MOD EDIT: Can you help, I flashed my GSM diamond with the CDMA hard SPL from PPCGeeks: http://forum.ppcgeeks.com/showthread.php?t=36062
i try to unlock my htc diamond using solution
Code:
FIRST AND MOST INPORTANT!!!
U guys MUST have HardSPL INSTALLED on ur phones BEFORE trying anything of this out...
I Suggest u use HArdSPL 1.40 Unsigned (Its in the RAR file)
AFTER u have installed HardSPL 1.40 Unsigned
Unrar and go to step 2 folder and run -> DiamonCustomRUU.exe
Just do what it says and update.
After the phone restart copy DiamUnlock.exe from the step3 folder on to your diamond
(Anywhere) and run it.
The DiamUnlock.exe closes itself very fast, i have sucessfully made it by first launching the
program and quickly and several times press up button and touch the screen
if you'r lucky the screen stay and you can sim-unlock your diamond!!
the problem that phone came in step 2 after 100% write , it show error 262
any solution thx
Please post in the thread where you got it from!
You'll get an answer, and there will be fewer threads lying around here!
i don't understand what do u mean by this ?
now i use solution from
http://forum.ppcgeeks.com/showthread.php?t=36062
after write rom my htc is totaly dead can't power on
any solution to recover it
hbstun said:
i try to unlock my htc diamond using solution
Code:
FIRST AND MOST INPORTANT!!!
U guys MUST have HardSPL INSTALLED on ur phones BEFORE trying anything of this out...
I Suggest u use HArdSPL 1.40 Unsigned (Its in the RAR file)
AFTER u have installed HardSPL 1.40 Unsigned
Unrar and go to step 2 folder and run -> DiamonCustomRUU.exe
Just do what it says and update.
After the phone restart copy DiamUnlock.exe from the step3 folder on to your diamond
(Anywhere) and run it.
The DiamUnlock.exe closes itself very fast, i have sucessfully made it by first launching the
program and quickly and several times press up button and touch the screen
if you'r lucky the screen stay and you can sim-unlock your diamond!!
the problem that phone came in step 2 after 100% write , it show error 262
any solution thx
Click to expand...
Click to collapse
He means you should ask in the thread where you found this information above.
Code:
First and foremost...
ah ! ok
i don't remember when i found it
but now my htc is totaly dead , how i can recover it ?
hbstun said:
ah ! ok
i don't remember when i found it
but now my htc is totaly dead , how i can recover it ?
Click to expand...
Click to collapse
I am not sure you can.
Does it go into bootloader mode? If not, might be JTAG is your only option.
When you say 'totally dead' do you mean you get absolutely nothing when you try plugging in the usb cable ?
Logically as soon as you plug in the cable it'll power on into the tri-colour screen.
It'll do this even if you remove the battery.
aE3-ink said:
When you say 'totally dead' do you mean you get absolutely nothing when you try plugging in the usb cable ?
Logically as soon as you plug in the cable it'll power on into the tri-colour screen.
It'll do this even if you remove the battery.
Click to expand...
Click to collapse
nothing hen i put usb cable nothing in the screen
Kevbodian said:
I am not sure you can.
Does it go into bootloader mode? If not, might be JTAG is your only option.
Click to expand...
Click to collapse
what do u mean by jtag and how i can do it ?
<mod mode>
Please stop spamming the forum with requests for Help and I have updated the title of this post so that it may get more attention.
</mod mode>
JTagging can be done using QMAT, if need be.
Before that, can you put your Diamond into the Bootloader or not ??
Thanks
Dave
Serves you right for using a leaked unlocker program - Should have gone here . thanks to Olipro as the leaked version was buggy.
I do hope you get this fixed though. (I would help if I could really).
DaveShaw said:
<mod mode>
Please stop spamming the forum with requests for Help and I have updated the title of this post so that it may get more attention.
</mod mode>
JTagging can be done using QMAT, if need be.
Before that, can you put your Diamond into the Bootloader or not ??
Thanks
Dave
Click to expand...
Click to collapse
can't enter bootloader ?
hbstun said:
can't enter bootloader ?
Click to expand...
Click to collapse
In that case I suggest you PM ViperBJK and as him nicely to look at the thread...
He's the main man on JTAG'ing.
Thanks
Dave
DaveShaw said:
In that case I suggest you PM ViperBJK and as him nicely to look at the thread...
He's the main man on JTAG'ing.
Thanks
Dave
Click to expand...
Click to collapse
ok thx anyway for your help
R3PUBL1K said:
Serves you right for using a leaked unlocker program - no sympathy or help from me.
Should have gone here thanks to Olipro as the leaked version was buggy
Click to expand...
Click to collapse
I think he tried the unlock before he flashed the cdma hardspl.
Kevbodian said:
I think he tried the unlock before he flashed the cdma hardspl.
Click to expand...
Click to collapse
yes i tried unlock but failed
i found rom in some website and i flashed it to my phone
but now it dead
You must eter in "USB Trigger Mode"
hbstun said:
yes i tried unlock but failed
i found rom in some website and i flashed it to my phone
but now it dead
Click to expand...
Click to collapse
I think I can help you ...
Just this **** happened to me too ... because I did not read carefully ROM-destination, but we resolved the issue after a couple, three hours of bloody despair ...
Be sure before you get to work, you already have prepared a full ROM image (....nbh) for your Diamond, that is to contain radio too. If you do not have a full version, download a full version first and make sure that contains both ROM and Radio.
