Need A Guide To Hard Spl Without Active Sync! - Touch Diamond, MDA Compact IV ROM Development

Dear Expert!
I'm Looking for a guide how to Hard SPL Diamond To Onilex or anything with bootloader mode Because My Htc is stuck with The Touch Diamond Screen and won't boot at all! Thanks It have the original spl!

too easy .. rename the ( *.NBH ) file to ( diamimg.NBH )
- copy it directly to the internal storage
- hold down VOLUME + reset your phone
- follow the steps.

......................

.. rename the ( *.NBH ) file to ( diamimg.NBH )
- copy it directly to the internal storage
- hold VOLUME down and back arrow + reset (keep holding volume down and back arrow)
- follow the steps... will tell you to press power button to begin.

Ahem.. he says he doesnt even have hardspl installed.
For as far as I know you can only install HSPL with the RUU included.
Did you try to flash a custom ROM without HSPL?

the hardslp is also a nbh...

Yes but if he flashed a custom ROM that wont boot without HSPL his Diamond is probably bricked..

Flash a Stock Rom from Bootloader tu "unbrick" your Diamond and get a somewhat "defined" state.
The other way is to boot into the bootloader and flash HArdSPL from there.

Related

After bricking ?

Hello
If device bricked is possible with recovery microsd method ;
Just put "RUU_signed.nbh" from O2 orginal image to root directory
and after Hard reset with bootloder modus ?
thx
6600 said:
Hello
If device bricked is possible with recovery microsd method ;
Just put "RUU_signed.nbh" from O2 orginal image to root directory
and after Hard reset with bootloder modus ?
thx
Click to expand...
Click to collapse
TAKE A LOOK HERE : http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
FROM XDA-WIKI SECTION :
" 1. Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it from your computer using a card reader (in some cases format doesn't work).
2. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
3. Rename the .NBH file to ARTEIMG.nbh and copy it to the root folder of your microSD card.
4. With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Record button and using the stylus at the same time to press the RESET button at the left side).
5.You should see the screen pictured on the left, confirm flashing on screen by pressing the volume slider down.
6. Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
!!!! SuperCID devices are able to flash any NBH image using this method. "
I unbricked my Orbit with the original ROM from O2.
Firstly put your Orbit in Bootloader mode (reset and record button)
Then using the task manager stop ActiveSync processes.
Then connect the phone via USB and then run the RUU program.
Works fine!

How to install RRU file

hey guys i wanna upgrade to 6.5 again, but ive just got 1 file which is a NBH how am i ment to install
thanks
Copy rom to your root storage card - then flash from it. It's faster and safer .
thangkls said:
Copy rom to your root storage card - then flash from it. It's faster and safer .
Click to expand...
Click to collapse
my phone has intergrated memory so no micro ds card, can i just upgrade from that then?
sorry i ment a NBH file
Sorry for mistake - Internal storage !
I has O2 Ignito ( the same with HTC Diamond ) - and I always flash via Internal storage.
Have you ever read the sticky out there ?
You have to do Hard SPL first :
http://forum.xda-developers.com/showpost.php?p=2508373&postcount=1
If you've done that before - follow this help:
1: Download a ROM of your Choice, RENAME the *.nbh for your ROM to: DIAMIMG.nbh
2: Copy DIAMIMG.nbh to the "Internal Storage" of your Device.
3: Hold "Vol Down and Back" (Back = Small Arrow above "End Call" Button) + reset button to Initiate ROM Flash.
4: After ROM flash- do Hard-reset again (Pen Reset, then Press and Hold Vol Down and Circle) again, on completion "Press Vol Up To Boot" Is displayed, press "Vol Up" and allow the ROM to boot.
Click to expand...
Click to collapse
thanks mate, ive upgraded to a 6.5 build and im happy, just gotta do the partners HTC touch 3g now lol
Thans, its works with my HTC Diamond.
i have one question
Where i can get original ROM for HTC Diamond ?
so i can restore ROM to original state..
thank you
On the website of HTC
the easiest way
tanx dear i have upgraded mine-htc td
Thanks for this thread
so i did everything and i have a screen that says
diaming.nbh - ok
os - ok
update complete
update success
and the bar is full
what am i doing now?turn it off and on again or something else?
soft reset your phone by pressing the red button inside the stylus hole
or remove your battery
very useful and simple post,
ty for this.

