Develop Bugs

Dutty's ROM locked my phone?

So...I've been using an older version of Dutty's ROM, but I haven't updated in a few weeks.
Tonight, out of nowhere, my phone will now only show a screen saying:
"This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers.
To obtain a newer release or further information, please revisit the web site that you used to obtain your current beta release."
Strange...
I tried downloading the most recent version of Dutty's rom and loading it, but the computer says "Cannot connect to your PDA phone..."
What's going on here!?
I have tried resetting the phone via the reset button (under the stylus), and I have tried restarting the phone via soft/hard reset, but nothing works!
Everytime my phone turns on, it goes immediately to this white page saying the "This concludes the beta test of this software release..."
How can I make my Diamond work again?!?
Please help!

i am having the same problem tonight too
i did a hard rest.. didnt fix it.. plus i lost all the stuff i had on there.. but it's ok
i heard u need to reflash it or something but i donno the full detail.. hope someone here can help us... thanks
step by step instruction would be great

I think you must put your diamond in "bootloader mode". and you will reflash your phone with a new rom, or another rom...
Booloader mode (usb) = Volume down + reset
In the screen (down) = serial, and if you connect with usb you can see "usb" and now you can reflash!

how can i reflash? i'm VERY new with this smartphone stuff my first smartphone so i donno a lot of stuff..
does it need HSPL 1.24? cause if it does i cant seem to run DiamondCustomRUU after my phone went black screen

i will try the "bootloader" mode, but i hope it works! i will post results a.s.a.p.!

Same for me on Dutty 2.3, but did hard reset and let phone set up. Do NOT change the date, I left mine as September, and phone will continue to set up and start. Now what I need to know is if I flash with latest rom will that allow me to set current date?

bigbro168 said:
how can i reflash? i'm VERY new with this smartphone stuff my first smartphone so i donno a lot of stuff..
does it need HSPL 1.24? cause if it does i cant seem to run DiamondCustomRUU after my phone went black screen
Click to expand...
Click to collapse
You put "volume down" and, in same time, you put "reset" (you hold these 3 seconds) => and you enter in bootloader, then you connect your diamond to USB and launch installation...
i think you don't need a HSPL if you want flash with the same rom... but you may use another HSPL for another rom...

OK - so i just started in Bootloader mode as suggested...
after that, i plugged it in to my computer vis USB.
then, i opened the most recent rom updater (supplied by dutty...see the thread in this forum).
it is currently updating, and everythign is looking good.
so, why do you have an experation on your rom's dutty??? what's up with that?!?

thanks fabe
but let say i want to flash the SwithBL Rom.. it's not the one i used b4.. do i still need HSPL? if yes how do i install so i dont get the black screen and it actually works?

theorie said:
OK - so i just started in Bootloader mode as suggested...
after that, i plugged it in to my computer vis USB.
then, i opened the most recent rom updater (supplied by dutty...see the thread in this forum).
it is currently updating, and everythign is looking good.
so, why do you have an experation on your rom's dutty??? what's up with that?!?
Click to expand...
Click to collapse
can u send me the pw for dutty's ROM? i cant seem to unzip it.. just wondering did u use HSPL?

bigbro168 said:
can u send me the pw for dutty's ROM? i cant seem to unzip it.. just wondering did u use HSPL?
Click to expand...
Click to collapse
i just downloaded & installed: V2.9_5_2_20275_RTM_Full_MSVC
http://rapidshare.com/files/162091111/Ruu_Signed_duttys_diamond__V2.9_5_2_20275_RTM_Full_MSVC.zip
the password is: Duttys V2.9 RTM Finale
i have HSPL installed.

bigbro168 said:
can u send me the pw for dutty's ROM? i cant seem to unzip it.. just wondering did u use HSPL?
Click to expand...
Click to collapse
careful you might get banned. see dutty's thread.

We have a thread for dutty's ROM. Please discuss there!

