Related
MOD EDIT: Can you help, I flashed my GSM diamond with the CDMA hard SPL from PPCGeeks: http://forum.ppcgeeks.com/showthread.php?t=36062
i try to unlock my htc diamond using solution
Code:
FIRST AND MOST INPORTANT!!!
U guys MUST have HardSPL INSTALLED on ur phones BEFORE trying anything of this out...
I Suggest u use HArdSPL 1.40 Unsigned (Its in the RAR file)
AFTER u have installed HardSPL 1.40 Unsigned
Unrar and go to step 2 folder and run -> DiamonCustomRUU.exe
Just do what it says and update.
After the phone restart copy DiamUnlock.exe from the step3 folder on to your diamond
(Anywhere) and run it.
The DiamUnlock.exe closes itself very fast, i have sucessfully made it by first launching the
program and quickly and several times press up button and touch the screen
if you'r lucky the screen stay and you can sim-unlock your diamond!!
the problem that phone came in step 2 after 100% write , it show error 262
any solution thx
Please post in the thread where you got it from!
You'll get an answer, and there will be fewer threads lying around here!
i don't understand what do u mean by this ?
now i use solution from
http://forum.ppcgeeks.com/showthread.php?t=36062
after write rom my htc is totaly dead can't power on
any solution to recover it
hbstun said:
i try to unlock my htc diamond using solution
Code:
FIRST AND MOST INPORTANT!!!
U guys MUST have HardSPL INSTALLED on ur phones BEFORE trying anything of this out...
I Suggest u use HArdSPL 1.40 Unsigned (Its in the RAR file)
AFTER u have installed HardSPL 1.40 Unsigned
Unrar and go to step 2 folder and run -> DiamonCustomRUU.exe
Just do what it says and update.
After the phone restart copy DiamUnlock.exe from the step3 folder on to your diamond
(Anywhere) and run it.
The DiamUnlock.exe closes itself very fast, i have sucessfully made it by first launching the
program and quickly and several times press up button and touch the screen
if you'r lucky the screen stay and you can sim-unlock your diamond!!
the problem that phone came in step 2 after 100% write , it show error 262
any solution thx
Click to expand...
Click to collapse
He means you should ask in the thread where you found this information above.
Code:
First and foremost...
ah ! ok
i don't remember when i found it
but now my htc is totaly dead , how i can recover it ?
hbstun said:
ah ! ok
i don't remember when i found it
but now my htc is totaly dead , how i can recover it ?
Click to expand...
Click to collapse
I am not sure you can.
Does it go into bootloader mode? If not, might be JTAG is your only option.
When you say 'totally dead' do you mean you get absolutely nothing when you try plugging in the usb cable ?
Logically as soon as you plug in the cable it'll power on into the tri-colour screen.
It'll do this even if you remove the battery.
aE3-ink said:
When you say 'totally dead' do you mean you get absolutely nothing when you try plugging in the usb cable ?
Logically as soon as you plug in the cable it'll power on into the tri-colour screen.
It'll do this even if you remove the battery.
Click to expand...
Click to collapse
nothing hen i put usb cable nothing in the screen
Kevbodian said:
I am not sure you can.
Does it go into bootloader mode? If not, might be JTAG is your only option.
Click to expand...
Click to collapse
what do u mean by jtag and how i can do it ?
<mod mode>
Please stop spamming the forum with requests for Help and I have updated the title of this post so that it may get more attention.
</mod mode>
JTagging can be done using QMAT, if need be.
Before that, can you put your Diamond into the Bootloader or not ??
Thanks
Dave
Serves you right for using a leaked unlocker program - Should have gone here . thanks to Olipro as the leaked version was buggy.
I do hope you get this fixed though. (I would help if I could really).
DaveShaw said:
<mod mode>
Please stop spamming the forum with requests for Help and I have updated the title of this post so that it may get more attention.
</mod mode>
JTagging can be done using QMAT, if need be.
Before that, can you put your Diamond into the Bootloader or not ??
Thanks
Dave
Click to expand...
Click to collapse
can't enter bootloader ?
hbstun said:
can't enter bootloader ?
Click to expand...
Click to collapse
In that case I suggest you PM ViperBJK and as him nicely to look at the thread...
He's the main man on JTAG'ing.
Thanks
Dave
DaveShaw said:
In that case I suggest you PM ViperBJK and as him nicely to look at the thread...
He's the main man on JTAG'ing.
Thanks
Dave
Click to expand...
Click to collapse
ok thx anyway for your help
R3PUBL1K said:
Serves you right for using a leaked unlocker program - no sympathy or help from me.
