Develop Bugs

Need help with qfil. Urgent!! Please help

HI,
so my device is stuck in recovery boot so even when i install a ROM it keeps going to recovery again. i was suggested to use QFIL. so i did followed all the instrcutions downloaded all necessary files and port 9008 is also showing up. the problem is when i press download i get the same error. ive tried restarting the program computer and even got test mode on.
Process Index:0
Programmer Path:C:\Users\Family\Desktop\zuk\prog_emmc_firehose_8996_ddr.elf
Image Search Path:C:\Users\Family\Desktop\zuk
Please select the XML file
Start Download
Program Path:C:\Users\Family\Desktop\zuk\prog_emmc_firehose_8996_ddr.elf
COM Port number:9
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
PLEASE SOMEONE HELP ME THIS IS MY ONLY PHONE AND I JUST GOT IT A MONTH AGO

Please someone help
Please can someone help me im dying here

cosmicaero said:
Please can someone help me im dying here
Click to expand...
Click to collapse
Some guys had this error because the drivers wasnt installed properly. Try to install the drivers again.
Also, have you unlocked the bootloader? Try that also. That can also fix the issue.

Gerriitw said:
Some guys had this error because the drivers wasnt installed properly. Try to install the drivers again.
Also, have you unlocked the bootloader? Try that also. That can also fix the issue.
Click to expand...
Click to collapse
I've installed the ZUK_UsbDriver_1.0.5 drivers onto my PC. my bootloader was already unlocked. I rooted my phone and installed TWRP and a custom ROM. I went to factory reset my phone and now i only have the TWRP recovery left. When i go to install the new ROM zip from TWRP it installs without any errors but when it goes to boot the system it booting into TWRP.

cosmicaero said:
I've installed the ZUK_UsbDriver_1.0.5 drivers onto my PC. my bootloader was already unlocked. I rooted my phone and installed TWRP and a custom ROM. I went to factory reset my phone and now i only have the TWRP recovery left. When i go to install the new ROM zip from TWRP it installs without any errors but when it goes to boot the system it booting into TWRP.
Click to expand...
Click to collapse
Have you mount everything in the recovery? Check if everything is checked in the mount setting in twrp

Gerriitw said:
Have you mount everything in the recovery? Check if everything is checked in the mount setting in twrp
Click to expand...
Click to collapse
Can you please tell me how to do that please?

cosmicaero said:
Can you please tell me how to do that please?
Click to expand...
Click to collapse
Look at the screenies i made for you ^^

Gerriitw said:
Look at the screenies i made for you ^^
Click to expand...
Click to collapse
thank you after i've clicked them should i try to install the ROM?

cosmicaero said:
thank you after i've clicked them should i try to install the ROM?
Click to expand...
Click to collapse
If the rom is properly installed, just try to reboot agian.

Gerriitw said:
If the rom is properly installed, just try to reboot agian.
Click to expand...
Click to collapse
when i click on them and tick them and reboot the system then i reboot to system it goes back to TWRP. i look on mount again and the ones that i checked became unchecked with only 'Data' and 'Cache' the only ones stayed checked

cosmicaero said:
when i click on them and tick them and reboot the system then i reboot to system it goes back to TWRP. i look on mount again and the ones that i checked became unchecked with only 'Data' and 'Cache' the only ones stayed checked
Click to expand...
Click to collapse
Try read mount system partition only

Gerriitw said:
Try read mount system partition only
Click to expand...
Click to collapse
no that didnt work but it stays ticked

Solve Sahara Fail QFIL
cosmicaero said:
HI,
so my device is stuck in recovery boot so even when i install a ROM it keeps going to recovery again. i was suggested to use QFIL. so i did followed all the instrcutions downloaded all necessary files and port 9008 is also showing up. the problem is when i press download i get the same error. ive tried restarting the program computer and even got test mode on.
Process Index:0
Programmer Path:C:\Users\Family\Desktop\zuk\prog_emmc_firehose_8996_ddr.elf
Image Search Path:C:\Users\Family\Desktop\zuk
Please select the XML file
Start Download
Program Path:C:\Users\Family\Desktop\zuk\prog_emmc_firehose_8996_ddr.elf
COM Port number:9
Sahara Connecting ...
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
PLEASE SOMEONE HELP ME THIS IS MY ONLY PHONE AND I JUST GOT IT A MONTH AGO
Click to expand...
Click to collapse
Here are a few checks that you should do to get rid of problem:
1. check for z2 plus drivers
2. check for qualcomm diag drivers
3. place the firmware folder so that path is short ('C:/firm')
4. Restart system
4. launch qfil, select relevant files as mentioned in tutorial, get into qualcomm port mode (either through shut down phone+vol up key OR adb reboot edl). As soon as you see port in qfil hit download.