1. Take cover behind the phone
2. USB link cable to the computer and phone
3. Open the phone
4. Enter bootloader mode as follows:
Keep the volume down key and click with the stylus reset button (red button which is located behind the device ) for 3-4 seconds in the same time with the volume down key, then you can get out your stylus, and continued to keep volume down key, until the bootloades screen appears, now you can release the volume key down too.
And now, just simply launch DiamonCustomRUU.exe to start your flash, using a file manager, and is ready ... you have a new phone!
I hope I was helpful ...
kokocf said:
I think I can help you ...
Just this **** happened to me too ... because I did not read carefully ROM-destination, but we resolved the issue after a couple, three hours of bloody despair ...
Be sure before you get to work, you already have prepared a full ROM image (....nbh) for your Diamond, that is to contain radio too. If you do not have a full version, download a full version first and make sure that contains both ROM and Radio.
1. Take cover behind the phone
2. USB link cable to the computer and phone
3. Open the phone
4. Enter bootloader mode as follows:
Keep the volume down key and click with the stylus reset button (red button which is located behind the device ) for 3-4 seconds in the same time with the volume down key, then you can get out your stylus, and continued to keep volume down key, until the bootloades screen appears, now you can release the volume key down too.
And now, just simply launch DiamonCustomRUU.exe to start your flash, using a file manager, and is ready ... you have a new phone!
I hope I was helpful ...
Click to expand...
Click to collapse
can't enter bootloader like u sad !
hbstun said:
can't enter bootloader like u sad !
Click to expand...
Click to collapse
Hello there! Where have you blocked, exactly ...?
Related
So...I've been using an older version of Dutty's ROM, but I haven't updated in a few weeks.
Tonight, out of nowhere, my phone will now only show a screen saying:
"This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers.
To obtain a newer release or further information, please revisit the web site that you used to obtain your current beta release."
Strange...
I tried downloading the most recent version of Dutty's rom and loading it, but the computer says "Cannot connect to your PDA phone..."
What's going on here!?
I have tried resetting the phone via the reset button (under the stylus), and I have tried restarting the phone via soft/hard reset, but nothing works!
Everytime my phone turns on, it goes immediately to this white page saying the "This concludes the beta test of this software release..."
How can I make my Diamond work again?!?
Please help!
i am having the same problem tonight too
i did a hard rest.. didnt fix it.. plus i lost all the stuff i had on there.. but it's ok
i heard u need to reflash it or something but i donno the full detail.. hope someone here can help us... thanks
step by step instruction would be great
I think you must put your diamond in "bootloader mode". and you will reflash your phone with a new rom, or another rom...
Booloader mode (usb) = Volume down + reset
In the screen (down) = serial, and if you connect with usb you can see "usb" and now you can reflash!
how can i reflash? i'm VERY new with this smartphone stuff my first smartphone so i donno a lot of stuff..
does it need HSPL 1.24? cause if it does i cant seem to run DiamondCustomRUU after my phone went black screen
i will try the "bootloader" mode, but i hope it works! i will post results a.s.a.p.!
Same for me on Dutty 2.3, but did hard reset and let phone set up. Do NOT change the date, I left mine as September, and phone will continue to set up and start. Now what I need to know is if I flash with latest rom will that allow me to set current date?
bigbro168 said:
how can i reflash? i'm VERY new with this smartphone stuff my first smartphone so i donno a lot of stuff..
does it need HSPL 1.24? cause if it does i cant seem to run DiamondCustomRUU after my phone went black screen
Click to expand...
Click to collapse
You put "volume down" and, in same time, you put "reset" (you hold these 3 seconds) => and you enter in bootloader, then you connect your diamond to USB and launch installation...
i think you don't need a HSPL if you want flash with the same rom... but you may use another HSPL for another rom...
OK - so i just started in Bootloader mode as suggested...
after that, i plugged it in to my computer vis USB.
then, i opened the most recent rom updater (supplied by dutty...see the thread in this forum).
it is currently updating, and everythign is looking good.
so, why do you have an experation on your rom's dutty??? what's up with that?!?
thanks fabe
but let say i want to flash the SwithBL Rom.. it's not the one i used b4.. do i still need HSPL? if yes how do i install so i dont get the black screen and it actually works?
theorie said:
OK - so i just started in Bootloader mode as suggested...
after that, i plugged it in to my computer vis USB.
then, i opened the most recent rom updater (supplied by dutty...see the thread in this forum).
it is currently updating, and everythign is looking good.
so, why do you have an experation on your rom's dutty??? what's up with that?!?
Click to expand...
Click to collapse
can u send me the pw for dutty's ROM? i cant seem to unzip it.. just wondering did u use HSPL?
bigbro168 said:
can u send me the pw for dutty's ROM? i cant seem to unzip it.. just wondering did u use HSPL?
Click to expand...
Click to collapse
i just downloaded & installed: V2.9_5_2_20275_RTM_Full_MSVC
http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
the password is: Duttys V2.9 RTM Finale
i have HSPL installed.
bigbro168 said:
can u send me the pw for dutty's ROM? i cant seem to unzip it.. just wondering did u use HSPL?
Click to expand...
Click to collapse
careful you might get banned. see dutty's thread.
We have a thread for dutty's ROM. Please discuss there!
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
something? PLEASE!
You mention you can not get into boot loader by pressing
Vol_- + reset.
Click to expand...
Click to collapse
On the Diamond you can access bootloader by jsut reseting and holding down the "Vol Down" Key only...
Try this and report back.
Where is this error 260 indicated ? If the ROM starts up and shows some error, the bootloader will work for sure.