Should have gone here thanks to Olipro as the leaked version was buggy
Click to expand...
Click to collapse
I think he tried the unlock before he flashed the cdma hardspl.
Kevbodian said:
I think he tried the unlock before he flashed the cdma hardspl.
Click to expand...
Click to collapse
yes i tried unlock but failed
i found rom in some website and i flashed it to my phone
but now it dead
You must eter in "USB Trigger Mode"
hbstun said:
yes i tried unlock but failed
i found rom in some website and i flashed it to my phone
but now it dead
Click to expand...
Click to collapse
I think I can help you ...
Just this **** happened to me too ... because I did not read carefully ROM-destination, but we resolved the issue after a couple, three hours of bloody despair ...
Be sure before you get to work, you already have prepared a full ROM image (....nbh) for your Diamond, that is to contain radio too. If you do not have a full version, download a full version first and make sure that contains both ROM and Radio.
1. Take cover behind the phone
2. USB link cable to the computer and phone
3. Open the phone
4. Enter bootloader mode as follows:
Keep the volume down key and click with the stylus reset button (red button which is located behind the device ) for 3-4 seconds in the same time with the volume down key, then you can get out your stylus, and continued to keep volume down key, until the bootloades screen appears, now you can release the volume key down too.
And now, just simply launch DiamonCustomRUU.exe to start your flash, using a file manager, and is ready ... you have a new phone!
I hope I was helpful ...
kokocf said:
I think I can help you ...
Just this **** happened to me too ... because I did not read carefully ROM-destination, but we resolved the issue after a couple, three hours of bloody despair ...
Be sure before you get to work, you already have prepared a full ROM image (....nbh) for your Diamond, that is to contain radio too. If you do not have a full version, download a full version first and make sure that contains both ROM and Radio.
1. Take cover behind the phone
2. USB link cable to the computer and phone
3. Open the phone
4. Enter bootloader mode as follows:
Keep the volume down key and click with the stylus reset button (red button which is located behind the device ) for 3-4 seconds in the same time with the volume down key, then you can get out your stylus, and continued to keep volume down key, until the bootloades screen appears, now you can release the volume key down too.
And now, just simply launch DiamonCustomRUU.exe to start your flash, using a file manager, and is ready ... you have a new phone!
I hope I was helpful ...
Click to expand...
Click to collapse
can't enter bootloader like u sad !
hbstun said:
can't enter bootloader like u sad !
Click to expand...
Click to collapse
Hello there! Where have you blocked, exactly ...?
Hi every one
after i update my diamond with Calkulin's Touch Pro 23009 Rhodium ROM (v2 7-22)
i got a problem which is hang since i start my diamond.
Vibrates and hang in Boot-Screen (i dream different & nothing else writer) i have wait more than 1 hour , i did hard rest no use and i can't connect to pc using USB cable
i hope every things it's clear
and i hope you got a solution for me and other which thy are suffer like me
Try to change the rom . Pull out the stylus , Press the reset button and hold the VOLUME DOWN and the right down button . After connect to pc
man thank you for your reply
i did what you told me hold the VOLUME DOWN and reset button and then i connect to pc (it start connecting ) then i change the rom
it work fine 100%
thank you agen and i hope others will be clear with them and useful
anymero said:
it work fine 100%
Click to expand...
Click to collapse
That's good! But don't flash Touch Pro ROM's again, ok?
If you have a GSM Diamond, only flash GSM Diamond ROM's!
And if you have a CDMA Diamond, only flash CDMA Diamond ROM's!
Yes sure
I am not ganna try anthing else that was By mistake
hello this is my first post in this forum and I hope you accept me as friends on this section of HTC Touch Diamond
.. I have a HTC Touch Diamond P3700 ( new) and since yesterday he cannot be Started on .. and I tried several solutions (reset ....) but no result
Could you provide me a solution Please
My Greetings
Aziz
Nice use of font colors. Unfortunately the same cant be said for your phone. Whats your location and from which (country) did you buy your touch diamond from
Just be patient and listen ayyu3m to explain you and he will help you 100%.I have more worst problem than u have
sorry i was not here for yesterday
im from morocco
and the fone is from : SFR France original and made in taiwan
thanks a lot my friends
i wait your repley
regards​
newlead said:
sorry i was not here for yesterday
im from morocco
and the fone is from : SFR France original and made in taiwan
thanks a lot my friends
i wait your repley
regards​
Click to expand...
