zip'
i remember that the phone has started to bootloop just after twrp flashed the wrong radio file..
This is the end ?
Albanheraibi said:
When i try to rollback emui5 via twrp with your guide i have this error :
write radio image...
check_write_data_to_partition,write data error update_huawei_pkg_from_ota_zip: update pakage from zip failed
E : unknown command [errno]
Updater process ended with ERROR : 9
Error installing zip file '/external_sd/HWOTA8/update.zip'
i remember that the phone has started to bootloop just after twrp flashed the wrong radio file..
This is the end ?
Click to expand...
Click to collapse
I am not understanding how you say you follow my guide, then post the error.
This error shows you are trying to install ota update with TWRP.
My guide sets you to install ota update file with a modified stock recovery (no-check).
If you are having trouble because of bad translation, please do not assume what you need to do and wait for proper help and translation
mrmazak said:
I am not understanding how you say you follow my guide, then post the error.
This error shows you are trying to install ota update with TWRP.
My guide sets you to install ota update file with a modified stock recovery (no-check).
If you are having trouble because of bad translation, please do not assume what you need to do and wait for proper help and translation
Click to expand...
Click to collapse
Ok after update with hurupdater via twrp (he flashed the correct radio.img file) the phone have income from death !
Thank you for trying to help me !

Categories

Resources