[Q] Flashed CMDA Hard SPL to a GSM Diamond

MOD EDIT: Can you help, I flashed my GSM diamond with the CDMA hard SPL from PPCGeeks: http://forum.ppcgeeks.com/showthread.php?t=36062
i try to unlock my htc diamond using solution
Code:
FIRST AND MOST INPORTANT!!!
U guys MUST have HardSPL INSTALLED on ur phones BEFORE trying anything of this out...
I Suggest u use HArdSPL 1.40 Unsigned (Its in the RAR file)
AFTER u have installed HardSPL 1.40 Unsigned
Unrar and go to step 2 folder and run -> DiamonCustomRUU.exe
Just do what it says and update.
After the phone restart copy DiamUnlock.exe from the step3 folder on to your diamond
(Anywhere) and run it.
The DiamUnlock.exe closes itself very fast, i have sucessfully made it by first launching the
program and quickly and several times press up button and touch the screen
if you'r lucky the screen stay and you can sim-unlock your diamond!!
the problem that phone came in step 2 after 100% write , it show error 262
any solution thx

Please post in the thread where you got it from!
You'll get an answer, and there will be fewer threads lying around here!

i don't understand what do u mean by this ?

now i use solution from
http://forum.ppcgeeks.com/showthread.php?t=36062
after write rom my htc is totaly dead can't power on
any solution to recover it

hbstun said:
i try to unlock my htc diamond using solution
Code:
FIRST AND MOST INPORTANT!!!
U guys MUST have HardSPL INSTALLED on ur phones BEFORE trying anything of this out...
I Suggest u use HArdSPL 1.40 Unsigned (Its in the RAR file)
AFTER u have installed HardSPL 1.40 Unsigned
Unrar and go to step 2 folder and run -> DiamonCustomRUU.exe
Just do what it says and update.
After the phone restart copy DiamUnlock.exe from the step3 folder on to your diamond
(Anywhere) and run it.
The DiamUnlock.exe closes itself very fast, i have sucessfully made it by first launching the
program and quickly and several times press up button and touch the screen
if you'r lucky the screen stay and you can sim-unlock your diamond!!
the problem that phone came in step 2 after 100% write , it show error 262
any solution thx
Click to expand...
Click to collapse
He means you should ask in the thread where you found this information above.
Code:
First and foremost...

ah ! ok
i don't remember when i found it
but now my htc is totaly dead , how i can recover it ?

hbstun said:
ah ! ok
i don't remember when i found it
but now my htc is totaly dead , how i can recover it ?
Click to expand...
Click to collapse
I am not sure you can.
Does it go into bootloader mode? If not, might be JTAG is your only option.

When you say 'totally dead' do you mean you get absolutely nothing when you try plugging in the usb cable ?
Logically as soon as you plug in the cable it'll power on into the tri-colour screen.
It'll do this even if you remove the battery.

aE3-ink said:
When you say 'totally dead' do you mean you get absolutely nothing when you try plugging in the usb cable ?
Logically as soon as you plug in the cable it'll power on into the tri-colour screen.
It'll do this even if you remove the battery.
Click to expand...
Click to collapse
nothing hen i put usb cable nothing in the screen

Kevbodian said:
I am not sure you can.
Does it go into bootloader mode? If not, might be JTAG is your only option.
Click to expand...
Click to collapse
what do u mean by jtag and how i can do it ?

<mod mode>
Please stop spamming the forum with requests for Help and I have updated the title of this post so that it may get more attention.
</mod mode>
JTagging can be done using QMAT, if need be.
Before that, can you put your Diamond into the Bootloader or not ??
Thanks
Dave

Serves you right for using a leaked unlocker program - Should have gone here . thanks to Olipro as the leaked version was buggy.
I do hope you get this fixed though. (I would help if I could really).