Cya,
Viper BJK
try to make an hard reset by press vol down + central button + reset.
maybe you have to use mtty but I can't help you cause I never use it...
R3PUBL1K said:
You mention you can not get into boot loader by pressing
On the Diamond you can access bootloader by jsut reseting and holding down the "Vol Down" Key only...
Try this and report back.
Click to expand...
Click to collapse
That what I told volume down + reset not working with this phone. It is in another one which I have here.
The phone doesn't show any signs of life, I think I need test point or maybe JTAG way to repair it......
Any suggestions?
viperbjk said:
Where is this error 260 indicated ? If the ROM starts up and shows some error, the bootloader will work for sure.
Cya,
Viper BJK
Click to expand...
Click to collapse
I don't know I got this phone it this condition with a story about this error.
I don't actually know what happened, but I believe that this phone bricked down in the middle of unlocking process.
Zoosman said:
The phone doesn't show any signs of life, I think I need test point or maybe JTAG way to repair it......
Any suggestions?
Click to expand...
Click to collapse
If there is no life in the phone then there is not much we offer/say to help.
Have you tried another battery?
omar 1958 said:
...
2. with a fully charged battery, reset your device (hard reset) press Volume down + centre round button + soft reset(behind battery cover) all at the same time, release soft reset but keep holding volume down + centre button. You should now have a white screen advising you what to do to complete the hard reset.
Click to expand...
Click to collapse
Only to make a bit easy this step cause in this way one would be an octopus , soft reset your device with stylus and then, within 3 seconds, hold Vol down + centre round button until you see the tricolour screen. Release the buttons and follow the instructions (Press Vol Up to restore to manufactured settings).
This is the typical case when someone didnt do his homework. Im sure you didnt read the stickies. Poeple be warned, flashing your device can kill it if you dont have a clue on what you are doing. Ive seen a bunch of n00bs bricking their devices just because the didnt read the forum. This question has been ansewred a lot.
Zoosman said:
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
Click to expand...
Click to collapse
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
sorry friend to hear but i have one solution may be it can work u just flash hard spl v 1.93 olinex from here:http://ficca.bounceme.net/download/HARDSpl_Diamond_OliNex_1.93_Unsigned.zip just flash this hspl and after flashing this u can flash any rom but now u just flash this hspl if u got 100% then ur prob is solve so pls tell me what happen after that hope every thing will be alright good luck
Error 260 is a USB communication error. Did this happen during sim unlock or during hardspl install because the thread title says one thing and your post says another.
Zoosman said:
HI all! It will be more then great if anybody can help me.
The story is simple one guy decide to unlock his Diamond throw some free way ( I don't know how exectly ) he end with error 260 and DEAD Diamond.
The device does not get into bootloader when pressing Vol_- + reset.
Now this Diamond in my hands.
Can anyone please advice what can I do? can I flash ROM?
P.S. this phone are new and Orange UK branded.
Please help and sorry for my poor English.
Click to expand...
Click to collapse
R3PUBL1K said:
If there is no life in the phone then there is not much we offer/say to help.
Have you tried another battery?
Click to expand...
Click to collapse
I have the same problem.. i tried a flash and then it wont turn on.. not even hard reset not even soft reset.. it wont even charge or indicate charging.
charly_mx said:
This is the typical case when someone didnt do his homework. Im sure you didnt read the stickies. Poeple be warned, flashing your device can kill it if you dont have a clue on what you are doing. Ive seen a bunch of n00bs bricking their devices just because the didnt read the forum. This question has been ansewred a lot.
Click to expand...
Click to collapse
Hey charly, i flashed my phones many times, i've bricked it , got stuck on the tricolour screen.... but this time it's different... the phone it's completely dead... no light .. not charging no tricolour .. nothing:S
try this method for ur diamond
first remove ur battery form ur device and press the power button for 20 seconds . so it will discharge the power from ur device. after that put ur battery and press volume - and power on button to enter boot loader ... dont press reset button to enter bootloader ok !! hope this works for u , best of luck.
noluck
rahmaneee said:
first remove ur battery form ur device and press the power button for 20 seconds . so it will discharge the power from ur device. after that put ur battery and press volume - and power on button to enter boot loader ... dont press reset button to enter bootloader ok !! hope this works for u , best of luck.
Click to expand...
Click to collapse
no luck.... i did the battery on the fridge processs.. no luck with that either... now i'm gonna check the battery with somekind of instrument and after that i'm gonna open my diamond to little pieces and put it back together... in quest for a fix
constantine_mk said:
no luck.... i did the battery on the fridge processs.. no luck with that either... now i'm gonna check the battery with somekind of instrument and after that i'm gonna open my diamond to little pieces and put it back together... in quest for a fix
Click to expand...
Click to collapse
... Because THAT will fix it
hahahha, no no no... the PDA fary will..
dieselboy said:
... Because THAT will fix it
Click to expand...
Click to collapse
hahahha, no no no... the PDA fary will..
a did some measurements, the battery was 2.8V, i put it on the phone, put the phone in ccharger, and it did charge the batery to 3.7V(even the baterry led is not working).. i measured the phone also it gives 4.15V to the battery... i dont know is he charging correctly.. but it's charging the battery for sure.. ..... any clues ppl?
Hiya XDA
I've been trying all evening to get any HardSPL onto my Diamond without success, everytime I try I get to 0% and after a few minutes "error [260] connection" and the phone keeps its' black screen until I soft-reset it.