cosmicaero said:
I've installed the ZUK_UsbDriver_1.0.5 drivers onto my PC. my bootloader was already unlocked. I rooted my phone and installed TWRP and a custom ROM. I went to factory reset my phone and now i only have the TWRP recovery left. When i go to install the new ROM zip from TWRP it installs without any errors but when it goes to boot the system it booting into TWRP.
Click to expand...
Click to collapse
My phone also got stuck in a TWRP bootloop and I solved it with this solution:
Go to TWRP recovery terminal commands, and enter the following:
dd if=/dev/zero of=/dev/block/platform/soc/7464900.sdhci/by-name/misc

Thread close or however you close the thread. Thanks for the results a whole month after

Thank You !!
veethree said:
My phone also got stuck in a TWRP bootloop and I solved it with this solution:
Go to TWRP recovery terminal commands, and enter the following:
dd if=/dev/zero of=/dev/block/platform/soc/7464900.sdhci/by-name/misc
Click to expand...
Click to collapse
thank you,it worked !
i was so panicked this happend and nothing worked and my phone device is like 2 days old lol

noobaj said:
thank you,it worked !
i was so panicked this happend and nothing worked and my phone device is like 2 days old lol
Click to expand...
Click to collapse
Great thanks Bro . you saved my day...

veethree said:
My phone also got stuck in a TWRP bootloop and I solved it with this solution:
Go to TWRP recovery terminal commands, and enter the following:
dd if=/dev/zero of=/dev/block/platform/soc/7464900.sdhci/by-name/misc
Click to expand...
Click to collapse
You saved my day brother..
I was at it for 6 7 hours straight until i found this thread.
Thank you.

cosmicaero said:
Can you please tell me how to do that please?
Click to expand...
Click to collapse
I just flashed ROM, clicked reboot,,then reboot bootloader...then clicked start or even started factory mode. Boots right up
---------- Post added at 02:25 AM ---------- Previous post was at 01:56 AM ----------
snehgada said:
You saved my day brother..
I was at it for 6 7 hours straight until i found this thread.
Thank you.
Click to expand...
Click to collapse
Is this all in one line?

I tried to unlock bootloader and install custom rom but the when I tried to install pixel rom in twrp mode it shows errors many time so I disconnected cable and after that I tried to connect with cable it doesn't connect do I locked the bootloader through adb fastboot loader and now my phone is not turning off or on only screen show zuk and powerd by Android.
Pls help me what to do now.

Could somebody help me?downgrade emui5

:crying:Last night, I installed the Android 8 update package on the forum.
Halfway through, an error is displayed and then exit.
I tried eRecovery and Hisuite, but all failed.
I tried it and found that the original recovery partition became recovery_ramdisk. It looks like the partition has changed.
What can I do to be able to return to emui5?
I have imagined "fastboot flashall", but I do not know how? Forgive my lame English

zzkeier said:
:crying:Last night, I installed the Android 8 update package on the forum.
Halfway through, an error is displayed and then exit.
I tried eRecovery and Hisuite, but all failed.
I tried it and found that the original recovery partition became recovery_ramdisk. It looks like the partition has changed.
What can I do to be able to return to emui5?
I have imagined "fastboot flashall", but I do not know how? Forgive my lame English
Click to expand...
Click to collapse
recovery_ramdisk. is the new name of recovery partition. EMUI8/Oreo flashing has started means the partitions etc have changed already so right now you can't go back to EMUI 5 as rollback images are not available yet. You can try to flash again properly with proper download for your specific model. I guess you are missing some echo commands.