F900 change lang to EN without errors (SD ROM+ EXT ROM)

This is the official WWE ROM 2.001.00 (modified by me to be acceptable from other regions/languages ).
You don't need to add cab's after flash or hard reset, because that file includes EXT ROM.
It is high recomented to flash phone with official languange before,because my file does not include radio part (when i 'll find time i will make a complete flash ).
You can find official ROM's here: ftp://ftp.acer-euro.com/smartphone/f900/os_images/
How to:
1.Format SD in "FAT" mode and put that file inside (extract from .rar )
2.Phone must be swithed off, pres at the same time ok + power on ( ok is the midle button in volume ).
3.Wait until finish.
http://www.mediafire.com/?hjwnmmgzz1f

P3300 Briek Urgent help plzzzzzzz :(

Dear All,
hi i was upgrading my p3300 rom its almost 90% done but my pc suddenly shutdown now my p3300 hang on startup screen i was try to flash with MMC but its also hang on tri-colours plz plzzzzzzzzzzz give me solution &
It also works ROM update mode (Three colors screen) but when I execute the Rom update frommy pc, it reaches 2/3% and gives different Errors depending the ROM
Faraz
1. Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it from your computer using a card reader, make sure to format in FAT32 and not FAT although in some cases format doesn't work, also it is only necessary to format if your first attempt at flashing fails
2. Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
3. Rename the .NBH file to ARTEIMG.nbh and copy it to the root folder of your microSD card.
4. With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Power & Record buttons and using the stylus at the same time to press the RESET button at the left side), keep both buttons pressed after releasing the reset button.
5. You should see the screen pictured on the left, confirm flashing on screen by pressing the volume slider down.
6. Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts. After the flashing process is complete, it will tell you to press any button to continue. After this the bootloader screen with its red/green/blue color is shown. Just reset the device and it will boot the new ROM.
SuperCID devices are able to flash any NBH image using this method.
Not working ??????? Its hang on tri-colours screen i was checked 5 hours
look up the original factory rom of your phone and flash it on your phone doing the normal way
i ill be very appreciated if u give me the link where i can find plzzzzzzzzz
N thx for reply
i ill be very appreciated if u give me the link where i can find plzzzzzzzzz
N thx for reply
link
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
good luck

Help on a MDA III

Hi, i'm trying to put a shady rom on my mda compact III, but i'm a new at this, I already downloaded the rom but now I dont now what to do, can anyone point me in the right direction or explain me step by step how it's done.
I hope someone can help me
I will assume you have an SDHC card and SD flashing is not an option
prepare for first flash:
- remove SD card and prefferably even SIM
- charge battery to at least 50%
- connect cable with ActiveSync (or WMDC), so that you can access files on your device
- make sure you use a reliable cable to prevent dropouts in midflash
get your ROM:
- download a ROM you want to try, if it's not official HTC, you NEED HardSPL before you continue
flashing HardSPL:
- find HardSPL ( get arteUSPL-nosize-cmon.zip somewhere around here, try google )
- HardSPL comes with no flashing program, you need to steal one from another ROM first!
- Unpack the ROM you chose in previous step and delete its .NBH file, place the RUU_Signed.nbh from HardSPL to the folder with blank flashing program
- make sure you are still synchronized and connected, you can alternatively switch to bootloader (hold rec until tricolor screen, press softreset)
- run the flashing process with CustomRUU.exe or similar (it has an icon)
flashing ROM:
- make sure the numbers on device start say SPL 1.11cmon otherwise try HardSPL bit again
- sync ActiveSync or use bootloader mode
- unpack the ROM you chose again OR just delete the HardSPL NBH file and place the original you deleted back
- run the EXE file and flash
- perform a hard-reset after the flash to prevent random problems (hold left+right softkey and press softreset)
-put your SIM and SD back
Have fun
I hope it's not too complex and I'm sure you can find better guides somewhere around here but this works. I think xD
Thanks...
You help me a lot.

Categories

Resources