DaveShaw said:
<mod mode>
Please stop spamming the forum with requests for Help and I have updated the title of this post so that it may get more attention.
</mod mode>
JTagging can be done using QMAT, if need be.
Before that, can you put your Diamond into the Bootloader or not ??
Thanks
Dave
Click to expand...
Click to collapse
can't enter bootloader ?

hbstun said:
can't enter bootloader ?
Click to expand...
Click to collapse
In that case I suggest you PM ViperBJK and as him nicely to look at the thread...
He's the main man on JTAG'ing.
Thanks
Dave

DaveShaw said:
In that case I suggest you PM ViperBJK and as him nicely to look at the thread...
He's the main man on JTAG'ing.
Thanks
Dave
Click to expand...
Click to collapse
ok thx anyway for your help

R3PUBL1K said:
Serves you right for using a leaked unlocker program - no sympathy or help from me.
Should have gone here thanks to Olipro as the leaked version was buggy
Click to expand...
Click to collapse
I think he tried the unlock before he flashed the cdma hardspl.

Kevbodian said:
I think he tried the unlock before he flashed the cdma hardspl.
Click to expand...
Click to collapse
yes i tried unlock but failed
i found rom in some website and i flashed it to my phone
but now it dead

You must eter in "USB Trigger Mode"
hbstun said:
yes i tried unlock but failed
i found rom in some website and i flashed it to my phone
but now it dead
Click to expand...
Click to collapse
I think I can help you ...
Just this **** happened to me too ... because I did not read carefully ROM-destination, but we resolved the issue after a couple, three hours of bloody despair ...
Be sure before you get to work, you already have prepared a full ROM image (....nbh) for your Diamond, that is to contain radio too. If you do not have a full version, download a full version first and make sure that contains both ROM and Radio.
1. Take cover behind the phone
2. USB link cable to the computer and phone
3. Open the phone
4. Enter bootloader mode as follows:
Keep the volume down key and click with the stylus reset button (red button which is located behind the device ) for 3-4 seconds in the same time with the volume down key, then you can get out your stylus, and continued to keep volume down key, until the bootloades screen appears, now you can release the volume key down too.
And now, just simply launch DiamonCustomRUU.exe to start your flash, using a file manager, and is ready ... you have a new phone!
I hope I was helpful ...

kokocf said:
I think I can help you ...
Just this **** happened to me too ... because I did not read carefully ROM-destination, but we resolved the issue after a couple, three hours of bloody despair ...
Be sure before you get to work, you already have prepared a full ROM image (....nbh) for your Diamond, that is to contain radio too. If you do not have a full version, download a full version first and make sure that contains both ROM and Radio.
1. Take cover behind the phone
2. USB link cable to the computer and phone
3. Open the phone
4. Enter bootloader mode as follows:
Keep the volume down key and click with the stylus reset button (red button which is located behind the device ) for 3-4 seconds in the same time with the volume down key, then you can get out your stylus, and continued to keep volume down key, until the bootloades screen appears, now you can release the volume key down too.
And now, just simply launch DiamonCustomRUU.exe to start your flash, using a file manager, and is ready ... you have a new phone!
I hope I was helpful ...
Click to expand...
Click to collapse
can't enter bootloader like u sad !

hbstun said:
can't enter bootloader like u sad !
Click to expand...
Click to collapse
Hello there! Where have you blocked, exactly ...?

HardSPL... 0%?!

Hiya XDA
I've been trying all evening to get any HardSPL onto my Diamond without success, everytime I try I get to 0% and after a few minutes "error [260] connection" and the phone keeps its' black screen until I soft-reset it.
Can anyone help me get a hardspl onto my phone? I would really like to try WM6.5. I've read many SPL-guides already, so you don't have to point me to them
(even that on modmydiamond.info)
Thanks in advance!

esset said:
Hiya XDA
I've been trying all evening to get any HardSPL onto my Diamond without success, everytime I try I get to 0% and after a few minutes "error [260] connection" and the phone keeps its' black screen until I soft-reset it.
Can anyone help me get a hardspl onto my phone? I would really like to try WM6.5. I've read many SPL-guides already, so you don't have to point me to them
(even that on modmydiamond.info)
Thanks in advance!
Click to expand...
Click to collapse
Here's the Tutorial and here's the Troubleshooter. They're both stickies. Please search and read before posting.

Thanks for the quick response, but as I said. I've read all stickies and guides, and it's still stuck at 0%.

esset said:
Thanks for the quick response, but as I said. I've read all stickies and guides, and it's still stuck at 0%.
Click to expand...
Click to collapse
Did you let your device sync with Activesync/Windows Mobile Device Center?
Try recreating the sync pairing.
Try uninstalling the device from PC's Device Manager and reinstalling it and then try recreating the sync partnership.
Try another USB port.