thank you very much
SVR said:
recovery_ramdisk. is the new name of recovery partition. EMUI8/Oreo flashing has started means the partitions etc have changed already so right now you can't go back to EMUI 5 as rollback images are not available yet. You can try to flash again properly with proper download for your specific model. I guess you are missing some echo commands.
Click to expand...
Click to collapse
I extract the update.app(oreo) file and then i flash the system.img. Now it works..Thank you

hey how did you did that?
zzkeier said:
I extract the update.app(oreo) file and then i flash the system.img. Now it works..Thank you
Click to expand...
Click to collapse
I also have similar problem I installed different model rom using firmware finder and now I can only use my phone when I unlock bootloader when I lock it it will not open directly go into the erecovery and nothing is working I tried everything twrp,erecovery,force updating nothing worked all failed.please help

shrey2204 said:
I also have similar problem I installed different model rom using firmware finder and now I can only use my phone when I unlock bootloader when I lock it it will not open directly go into the erecovery and nothing is working I tried everything twrp,erecovery,force updating nothing worked all failed.please help
Click to expand...
Click to collapse
well,I flash the system.img by fastboot,and then make a factory reset.Bootloader unlock needed.

i have the same problem
I tried to upgrade phone to Oreo after unlock, in update progress it got error and restart phone! Now it shows:
Code:
Error Mode
Attention!
Please update system again
Error!
Func No : 11 (recovery image)
Error No : 2 ( load failed )
I just have access to fastboot
i did flash system.img and tried install twrp on ramdisk recovery. but always same
:crying::crying::crying::crying:

Bricked my phone, please help

I upgraded my phone to android EMUI8 and tried to install the RR 8.1 ROM but my device wouldn't boot up. Then I tried to reflash the stock system.img but it won't let me. I don't have TWRP on my phone but I can acces fastboot. Does anyone know what to do? Thanks in advance :^l

jetzecazemier said:
I upgraded my phone to android EMUI8 and tried to install the RR 8.1 ROM but my device wouldn't boot up. Then I tried to reflash the stock system.img but it won't let me. I don't have TWRP on my phone but I can acces fastboot. Does anyone know what to do? Thanks in advance :^l
Click to expand...
Click to collapse
What is it you mean , it won't let you. Does it give a message. Failed?
Are you at frp locked?

mrmazak said:
What is it you mean , it won't let you. Does it give a message. Failed?
Are you at frp locked?
Click to expand...
Click to collapse
Well when I try to flash the stock 8.0 system.img it gives me a "Invalid sparse file format at header magi" and when I try to flash TWRP it gives me a "FAILED (remote: partition length get error) I am frp unlocked by the way.

jetzecazemier said:
Well when I try to flash the stock 8.0 system.img it gives me a "Invalid sparse file format at header magi" and when I try to flash TWRP it gives me a "FAILED (remote: partition length get error)
Click to expand...
Click to collapse
Ok, that does not seem too bad, yet.
I suppose you are using system.img downloaded from web.
That image has given many that same error.
Best to use your system.img.
And the error flashing twrp, is common when using the nougat command or nougat recovery on Oreo.
Solutions.
Find your firmware on pro-teammt
http://pro-teammt.ru/firmware-database/?firmware_model=Bnd-&firmware_page=0
Then download update.zip
Extract files.
Get hauwei update extractor.
https://www.google.com/url?sa=t&sou...FjAAegQIARAB&usg=AOvVaw0xkKEyI85nY9x4Fjr1AWJl
Extract the system.img
Then fastboot flash it.
Recovery:
Oreo command== fastboot flash recovery_ramdisk twrp_ramdisk
Twrp name depends on version used. I use build 4 from here
https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447

