[Q] Wi Fi Connectivity - Verizon HTC One (M7)

Hi all,
Lost info for my original account, so I made a new one.
Straight out of the box my HTC One has not been able to connect to my router. It gives me the message that it's avoiding a poor internet connection although under the connections it says the signal strength is excellent. My laptop connects just fine. My Razr HD connects just fine, but interestingly my wife's galaxy S3 will not connect either. It gives her the same message.
I've tried changing the bandwidth from auto to 2.4 to 5. I've tried forgetting the network. I've tried static internet connection with IP address 192.168.0.15 and also 10.0.0.11 I enabled the DLNA, there is no useable option to clear cache or clear data and last of all I did a factory reset.
None of these worked. DLNA and the static internet connection have allowed me to connect, but it's not really connected. I'm not sure what's happening. It says connected with excellent signal strength, but nothing connects. No internet, no netflix, no nothing.
I think it might be something to do with the router itself, but I don't think I'll be able to get any information from netgear's people. It's not broken (other devices connect just fine) but these newer smartphones seem to have a problem with it.
Neatgear N300. Also, I tried WPS connection as well. No Dice.
Thanks
Update-I've found a -similar- issue in this forum regarding specific bandwidth connectivity issues for dual band routers. One of the suggestions was to update the firmware. I haven't been able to do this successfully. Still trying.
Update 2-Tried to connect to Safeway WiFi today. No luck. It goes to the sign in page and it's just blank. At home it says the page is unavailable. At safeway it's just blank...
*bump* No help at all?