Click to collapse
Okay. So what exactly did you do or what exactly happened to your phone?
man did ya try to charge it? maybe the bettray is dead and can ya load the boot screen u know just press the down volume button and reset see if u can see the three colors screen if its then dont worry ... worst thing is just re-flash the rom PM me for extra help buddy
I have the same problem with my phone after i tried to update rom.
I flashed hardspl 1.40.OliNex and then Diamond_Radio_1.00.25.07 ...everything ok until i tried ruu_diamond_orange_ro_1.37.70.1_radio_signed_diamond_52.33a.25.17_1.00.25.08_ship.
Now it only shows an image with orange and
r: 1.12.25.19
g: 52.60.25.33U
d:1.93.00.00
and nothing else since yesterday... I can get it to bootloader tricolor screen but that's all cause no matter what i try to flash it stops randomly at X% and get error update. The only difference was Radio_1.12.25.19 that seemed to work. Hard reset doesn't work either cause i get the same start image with orange and that's all.
lexxa v said:
I have the same problem with my phone after i tried to update rom.
I flashed hardspl 1.40.OliNex and then Diamond_Radio_1.00.25.07 ...everything ok until i tried ruu_diamond_orange_ro_1.37.70.1_radio_signed_diamond_52.33a.25.17_1.00.25.08_ship.
Now it only shows an image with orange and
r: 1.12.25.19
g: 52.60.25.33U
d:1.93.00.00
and nothing else since yesterday... I can get it to bootloader tricolor screen but that's all cause no matter what i try to flash it stops randomly at X% and get error update. The only difference was Radio_1.12.25.19 that seemed to work. Hard reset doesn't work either cause i get the same start image with orange and that's all.
Click to expand...
Click to collapse
and pls tell me where you bought ur diamond from and if you know the stock rom which shud be in ur device.
even if u dont know the answer to 2nd question tell me where you bought ur phone and ur country
ayyu3m said:
and pls tell me where you bought ur diamond from and if you know the stock rom which shud be in ur device.
even if u dont know the answer to 2nd question tell me where you bought ur phone and ur country
Click to expand...
Click to collapse
I live in Roumania and bought the phone from someone and i don't know where did he get it from... but when i tried the official htc suport they said that my phone was made for Czech Republic and that's why my ROM update doesn't work...
The answer to second question is that i don't know
Can someone help me please? I don't know what to do now...
Btw the person from whom you bought the device is a resident of Romania?
Yes, he is.
okay can you go into bootloader mode and tell me everything on the screen
DIAM100 MFG 64G
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again
USB
thankx. thats all i need for now. let me try to come up with a rom for you...
btw did you have any carrier logo before you ran into this problem...i mean like instead of the orange logo did you have any vodafone logo or just the htc logo during start up
AND do you have a front facing camera for video calls?
I had only the htc logo at start-up and i do have a video camera front facing.
Okay i found your stock ROM.
Do exactly as i say....
go to this link and scroll down to bottom...
http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2
when you go to the bottom of the page, you will be requested to enter ur SERIAL NUMBER which you just found under your battery.
Enter and press submit.
now select the file Windows_Mobile_6.1_East_Europe and start downloading...
let me know if the download has started also
I started the download ...
Okay good. So once the download complete you are ready to flash...
This is how to flash...
1. Put ur device in bootloader mode again.
2. Connect the device to ur PC
3. RUN the downloaded file....and press NEXT NEXT NEXT....
Reply back if the flashing process is goind smooth or even if you face any problem...
Then i can finally go and sleep
Hi all!
I tried to flash my HTC (I had already do that and all was ok), but this time something has gone wrong.
Now I can turn on my phone but when I see the startup screen (black screen it doesn't load windows) it frozen.
Now, I'd like to know if there is a way to change my ROM without Active Sync and without boot the device, just from the internal memory.
Can anyone help me. I've lost my HTC son and I'm still crying
Thank You,
Leo
Try flashing the ROM again or do a hard reset.
If the above does't work try with DiamDowngrader.exe
Just put your Diamond in bootloader mode and start the program.Then follow the instructions on the screen.
If you can't find it I can send it to you.
Hi ivobmw, please send me the software.
Thanks,
Leo
You can flash from bootloader,to get in bootloader hold volume down when the phone is off and you will get to a tricolour screen
connect the usb and flash a rom that is known to be working from the pc like usual
How can i directly flash from from bootloader? Can you help me?
leowap said:
How can i directly flash from from bootloader? Can you help me?
Click to expand...
Click to collapse
Go in bootloader mode (hold volume down when the phone is off)
connect to the pc,start CustomRUU to flash and you are done
Thank you HELI! You saved my Diamond!
leowap said:
Thank you HELI! You saved my Diamond!