mrmazak said:
Ok, that does not seem too bad, yet.
I suppose you are using system.img downloaded from web.
That image has given many that same error.
Best to use your system.img.
And the error flashing twrp, is common when using the nougat command or nougat recovery on Oreo.
Solutions.
Find your firmware on pro-teammt
http://pro-teammt.ru/firmware-database/?firmware_model=Bnd-&firmware_page=0
Then download update.zip
Extract files.
Get hauwei update extractor.
https://www.google.com/url?sa=t&sou...FjAAegQIARAB&usg=AOvVaw0xkKEyI85nY9x4Fjr1AWJl
Extract the system.img
Then fastboot flash it.
Recovery:
Oreo command== fastboot flash recovery_ramdisk twrp_ramdisk
Twrp name depends on version used. I use build 4 from here
https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447
Click to expand...
Click to collapse
Okay so I've downloaded the latest firmware for my model but when I try to extract the update.app inside of the update.zip file the huawei zip extractor gives me "RECOVERY_RAMDIS.img: Invalid header crc - Expected: 15200 Got: 44917

jetzecazemier said:
Okay so I've downloaded the latest firmware for my model but when I try to extract the update.app inside of the update.zip file the huawei zip extractor gives me "RECOVERY_RAMDIS.img: Invalid header crc - Expected: 15200 Got: 44917
Click to expand...
Click to collapse
yes there is a bug either in the extractor or the update files. they all do it. Go to the settings tab and take check mark off verify header.

mrmazak said:
yes there is a bug either in the extractor or the update files. they all do it. Go to the settings tab and take check mark off verify header.
Click to expand...
Click to collapse
I flashed the system.img but now the phone bootloops. It could be possible I got the wrong system.img because I don't know exactly what firmware my phone was on before I messed up. I only know it was EMUI8. Is there a way to completely reflash everything?

jetzecazemier said:
I flashed the system.img but now the phone bootloops. It could be possible I got the wrong system.img because I don't know exactly what firmware my phone was on before I messed up. I only know it was EMUI8. Is there a way to completely reflash everything?
Click to expand...
Click to collapse
Yes. I have guide thread here for that.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
But also wipe in factory reset from stock recovery may solve the bootloop.

mrmazak said:
Yes. I have guide thread here for that.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
But also wipe in factory reset from stock recovery may solve the bootloop.
Click to expand...
Click to collapse
Alright, I'll try that before I have a look at that thread

mrmazak said:
Yes. I have guide thread here for that.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
But also wipe in factory reset from stock recovery may solve the bootloop.
Click to expand...
Click to collapse
I tried rebooting to stock recovery in order to factory reset but it only shows me the update, power off and reboot options so no factory reset possibility. I read through the entire thread you linked here but I'm very confused as to what to do with the full OTA file. I'm on a broken EMUI8 that bootloops and I'd like to clean flash EMUI8 again so I can flash an AOSP Oreo rom after that. What do I do?

jetzecazemier said:
I tried rebooting to stock recovery in order to factory reset but it only shows me the update, power off and reboot options so no factory reset possibility. I read through the entire thread you linked here but I'm very confused as to what to do with the full OTA file. I'm on a broken EMUI8 that bootloops and I'd like to clean flash EMUI8 again so I can flash an AOSP Oreo rom after that. What do I do?
Click to expand...
Click to collapse
Just made updates to guide last night. I think it is worded simple now.
Download my update "package" from step E
Extract it to a folder on your PC.
You are on emui8, so copy the HWOTA folder from the extracted zip to your sdcard
Also put hwota-update-7-8-auto.zip on sdcard.
Put the three (3) update files from pro-teammt.ru in the HWOTA8 folder on your sdcard
Put card into phone
Boot into twrp
Select install
Choose sdcard as source
Install hwota-update-7-8-auto.zip

mrmazak said:
Just made updates to guide last night. I think it is worded simple now.
Download my update "package" from step E
Extract it to a folder on your PC.
You are on emui8, so copy the HWOTA folder from the extracted zip to your sdcard
Also put hwota-update-7-8-auto.zip on sdcard.
Put the three (3) update files from pro-teammt.ru in the HWOTA8 folder on your sdcard
Put card into phone
Boot into twrp
Select install
Choose sdcard as source
Install hwota-update-7-8-auto.zip
Click to expand...
Click to collapse
So far so good but the FULLOTA update file I got from that website only has one file (update.zip) Do I need to extract that? And if so, what 3 files do I put on my sdcard?