*bump*

Related

XDA IIs Wifi and lockups

Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
I have no problem at all with Netgear router. Try changing the connection speed setting in the router to the "b" mode only. Hopefully this can solve your problem.
No problems here either I'm afraid. I'm using a Draytek Vigor 2600VG at home and at work there are two of us with XDA IIs using a Linksys BEFDSR41W wireless router and no problems there either.
Sorry! :-(
Try a hard reset (gulp!) and see if you still have problems (Without anything else installed that might be inteferring) otherwise might be a faulty unit perhaps.
--Neil
I second what xanth said, I had the problem where wifi would not turn on, so I hard reset and installed each software back individually the problem was Calligrapher 7.3 did not like being in Storage or Storage Card only in Main memory (go figure)
efjay said:
Does anyone have a problem with their wifi locking up their xda iis? I have bought a linksys router and am getting frequent lockups when using wifi. I am using the shipped O2 rom, thanks
Click to expand...
Click to collapse
I use the XDA IIs on a variety of wireless networks and experience problems with an alarming regularity. The most annoying is the fact that the top bar seems to loose functionality, when using wireless!!
I will actually add that I do seem to have problem with the "range" of WiFi.
I need to do more testing, but it doesn't seem to be more than 20m or so before have communication issues/timing out :-( Will have to find out what our walls are made of!!!
I have problems connecting sometimes. I regularly use three routers, Draytek, Buffalo and Belkin. The only time that it locks up is when using skype. The skype problem is a known issue with no cure.
Nigel
I am having a problem where my Siemens SX66 will loose connection to my Microsoft MN700 wireless AP on occasion. -It simply appears as if the Wifi radio shuts itself off.
Weird.....
Wifi has never worked for me. It simply doesn't work in the way nature intended.
The main problem (as far as I can tell) seems to be that it cannot get DNS or IP configuration settings from my router (Belkin 7630) automatically.
It can connect to my wireless network without any hassle, but that's about it. If I enter DNS and IP settings manually it works fine. But this is unworkable if you want to connect to another wireless network.
If I can't sort this out by next week I'm going to sell the unit on eBay. It's been nothing but a pain since I mistakenly bought it in December.
Wifi is a nightmare on this device! I'm going back to Nokia.
I am going to do a hard reset and test to see if i still get any freezes. Anyone know of any software i can use to backup my text messages?
WiFi
Hi guys,
Haven't had too many issues with WiFi over here - standard O2 Asia ROM (with the BT 3500 update).
I'm running a Netgear WG602 @ home with 64bit WEP and a Dlink AP2100 @ work with WPA-PSK. No connectivity problems at either location, both DHCP. It does however take a few minutes to connect, but this is on the odd occasion.
The only frustrating thing with the WiFi is that I have to soft-reset often to turn Wi-Fi on - any ideas? Hopefully O2 will fix this in the next ROM. Other than that, I've had the Nokia 9500, P900/800 and this is by far the best device for the power user.
Just me 2c!
Cheers
cK
Wifi is on all the time on my device, sometimes when I switch the device on while within range of an AP it does not connect. Often switching wifi off and then onn again causes it to connect. If this does not work then I can often go into the network dialogue section, and see the network marked as 'availble' but not connected (why it sometimes does not auto connect I dont know). Tapping connect usually cures. If that does not work then I too need to soft reset.
I hope like you that they fix this cause its damned anoying. I will be interested to see what the Benq P50 is like when its released. I shall get one from expansys to test and ship it back within the 7 days.
Nigel
As for those having problems with specific access points. It is not nessesarily the fault of the blue angel. It seems to me that none of the manufacturers of wireless kit understand the term 'standard' they all seem to have their own take on it, which is why kit from different manufacturers refuses to talk to each other. I am of the opinion that they do it in purpose to lock you into using their client cards with their AP's !!
Try it with some non Belkin kit and see what happens.
Nigel
Well i tried a hard reset and didnt install any apps and tried connecting to wifi again and still got a lockup and loss of connectivity. Im going to swap the router for another make and see what happens
Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.
Swapped my linksys router for a D-Link and so far no problems after 2 days. so looks like my problem was my router.
XDA IIi and wifi
I just bought one of these and can't get it connected. I have a netgear wg602 access point. When I finally figured out how to set the IP manually (the 02 xda tech support said it can't be done - maybe they're right ;-)
I now have it saying it's connected, with right IP address. My DNS and gateway are set up for the wireless adapter in network adapters. The signal is average. The XDA says wifi is connected. The access point even says it's authenticated and associated - same as my other stations.
Only problem is, internet explorer doesn't find any web pages - says "The page you are looking for cannot be found" (works fine through GPRS)
Also, terminal services times out trying to connect to an internal IP address (to eliminate DNS as a problem)
So, anyone know how I troubleshoot network problems - it looks like a TCP/IP issue? Can't find ping or arp etc. I've also tried an IP address that I know works on the network.
thanks for any help
Dave
Hi
For ping, ipconfig and stuff, head to http://www.cam.com/windowsce.html
I have had multiple issues trying to get wifi working reliably. It still fails now, but there are a few tricks to get it working again. Most of my wifi issues have been due to regular use of three AP's [email protected] and [email protected] along with GPRS and VPN.
To start with I suggest setting all the ****e in connections (internet and home network to 'My ISP' then goto your wifi setup, network adapters, and tell it that the wireless card connects to the internet. Now, tap ok, and goto tools, network cards, tap the active connection (it must already be connected) and ensure that its set to internet.
Next soft reset the thing, and wait for it to connect to yr wifi. Now, use the ipconfig tool and ping tool from the above site to check that all is OK. Check that its got the default gateway right and a sensible LAN IP.
I have found on occasion that I can be connected via wifi, but that the device is still trying to talk using an old IP allocated by gprs which means nothing to my lan! IPconfig will show if all is OK.
Whoever wrote the whole of the networking system (and its terrible gui's) on windows mobile wants shooting. I usually have 2 VPN profiles setup under my work network. If I leave it set to that, and use wifi from my lan to connect to the internet all is fine. However if I try and access a local server, the damned thing starts trying to connect a vpn (it aint inteligent enough to work out that the IP I asked it to connect to is local).
I have been trying to find a setting for all this networking rubbish that allows me to do *everything* without reconfiguring each time - to no avail.
Another thing to note is that you cant send/receive MMS messages while wifi is connected (more stupidity), it tries to connect to the MMS server using the wifi connection, and the telco blocks it cause it wants to charge you for sending MMS over GPRS. Only solution is to disconnect wifi, send MMS then reconnect wifi!!!
Nigel
No problems with WiFi for me
Hmm I'm using an O2 Asia Rom as well.. and my wifi manager seems to automatically create "settings" for each AP it detects and I seem to have no problems connecting at all... been using WiFi around my house since the first day i got it..
i am using a Linksys Wireless 802.11b router..
btw I am new here.. finally able to register!
How's everybody doing?
Cannot turn off IEEE 802.1x
Has anyone had problems unchecking the 'IEEE 802.1x netwrok access control' checkbox???
I uncheck it, but then when I go back to the screen (click on the connection | then select 802.1x tab at the bottom) it has checked itself again!
The XDA IIs does not save the setting - it just keeps re checking itself 02 help have been no use - they sent me an instruction manual and it even says in one of the step 'uncheck IEEE check box'
Im am using a netgear wirelesss router and have also tried on a d-link
Sugestions - is anyone else having this problem??

