Develop Bugs

[ROM][WWE]HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.2 6_1.09.25.23

Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe

What changes had been made in version 2.03?
Is it safe enough to use

can i ask u were u getting all these from ?

tabarda said:
Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe
Click to expand...
Click to collapse
Hey Tuga Men.
Did you test it?

pacharru said:
Hey Tuga Men.
Did you test it?
Click to expand...
Click to collapse
Hi friend,
No, install the English version 2:03

http://forum.xda-developers.com/showthread.php?t=471699

tabarda said:
Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe
Click to expand...
Click to collapse
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?

misa_reg said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?
Click to expand...
Click to collapse
the same to me

misa_reg said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?
Click to expand...
Click to collapse
You already have it.
There is a problem installing these ROMs via an Activesync connection. You need to flash from Internal Storage. Also, make sure you have HardSPL installed before you flash.
Instructions for flashing from internal storage:
Extract the RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Dia mond_52.51.25.26_1.09.25.23_Ship.exe file to a new directory on your PC
Find the RUU_signed.nbh file in this new directory and rename it to Diamimg.nbh
Copy Diamimg.nbh to the root of Internal Storage
Hold in the volume down button + the back button (thats the top right button on the front to the right of the big middle jog control) + soft reset
Follow instructions on screen
When the process is complete (it will say UPDATE SUCCESS) then reset

Thank You! Great! Updated succesfull, but this is new update method for me!
What is the differend betwen 2.03.401.2 and 2.03.456.2 ?

Any other mirrors available?

misa_reg said:
Thank You! Great! Updated succesfull, but this is new update method for me!
What is the differend betwen 2.03.401.2 and 2.03.456.2 ?
Click to expand...
Click to collapse
Yes, same question. I already installed "RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship". what is the different? thank you.

pdaman said:
Yes, same question. I already installed "RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship". what is the different? thank you.
Click to expand...
Click to collapse
Only the numbers are different and xt9, propebly support ME language, nothing else

Megaupload
http://www.megaupload.com/?d=WTS8UQKB

I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.40 Olinex SPL i carnt sync with computer and carnt get out of try colour screen so i dont think i can update from phone ive tryed to flash a cooked rom still get same message please help what should i do thanks

Same here, do have HARD-SPL on it, tried several times. But now I cannot seem to soft or hard-reset....so cannot try to install it from the interal storage as well....is it bricked now?

buff said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.40 Olinex SPL i carnt sync with computer and carnt get out of try colour screen so i dont think i can update from phone ive tryed to flash a cooked rom still get same message please help what should i do thanks
Click to expand...
Click to collapse
Flash with HardSPL 1.34,and hard reset.

sorry but keep trying but all i get is file error 240 file open have you got any ideas on what or how to do it thanks

hello!
can someone tell me how to extract the .nbh file from the exe file, or even upload it somewhere. i'm not able to flash this rom to my diamond(same error with corrupted file). i have hspl 1,93.

tzacanel said:
hello!
can someone tell me how to extract the .nbh file from the exe file, or even upload it somewhere. i'm not able to flash this rom to my diamond(same error with corrupted file). i have hspl 1,93.
Click to expand...
Click to collapse
Uuse winRAR to open the exe file and extract the contents to a folder which will contain NBH file

i think my phone is bricked......

made a custom rom using the kitchen tool followed every step. i used my dump raw files part01, part02 with RUU_signed.nbh files from the xda forum.i flashed my rom and everything was done normally and now it just freezes at the beginning. all i see is Touch diamond with the info about my rom
r 1.11.25.01
g 52.58.25.30u
d 2.03.00.00
is my phone bricked?