Click to expand...
Click to collapse
You are welcome
hello guys,
after a long research i landed to this forum at last.
today morning i had a client who wanted to have new rom on his tp2 with russian language. but unfortunatly i flashed the tp2 with a wrong flasher! first time hapening something like this... i was pretty sleepy that i didnt even recognised that it was the wrong one... and now the client wants his phone back but the phone dosnt even turn on and not going in the boot menu... only when i plug the usb cable to the pc with the tp2, the pc recognises that there is a usb connected.. but only this.. im really stuck in a bad situation i would be very appreciative if someone can help me with this out the client will come tomorrow again, i hope there is some options to get the tp2 back alive
Try to flash back with stock, but depending on what you've flashed, it might very well be bricked.
This is why you should always be careful as to pay attention to what you are flashing.
Did you apply the wrong hSPL, or the wrong ROM? Did you flash something meant for a CDMA device on a GSM device...? Please, explain exactly what you have done.
Firstly thank you very much for your answer. I apply the wrong hSPL. HardSPLWrapper_Blackstone i used, the hSPL from blackstone >.< ..my device is htc touch pro 2 Sprint . It much be CDMA but with Gsm radio as far i know. actually the progress didnt start.. there were not a loading bar and no boot mode on phone screen (green-blue-red). suddenly phone turned off and red service light turned on.now when i connect it to pc,i hear usb connected sound and the pc reads the phone as ''qualcomm cdma tecnologies msm'' and requests driver for it.
Does anyone have a clue if there is a solution or what i can do ? or even if there is no way to fix it, except with Jtag ? :S
yildizgsm said:
Does anyone have a clue if there is a solution or what i can do ? or even if there is no way to fix it, except with Jtag ? :S
Click to expand...
Click to collapse
You flashed a RHOD with hSPL for BLAC. That's pretty blatant mistake dude.
I'm not sure if there's a way back. Try flashing stock like I already suggested. Try relocking too, I don't know.
You might have to go into mtty, erase everything, flash the radio, then flash stock. Next time, be more careful.
I would flash it back to stock but the problem is that i need to get activesync with the phone.. my pc dosnt connect to the phone with activesync because i cant open the phone :S do you think with mtty it could work mate ? im gonna search for that now.. thanks
yildizgsm said:
I would flash it back to stock but the problem is that i need to get activesync with the phone.. my pc dosnt connect to the phone with activesync because i cant open the phone :S do you think with mtty it could work mate ? im gonna search for that now.. thanks
Click to expand...
Click to collapse
Try flashing via SD?
yildizgsm said:
Firstly thank you very much for your answer. I apply the wrong hSPL. HardSPLWrapper_Blackstone i used, the hSPL from blackstone >.< ..my device is htc touch pro 2 Sprint . It much be CDMA but with Gsm radio as far i know. actually the progress didnt start.. there were not a loading bar and no boot mode on phone screen (green-blue-red). suddenly phone turned off and red service light turned on.now when i connect it to pc,i hear usb connected sound and the pc reads the phone as ''qualcomm cdma tecnologies msm'' and requests driver for it.
Click to expand...
Click to collapse
HardSpl doesn't show a progress bar when flashed. Can you manually put the phone in bootloader mode (Press volume down button and power it up)?
If you can get it into bootloader what does it show on the screen? You may be able to flash the shipped rom after you are in bootloader if when you connect to your PC it says USB toward the bottom of the bootloader screen and then click on the exe for the shipped rom on your PC. Or maybe try flashing the re-locker as suggested earlier to see if you can install the correct SPL.
i cant get bootloader mode(volum-,power up).im gonna try flash via sd if no succes then gonna try relocker ...i'll post result..
i cant get bootloader mode(volum-,power up).im gonna try flash via sd if no succes then gonna try relocker ...i'll post result..
Click to expand...
Click to collapse
If you flashed the wrong HSPL then you have bricked the device. There is no recovery outside of a jtag box. I don't know of anyone who has made one of those fora Rhodium anyway. It sounds like you owe your client some money.
By the way, if you can't get into the bootloader, then you can't flash via SD.
cajunflavoredbob said:
If you flashed the wrong HSPL then you have bricked the device. There is no recovery outside of a jtag box. I don't know of anyone who has made one of those fora Rhodium anyway. It sounds like you owe your client some money.
By the way, if you can't get into the bootloader, then you can't flash via SD.
Click to expand...
Click to collapse
Indeed, and a great way to end the thread.