My vzw was ok before today on my network via wifi and now it only connects if there are no cables connected to my dlink dir-655 router. It says it can't connect try another access point. Never had an issue before. I have reset to factory defaults both router and phone more then once and still not working. If I turn on router with no cables connected to it then the tp2 connects fine. This meaning no LAN cable and no modem connected either. No security enabled for wifi either in the router. I have enabled security on router and phone says incorrect pass code which is incorrect as I am entering the correct password. Everything else on my network both wired and wifi work fine. Only the tp2 has a problem.
I am running default rom too. It is unlocked though and I've never put a rom or anything on the phone.
I don't have a clue what is wrong. I will be so grateful for any help.
Thanks so much.
Anyone???????????
Related
HEEEEEELLLLPPP!
I have managed to connect to my wireless router at home via my MDA3 but whenever I open IE and try and surf it responds by telling me that the page isnt available. ie. it cannot surf the net!
As soon as I put the MDA3 into the cradle it works fine. I know these are two different ways of connecting to a network but how do you surf the net via WiFi to your home wireless network?
Hello meatychi,
Try connecting the MDA3 as the only device on the router. You may have to switch off other devices first and reboot the router.
I have this problem too, and i can NOT use my pda2k and the Fujitsu laptop at the same time on the wireless router. It will work if the laptop is hooked up via cable and the pda2k is on wireless, but never together.
I returned the router to the shop and we tested it there. It all worked as it should with their wireless equipment, which leads me to believe that the wireless components in my Fujitsu laptop interfere somehow.
Let me know how you go.
Regards,
Atze.
Interesting!
The only other device I have on wireless is my mac and that wasnt on when trying to get the MDA to work.
Did you use a static IP or DHCP?
Could you give a little more detail into the way you setup your PDA to communicate with your wireless router?
Initially I used DHCP, when that didn't work I switched to static IPs
which didn't help either. I even throttled the router back to 802.11b, as I thought that the two different protocols may be in a tangle, but... you guessed it. No luck.
After all this I reverted back to DHCP and switched the router back to 802.11b+802.11g. The laptop is back on a cable
Everytime I try something with both devices hooked wireless I have to restart the router, as it will no longer work with either device.
I have set up the pda2k as follows:
Connect to Work network,
Using WPA-PSK authentication
TKIP Data Encryption
It is set to access All Available networks,
Automatically connect to non-preferred networks
Use server-assigned IP address
Leave DNSs and WINSs blank
Performance is usually set to Best Battery, but I vary that when I go downstairs. (doesn't appear to improve the range thoug I think it's pretty poor.)
Auto turn of WLAN if not connected is ticked to kick in after 2 minutes.
Regards,
Atze.
Thanks for the info I will try again tonight!
i'LL LET YOU KNOW HOW i GET ON!
Ok here is a good one for you.
I have wifi at home, when I got my omnia 7, linked it up and all worked fine. Then last week it stopped working, I cannot even connect, it comes up incorrect password when it isnt.. Dont know why...
Tried - tested:
1) Phone will connect to other wifis fine
2) Reset router, password, security everything
3) swapped router
4) My pc can connect to the router fine over wireless.
5) Tried connecting from 2m away, nowt.
Only thing I aint done is factory reset the phone, which I wouldnt want to do unless last resort.
Any tips.
see here maybe:
http://social.answers.microsoft.com...7/thread/e78b08e8-9851-4960-9515-dc506f61454d
http://social.answers.microsoft.com...7/thread/bb20377a-317b-4b9d-9966-be6dd039adf2
Only one thing looks interesting and that is aes and but the router i have sky broadband does not have this option and I connect to my mates sky broadband router (netgear) fine.?????
I had problems connecting to DD-WRT flashed netgear routers.. Seems the WRTG54g2 v1 + have pretty shady chipsets. Flashed back to oem firmware and works like a charm, just lose some of my dd-wrt features
what router are you using? I know my DIR-628 did not like my LG KM900 arena no matter if it was connected to the WAP in the basement or directly to the router
I've done some searching, googling and posting but wanted to see if this is my isolated defective Note2 or other people have this problem.