Can anyone help me get a hardspl onto my phone? I would really like to try WM6.5. I've read many SPL-guides already, so you don't have to point me to them
(even that on modmydiamond.info)
Thanks in advance!
esset said:
Hiya XDA
I've been trying all evening to get any HardSPL onto my Diamond without success, everytime I try I get to 0% and after a few minutes "error [260] connection" and the phone keeps its' black screen until I soft-reset it.
Can anyone help me get a hardspl onto my phone? I would really like to try WM6.5. I've read many SPL-guides already, so you don't have to point me to them
(even that on modmydiamond.info)
Thanks in advance!
Click to expand...
Click to collapse
Here's the Tutorial and here's the Troubleshooter. They're both stickies. Please search and read before posting.
Thanks for the quick response, but as I said. I've read all stickies and guides, and it's still stuck at 0%.
esset said:
Thanks for the quick response, but as I said. I've read all stickies and guides, and it's still stuck at 0%.
Click to expand...
Click to collapse
Did you let your device sync with Activesync/Windows Mobile Device Center?
Try recreating the sync pairing.
Try uninstalling the device from PC's Device Manager and reinstalling it and then try recreating the sync partnership.
Try another USB port.
Yes, yes, yes and yes. I even tried doing it on my laptop.
Edit: I even tried flashing down to 1.93 with HTCs official stuff, no success there either
esset said:
Yes, yes, yes and yes. I even tried doing it on my laptop.
Edit: I even tried flashing down to 1.93 with HTCs official stuff, no success there either
Click to expand...
Click to collapse
Another USB cable?
Try manually entering bootloader and connect to PC. The label should say USB not Serial and try from there.
esset,
May I ask what branding/model of the Diamond you own?
I own a pure AT&T model just purchased a week or two ago. And, so far I've also had almost zero luck flashing it. I'm moving from an AT&T Tilt which I've flashed so many times, the USB port is starting to wear down. I've also got a lot of experience with many small computing devices with all types of weird programming and flashing routines, so I'm not a newbie. But the AT&T Fuze just seems to be locked in a way that has yet to be covered by the good XDA folks here. Heck, I can't even dump the shipped ROM off the device to send it here for checking out by the developers. All I've been able to do is flash an odd 1.90 HardSPL that seems to have locked the phone even tighter than before. YUCK!
If you're in this same scenario, I'd suggest patience. Eventually someone with enough knowledge of these devices will be able to help out. It is frustrating though, after flashing the other phone so many times with so many different configurations to be held back on the new one.
tnyynt said:
Try manually entering bootloader and connect to PC. The label should say USB not Serial and try from there.
Click to expand...
Click to collapse
You might find this odd. The down-volume + back arrow key combo doesn't seem to work with some of the new versions of the Diamond. I've tried on two of them, and neither respond to this key combo at startup.
Many times entering the bootloader is not a problem though. The routine does cause the phone to go there. And, I can get it there by other means. Just not via the boot up sequence. This tells me there is something very different about these models....
I tried starting and flashing directly from the bootloader (showing USB), and the phone got to show a percentage field (the one when you are flashing) but same here, is constantly at 0% until the flashing utility times out and tells me to reboot my phone and guides me through steps if it has been semi-bricked (bootloader is the volume down + softreset, right?)
I bought my phone in the first shipment to Sweden, it's not locked to any company, bought it without subscription
Else I just flashed it up to latest ROM from htc.com (still no success with HardSPL ) to 2.03.413.2 SVE (02/06/09)
Radio: 1.09.25.23
Version: 52.51.25.26H
ninjaedit: (In the four-colored bootloader thing it says DIAM100 64M SPL-2.03.0000 MicroP-Diam (LED) v11)
Tell me if you need any other info :]
Here's another indication that the new phones are different. I've copied a DIAMIMG.nbh file to both a flash card inside the phone, and to it's internal memory. (sorry, but the thread on that location is confusing on what memory. I assume like most phones of the past that it's supposed to be the flash card, but "internal memory" is not a flash card.) But, the loader screen always responds with "no image file" when it's called up. So, is there a different name expected now?
put manual hardspl into your device, and click to it from your device..
zerocool81 said:
put manual hardspl into your device, and click to it from your device..
Click to expand...
Click to collapse
Tried that with every Hard-SPL linked to from this thread: http://forum.xda-developers.com/showthread.php?t=415191
Didn't work
Something's changed.
zerocool81 said:
put manual hardspl into your device, and click to it from your device..
Click to expand...
Click to collapse
Hi uhm, was that answer aimed for me or to scottwilkins?
If it was for me, is it possible to flash the mobile directly from the memory-card (or internal flash card)? Else if you mean the "manual make-the-screen-black-and-go-to-bootloader" my screen just goes blank, as when you do it with the RUU, and just stops there. Also seems like it looses the connection via USB doing so too. And flashing through the bootloader directly (volume down at softreset) shows the progressbar on the phone, but steadily at 0% (when trying to flash).
search and download
a) SDA_ApplicationUnlock.exe (Desktopprogram)
b) EnterBootloader.exe (ATTENTION: it must be that for diamond, normaly find by flashing-tools)
connect with active sync and copy EnterBootloader.exe to pda-root.
start SDA_ApplicationUnlock.exe on desktop and follow all but reset (DONT RESET)
start EnterBootloader.exe on pda
if bootloader-Mode and USB-Label than start flashing
wait for response
scottwilkins said:
Tried that with every Hard-SPL linked to from this thread: http://forum.xda-developers.com/showthread.php?t=415191
Didn't work
Something's changed.
