Flashing Rom with Hard Spl 3.34 usbforced - Upgrading, Modifying and Unlocking

Hi guy,
I would like to flash my kaiser with this rom PDA Corner Ultimate v11.
I have a problem in executing the first step ... (Hard SPL)
Normaly run the file (. exe) but in the file "
DaveShaw (. Hard)
3:34 Hard SPL nostuckinSPL Force USB "
There is not ... How do I run?
Thanks

Antony20miles said:
Hi guy,
I would like to flash my kaiser with this rom PDA Corner Ultimate v11.
I have a problem in executing the first step ... (Hard SPL)
Normaly run the file (. exe) but in the file "
DaveShaw (. Hard)
3:34 Hard SPL nostuckinSPL Force USB "
There is not ... How do I run?
Thanks
Click to expand...
Click to collapse
I have just flashed my kaiser with
HardSPL="kaiser-HardSPLv1"
Radio="1.65.29.22"
ROM cooked="TIR 8K"
but in this HardSPL (3:34 Hard SPL nostuckinSPL Force USB )there isn't "file.exe", but only "ruu_signed.nbh".
How can i do to flash without the "file.exe"?
Thanks

Related

Problem after flashing Trinity with rom Ausdim WM6.1 V3

Hello everybody, actually I flashed my trinity with rom Ausdim WM6.1 V3 LIGHT , but i found a problem with this rom, in fact, in my device, i can not install or execute any other application, so i tried to flash an other rom (Mary SL 3.7) but in vain, i tried with SSPL-Trin but i coudn't execute it from my pda ( a problem of a security certificate or something like that) and when I push power+Camera+reset , i can access to the bootloader spl-1.07.0000 but when i try to flash , the operation stops at 2% and i receive an error : file corrupted. I tried with other cooked roms but i have always the same problem. An the last thing i've tried was trying to flash system from the minisd card, i formatted it to fat32 an i put the file TRINIMG.nbh but when i boot in bootoader it shows a message "loading..." then it shows a number "00068002", so could you please help me and thank you
=======Problem solved==========
Hi!
Can you please post how you solved the problem, to help other people that maybe have this situation in a future?
Thanks!
Actually i realized that i coudn't flash any other rom with the original SSPL, so i had the idea to try with the original htc wm5, and it worked.
you really need to flash hard-spl as well.. you're playing with fire

