Develop Bugs

is it bricked ?

i tried to do a beasty wm6 rom update, everything went well, and at the end of the procedure, it ask me to "press 0 to restaure factory setting" for rebooting, i press 0 and then....nothing. Impossible to start the htc, i can only access bootloader mode, but ain't no more recognize by the pc, i tried to plug it to AC power as i thought of a battery prob, and still nothing, no start, and no led telling me that it's recharging...
i ve done some search on the forum, but can't see something similar to this.
anyhelp welcome
regards

Hi,
did you try to downgrade it to WM5? I also had problems with WM6 and after a downgrade to WM5 it worked again.
Cheers
Michael

sorry wrong thread.

well now when i connect it to my pc it says unknown device, so i dunno how to reflash to wm5
im on vista 64, and when i try to install the 64 driver it gave me on error about a corrupted driver...

Hi
I have the same problem,cannot recognize the usb port.
Anyone has an idea??

try changing your cable and if possible try using a xp machine. i have heard of people having problems when flashing with vista (i did it and no problems)
If after you change the cable, and use a differente computer the universal when you put it in bootloader mode and the word SERIAL does not change to USB i would say its pretty much bricked but if you only flashed your device i would say it is still possible to bring it back from death.
try changing your cable (specially if its the one you usually use) im almost sure thats your problem.
also make sure you dont have the sd card or the sim in it that seems to help too.
best regards and best of luck
Erik

luxeomni said:
im on vista 64,
Click to expand...
Click to collapse
Thats your problem! Vista is very shaky at best with flashing via USB on HTC devices.
Reflash to WM5 using the SDCard method.
Psi

this worked for me
follow the directions on this thread it worked for me http://forum.xda-developers.com/showthread.php?t=291723

Again Problem with Bootloader...Help Needed :-((

Hello there,
i did try to upgrade my HTC Uni today....did not do this in a long time...but wanted to try a new image...well....somehow the upgrade did not work, and now i am Stuck in Bootloader...
.I have a G3 Unit with Bootloader 1.01,
when i plug the device in, there is USB on the screen....
on the PC i use Vista. Installed the drivers worked good before..
.when i plug in my HTC via USB in Devicemanger it is found as "Mobile Device-> Microsoft USB Sync"
I tried mtty.exe now, used USB but mtty always says "USB Port can not open" :-(
Any chance to get throu`?
I am sure its not broken, because i worked perfect before the upgrade....
Please guys...any help would be great! )
Maria

MariaKim said:
Hello there,
i did try to upgrade my HTC Uni today....did not do this in a long time...but wanted to try a new image...well....somehow the upgrade did not work, and now i am Stuck in Bootloader...
.I have a G3 Unit with Bootloader 1.01,
when i plug the device in, there is USB on the screen....
on the PC i use Vista. Installed the drivers worked good before..
.when i plug in my HTC via USB in Devicemanger it is found as "Mobile Device-> Microsoft USB Sync"
I tried mtty.exe now, used USB but mtty always says "USB Port can not open" :-(
Any chance to get throu`?
I am sure its not broken, because i worked perfect before the upgrade....
Please guys...any help would be great! )
Maria
Click to expand...
Click to collapse
I would try on an XP computer not in vista
In case you haven´t read please do: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Don´t forget to vote!

Yeah...i tried the Wiki before..no chance...but you are totally right...today i tried an XP PC and it worked a treat......hmm....guess Vista really sucks! :-(
Thankx for the help anyway!
Maria

MariaKim said:
Yeah...i tried the Wiki before..no chance...but you are totally right...today i tried an XP PC and it worked a treat......hmm....guess Vista really sucks! :-(
Thankx for the help anyway!
Maria
Click to expand...
Click to collapse
Yeah I always flash on XP even with my laptop using Vista.
Anyway if you want to flash on Vista read here:
http://forum.xda-developers.com/showthread.php?t=313001&highlight=flash+vista
A pleassure to help you Maria!