Click to expand...
Click to collapse
try this.. put this file into internal storage and lounch this from ppc
http://rapidshare.com/files/207721836/SSPL-Manual.rar
okokur said:
search and download
a) SDA_ApplicationUnlock.exe (Desktopprogram)
b) EnterBootloader.exe (ATTENTION: it must be that for diamond, normaly find by flashing-tools)
connect with active sync and copy EnterBootloader.exe to pda-root.
start SDA_ApplicationUnlock.exe on desktop and follow all but reset (DONT RESET)
start EnterBootloader.exe on pda
if bootloader-Mode and USB-Label than start flashing
wait for response
Click to expand...
Click to collapse
I tried what you suggested, I successfully unlocked the phone (and did Not reboot it). Ran the bootloader; and the screen just went black, as usually, and nothing more happens
zerocool81 said:
try this.. put this file into internal storage and lounch this from ppc
http://rapidshare.com/files/207721836/SSPL-Manual.rar
Click to expand...
Click to collapse
That program makes the Fuze screen just turn black and do nothing. Cool, huh
Seems that the newer stock ROMS might be blocking something... hmmmm....
Well, crap!
I just figure out where my whole problem is...
The Fuze (my phone) = The Raphael
NOT the Diamond.
I just scrolled down the forum list, saw a phone that looked like mine and went there. DOH!
I feel like a total dumb-ass.
If I'd scrolled just a bit farther down the XDA forum, then I'd seen the Raphael phone.
Holy Cow! Go ahead, say it, I deserve it...
Thanks for all the help otherwise. It was a learning experience for me....
esset said:
I tried what you suggested, I successfully unlocked the phone (and did Not reboot it). Ran the bootloader; and the screen just went black, as usually, and nothing more happens
Click to expand...
Click to collapse
hi,
i think, you have the wrong bootloader.
i find this and try it by me self. this brings your fone definitly to bootloader.
than you can start manualy the hard spl by normal description way.
http://rapidshare.com/files/208123046/EnterBootloader.exe.html
okokur said:
hi,
i think, you have the wrong bootloader.
i find this and try it by me self. this brings your fone definitly to bootloader.
than you can start manualy the hard spl by normal description way.
http://rapidshare.com/files/208123046/EnterBootloader.exe.html
Click to expand...
Click to collapse
Thanks, but that file takes me into the bootloader, and when I start flashing the percentage is still at 0% until the software times out. Same as before, just the usual "going-into-the-bootloader".
Hi!!! i've got a serious problem!! i own a HTC Touch Pro 2. The TOUCHscreen stopped working for i don't know what reason! i need to remove hard spl for warranty reasons....but i cant!! because i need to tap on the screen the YES to allow installation. Tried already with keyboard but i can't. I tried to install registry editors but i still need the YES to confirm the installation. So in conclusion i need to find a way to remove windows' confirm on every damn thing!!!!! thanks guys! i'd really appreciate your help!
Moved to Touch Pro2 area
have you tried using Mymobiler? It will allow you access to your device thru your pc
tried already!! but to make it work it still needs me to confirm. Thanks anyway.....
americano91 said:
Hi!!! i've got a serious problem!! i own a HTC Touch Pro 2. The TOUCHscreen stopped working for i don't know what reason! i need to remove hard spl for warranty reasons....but i cant!! because i need to tap on the screen the YES to allow installation. Tried already with keyboard but i can't. I tried to install registry editors but i still need the YES to confirm the installation. So in conclusion i need to find a way to remove wondows' confirm on every damn thing!!!!! thanks guys! i'd really appreciate your help!
Click to expand...
Click to collapse
I had a bad USB port and used the SD card to flash to the .87 SPL, which is what T-Mobile uses. I think it was just a matter of putting the correct file on the card and going into bootloader.
EDIT: That was a few weeks ago, IIRC, I had to push the UP Volume to confirm the load.
Hey, It's always me, "americano91"! I'm having Internet problems at home, so I'm writing with my friend's account... anyway, where can I find "the correct file" for rhodium? Because the only way to get back to the 0.79.0000SPL was the .exe file (RhodiumSPLRelocker_079SPL.zip, from the Hard SPL release thread) that has to be executed from PC. So the question is: do I have to find another file to put on the card? (just on the card, in the root, in some specific folder or alone in the whole card?)
Thank you!
RedSnake9 said:
Hey, It's always me, "americano91"! I'm having Internet problems at home, so I'm writing with my friend's account... anyway, where can I find "the correct file" for rhodium? Because the only way to get back to the 0.79.0000SPL was the .exe file (RhodiumSPLRelocker_079SPL.zip, from the Hard SPL release thread) that has to be executed from PC. So the question is: do I have to find another file to put on the card? (just on the card, in the root, in some specific folder or alone in the whole card?)
Thank you!
Click to expand...
Click to collapse
Pick the other stock spl from the thread and that one you can flash from your SD.
Lennyz1988 said:
Pick the other stock spl from the thread and that one you can flash from your SD.
Click to expand...
Click to collapse
to show you the thread i'm talking about i'll give you the thread's name since i can't link it (it's a thread by xda not another forum): Hard-SPL Unlocker for Rhodium (AT&T Tilt 2) Released! Important Update for new users!. The only other stock spl i see is in note 3 (sspl manual rhodium) can you check it out please? Thanks
americano91 said:
to show you the thread i'm talking about i'll give you the thread's name since i can't link it (it's a thread by xda not another forum): Hard-SPL Unlocker for Rhodium (AT&T Tilt 2) Released! Important Update for new users!. The only other stock spl i see is in note 3 (sspl manual rhodium) can you check it out please? Thanks
Click to expand...