TouchPro Wifi loses connection :-(

Hi friends,
I have a terrible problem with my fine TouchPro2.
It constantly loses the wifi-connection. My old TouchPro1 never had these issues.
I have the actual HTC stockROM installed. Tried WiFiMonster - but again. After a few seconds it loses the connection.
Sometimes I'm able to download three, four mails, but then it breaks again :-(
Any idea?
re
To be more specific: WiFi goes off after 30 sec. or so. :-(
does wifi turn off? or simply disconnect? if it's disconnecting, first thing i'd do is reboot my router with wifi enabled on the phone and see if the connection improves. if wifi is physically turning off i'd guess it's an issue in the rom. maybe try another rom? and make sure wifi is set to "best performance" on phone.
Is this everywhere or on a specific router?
Does your connection drop after a certain activity (e.g. screen going into standby, opening a specific program, etc.)? Also, have you tried to backup your device and perform a hard reset?
Similar Problems
I've been having similar problems for about two weeks now.
I have tried several things like hard reset, soft reset, changing the rom, playing with the wireless connection and just about everything in the connection folder but no.
I my case, when I turn the wifi connection on through the comm. manager, it slows down the phone while its trying to connect and then it just goes off, leaving me with t-mo data connection. However, when I turn off data connections in comm. manager, it connects to the router and stays connected but it does nothing with the connection. Meaning, I am connected to the router, but somehow I won't be able to use the connections.
If anyone have any suggestion(s), I would greatly appreciated it.
solved...
Thx guys,
I performed a Hardreset and testet one by one the installed software... and found it: I installed a CommManager and it caused the WiFi-Problem :-(
thx
biddle said:
I my case, when I turn the wifi connection on through the comm. manager, it slows down the phone while its trying to connect and then it just goes off, leaving me with t-mo data connection.
Click to expand...
Click to collapse
What do you mean "slows down the phone"?
biddle said:
However, when I turn off data connections in comm. manager, it connects to the router and stays connected but it does nothing with the connection. Meaning, I am connected to the router, but somehow I won't be able to use the connections.
Click to expand...
Click to collapse
If your wifi connects but you cant get out, check to make sure you don't have the proxy box checked in connection settings. I have seen this box mysteriously become checked in the past.
Just a little comment
I will be getting TP2 very soon, but speaking of WiFi problems in general..
I had 3 phone: TyTN II, Samsung Omnia & iPhone 3g. only the TyTN could connect to WiFi at home while the other two can connect but will not get any data... however, they worked flawlessly in numerous other locations...
the problem was with my linksys router
apparently some older routers not compatible with the newer devices...
just wanted to share
Ok. As of today, it seems to be working, thanks for the help. However, I think it might have been my router. I think it had something to do with overheating because I put my modem on top of it. But the funny part was, everything, with the exception of my phone, was connecting. However, the connection was never really strong or reliable.
Anywho, thanks for the suggestion, even though it didnt really help me, I appreciate the gesture.

[Q] More Wifi questions...

I have a N7100 and I am also having wifi connectivity issues
I read the old wifi connectivity thread but my issue doesn't seem to be the same.
.I have a broadband wifi router which I also use an iPad, win Xp laptop, HTC Wildfire S and Motorola defy through, all of which have been fine (using WEP encryption)
)Unfortunately the note II seems to connect but then doesn't access the Internet.
The phone's wifi page shows connection. It connects then receives and IP address but then the alert comes up that there is no Internet access. I also use fing which says that there is no wifi network.
I''ve downloaded the apps wifi manager and wifi analyser to try and get to the bottom of it but they both say I have good signal strength and are connected.
Wifi analyser showed there was a bit of crossover from another AP router next door so I changed the channel to give clear air between us. I then reconnected all the devices and they all work -apart from my new Note.
My question so are 1)is there any more i can do to fix it. 2)where should I look to find the logs which might let me diagnose it a bit better . I should add that sometimes it just works and can browse and download as normal, but most of the time it doesn't.
I started to have trouble connecting to wifis few days ago, it says that signal is very strong i even see full bars and it stops on "containing IP adress" and then shows up window that signal is poor and doesnt connect, but wifi is working my friend next to me was connected, its in a bar and like 2 weeks ago i was able to connect to that very same wifi, very disappointing, no clue what could be wrong