evank418 said:
made a custom rom using the kitchen tool followed every step. i used my dump raw files part01, part02 with RUU_signed.nbh files from the xda forum.i flashed my rom and everything was done normally and now it just freezes at the beginning. all i see is Touch diamond with the info about my rom
r 1.11.25.01
g 52.58.25.30u
d 2.03.00.00
is my phone bricked?
Click to expand...
Click to collapse
If uu cant enter the bootloader (vol down+reset) 3colored screen, yepp is bricked you should have hspl installed 1st

evank418 said:
made a custom rom using the kitchen tool followed every step. i used my dump raw files part01, part02 with RUU_signed.nbh files from the xda forum.i flashed my rom and everything was done normally and now it just freezes at the beginning. all i see is Touch diamond with the info about my rom
r 1.11.25.01
g 52.58.25.30u
d 2.03.00.00
is my phone bricked?
Click to expand...
Click to collapse
Enter the boot loader using the method in the post above this. Once in there you'll be able to plug in your USB cable and 'USB' will appear on the bottom section of the bootloader. You can then go flash a ROM from your PC as if it was connected to ActiveSync.

i've managed to load up bootloader and installed one of donors rom, but now i can't go back to my original korean rom...it is not released and all i have is 4 dump raw files from it. i tried building rom with .nbh from the donors....but phone kept freezing.....weird......

Here you go (extract with 7zip); HardSPL is necessary to flash:
http://www.filefactory.com/file/af75c82/n/SKT_KOREA_7z_001
http://www.filefactory.com/file/af75dab/n/SKT_KOREA_7z_002
http://www.filefactory.com/file/af75da3/n/SKT_KOREA_7z_003
Flashed and tested; no problems here.

downloading it right now. thank you so much!!!

How to install RRU file

hey guys i wanna upgrade to 6.5 again, but ive just got 1 file which is a NBH how am i ment to install
thanks

Copy rom to your root storage card - then flash from it. It's faster and safer .

thangkls said:
Copy rom to your root storage card - then flash from it. It's faster and safer .
Click to expand...
Click to collapse
my phone has intergrated memory so no micro ds card, can i just upgrade from that then?

sorry i ment a NBH file

Sorry for mistake - Internal storage !
I has O2 Ignito ( the same with HTC Diamond ) - and I always flash via Internal storage.
Have you ever read the sticky out there ?
You have to do Hard SPL first :
http://forum.xda-developers.com/showpost.php?p=2508373&postcount=1
If you've done that before - follow this help:
1: Download a ROM of your Choice, RENAME the *.nbh for your ROM to: DIAMIMG.nbh
2: Copy DIAMIMG.nbh to the "Internal Storage" of your Device.
3: Hold "Vol Down and Back" (Back = Small Arrow above "End Call" Button) + reset button to Initiate ROM Flash.
4: After ROM flash- do Hard-reset again (Pen Reset, then Press and Hold Vol Down and Circle) again, on completion "Press Vol Up To Boot" Is displayed, press "Vol Up" and allow the ROM to boot.
Click to expand...
Click to collapse

thanks mate, ive upgraded to a 6.5 build and im happy, just gotta do the partners HTC touch 3g now lol

Thans, its works with my HTC Diamond.
i have one question
Where i can get original ROM for HTC Diamond ?
so i can restore ROM to original state..
thank you

On the website of HTC

the easiest way
tanx dear i have upgraded mine-htc td

Thanks for this thread

so i did everything and i have a screen that says
diaming.nbh - ok
os - ok
update complete
update success
and the bar is full
what am i doing now?turn it off and on again or something else?

soft reset your phone by pressing the red button inside the stylus hole
or remove your battery

very useful and simple post,
ty for this.

[Error 226] My phone is brick ?

Hello,
After a flash of GenY 1.1 by MTTY (and internal storage) the flash stop at 71% with a 226 error.
Now I can't flash HardSPL (flash goes to 100% but the version of my HSPL in bootloader still the same !). I can't flash on official rom (stop at 61% with same error code).
Anyone now if it's possible to do something for that ?
Thanks
PS : sorry for my english !