[ROM][WWE]HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.2 6_1.09.25.23

Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe
What changes had been made in version 2.03?
Is it safe enough to use
can i ask u were u getting all these from ?
tabarda said:
Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe
Click to expand...
Click to collapse
Hey Tuga Men.
Did you test it?
pacharru said:
Hey Tuga Men.
Did you test it?
Click to expand...
Click to collapse
Hi friend,
No, install the English version 2:03
http://forum.xda-developers.com/showthread.php?t=471699
tabarda said:
Mirror for this version.
http://rapidshare.com/files/1848450...igned_Diamond_52.51.25.26_1.09.25.23_Ship.exe
Click to expand...
Click to collapse
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?
misa_reg said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?
Click to expand...
Click to collapse
the same to me
misa_reg said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.93 Olinex SPL, this is problem?
Where can i find the latest working English or Europian 2.03 version?
Click to expand...
Click to collapse
You already have it.
There is a problem installing these ROMs via an Activesync connection. You need to flash from Internal Storage. Also, make sure you have HardSPL installed before you flash.
Instructions for flashing from internal storage:
Extract the RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Dia mond_52.51.25.26_1.09.25.23_Ship.exe file to a new directory on your PC
Find the RUU_signed.nbh file in this new directory and rename it to Diamimg.nbh
Copy Diamimg.nbh to the root of Internal Storage
Hold in the volume down button + the back button (thats the top right button on the front to the right of the big middle jog control) + soft reset
Follow instructions on screen
When the process is complete (it will say UPDATE SUCCESS) then reset
Thank You! Great! Updated succesfull, but this is new update method for me!
What is the differend betwen 2.03.401.2 and 2.03.456.2 ?
Any other mirrors available?
misa_reg said:
Thank You! Great! Updated succesfull, but this is new update method for me!
What is the differend betwen 2.03.401.2 and 2.03.456.2 ?
Click to expand...
Click to collapse
Yes, same question. I already installed "RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship". what is the different? thank you.
pdaman said:
Yes, same question. I already installed "RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship". what is the different? thank you.
Click to expand...
Click to collapse
Only the numbers are different and xt9, propebly support ME language, nothing else
Megaupload
http://www.megaupload.com/?d=WTS8UQKB
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.40 Olinex SPL i carnt sync with computer and carnt get out of try colour screen so i dont think i can update from phone ive tryed to flash a cooked rom still get same message please help what should i do thanks
Same here, do have HARD-SPL on it, tried several times. But now I cannot seem to soft or hard-reset....so cannot try to install it from the interal storage as well....is it bricked now?
buff said:
I try to install this version, flash go to 100%, and write: error 270, image file corrupted. The PDA screen wait it bootloader mode to retry flashing.
I have 1.40 Olinex SPL i carnt sync with computer and carnt get out of try colour screen so i dont think i can update from phone ive tryed to flash a cooked rom still get same message please help what should i do thanks
Click to expand...
Click to collapse
Flash with HardSPL 1.34,and hard reset.
sorry but keep trying but all i get is file error 240 file open have you got any ideas on what or how to do it thanks
hello!
can someone tell me how to extract the .nbh file from the exe file, or even upload it somewhere. i'm not able to flash this rom to my diamond(same error with corrupted file). i have hspl 1,93.
tzacanel said:
hello!
can someone tell me how to extract the .nbh file from the exe file, or even upload it somewhere. i'm not able to flash this rom to my diamond(same error with corrupted file). i have hspl 1,93.
Click to expand...
Click to collapse
Uuse winRAR to open the exe file and extract the contents to a folder which will contain NBH file

[Error 226] My phone is brick ?

Hello,
After a flash of GenY 1.1 by MTTY (and internal storage) the flash stop at 71% with a 226 error.
Now I can't flash HardSPL (flash goes to 100% but the version of my HSPL in bootloader still the same !). I can't flash on official rom (stop at 61% with same error code).
Anyone now if it's possible to do something for that ?
Thanks
PS : sorry for my english !
I can never change my hardspl without using the jumpspl technique as in link below for hardspl 1.24
http://forum.xda-developers.com/showthread.php?t=408621
It always stays the same despite reaching 100%
HTH
Bixx
Try:
http://forum.xda-developers.com/showpost.php?p=1518700&postcount=11
Hi !
I've tried to flash HSPL 1.24 but like my phone doesn't boot, I can't copy and execute JumpSPL.exe and the RomUpdateUtility can't flash the HSPL.
JR_de > i's for the trinity, the 1.20 Olipro it's not for diamond, and I'm no SuperCID.
I've tried with 1.40 Olinex Unsigned with mtty command in your link but still the same error when I flash an official rom (2.03.406....)
thanks for your answers
try to change the usb port from pc and still try yr phone is not brick
I try with another usb port, and another computer, the results it's the same !
tom62 said:
I try with another usb port, and another computer, the results it's the same !
Click to expand...
Click to collapse
ever tried to change the usb cable?
Yes I try to flash with a second usb cable....
I believe there is no solution !
OS?
On what OS are you trying this?
Windows XP / Vista / 7 32bit? 64Bit?
Try this: http://forum.xda-developers.com/showthread.php?t=578231
is there a bootble ROM on it?
if so , download a stock image from HTC and copy to top level of your 4GB
reset and press the enter and back buttons
follow on screen instructions
i recomend that you flash like this, much safer
good luck
hello, happy new year everybody !!
there is no bootble ROM on my diamond.
I have no access to the internal storage, I can't copy a nbh file on it.
I try to flash an hspl with change .nbh after click on the first "next" in the customRuu, but the version of the hspl always doesn't change, and error 260 when I flash an OS rom...
nobody has a solution ?!
Try and flash back to stock SPL, check my sig
after that, try and flash stock OS
if either fail, send to HTC
Good Luck
Badwolve1

Need A Guide To Hard Spl Without Active Sync!