jetzecazemier said:
So far so good but the FULLOTA update file I got from that website only has one file (update.zip) Do I need to extract that? And if so, what 3 files do I put on my sdcard?
Click to expand...
Click to collapse
No do not extract it.
On that site, next to link for update file, is "file list"
Click this. It gives links for all three files.
Put those three zip files into hwota folder

mrmazak said:
No do not extract it.
On that site, next to link for update file, is "file list"
Click this. It gives links for all three files.
Put those three zip files into hwota folder
Click to expand...
Click to collapse
Alright, I got it! Now I need to flash TWRP but the executable to install TWRP says my adb drivers are outdated. I have the minimal fastboot and adb installation from XDA.

jetzecazemier said:
Alright, I got it! Now I need to flash TWRP but the executable to install TWRP says my adb drivers are outdated. I have the minimal fastboot and adb installation from XDA.
Click to expand...
Click to collapse
That should be fine.
Usually means you have other adb also , probably from other tool.
If you have twrp , not need to use the terp recovery installer

mrmazak said:
That should be fine.
Usually means you have other adb also , probably from other tool.
If you have twrp , not need to use the terp recovery installer
Click to expand...
Click to collapse
Well the problem is I don't have TWRP and none of the versions i've tried to install work. The installer doesn't work either, it says closing adb daemon and stays on that.

jetzecazemier said:
Well the problem is I don't have TWRP and none of the versions i've tried to install work. The installer doesn't work either, it says closing adb daemon and stays on that.
Click to expand...
Click to collapse
Each step of the tool I put pause.
So it stopped on command and not closed.
Press spacebar

mrmazak said:
Each step of the tool I put pause.
So it stopped on command and not closed.
Press spacebar
Click to expand...
Click to collapse
Dude, you're the man! I got my device up and running again. I'll probably stay on EMUI8 since it's more stable than the current AOSP rom. I wanna root it tho so can I just use the lazy recovery tool to install twrp and simply install magisk?

jetzecazemier said:
Dude, you're the man! I got my device up and running again. I'll probably stay on EMUI8 since it's more stable than the current AOSP rom. I wanna root it tho so can I just use the lazy recovery tool to install twrp and simply install magisk?
Click to expand...
Click to collapse
Yes.
The lazy tool has recovery with encryption working

I got it working on EMUI8 but I decided to flash the aosp rom cuz i prefer stock android. Can't seem to get twrp to install tho. I keep getting "1 was unexpected at this time"

ERROR MODE Attention! Please update system again.

Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!

Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Click to expand...
Click to collapse
Doing the update second time is fine, and best way to restore full stock. But you needed to use Oreo version of no-check recovery and the Oreo partition to flash it to.
So if still able to get into twrp, can try with correct no-check recovery and correct partition it's flashed to.
Also
With multi tool , make sure you put check mark on emui 8. Up in upper right corner. That way it uses Oreo partition names and file not nougat.
The partition length over message usually means nougat file or partition name used on Oreo system

mrmazak said:
Doing the update second time is fine, and best way to restore full stock. But you needed to use Oreo version of no-check recovery and the Oreo partition to flash it to.
So if still able to get into twrp, can try with correct no-check recovery and correct partition it's flashed to.
Also
With multi tool , make sure you put check mark on emui 8. Up in upper right corner. That way it uses Oreo partition names and file not nougat.
The partition length over message usually means nougat file or partition name used on Oreo system
Click to expand...
Click to collapse
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore

Mohammadreza76646 said:
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Click to expand...
Click to collapse
I give my phone to a friend to work on it. If he can't fix it I try new multi tools version to flash phone.

Mohammadreza76646 said:
Thank you for your answer.
But I try to extract update.app (oreo version) but its failed! huawei update extractor cant open it and 7zip cant extract it with (unexpected error...)!
And unfortunately my TWRP dos not work anymore
Click to expand...
Click to collapse
On the extractor app. On options tab uncheck the verify header option, it should extract then.
Then perhaps first do these three partitions.
Kernel.img
Ramdisk.img
Then
twrp_ramdisk or for stock use recovery_ramdisk

Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!!
Click to expand...
Click to collapse
I ever have similiar problem with you dude, but it's solved now, if you always stuck on " its OK but when my phone want to start its stuck on google page "just a sec...", its call google accont verification, i'll by bypass with this script, save as to .bat and put on adb folder
adb devices
adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
adb shell am start -n com.google.android.gsf.login/
adb shell am start -n com.google.android.gsf.login.LoginActivity
pause
in fastboot type:
fastboot -w
after all it's works to me to bypass google account verification
and if now your problem is
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
i solve with re-flash system from this
https://androidfilehost.com/?fid=673956719939830152
fastboot flash system system.img
and doing TWRP Flashing
https://forum.xda-developers.com/devdb/project/?id=25826#downloads
fastboot flash recovery_ramdisk complete_twrp_ramdisk.img
and voila my problem solved..

mrmazak said:
On the extractor app. On options tab uncheck the verify header option, it should extract then.
Then perhaps first do these three partitions.
Kernel.img
Ramdisk.img
Then
twrp_ramdisk or for stock use recovery_ramdisk
Click to expand...
Click to collapse
Hello again dude.
Finally I flashed my phone and I got the system installed.
But now my phones IMEI is lost. and I cant put sim on it!!!
what should I do now???
FRP is locked! (

Mohammadreza76646 said:
Hello again dude.
Finally I flashed my phone and I got the system installed.
But now my phones IMEI is lost. and I cant put sim on it!!!
what should I do now???
FRP is locked! (
Click to expand...
Click to collapse
So now is locked frp. Does phone have twrp or stock now.?
I think when you tried to install the oreo update for second time, you followed same tutorial as the first time. And that made you problem worse. The tutorial has you flash no-check recovery to 2 partition by block number. 22 & 29. On nougat that is "recovery" and "recovery2". On Oreo partion table it is "reserved2" & "erecovery_vendor"
I don't know how to fix imei. Have hope that if to ucan have a full ota install , maybe can be fixed.
There is available a "service rom" (used to fix most all problem) for Europe region with l21.
I can share link to site with service rom if you want , but I have not used it myself so not gonna be much help with it.
Link is to rusian language page. Google should translate for you.
https://4pda.ru/forum/index.php?showtopic=879524&view=findpost&p=73818595

mrmazak said:
So now is locked frp. Does phone have twrp or stock now.?
I think when you tried to install the oreo update for second time, you followed same tutorial as the first time. And that made you problem worse. The tutorial has you flash no-check recovery to 2 partition by block number. 22 & 29. On nougat that is "recovery" and "recovery2". On Oreo partion table it is "reserved2" & "erecovery_vendor"
I don't know how to fix imei. Have hope that if to ucan have a full ota install , maybe can be fixed.
There is available a "service rom" (used to fix most all problem) for Europe region with l21.
I can share link to site with service rom if you want , but I have not used it myself so not gonna be much help with it.
Link is to rusian language page. Google should translate for you.
https://4pda.ru/forum/index.php?showtopic=879524&view=findpost&p=73818595
Click to expand...
Click to collapse
It have stock recovery.

Mohammadreza76646 said:
It have stock recovery.
Click to expand...
Click to collapse
in summery. because i have been going back and forth in multiple different groups, multiple problem, i cant remember it all.
you have broken system, from failed root attempt, followed by failed update.
device condition is as follows.
--system not booting
--stock recovery loads
--fastboot/bootloader loads, but is in frp lock status
options are limited, at best.
I think "dload" method with service rom is best.
other option is maybe paid service like dc-unlock. But I can recall some note on there service about frp-unlock, that can only be used on device with working system. (of course if was working system, wouldn't need dc-unlock)

mrmazak said:
in summery. because i have been going back and forth in multiple different groups, multiple problem, i cant remember it all.
you have broken system, from failed root attempt, followed by failed update.
device condition is as follows.
--system not booting
--stock recovery loads
--fastboot/bootloader loads, but is in frp lock status
options are limited, at best.
I think "dload" method with service rom is best.
other option is maybe paid service like dc-unlock. But I can recall some note on there service about frp-unlock, that can only be used on device with working system. (of course if was working system, wouldn't need dc-unlock)
Click to expand...
Click to collapse
No. System boot successfully!
I will send you screenshot:

Mohammadreza76646 said:
No. System boot successfully!
I will send you screenshot:
Click to expand...
Click to collapse
here you are

Mohammadreza76646 said:
here you are
Click to expand...
Click to collapse
what about the "about phone" screen
what does it show for version?
If is all stock you should be able to go into deveolper options and enable "oem unlock". If it is greyed out and cannot switch it. Try First to remove google account (all accounts ). and reboot. See if can change then. If not, try Second to do "fastboot oem relock [enter your bootloader code here]
after relock and rebooted oem switch should be enabled again.
****RELOCK IS ONLY ADVISED IF 100% STOCK ROM****
otherwise relock could make more trouble.
Still not sure how to get IMEI back even if unlocked frp though.
**And please stop posting in other threads , the same problem , because you are getting help here.
your post in recovery thread is off topic to that thread and just makes the forum harder to maintain.

mrmazak said:
what about the "about phone" screen
what does it show for version?
If is all stock you should be able to go into deveolper options and enable "oem unlock". If it is greyed out and cannot switch it. Try First to remove google account (all accounts ). and reboot. See if can change then. If not, try Second to do "fastboot oem relock [enter your bootloader code here]
after relock and rebooted oem switch should be enabled again.
****RELOCK IS ONLY ADVISED IF 100% STOCK ROM****
otherwise relock could make more trouble.
Still not sure how to get IMEI back even if unlocked frp though.
**And please stop posting in other threads , the same problem , because you are getting help here.
your post in recovery thread is off topic to that thread and just makes the forum harder to maintain.
Click to expand...
Click to collapse
Thanks )
I'm so sorry for my posts, it's because I don't have a stable connection and I can't see notification of my thread.
I gave my phone to friend an he fix IMEI (I don't know how)
But OEM is steel lock.
I think he did it with using special box.

Mohammadreza76646 said:
Hi
I have a problem with my Honor 7X L21.
Because online update dose not work for this model I decided to updated my smartphone offline.
I downloaded Oreo update file
Unlock my phone
install twrp
update phone
every thing is going well until here
then I decided to root my phone but I saw there is no twrp on my phone
I search and I found a thread here that show how install twrp with adb use recovery ramdisk.
I install twrp on recovery ramdisk and try to root my phone. its OK but when my phone want to start its stuck on google page "just a sec..."
I boot my device on twrp and I did factory reset but the problem was still exist.
then I decided to flash update again.
I copy update file on SD card and wright code on twrp
but at the end when I reboot the recovery, twrp except stock recovery came up and my stock recovery was gone.
I reboot the system but Its loop on this page that says:
ERROR MODE
Attention!
Please update system again.
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
Please help me!!!
I try to install stock recovery and twrp with adb and huawei multi tools but it didn't work.
it shows:
"FAILED (remote: partition length get error)"
I try to unbrick my phone too but it shows same message that "FAILED (remote: partition length get error)"
Helllllp lpeaeaeaeaeaseeee!!![/QUOTE
Are u able.to boot into twrp ?
Click to expand...
Click to collapse

Hello I have a Huawei Mate-SE (with bootloader unlocked and rooted with magisk v16). I have been using the android custom rom RRO v6 (RR-O-v6.0.0-20180401-bnd-OpenKirin) for around a month now. I got this exact same problem about the White Screen saying "ERROR MODE Attention...." since I updated the Magisk to latest version (from the installed application) and rebooted my phone. SInce I rebooted I am getting that same error which makes the phone loops into it for a few times and then it loads the Huawei eRecovery that offers me some options that I am not sure what would do to my phone.
I have been trying to connect to adb tools/fastboot but it doesn't detect the phone and im pretty sure I have the device drivers installed on my computer since nothing have changed in my pc for a month now since I flashed RRO on it.
Is there any other mode besides recovery that would allow me to connect adb/fastboot to it? Or does anyone knows how should I proceed?