I can never change my hardspl without using the jumpspl technique as in link below for hardspl 1.24
http://forum.xda-developers.com/showthread.php?t=408621
It always stays the same despite reaching 100%
HTH
Bixx

Try:
http://forum.xda-developers.com/showpost.php?p=1518700&postcount=11

Hi !
I've tried to flash HSPL 1.24 but like my phone doesn't boot, I can't copy and execute JumpSPL.exe and the RomUpdateUtility can't flash the HSPL.
JR_de > i's for the trinity, the 1.20 Olipro it's not for diamond, and I'm no SuperCID.
I've tried with 1.40 Olinex Unsigned with mtty command in your link but still the same error when I flash an official rom (2.03.406....)
thanks for your answers

try to change the usb port from pc and still try yr phone is not brick

I try with another usb port, and another computer, the results it's the same !

tom62 said:
I try with another usb port, and another computer, the results it's the same !
Click to expand...
Click to collapse
ever tried to change the usb cable?

Yes I try to flash with a second usb cable....
I believe there is no solution !

OS?
On what OS are you trying this?
Windows XP / Vista / 7 32bit? 64Bit?

Try this: http://forum.xda-developers.com/showthread.php?t=578231

is there a bootble ROM on it?
if so , download a stock image from HTC and copy to top level of your 4GB
reset and press the enter and back buttons
follow on screen instructions
i recomend that you flash like this, much safer
good luck

hello, happy new year everybody !!
there is no bootble ROM on my diamond.
I have no access to the internal storage, I can't copy a nbh file on it.
I try to flash an hspl with change .nbh after click on the first "next" in the customRuu, but the version of the hspl always doesn't change, and error 260 when I flash an OS rom...

nobody has a solution ?!

Try and flash back to stock SPL, check my sig
after that, try and flash stock OS
if either fail, send to HTC
Good Luck
Badwolve1

Flashing a Recovery,Kernel and Rom[FAQ'S][NOOB FRIENDLY]