Dear Expert!
I'm Looking for a guide how to Hard SPL Diamond To Onilex or anything with bootloader mode Because My Htc is stuck with The Touch Diamond Screen and won't boot at all! Thanks It have the original spl!
too easy .. rename the ( *.NBH ) file to ( diamimg.NBH )
- copy it directly to the internal storage
- hold down VOLUME + reset your phone
- follow the steps.
......................
.. rename the ( *.NBH ) file to ( diamimg.NBH )
- copy it directly to the internal storage
- hold VOLUME down and back arrow + reset (keep holding volume down and back arrow)
- follow the steps... will tell you to press power button to begin.
Ahem.. he says he doesnt even have hardspl installed.
For as far as I know you can only install HSPL with the RUU included.
Did you try to flash a custom ROM without HSPL?
the hardslp is also a nbh...
Yes but if he flashed a custom ROM that wont boot without HSPL his Diamond is probably bricked..
Flash a Stock Rom from Bootloader tu "unbrick" your Diamond and get a somewhat "defined" state.
The other way is to boot into the bootloader and flash HArdSPL from there.

help me Your OS isn't customized

Your OS isn't customized
for your hardware.
Please reflash the proper
ROM code or contart the
service crnter
DIAM120 64M
SLP-1.39.0000
MicroP-Diam ATAGE_PVT v0x32
IMEI 357568011556722
SN HT842GN29676
help me
Lets try again...this time different approach.
Okay lets try to save your device again.
Solution 1
-Remove your battery. Yes! Remove your battery.
-Keep it out for 10 minutes
-After 10 minutes have passed. Insert your battery.
-Now switch ON your device and see what happens.
IF YOU STILL get the same message, then repeat Solution 1 again for 15 minutes this time.
IF that did not work come to Solution 2
Solution 2
Step 1.
PUT UR DEVICE IN BOOTLOADER MODE. Press reset button with stylus and keep holding volume down key.
Step 2. Download this, extract and try to install
http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
Now go to BOOTLOADER MODE again. Your SPL should be 1.40.Olinex
Step 3. Download this, extract and try to install
http://www.4shared.com/file/W25srZQT/DiamonCustomRUU_Radio_1002505.html
Step 4. Download this, extract and try to install
http://rapidshare.com/#!download|706l3|261693573|Diamond_Cloudy_1.3.zip|73779
IF YOUR Device is working again. Let me know. Then we will find a solution to have chinese on your device again.
Step 4. Download this, extract and try to install
http://rapidshare.com/#!download|706..._1.3.zip|73779
can't download it
Step 2. Download this, extract and try to install
http://forum.xda-developers.com/atta...2&d=1213719705
stop 0%
What is your SPL from bootloader mode.
Is it 1.40.Olinex
Btw is your diamond htc branded or dopod branded?
Still 1.39.00
my diamond is htc branded
Lets try HSPL 1.93 then
Download and try to see if you can install via BOOTLOADER mode
http://forum.xda-developers.com/attachment.php?attachmentid=474155&stc=1&d=1293448754
If successful your SPL should be 1.93.Olinex
Lemme know what happens
If HSPL 1.93 has been successfull, you can try this ROM
AZTOR (AlphaZero)
http://xdadev.f1ip.net/index.php?dir=Diamond/Roms/AlphaZero/&file=AZTOR-V6-WWE.rar
or any other rom of your choice.
I NEED S910 Original ROM
So its dopod after all eh..
Here you go. This is for dopod s910
http://shipped-roms.com/download.ph...52.66.25.35_1.15.25.14_Test.exe&send_file=yes
flash and tell us what happens

Categories

Resources