Yes, yes, yes and yes. I even tried doing it on my laptop.
Edit: I even tried flashing down to 1.93 with HTCs official stuff, no success there either

esset said:
Yes, yes, yes and yes. I even tried doing it on my laptop.
Edit: I even tried flashing down to 1.93 with HTCs official stuff, no success there either
Click to expand...
Click to collapse
Another USB cable?
Try manually entering bootloader and connect to PC. The label should say USB not Serial and try from there.

esset,
May I ask what branding/model of the Diamond you own?
I own a pure AT&T model just purchased a week or two ago. And, so far I've also had almost zero luck flashing it. I'm moving from an AT&T Tilt which I've flashed so many times, the USB port is starting to wear down. I've also got a lot of experience with many small computing devices with all types of weird programming and flashing routines, so I'm not a newbie. But the AT&T Fuze just seems to be locked in a way that has yet to be covered by the good XDA folks here. Heck, I can't even dump the shipped ROM off the device to send it here for checking out by the developers. All I've been able to do is flash an odd 1.90 HardSPL that seems to have locked the phone even tighter than before. YUCK!
If you're in this same scenario, I'd suggest patience. Eventually someone with enough knowledge of these devices will be able to help out. It is frustrating though, after flashing the other phone so many times with so many different configurations to be held back on the new one.

tnyynt said:
Try manually entering bootloader and connect to PC. The label should say USB not Serial and try from there.
Click to expand...
Click to collapse
You might find this odd. The down-volume + back arrow key combo doesn't seem to work with some of the new versions of the Diamond. I've tried on two of them, and neither respond to this key combo at startup.
Many times entering the bootloader is not a problem though. The routine does cause the phone to go there. And, I can get it there by other means. Just not via the boot up sequence. This tells me there is something very different about these models....

I tried starting and flashing directly from the bootloader (showing USB), and the phone got to show a percentage field (the one when you are flashing) but same here, is constantly at 0% until the flashing utility times out and tells me to reboot my phone and guides me through steps if it has been semi-bricked (bootloader is the volume down + softreset, right?)
I bought my phone in the first shipment to Sweden, it's not locked to any company, bought it without subscription
Else I just flashed it up to latest ROM from htc.com (still no success with HardSPL ) to 2.03.413.2 SVE (02/06/09)
Radio: 1.09.25.23
Version: 52.51.25.26H
ninjaedit: (In the four-colored bootloader thing it says DIAM100 64M SPL-2.03.0000 MicroP-Diam (LED) v11)
Tell me if you need any other info :]

Here's another indication that the new phones are different. I've copied a DIAMIMG.nbh file to both a flash card inside the phone, and to it's internal memory. (sorry, but the thread on that location is confusing on what memory. I assume like most phones of the past that it's supposed to be the flash card, but "internal memory" is not a flash card.) But, the loader screen always responds with "no image file" when it's called up. So, is there a different name expected now?

put manual hardspl into your device, and click to it from your device..

zerocool81 said:
put manual hardspl into your device, and click to it from your device..
Click to expand...
Click to collapse
Tried that with every Hard-SPL linked to from this thread: http://forum.xda-developers.com/showthread.php?t=415191
Didn't work
Something's changed.

zerocool81 said:
put manual hardspl into your device, and click to it from your device..
Click to expand...
Click to collapse
Hi uhm, was that answer aimed for me or to scottwilkins?
If it was for me, is it possible to flash the mobile directly from the memory-card (or internal flash card)? Else if you mean the "manual make-the-screen-black-and-go-to-bootloader" my screen just goes blank, as when you do it with the RUU, and just stops there. Also seems like it looses the connection via USB doing so too. And flashing through the bootloader directly (volume down at softreset) shows the progressbar on the phone, but steadily at 0% (when trying to flash).