Hi, all

Hi, I am new on this forum and I hope somebody can help me.
I have an Qtek 9000.
Now, he is dead.
I hope somebody can help me. (Please!!!!!)
My qtek 9000 is jammed. He does nothing more.
Try to reset., failed.
bootloader mode tried. (start-up + light + reset) failed. Only what I see = USB (on the top) and V1.00 on the bottom
Everything, also tried connecting with the PC. failed.
Il has no connection with my PC.
What I must doing now?
Can somebody help me? Thanks

Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,

Thanks
Jevis

no connection with my PC
orb3000 said:
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Good luck,
Click to expand...
Click to collapse
Thanks for your advice, I have read it very carefully, but I don't get any response from my PC or device. I use Vista, is that perhaps a problem?
The device stay always on USB (on the top) and V1.00 (on the bottom)
Otherwise, when I started MTTY 1.24, it don't recognized USB, only COM 1, 2, 3.
My PC indicated USB connection, but not the device.
I can't quit the screen from the bootloader.
I am sure, I do something wrong. Please help me!!
Thanks

Vista is your problem, try it on Windows XP

to see USB on mtty, you need to uncheck the "allow USB connections" in activesync options

You can do it in Vista also
read here:
http://forum.xda-developers.com/showthread.php?t=313001&highlight=flashing+vista

THANKS EVERYBODY, IT WORKS !!!!!!
In the morning I have used the PC of my wife (XP) and it didn't work.
Now I have use the PC of my son, and it works!!(strange)
But by the MTTY I used COM1. It was flashing immediately.
I have not tried in vista. Maybe tomorrow.
Thanks for your help. Thanks, thanks.
Jer

Welcome to forum and you just learned a valuable knowledge... almost everyone at first have that problem.. I had same problem... and thanks to all the guyz here who share there knowledge and make this forum great
Enjoy you device...

other problem with my device
I will say it again, I am very pleased with your help,
Only, now I have an other problem. I will upgrade my device too http://www.qtek.nl/_BIN/UNI_DT_WWE_13077_176_10900_Ship.zip
Now it will crash again an is it back in the Bootloader mode.
I see on the top USB and on the bottom V1.00. What can I do?
Is it also possible to install Windows Mobile 6.1 on my device?
My device don't accept it.
Thanx

jevis said:
I will say it again, I am very pleased with your help,
Only, now I have an other problem. I will upgrade my device too http://www.qtek.nl/_BIN/UNI_DT_WWE_13077_176_10900_Ship.zip
Now it will crash again an is it back in the Bootloader mode.
I see on the top USB and on the bottom V1.00. What can I do?
Is it also possible to install Windows Mobile 6.1 on my device?
My device don't accept it.
Thanx
Click to expand...
Click to collapse
Try to use tomal's v8 or 9 both are great ... should not have any problem at all.... .. Try using XP it's easier...
Cheers
Rajiv

Problem with the usb connection

Hi,
I just bought a s620 that runs wm5, but when I try to connect it to my pcs with the usb cable nothing happens... as if the phone wasn't there at all.
I tried on 2 different computers with 2 different usb cables. The phone charges fine and connects on activesynch via bluetooth... I even tried to hard reset it but I had no luck
Is the phone faulty? Have you got any ideas on how to fix it?
Thanks a lot.

SpaceFlyer said:
Hi,
I just bought a s620 that runs wm5, but when I try to connect it to my pcs with the usb cable nothing happens... as if the phone wasn't there at all.
I tried on 2 different computers with 2 different usb cables. The phone charges fine and connects on activesynch via bluetooth... I even tried to hard reset it but I had no luck
Is the phone faulty? Have you got any ideas on how to fix it?
Thanks a lot.
Click to expand...
Click to collapse
You need to install ActiveSync into your PC before it can recognize your phone. Also try using a different USB cable.

I did that on both the computers I have

SpaceFlyer said:
I did that on both the computers I have
Click to expand...
Click to collapse
Try another usb cable. if the problem still exist the problem might cause from usb pin from phone.

Maybe its hardware and your miniusb port is damaged, you can find good and cheap deals in ebay.