IonDEfeso said:
Hello I have a Huawei Mate-SE (with bootloader unlocked and rooted with magisk v16). I have been using the android custom rom RRO v6 (RR-O-v6.0.0-20180401-bnd-OpenKirin) for around a month now. I got this exact same problem about the White Screen saying "ERROR MODE Attention...." since I updated the Magisk to latest version (from the installed application) and rebooted my phone. SInce I rebooted I am getting that same error which makes the phone loops into it for a few times and then it loads the Huawei eRecovery that offers me some options that I am not sure what would do to my phone.
I have been trying to connect to adb tools/fastboot but it doesn't detect the phone and im pretty sure I have the device drivers installed on my computer since nothing have changed in my pc for a month now since I flashed RRO on it.
Is there any other mode besides recovery that would allow me to connect adb/fastboot to it? Or does anyone knows how should I proceed?
Click to expand...
Click to collapse
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)

mrmazak said:
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
Click to expand...
Click to collapse
Hi thank you I was able to finally detect the device now. I am unsure about the kernel is that the recovery.img or system.img files I downloaded (i saved every file i used when I installed the rom) or do I need to look for the kernel somewhere else? I do have the complete_twrp_ramdisk.img file though.
Edit, I did more research and found the stock kernel is withing the boot.img file which I dont have so I looked up for the official BND-L34 oreo update and im currently downloading to extract the stock boot.img from the update.zip and flash it. Since that download was going to take me a while anyway i tried flashing the twrp recovery file without success (didn't changed anything) so i guess I should follow the instructions you gave me by flashing the kernel first then the twrp recovery.

mrmazak said:
I have seen where the magisk update screwed up and patches the kernel intead of the ramdisk.
Power off , long press power button.
Hold volume down and plug in USB from PC.
This should cause it to boot into fastboot mode.
Then flash the stock kernel. And the stock or first patched ramdisk. (From earlier root)
Click to expand...
Click to collapse
Do you know what the boot.img files name is after extraction?
I have extracted all 3 update zips and cannot find anything called boot.img
By the way, thank you.. After updating magisk I have been dealing with failed recovery and failed boot for over a week and this is the first reply anywhere that looks promising

IonDEfeso said:
Hi thank you I was able to finally detect the device now. I am unsure about the kernel is that the recovery.img or system.img files I downloaded (i saved every file i used when I installed the rom) or do I need to look for the kernel somewhere else? I do have the complete_twrp_ramdisk.img file though.
Edit, I did more research and found the stock kernel is withing the boot.img file which I dont have so I looked up for the official BND-L34 oreo update and im currently downloading to extract the stock boot.img from the update.zip and flash it. Since that download was going to take me a while anyway i tried flashing the twrp recovery file without success (didn't changed anything) so i guess I should follow the instructions you gave me by flashing the kernel first then the twrp recovery.
Click to expand...
Click to collapse
if you were on oreo. then there is not a boot.img, instaed there is seperate ramdisk.img and kernel.img.
i have all the files already extracted for oreo and a backup from nougat as well.
https://androidfilehost.com/?w=files&flid=265998
make sure you know what you are doing before flashing.
for example. on oreo the boot and recovery share one kernel image. SO if kernel is messed up you will not be able to boot "boot" or "recovery"

error installing twrp recovery in honor 7x

My phone is Honor 7x BND-L21C10 . first i tried to open twrp recovery mode it showed "error mode" (its in attached picture ) and i tried to re install twrp through my pc and it is also showing failed (also in the attached picture) please help me with this i want to downgrade my phone software i really want to do it urgently

Sachinnemesis2525 said:
My phone is Honor 7x BND-L21C10 . first i tried to open twrp recovery mode it showed "error mode" (its in attached picture ) and i tried to re install twrp through my pc and it is also showing failed (also in the attached picture) please help me with this i want to downgrade my phone software i really want to do it urgently
Click to expand...
Click to collapse
The length over error message is common when you try to flash nougat partition "recovery" when device has Oreo partition layout. And needs Oreo TWRP flashed to "recovery_ramdisk"

mrmazak said:
The length over error message is common when you try to flash nougat partition "recovery" when device has Oreo partition layout. And needs Oreo TWRP flashed to "recovery_ramdisk"
Click to expand...
Click to collapse
can you help me with it share the link

Sachinnemesis2525 said:
can you help me with it share the link
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-7x/development/oreo-twrp-complete-backup-t3764500