search and download
a) SDA_ApplicationUnlock.exe (Desktopprogram)
b) EnterBootloader.exe (ATTENTION: it must be that for diamond, normaly find by flashing-tools)
connect with active sync and copy EnterBootloader.exe to pda-root.
start SDA_ApplicationUnlock.exe on desktop and follow all but reset (DONT RESET)
start EnterBootloader.exe on pda
if bootloader-Mode and USB-Label than start flashing
wait for response

scottwilkins said:
Tried that with every Hard-SPL linked to from this thread: http://forum.xda-developers.com/showthread.php?t=415191
Didn't work
Something's changed.
Click to expand...
Click to collapse
try this.. put this file into internal storage and lounch this from ppc
http://rapidshare.com/files/207721836/SSPL-Manual.rar

okokur said:
search and download
a) SDA_ApplicationUnlock.exe (Desktopprogram)
b) EnterBootloader.exe (ATTENTION: it must be that for diamond, normaly find by flashing-tools)
connect with active sync and copy EnterBootloader.exe to pda-root.
start SDA_ApplicationUnlock.exe on desktop and follow all but reset (DONT RESET)
start EnterBootloader.exe on pda
if bootloader-Mode and USB-Label than start flashing
wait for response
Click to expand...
Click to collapse
I tried what you suggested, I successfully unlocked the phone (and did Not reboot it). Ran the bootloader; and the screen just went black, as usually, and nothing more happens

zerocool81 said:
try this.. put this file into internal storage and lounch this from ppc
http://rapidshare.com/files/207721836/SSPL-Manual.rar
Click to expand...
Click to collapse
That program makes the Fuze screen just turn black and do nothing. Cool, huh
Seems that the newer stock ROMS might be blocking something... hmmmm....

Well, crap!
I just figure out where my whole problem is...
The Fuze (my phone) = The Raphael
NOT the Diamond.
I just scrolled down the forum list, saw a phone that looked like mine and went there. DOH!
I feel like a total dumb-ass.
If I'd scrolled just a bit farther down the XDA forum, then I'd seen the Raphael phone.
Holy Cow! Go ahead, say it, I deserve it...
Thanks for all the help otherwise. It was a learning experience for me....

esset said:
I tried what you suggested, I successfully unlocked the phone (and did Not reboot it). Ran the bootloader; and the screen just went black, as usually, and nothing more happens
Click to expand...
Click to collapse
hi,
i think, you have the wrong bootloader.
i find this and try it by me self. this brings your fone definitly to bootloader.
than you can start manualy the hard spl by normal description way.
http://rapidshare.com/files/208123046/EnterBootloader.exe.html

okokur said:
hi,
i think, you have the wrong bootloader.
i find this and try it by me self. this brings your fone definitly to bootloader.
than you can start manualy the hard spl by normal description way.
http://rapidshare.com/files/208123046/EnterBootloader.exe.html
Click to expand...
Click to collapse
Thanks, but that file takes me into the bootloader, and when I start flashing the percentage is still at 0% until the software times out. Same as before, just the usual "going-into-the-bootloader".

How to flash my HTC Touch pro 2 (sprint)

Hi everyone well I'm new to the flashing and dont want to jump any steps as this could possible brick my phone...
I've been having some problems with flashing as i cant find a step by step to flashing my HTC TP2. I've managed to do the RhodiumW Hard-SPL package but after trying to flash to some custom RUU's the installation seems to go fine its not until the phone first boots up, that's when the phone just hangs on the HTC splash screen
From there i cant do anything other then boot up to the tricolor bootloader screen and re-install the original 2.04.651.4 update!
can someone tell me what im missing to be able to flash my HTC correctly, or at least point me in the right direction?
Thank you in advance!!!

step 1
http://member.america.htc.com/download/RomCode/HTC Touch Pro2 (Sprint)/HTC Touch PRO2 MR1.exe
step 2
http://rhodiumw.htc-unlocks.com/hard-spl.php
step 3
http://www.mightyrom.com/mightyrom/touch-pro-2/

Hey Tommy many thanks for the post. I just upgraded my phone and peeling through the information overload, however you direct link does not work for step 1. I want to make sure that I am running the correct piece of software that you recommending. Could you please list the title for that file?