Click to collapse
It seems that it is a little more difficuilt then I thought.
Read this if you want to restore spl from your sd card.
http://forum.xda-developers.com/showpost.php?p=6148435&postcount=2017
He is talking about this spl Stock_SPL_Restore_084.zip, it can be found in the thread that you mention
Lennyz1988 said:
It seems that it is a little more difficuilt then I thought.
Read this if you want to restore spl from your sd card.
Stock_SPL_Restore_084.zip, it can be found in the thread that you mention
Click to expand...
Click to collapse
thanks but i used to have 0.79 spl so i should install the 0.79. Is it ok if i install 0.84 spl or the htc support will notice that i had 0.79?
americano91 said:
thanks but i used to have 0.79 spl so i should install the 0.79. Is it ok if i install 0.84 spl or the htc support will notice that i had 0.79?
Click to expand...
Click to collapse
If you want to install 0.79....
1. Go into bootloader (hold volume down + hold power on)
2. Put your usb cable in your pc and your phone. You should now see USB in the bootloader.
3. Run the 0.79 on your computer.
Lennyz1988 said:
If you want to install 0.79....
1. Go into bootloader (hold volume down + hold power on)
2. Put your usb cable in your pc and your phone. You should now see USB in the bootloader.
3. Run the 0.79 on your computer.
Click to expand...
Click to collapse
thaks!! you're awsome!!! one last question......i just have to follow these three steps??? or is there something else???? thanks again!
americano91 said:
thaks!! you're awsome!!! one last question......i just have to follow these three steps??? or is there something else???? thanks again!
Click to expand...
Click to collapse
Make sure you flash a stock rom + radio first that's all.
Screen problem
hi all...been a while now with this problem. My xda mini II only gives me a white screen. I can hear a startup chime, as if it is ready to be callibrated, but only a white screen shows. I have tried soft reset, bootloader, and even physcically resetting the screen under the case.
faheemnp said:
hi all...been a while now with this problem. My xda mini II only gives me a white screen. I can hear a startup chime, as if it is ready to be callibrated, but only a white screen shows. I have tried soft reset, bootloader, and even physcically resetting the screen under the case.
Click to expand...
Click to collapse
This is the Rhodium forum, you should go to the mini II for your questions.
Hello everyone, i have used this site for root another phones on past but now i can't understand how to fix my problem by myself. Thats why i'm here to kindly ask(beg) for help.
I tryed to root the phone, first i used the Framaroot, i thought it worked but look likes not, i'm getting the Secure booting Error! Couse: boot certification verify.
Ok, looks not a big deal, lots of guys got it and solved their problems with this post. But now is where i ask sorry because i couldn't make it.
I can enter on dowload mode, i tried all the steps on the post and did not worked. I need a light.
When i used the KDZ_FW, i got a message of error on extrating file.
When i tryed make a Recovery Hard Reset, i got the message Secure booting Error! Couse: boot certification verify.
When i try to turn it on by pressing the power + volumerdown = nothing happen.
I have a Optimus G E977, and the software was the E97710d.
Thanks for the attention.
http://forum.xda-developers.com/showpost.php?p=45355871&postcount=1
Question 5. I know it's hard to read before..i see things didn't changed around since i left. I see same lazy people,rushing into things before looking around....pffff....
Maybe U can help me too.
Everything was fine with my OG but problems start when installing CM11. I decided to go back to stock later (I did it) but then couldnt be able to enter recovery or download mode. I tried several methods like re root, unlock again and lately using ROM Manager and trying to install another recover all get screwed up. Only black screen. Trying and trying I could install KDZ firmware
So then I root, unlock boatloader with method one from here: http://forum.xda-developers.com/showthread.php?t=2667398
Ok i dont know if boatloader is unlocked now but i know I cant enter recovery or download mode. Im afraid to use freegee to try to unlock again.
What should I do.
Thanks
kimitza said:
http://forum.xda-developers.com/showpost.php?p=45355871&postcount=1
Question 5. I know it's hard to read before..i see things didn't changed around since i left. I see same lazy people,rushing into things before looking around....pffff....
Click to expand...
Click to collapse
kimitza said:
http://forum.xda-developers.com/showpost.php?p=45355871&postcount=1
Question 5. I know it's hard to read before..i see things didn't changed around since i left. I see same lazy people,rushing into things before looking around....pffff....
Click to expand...
Click to collapse
I appreciate your intention to help, maybe its because i'm a Braziliam guy, with not the best english, that i can't figure how to use the FREEGEE app if i can't start the cellphone.
Thanks again.
OBS: I have used that app too before get this error. And was just becouse tryed to enter on recovery mode that i got that message.
I understand that your celphone cant turn on or enter download mode or recovery?
If thats your situation maybe I can help U (I think)
Fuguets said:
I appreciate your intention to help, maybe its because i'm a Braziliam guy, with not the best english, that i can't figure how to use the FREEGEE app if i can't start the cellphone.
Thanks again.
OBS: I have used that app too before get this error. And was just becouse tryed to enter on recovery mode that i got that message.
Click to expand...
Click to collapse
Well, i'll try to explain all to not get missunderstood.
My situation is, without the USB cable the celphone don't respond to any button press.
With USB cable, by the momment that i plug it, the screen shows the error message.
With the USB cable and in the error message screen, i can press the volume buttons +- and power, after that the phone restart and shows the download mode.