Easiest guide to flash a custom ROM and custom kernel
Lets accept it,we all have been here,confused what should do after i root/boot unlock
we think i know enough so lets get this going but then, we get stuck in the splash/welcome screen and we think **** this was such a bad idea
SO i created this thread for anyone who ever is confused,lost,seeking help.
IF YOU FIND THIS THREAD HELPFUL, BE SURE TO RECOMMEND IT TO OTHERS AND PRESS THE THANKS BUTTON :d
Thread Contents
1.Common terms/Android Slangs
2.Basic Requirements
3.Download links for Recovery Images for PRIMO U/ PRIMO C]
4.How To flash recovery
5.FAST BOOT FILES(download links) : HTC ONE V DRIVER (DOWLOAD LINKS)
6.How To Back Up Your Current Rom
7.Installing Your ROM
8.Choose Your Kernel(download links)
9.Flashing The Kernel[windows]
*Flashing The Kernel[MAC]
10.people who have already flashed a ROM and are confused how to upgrade it
11.Upgrading KERNEL
12.Stuck in Bootloops, Cant Pass the HTC welcome Screen
13.Some tips from me
Click to expand...
Click to collapse
Hope u have successfully rooted and boot unlocked
Common Terms/Android Slangs
a small guide on some of the android terms my Diablo67
Bootloader:This small program's only job is to load other data and programs which are then executed from RAM.Often, multiple-stage boot loaders are used, during which several programs of increasing complexity load one after the other in a process of chain loading.
Fastboot:A diagnostic protocol used primarily to modify the flash filesystem in Android smartphones from another computer over a USB connection. It is part of the Android Debug Bridge library.
Utilizing the Fastboot protocol requires that the device be started in a boot loader or Second Program Loader mode in which only the most basic hardware initialization is performed. After enabling the protocol on the device itself it will accept any command sent to it over USB via a command line. Some of most commonly used fastboot commands include:
•flash - Overwrites a partition in flash with a binary image stored on the host computer.
•erase - Erases a partition in flash.
•reboot - Reboots the device into the either the main operating system or the system recovery partition.
•devices - Displays a list of all devices (with Serial #) connected to the host computer.
Flashing:The ROM memory used in smartphones and tablets etc. is often same as flash memory found in SD cards and USB flash drives, simply optimized for better speed and performance while running the operating system.
Kernel:A kernel is a layer of code that allows the OS and applications to interface with your phone's hardware. The degree in which you can access your phone's hardware features depends on the quality of code in the kernel. The homebrew (rooting) community for HTC has made several kernel code improvements that give us additional features from our hardware that the stock kernel does not. When you flash a custom ROM, you automatically get a kernel. But you can also flash a standalone kernel ROM on top of the existing one, effectively overwriting it. These days, the difference in custom kernels is less about new features and more about alternate configurations. Choosing a custom kernel is basically choosing one that works best with your ROM.
Nandroid:To backup the current running rom.
Recovery Mode:A small separate operating mode you can boot your device into, used for device administration. Two popular custom recovery modes are Amon Ra and Clockwork.
Basic Requirements
1.A Boot-unlocked and Rooted HTC One V
2.Charge it till above 75% battery
2.A PC(this guide is for now only for windows)
3.usb cable
4.HTC driver download here or HTC SYNC
5.FastBoot Files[ click here>>> download them and put in a folder in c drive ]
> example c:\fastboot or c:\android
6.A recovery image(for image scroll down)
7.A Rom(thats ur choice)
8.boot image(scroll down)
9.put the rom(.zip file) in sd card
Here Are The Recovery Images
Recovery Images[PRIMO U/GSM]
1. CWM 6 by Lloir
2. TWRP 2.6.0 <<Ill Recommend [very user friendly]
3. CWM v5 Touch Recovery
Recovery Images[PRIMO C/CDMA
1. [VM/PRIMOC][RECOVERY] CWM Recovery
2. [VM/PRIMOC][RECOVERY] TWRP2 Recovery
3. [RECOVERY] [PRIMOC/CDMA] CWM 6.0.1.5
How To flash recovery
HOPE U HAVE THE FAST BOOT FILES
[IF NOT]
click here download them and put in a folder in c drive
example c:\fastboot)
>>Now enter Fast boot(power button +volume DOWN(for 15 + sec))<<<
u might have arrived at Hboot boot mode>>> now move up down by pressing the volume buttons and select fastbootwith the power button
Flash it via cmd(command prompt)
Enter these commands
Code:
[B][COLOR="Red"]fastboot flash recovery recovery.img
[/COLOR][/B]
How To Back Up Your Current Rom
(must for first time flashers)(nand=backup of current ROM)
1. Once the CWM/TWRP recovery installed:
Now enter Fast boot(power button +volume DOWN(for 15 + sec))
now move up down by pressing the volume buttons and select fastbootwith the power button
2. Once you are in the RECOVERY menu:
click backup and restore
click backup
the backup process is running. It will be a max 20 minutes to complete.
(optional step just to be sure)
3. once complete, check whether the backup is successful
click backup and restore
click restore
you will see your backup files, for example 2012-11-27 11-7
it should complete with in a span of time
4.Now if that is over go back to the previous menu
use the back button
click reboot system now to boot your device
Installing Your ROM
5.just do a factory reset and wipe cache, then click on install from sd card
6.flash it(the ROM in ur sd card shud be in a .zip format)
7.NOW.DON'T REBOOT UR PHONE GO TO FAST BOOT MODE (VOLUME DOWN+ POWER BUTTON)(or there will be a option to reboot into bootloader)
Choose Your Kernel
9.download whichever kernel u want
[CDMA/PRIMO C]
SuperSick kernel Click ME
SICK kernel PRIMO C/CDMA click here
[GSM/PRIMO U]
SuperSick kernel Click ME
SICK kernel CLICK here
TITANIUM KISS kernel SENSE users CLICK here
HELLBOY kernel FOR AOSP based ROMS(cm9/cm10/AOKP/PA)USE THE LATEST ONE FOR 4.2.2 >click<
Flashing The Kernel[windows]
8.HOPE U HAVE THE FAST BOOT FILES (if not click here download them and put in a folder in c drive)
rename it boot.img and put it in the folder as the fastboot files
GO TO FAST BOOT MODE (VOLUME DOWN+ POWER BUTTON)(or there will be a option to reboot in recovery)
10.flash it via CMD
Enter these commands
Code:
11.[B][COLOR="Red"]Fastboot flash boot boot.img [/COLOR][/B]
12.[B][COLOR="Red"]fastboot reboot[/COLOR][/B]
Flashing The Kernel[MAC] by kalaker
kalaker said:
Go developer.android.com and download the SDK & move it to your home directory ("~" or /Users/<username>)
Go to <sdk-location>/tools and launch "Android"
Download the platform tools
Open terminal
Open Finder to <sdk-location>/platform-tools
In terminal, type "sudo cp"; drag adb from the Finder window into the Terminal window; type "/usr/bin/"; hit enter
Enter your password
Repeat the above three steps, but drag "fastboot" instead of "adb"
Close terminal
Open terminal (it sounds weird, but just do it)
Now, and forever, do this to install a kernel:
Download kernel
Connect phone to computer
Make sure USB Debugging is enabled (Settings>Development>USB Debugging)
In terminal, type "adb reboot bootloader"
In terminal, type "fastboot flash boot"; drag in the kernel from finder; hit enter
Examples:
Code:
sudo cp /Users/Username/android-sdk-mac/platform-tools/adb /usr/bin/
sudo cp /Users/Username/android-sdk-mac/platform-tools/adb /usr/bin/
adb reboot recovery
fastboot flash boot /Users/Username/Downloads/boot.img
Click to expand...
Click to collapse
13.enjoy
First boot takes some time have patience......be sure to ask questions or doubts
Ok For people who have already flashed a ROM and are confused how to upgrade it
Upgrading ROM
1.download your needed ROM
2.put in SD card
3.boot into recovery
4.no need to wipe everything,wipe caches(and if the dev says to full wipe do it)
5. (Unless u come from a different ROM eg.From Amazing Sense To CM10, in this case a factory reset i needed
6.flash the ROM
7.reboot
8.flash GAPPS
9. enjoy
Upgrading KERNEL
1.boot in bootloader
2.do the required steps(as mentioned above)
3.wipe caches
5.enjoy
Stuck in Bootloops, Cant Pass the HTC welcome Screen
ok, calm down, everyone has this problem while flashing, i get it so many times, they can cause by the following reasons
bad flash
wrong rom
you forgot to flash the kernel
wrong kernel
messed up the order in flashing
ok,
1.Bad flash-this occurs if the .zip file is corrupted
solution:= re flash the ROM, if still no, download the file again and try
2.wrong ROM- u may have downloaded a ROM that is not for ur device or a ROM which is of not ur description
for example u might me a PRIMO C device/CDMA and u downloaded a PRIMO U/GSM ROM
3.Wrong Kernel-Kernel is the link between ur software and hardware, if u flash the wrong one like the case mentioned above , download the correct one and re flash
4.[ FLASHING YOUR KERNEL SHOULD BE THE LAST STEP][UNLESS U HAVE A S-OFF DEVICE]
Ok Some Tips Which May Help You
1.Battery Draining fast?
-----get an app called BetterBatteryStats,run it over night.then next morning open it and check whats waking your device
Click to expand...
Click to collapse
2.Can i use scripts?
-----Your wish, the rom works perfect,running a script can ruin it in some cases(chill,even i run some)
Click to expand...
Click to collapse
3.Good/best/recommended ROMS?
-----all roms are good in their own way, but i can give u a list of recently updated roms
-----1.sphongle(4.2.2) 2.Slimbean 3.Cm10
Click to expand...
Click to collapse
will add more cheers
Hope this helps u