Nevermind I was able to find it via a mirror site.
Back into lurker status for now
Thanks

alright so i was able to install they mightyrom on my phone that went well my phone didnt freeze and everything started the way it should have.
but does that mean i can now flash my phone to other for example "leo cell" or Bxsteez Rhodium" if not how do i get to that point cuz when ever i flas them to they just freese on the white splash screen with the HTC logo in green letters!!
Thanks!

If you have installed Hard SPL then use the sd card method.
1. Format the sd card FAT32 ( they come FAT default) and copy the rom's .nbh file onto it. Rename to Rhodimg.nbh .
2. Insert sd card back into powered off Rhodium. Go into bootloader by pushing down volume and power.
3. If you did it properly and Hard SPL is on your phone then it should say to press power to update os...
If you aren't sure if you have Hard SPL then go to bootloader without the sd card in there, it should say SPL - 0.85.Olinex if you have Hard SPL, anything else won't register the flash file.
Cheers...

OK I was able to update to Winmo 6.5 with no issues....but here is my questions with regards to the Rhodium_W Hard-SPL
I was attempting to run it and it never gets pass 0%...In reading the details of the install instructions it reads
"the device needs to be connected to Activesync or WMDC via USB cable. and it must not be in Flight/Airplane mode (i.e. the phone part should be on).
3) internet access is required as the program checks online for updates and for the license."
Click to expand...
Click to collapse
I have yet to activate my phone with Sprint could this be my error that I need to active my phone? I wanted to have the phone flashed and customized before activating.

signalsoldier said:
OK I was able to update to Winmo 6.5 with no issues....but here is my questions with regards to the Rhodium_W Hard-SPL
I was attempting to run it and it never gets pass 0%...In reading the details of the install instructions it reads
I have yet to activate my phone with Sprint could this be my error that I need to active my phone? I wanted to have the phone flashed and customized before activating.
Click to expand...
Click to collapse
I think you should ask this in the hard spl thread in the cmda section...That is the place for those questions Assuming that you have a cdma phone because you did not mention it. Otherwise check the hard spl thread in the gsm section.

Heading that way thanks for the directions mate!

Alright so ive been able to flash my rom to my first custom rom by energy which i like very much, although still a noob, i want to flash it to a different rom
What is the best way to flash to a different rom with out leaving any files behind that would affect the new rom?!
do i have to do a hard reset or something that would clear my phone from any old files?!

htcru7 said:
Alright so ive been able to flash my rom to my first custom rom by energy which i like very much, although still a noob, i want to flash it to a different rom
What is the best way to flash to a different rom with out leaving any files behind that would affect the new rom?!
do i have to do a hard reset or something that would clear my phone from any old files?!
Click to expand...
Click to collapse
Just flash away

LOL alright thanks i guess im just paranoid but thanks i'll "flash away"

Lock
When you start Rhodium_CDMA_HardSPL_V1_10R3_100HSPL stoppers on 0%.
I removed the firmware via mtty 1.42 entering the command: task 28 \ task 29. Ie fully formatnul system. This is often applied to remove the lock on the HTC 6800. At this time nothing worked. Under bootloger any firmware stoppers on 0%. Besides, even the official RUU_Rhodium_W_S2_Sprint_WWE_2.04.651.4_RS_2.32.00WF_NV_SPCS_2.20_0224_PRL60660_S
hip
and HTC Touch PRO2 MR1 from the official portal hangs at 1%, then is restarted Device, and as expected if there is no OSes lit logo HTC ...
What should I do?? If GSM is blocked, how do I remove it to flash?
Ps Is it possible to disable the lock on the firmware via mtty
1.42??
Thank you very much for your answer!