What i know so far is, if i can enter download mode, and here is your words, all is not lost.
Knowing that, all solutions i found on this site doesn't work with me. Or, what is possible, i didn't make it right.
The phone do not enter on recovery mode.
I gess this is all. For now
Thanks for the patience to teach who needs to be teached.
ErnestoD said:
I understand that your celphone cant turn on or enter download mode or recovery?
If thats your situation maybe I can help U (I think)
Click to expand...
Click to collapse
My previous problem was far worst than yours.
I recommend U to uninstall all LG stuff from your PC and follow this guide: http://www.htcmania.com/forumdisplay.php?f=1026
Its in spanish so I think U wont have much problem
I did it yestesrday and save me. Whit it U will install a new KDZ firmware, even if it is bigger than 1GB
Good luck
QUOTE=Fuguets;51799238]Well, i'll try to explain all to not get missunderstood.
My situation is, without the USB cable the celphone don't respond to any button press.
With USB cable, by the momment that i plug it, the screen shows the error message.
With the USB cable and in the error message screen, i can press the volume buttons +- and power, after that the phone restart and shows the download mode.
What i know so far is, if i can enter download mode, and here is your words, all is not lost.
Knowing that, all solutions i found on this site doesn't work with me. Or, what is possible, i didn't make it right.
The phone do not enter on recovery mode.
I gess this is all. For now
Thanks for the patience to teach who needs to be teached.[/QUOTE]
As I see, if i'm looking for the guide you are refering, of install the original rom, is the same one that i already tried and i got message error of extract file.
I deleted all lg stuff from computer, downloaded everything of the guide and the message is the same.
Any more suggestion ?
PS: I prefer english version , at least to read is easy to me.
Edit1:I wonder if the fact of my kdz file be bigger than 1gb causes that ?
Edit2: When i try the guide on this link the step 7 does not show to me, and my phone or some similar does not show on the Usb Controler list to install.
Thanks again
ErnestoD said:
My previous problem was far worst than yours.
I recommend U to uninstall all LG stuff from your PC and follow this guide
Its in spanish so I think U wont have much problem
I did it yestesrday and save me. Whit it U will install a new KDZ firmware, even if it is bigger than 1GB
Good luck
QUOTE=Fuguets;51799238]Well, i'll try to explain all to not get missunderstood.
My situation is, without the USB cable the celphone don't respond to any button press.
With USB cable, by the momment that i plug it, the screen shows the error message.
With the USB cable and in the error message screen, i can press the volume buttons +- and power, after that the phone restart and shows the download mode.
What i know so far is, if i can enter download mode, and here is your words, all is not lost.
Knowing that, all solutions i found on this site doesn't work with me. Or, what is possible, i didn't make it right.
The phone do not enter on recovery mode.
I gess this is all. For now
Thanks for the patience to teach who needs to be teached.
Click to expand...
Click to collapse
[/QUOTE]
I didnt see that on XDA. I used this method with 2 kdz´s, one smaller and another one bigger than 1gb.
Maybe U missed something.
Fuguets said:
As I see, if i'm looking for the guide you are refering, of install the original rom, is the same one that i already tried and i got message error of extract file.
I deleted all lg stuff from computer, downloaded everything of the guide and the message is the same.
Any more suggestion ?
PS: I prefer english version , at least to read is easy to me.
Edit1:I wonder if the fact of my kdz file be bigger than 1gb causes that ?
Edit2: When i try the guide on this link the step 7 does not show to me, and my phone or some similar does not show on the Usb Controler list to install.
Thanks again
Click to expand...
Click to collapse
[/QUOTE]
Now I am really worried about that. I just can't acces the phone by any kind of way.
When i try the Unlock Botloader, it says that didn't found my device.
Now, after restart the computer, it says: The system cannot find the patch specified.
Is there no more options for me ?
The drivers I have downloaded here was automaticly updated from 8.0xx to 10.0xx, I unterstand this is a good thing, am I wrong ?
Could U flash KDZ using the method from htc mania?? (Im using it rigth now with 1.2GB KDZ firmware)
How did U come to that situation?
Fuguets said:
Now I am really worried about that. I just can't acces the phone by any kind of way.
When i try the Unlock Botloader, it says that didn't found my device.
Now, after restart the computer, it says: The system cannot find the patch specified.
Is there no more options for me ?
The drivers I have downloaded here was automaticly updated from 8.0xx to 10.0xx, I unterstand this is a good thing, am I wrong ?
Click to expand...
Click to collapse
I did that, while i use the KDZ one minute after start unpacking the file, it shows the error message and finish the procces. I don't know if is that what you were asking.
When I tried the button Read Phone Information, it tells me Emergency Not Support Batt Level Check.
Is that the problem ?
ErnestoD said:
Could U flash KDZ using the method from htc mania?? (Im using it rigth now with 1.2GB KDZ firmware)
How did U come to that situation?
Click to expand...
Click to collapse
Did U overwrite LGMOBILEAX folder was stated and (step 2). Did U edit hosts file as stated (step 3=
In my case i previously have a black screen, nothing more, but connecting phone to PC while pressing both volum keys aloud PC to recognice the phone.
If U receive extraction error that means that the patch is wrong. Do not press anything more in the program There is no need to
Fuguets said:
I did that, while i use the KDZ one minute after start unpacking the file, it shows the error message and finish the procces. I don't know if is that what you were asking.
When I tried the button Read Phone Information, it tells me Emergency Not Support Batt Level Check.
Is that the problem ?
Click to expand...