I can't even flash it with a wm6 rom this way :/

SpaceFlyer said:
I can't even flash it with a wm6 rom this way :/
Click to expand...
Click to collapse
You can still flash your phone thorugh your sdcard

gmaniac2008 said:
You can still flash your phone thorugh your sdcard
Click to expand...
Click to collapse
I tried, but I keet getting the invalid certificate error on some roms and nothing happens on others instead :/

SpaceFlyer said:
I tried, but I keet getting the invalid certificate error on some roms and nothing happens on others instead :/
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=329605

u said that u connected via bluetooth, u said the phone charges when pluged....so i think your activesync its not configurated with a USB connection OR your phone isnt configurated to allow a USB connection to Activesync.
check activesync in the phone and in the PC to ALLOW USB CONECTION
se ya

flmhak said:
u said that u connected via bluetooth, u said the phone charges when pluged....so i think your activesync its not configurated with a USB connection OR your phone isnt configurated to allow a USB connection to Activesync.
check activesync in the phone and in the PC to ALLOW USB CONECTION
se ya
Click to expand...
Click to collapse
I have already another device that uses activesync via usb and that one works fine, I checked the settings btw.

gmaniac2008 said:
Try this: http://forum.xda-developers.com/showthread.php?t=329605
Click to expand...
Click to collapse
I followed the instructions on that thread, I get till the screen gets dark with the bt connection but then any ruu program obviously won't see the phone as it's not connected via usb. I even tried rebooting and getting in the manual bootloader after this but I kept getting the invalid certificate error, as if I didn't do anything at all.
Thanks for the help anyway.

SpaceFlyer said:
I followed the instructions on that thread, I get till the screen gets dark with the bt connection but then any ruu program obviously won't see the phone as it's not connected via usb. I even tried rebooting and getting in the manual bootloader after this but I kept getting the invalid certificate error, as if I didn't do anything at all.
Thanks for the help anyway.
Click to expand...
Click to collapse
You are running XP right on your computers and have access as administrator right? have you checked firewalls or antivirus settings that can be stopping the sync?? Reinstalling activesync?
Additionally, have you try on another computer with vista and WMDC?....I know vista is not as stable as XP, but I haven't had any issues so far with vista.

gmaniac2008 said:
You are running XP right on your computers and have access as administrator right? have you checked firewalls or antivirus settings that can be stopping the sync?? Reinstalling activesync?
Additionally, have you try on another computer with vista and WMDC?....I know vista is not as stable as XP, but I haven't had any issues so far with vista.
Click to expand...
Click to collapse
I tried on both xp and win7, my axim x30 is synching fine... so I don't think it's about settings.
The only option I have left at this point is the rom update I guess... if only it accepted the wm6 ones :/
Thanks.

HELP PLS! USB Driver for HTC Dash S620

Good day!
I hope someone could help me!
I purchased an HTC Dash over Ebay. I only have the phone unit and the charger.
The first time i plugged/sync it using a USB cable on my laptop this shows up "USB not recognized"... I think I need to download the USB driver for the HTC Dash.
But the unit is charging its battery when plugged to the laptop.
Please help.

hannahgiray said:
Good day!
I hope someone could help me!
I purchased an HTC Dash over Ebay. I only have the phone unit and the charger.
The first time i plugged/sync it using a USB cable on my laptop this shows up "USB not recognized"... I think I need to download the USB driver for the HTC Dash.
But the unit is charging its battery when plugged to the laptop.
Please help.
Click to expand...
Click to collapse
Do you have administrator access to your laptop? If that is the case, try to boot your PC and see what happens.

? boot
how do i boot my computer?

This may seem like a dumb question, but...!
Do you have ActiveSync installed on your computer?

activesync
exciseman said:
This may seem like a dumb question, but...!
Do you have ActiveSync installed on your computer?
Click to expand...
Click to collapse
yes. i have it already. but the problem is the PC is not reading the phone. it keeps on saying 'USB not recognized'

hannahgiray said:
how do i boot my computer?
Click to expand...
Click to collapse
Restart?...what OS are you running in your PC?

hannahgiray said:
yes. i have it already. but the problem is the PC is not reading the phone. it keeps on saying 'USB not recognized'
Click to expand...
Click to collapse
Do you have enabled in your activesync "allow usb connection" selected
That's on connection settings..

yes
Mr. Clown said:
Do you have enabled in your activesync "allow usb connection" selected
That's on connection settings..
Click to expand...
Click to collapse
yes. already enabled it. do i need the USB driver for HTC Dash? or can this be solved by other means?

hannahgiray said:
yes. already enabled it. do i need the USB driver for HTC Dash? or can this be solved by other means?
Click to expand...
Click to collapse
Do you know which rom are U running on your mobile?. You can try a hard reset though or flash a stock rom to load all "factory" things in your dash.

Can also try reinstall active sync/wmdc also another usb lead.