another get thanks quick scheme thread?
Sent from my One V

paarthdesai said:
another get thanks quick scheme thread?
Sent from my One V
Click to expand...
Click to collapse
LOL :silly:

no i plan to help!

My works
You call that work ??
Those are just tips

Y do u have a problem with that
Sent from my One V

No but that work word is pissing me off ..... For using it in a inappropriate place

donhashem.dh said:
No but that work word is pissing me off ..... For using it in a inappropriate place
Click to expand...
Click to collapse
Don't read it
Sent from my One V

to clarify, step 6: "flash" should be edited to say " install ROM from zip" to avoid the "flash" misconception associate with flashing kernels:good:

more detailed work should be there.. like you said install cwm or twrp.... give a link to where they are embedded in the words will be good...
and the above goes for the flashing rom part also...embed the link to the dev section
make it easy and tidy instead of all those ugly looking clutters you did
Sent from my One V

will work into that!

did it!

cybervibin said:
flash it via cmd
Enter these commands
Fastboot flash recovery recovery.img
Click to expand...
Click to collapse
You forgot to mention to boot into fastboot. No offence, but it has to be much better written. Its not noob friendly at all.

m sorry abt that! guess missed it! wrote the thread throygh my phone!
any other problems i corrected the one u said!

cybervibin said:
m sorry abt that! guess missed it! wrote the thread throygh my phone!
any other problems i corrected the one u said!
Click to expand...
Click to collapse
Yeah, you could try creatign sub sections, like thinigs to have before swap, then steps after that. Eg in step 1 you say
>>Now enter Fast boot(power button +volume DOWN(for 15 + sec))<<<
and
1.Flash CWM 6 by lloir
or TWRP 2.3.1.0 ill recommend TWRP
>>PRIMO C /CDMA click here<<
To flash recovery HOPE U HAVE THE FAST BOOT FILES(IF NOT click here download them and put in a folder in c drive
example c:\fastboot
Click to expand...
Click to collapse
First you mention the ROM, then out of the blue you mention recovery. ROM should be introduced after a nand backup. You should also explain in short what a nand backup is. A sentence with an analogy is sufficient. I am a software developer and I would like to share a rule that I follow: If you need to add a comment in your code, that means the code is not readable. In the same way, when you mention something in bracket, it itself means that the sentence is no clear, and need rephrasing and rewording.
Dont get me wrong, I am not trying to insult or berate or anything, but I got it read by a friend who wants to flash his One V, and he got back to me with more questions than the guide answered. There a some step holes in the guide, and you have to write is as if you are a noob
Lastly, thanks a lot, this particular guide and your answers have been really helpful to me and the community.
Cheers!

now ill consider that! hard being a noob!

thetuxracer said:
If you need to add a comment in your code, that means the code is not readable. In the same way, when you mention something in bracket, it itself means that the sentence is no clear, and need rephrasing and rewording.
Click to expand...
Click to collapse
Nice, I liked this!
Sent from my One V using xda app-developers app

soham_sss said:
Nice, I liked this!
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
thetuxracer said:
Yeah, you could try creatign sub sections, like thinigs to have before swap, then steps after that. Eg in step 1 you say
First you mention the ROM, then out of the blue you mention recovery. ROM should be introduced after a nand backup. You should also explain in short what a nand backup is. A sentence with an analogy is sufficient. I am a software developer and I would like to share a rule that I follow: If you need to add a comment in your code, that means the code is not readable. In the same way, when you mention something in bracket, it itself means that the sentence is no clear, and need rephrasing and rewording.
Dont get me wrong, I am not trying to insult or berate or anything, but I got it read by a friend who wants to flash his One V, and he got back to me with more questions than the guide answered. There a some step holes in the guide, and you have to write is as if you are a noob
Lastly, thanks a lot, this particular guide and your answers have been really helpful to me and the community.
Cheers!
Click to expand...
Click to collapse
how about now, noob friendly enough?

Yup, pretty cool! If there was a way to thank again..

ty!! please keep the recomendations coming!