I am on a rooted Note2 using the Toolkit after getting my phone yesterday
I cannot connect to a hidden SSID with a netgeare router.
The phone connects fine but when I turn off the SSID broadcast it says "not in range" right before my eyes.
Just wondering if anyone else with a Sprint phone has this issue. I've seen it mention with a few other android models but not here yet.
Normally that's an issue with your device not being compatible with the router.
In your case, this doesn't hold true. You probably need to manually enter your SSID and passphrase with your router not broadcasting. It's just a quirk that happens sometimes when you setup WiFi and shut off broadcasting.
Thanks for the quick reply.
I messed around with Sprint Optimization and Wifi Locations settings while trying to get Wireless Tethering to work and tried connecting again.
It seems to work now.
Thanks:good:
Hi all,
Lost info for my original account, so I made a new one.
Straight out of the box my HTC One has not been able to connect to my router. It gives me the message that it's avoiding a poor internet connection although under the connections it says the signal strength is excellent. My laptop connects just fine. My Razr HD connects just fine, but interestingly my wife's galaxy S3 will not connect either. It gives her the same message.
I've tried changing the bandwidth from auto to 2.4 to 5. I've tried forgetting the network. I've tried static internet connection with IP address 192.168.0.15 and also 10.0.0.11 I enabled the DLNA, there is no useable option to clear cache or clear data and last of all I did a factory reset.
None of these worked. DLNA and the static internet connection have allowed me to connect, but it's not really connected. I'm not sure what's happening. It says connected with excellent signal strength, but nothing connects. No internet, no netflix, no nothing.
I think it might be something to do with the router itself, but I don't think I'll be able to get any information from netgear's people. It's not broken (other devices connect just fine) but these newer smartphones seem to have a problem with it.
Neatgear N300. Also, I tried WPS connection as well. No Dice.
Thanks
Update-I've found a -similar- issue in this forum regarding specific bandwidth connectivity issues for dual band routers. One of the suggestions was to update the firmware. I haven't been able to do this successfully. Still trying.
Update 2-Tried to connect to Safeway WiFi today. No luck. It goes to the sign in page and it's just blank. At home it says the page is unavailable. At safeway it's just blank...
*bump* No help at all?
*bump*
Picked up a new AT&T G3 yesterday. Had no problem getting on my wifi at home. However, I've been unable to get the phone to connect to my work wifi. The phone detects the network, I put in my password, but it just will not connect. I've still got my Galaxy S4, and that phone connects fine. I confirmed that both phones have the same settings, and the G3 will not connect.
I've reset the phone, powered it off and back on, forgot the network and reentered the password, turned wifi of and back on, and still no love.
Any other suggestions before I return the phone?
Restart router? Login to the router and check logs? Wipe router password (no password) then try to connect.
Trying to get that accomplished will be fun. Might just return and stick with my S4.
Mines had the same issue out the box, wouldn't connect to neither mine nor the neighbors WiFi, restarted my router and all has been good...
By restarting the router, do you just mean unplugging it for a minute or two, then plugging it back in? Tried that with the router in issue with and it still won't connect.
I'm having this issue with the wifi networks I have at home. I'll go to the settings, enter my password and it will instantly not connect. However, the NFC tags I have already set up before I had my G3 still work and allow me to connect without issue. Strange. This is on the 16GB D855
funkeruski said:
By restarting the router, do you just mean unplugging it for a minute or two, then plugging it back in? Tried that with the router in issue with and it still won't connect.
Click to expand...
Click to collapse
Yes. But if router is setup as access point then will be connected to the switch and or firewall. Worth to restart it as well. I recently had this issue with airport express. One way to fix it was change router open(no password) than cannect your phone and then stick the password back.
Just to follow up on this, I was able to gain access to and play with my router settings at work. I changed the network to open without any security, and the phone still would not connect. I then changed the network mode from "b & g mixed mode" to "b only mode" and it immediately connected. Not sure what the difference is, but hopefully our computer guy will let me keep the change.