[D855] WiFi unavailable

Hey I got some problems with the WiFi connection, it connects but it says internet not available, although the wifi network is working in other devices. I tried doing a full wipe or flashing a kdz, but still have the same problem. Have u got any ideas to resolve this? Thanks
I'm having the same problem. I don't know if it's like this for the OP, but the hardware itself seems to work. It detects connections just fine, I can install wifi analyzer and it displays and measures all nearby connections no problem. However, when I try to connect to wifi, it says "saved. secured." It won't tether either. I've tried with multiple modems and routers, it just won't connect.

wifi issues

Since I've purchased the note 10 +, I've had some wifi connection issues. The phone never stays connected, or will drop wifi frequently. Normally once a day. Now though, it is much more common, and it is for longer periods of time. I'll be casting something to my tv, and then the video will drop due to the phone trying to "reconnect" to the wifi. Has anyone else seen similar issues?
No issues here with WiFi. Do you have any other devices that exhibit this issue? What have you tried so far in terms of troubleshooting?
I've tried resetting the router, and doing a factory reset on the device. Also, I've tried it on another wifi network and it does it there as well. No other devices that I have on my wifi exhibit the same behaviour. I was hoping with a software update it would get better but it is getting worse.
Do you have a case on your phone?
Any settings made in advanced wifi settings?
Tried app like wifi analizer? Both to check the received wifi strength and also possible wifi congestion...
Are the problems only while casting to TV or also when streaming of Internet?
Did you try change in wifi settings in router, like extended lease time or assigning fixed ip-adresses to both TV and phone, change of wifi channel, switch between 2.4GHz and 5GHz?
OnnoJ said:
Do you have a case on your phone?
Any settings made in advanced wifi settings?
Tried app like wifi analizer? Both to check the received wifi strength and also possible wifi congestion...
Are the problems only while casting to TV or also when streaming of Internet?
Did you try change in wifi settings in router, like extended lease time or assigning fixed ip-adresses to both TV and phone, change of wifi channel, switch between 2.4GHz and 5GHz?
Click to expand...
Click to collapse
The wifi network is fine. Both in signal and congestion. The phone is set to be on the 5 ghz. And I've never had any issues with it on any other device. I lose signal frequently. I only used the casting example to help people understand what's happening.
Now there is a problem with many routers. Even expensive models may not solve the problem with an Internet connection. I also had problems connecting to wi-fi. The phone was disconnected from the router once every few days. I called the guys who connected the Internet to me, but they said that everything was fine on their part. They sent me a master, he looked, but could not do anything except how to change my router. A few days later, I realized that the problem was not solved and started Googling the problem on the Internet. I came across a forum where they advised me to enter this ip 192.168.1.1 and after a couple of manipulations, I was able to fix my problem.
larazimmer said:
Now there is a problem with many routers. Even expensive models may not solve the problem with an Internet connection. I also had problems connecting to wi-fi. The phone was disconnected from the router once every few days. I called the guys who connected the Internet to me, but they said that everything was fine on their part. They sent me a master, he looked, but could not do anything except how to change my router. A few days later, I realized that the problem was not solved and started Googling the problem on the Internet. I came across a forum where they advised me to enter this ip 192.168.1.1 and after a couple of manipulations, I was able to fix my problem.
Click to expand...
Click to collapse
Are you just talking about the programming page of Netgear's routers? Netgear also has apps for that...
larazimmer said:
Now there is a problem with many routers. Even expensive models may not solve the problem with an Internet connection. I also had problems connecting to wi-fi. The phone was disconnected from the router once every few days. I called the guys who connected the Internet to me, but they said that everything was fine on their part. They sent me a master, he looked, but could not do anything except how to change my router. A few days later, I realized that the problem was not solved and started Googling the problem on the Internet. I came across a forum where they advised me to enter this ip 192.168.1.1 and after a couple of manipulations, I was able to fix my problem.
Click to expand...
Click to collapse
How did entering your router's default IP address fix your issue? What changes did you make to your router's configuration?
Just saying that you entered that IP address and making a couple of manipulations doesn't help the OP.

Categories

Resources