Click to collapse
I did not overwrite that folder, maybe we are looking for different guides because if that was something that i supose to do i didn't saw that on the guide.
I did not edit hosts file.
I restarted the computer now again, and now my message is: device not found.
Can you place the link of exacly guide i need to look ? Couse the link you send me before has a various of them.
ErnestoD said:
Did U overwrite LGMOBILEAX folder was stated and (step 2). Did U edit hosts file as stated (step 3=
In my case i previously have a black screen, nothing more, but connecting phone to PC while pressing both volum keys aloud PC to recognice the phone.
If U receive extraction error that means that the patch is wrong. Do not press anything more in the program There is no need to
Click to expand...
Click to collapse
http://www.htcmania.com/showthread.php?t=802175
Remenber to start from zero
Tested on WIN7 64 bits
ErnestoD said:
http://www.htcmania.com/showthread.php?t=802175
Remenber to start from zero
Tested on WIN7 64 bits
Click to expand...
Click to collapse
Helo again, i just finish the proccess now. Again i got the same message, I attached the log file, if you please have a look on that i appreciate.
I don't know, all the problem looks to be batterys fault. I hope not. Thanks.
Edit1: I foun this guide, do you think it could help me ?
But I didn't understand that well, looks like I need to be able to start the OS of the phone, which i can't.
Im sad to hear that , This is beyond my knowledge. It worked for me but...
Fuguets said:
Helo again, i just finish the proccess now. Again i got the same message, I attached the log file, if you please have a look on that i appreciate.
I don't know, all the problem looks to be batterys fault. I hope not. Thanks.
Click to expand...
Click to collapse
ErnestoD said:
Im sad to hear that , This is beyond my knowledge. It worked for me but...
Click to expand...
Click to collapse
What about my edit, where i found that someone said it solve the problem on 15%, do you think it could work ?
I just don't understant well, do I need to be able to start my phone rom ? Or i can do on my situation ?
Hello guys,
I am so happy that I wanted to share this with you. As I still have headache from googling how to flash back your stock rom (which didn't work out because the flash tool gave an error every time at 15%), I can save you a lot of headache with this very very simple fix.
For some people the tool works just fine, but when you have some google bootloader or a newer freegee unlocked one and you want back to stock, lots of people cant follow this thread because of the error at 15%.
The fix is EASY and I found it on the Optimus L9 section, thanks to that guy on XDA.
Follow exactly Davevinci's great thread except for one thing:
http://forum.xda-developers.com/show....php?t=2498102
Step 4 is now:
4.GO TO DOWNLOAD MODE POW+BOTH VOL BUTTON PRESSED+CONNECT USB
But step 4 should be:
- Boot up your phone in any stock based rom, for example SAVVY Rom V5
- Enable USB debugging and connect your phone through USB using the LG PC Suite option (make sure to kill PC suite in tast manager).
Now you should see the driver installation of LGE Android MTP device as usual and then just run the flash tool from the guide. Also de mode DIAG is now the right one. The flashtool will reboot your phone to download mode automatically when it's needed.
Still an error? Don't worry, disable virus scanner and firewall and just reconnect your phone. I got an error one time, during flashing, but I followed the steps the flashtool suggested me and now everything went fine.
Click to expand...
Click to collapse
The link U provide is not working and U didnt upload any log, I didnt see it.
As I read to perform that action u must be able to turn on your phone.
Did U try to flash a smaller then 1gb kdz or try another ones.
As U can see U wont receive to much help in LG forum. There are good guides but on time help is another thing.
Did U try this guide (method 1): http://forum.xda-developers.com/showthread.php?t=2667398
Is your phone properly detected in your PC?
Fuguets said:
What about my edit, where i found that someone said it solve the problem on 15%, do you think it could work ?
I just don't understant well, do I need to be able to start my phone rom ? Or i can do on my situation ?
Click to expand...
Click to collapse
I did not tried with a smaller archive because I can't download it. Among the Brazilian files I only can download the version 10D. I am on phone now but I will send the link that I'm trying asap. I really appreciate your help man. Even that I didn't found the solution yet is nice count with some experience help.
Enviado de meu XT1032 usando Tapatalk
Edit: From this list http://forum.xda-developers.com/showthread.php?t=2093382 , all brazilian links show Access Denied
And from here http://lg-phone-firmware.com/index.php?id_mod=20, only the V10D of Brazil.
I'm looking for the number 16, CLR/CLARO(BRAZIL) which is less than 1GB. Maybe i'm wrong, but when i clic on the name, a page of TNY shows a link of ADFLY that after i clic on close advertisement nothing happen.
About the method 1, I did try that, but sometimes it says "device not found" or "the system cannot find the patch specified". I'll try that from another computer, i let you know if i have some lucky. But the guy of the guide said:
!enable usb debugging
connect as MTP
follow the script"
Maybe its not for me.
Look what happen. (I'm using download mode)
*********************************************
* Tool Unlock BL Optimus G - Update 0414 *
* *
*********************************************
*** Select a number ***
1. UNLOCK BOOTLOADER
Seclect a number : 1
1. [Unlock] Optimus G JB 4.1.2 Selelct
Seclect a number : 1
FreeGee UNLOCK
Thanks to Team Codefire
1. JB 4.1.2
╣Seclect a Number : 1
1. KT
2. SKT
3. LGU+
╣Seclect a number : 1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
error: device not found
Unlock BL success.
╕Reboot [y]/[n] :
About my phone get propper detected, i guess it is, at least on my devices map it shows "Lg AndroidNet Phone"