Scream-krg said:
When you start Rhodium_CDMA_HardSPL_V1_10R3_100HSPL stoppers on 0%.
I removed the firmware via mtty 1.42 entering the command: task 28 \ task 29. Ie fully formatnul system. This is often applied to remove the lock on the HTC 6800. At this time nothing worked. Under bootloger any firmware stoppers on 0%. Besides, even the official RUU_Rhodium_W_S2_Sprint_WWE_2.04.651.4_RS_2.32.00WF_NV_SPCS_2.20_0224_PRL60660_S
hip
and HTC Touch PRO2 MR1 from the official portal hangs at 1%, then is restarted Device, and as expected if there is no OSes lit logo HTC ...
What should I do?? If GSM is blocked, how do I remove it to flash?
Ps Is it possible to disable the lock on the firmware via mtty
1.42??
Thank you very much for your answer!
Click to expand...
Click to collapse
the Hard-SPL will only work if you booted windows mobile. you have to sync the phone in windows mobile to the PC.

is there other way to get through in hard spl because i dont have any account for example, paypal...... http://media.xda-developers.com/images/icons/icon9.gif

chrisjavier666 said:
is there other way to get through in hard spl because i dont have any account for example, paypal......
Click to expand...
Click to collapse
Hard SPL is free for non-commercial users.

my tp2 is bricked
i tried to upgrade my htc touch pro 2's rom. i received error 226 and anytime i switch it on, it gets to the tricolor boot and displays a lot of info and says try again. Can anyone please help me?

nastyrock said:
i tried to upgrade my htc touch pro 2's rom. i received error 226 and anytime i switch it on, it gets to the tricolor boot and displays a lot of info and says try again. Can anyone please help me?
Click to expand...
Click to collapse
Did you try flashing the stock ROM? It's always a good idea to try that if you think there's no hope. It flashes everything.
Also, did you try task29?

Trinity Stuck!!

After doing soft reset to my htc trinity it gave me black screen and nothing than this...tried flashing new rom i entered boot loader and flashed correctly but after it finished flashing and reset it gave me black screen also tried different roms but same proplem
Can Anyone help?!!

Hai...! I am not expert on this stuff . may the other can give you a good solution to solve your problem. Did you try to hard reset your device or do hard SPL before flashing? if you didn't do the Hard SPL that's the problems. Some one said to fix the broken Trinity with JTAG Solution, be careful to do this.
See for the thread about JTAG to unbrick your Trinity on this forum.
Hope it will help you...

hmmm..i use olipro 1.30 hard spl,,,but i am wondering why just it cant be replaced by old spl?? and also using the JTAG solution seems dangerous alittle

EgyPharaoh said:
hmmm..i use olipro 1.30 hard spl,,,but i am wondering why just it cant be replaced by old spl?? and also using the JTAG solution seems dangerous alittle
Click to expand...
Click to collapse
Hi EgyPharaoh, Have you tried flashing back to the Stock OEM ROM yet? That will usually fix problems with a bad flash for me. You can find it HERE. I would not recommend looking into JTAG just yet.
If this does not work, let me know and we will research the next step.

SuperSport said:
Hi EgyPharaoh, Have you tried flashing back to the Stock OEM ROM yet? That will usually fix problems with a bad flash for me. You can find it HERE. I would not recommend looking into JTAG just yet.
If this does not work, let me know and we will research the next step.
Click to expand...
Click to collapse
I started flashig it but it reaches about 28% then gives me upate error [262]..but i flashed official htc rom "HTC [WWE] v1.23.405.2] with no errors and when i open it it shows the "htc image" and freezes.
and it says in the readme that if this error showed then it might be that the wince is destroyed or in upgrade mode...how to know now wether it is destroyed or in the upgrade mode??

EgyPharaoh said:
I started flashig it but it reaches about 28% then gives me upate error [262]..but i flashed official htc rom "HTC [WWE] v1.23.405.2] with no errors and when i open it it shows the "htc image" and freezes.
and it says in the readme that if this error showed then it might be that the wince is destroyed or in upgrade mode...how to know now wether it is destroyed or in the upgrade mode??
Click to expand...
Click to collapse
Sorry about the delay, and thank you for the PM reminder.
Try flashing directly from the BootLoader Screen, by holding both the Power and Camera Buttons while you press and release the Reset Button using your stylus. Continue to hold the Power and Camera Buttons until your phone enters bootloader.
If that does not work, try to flash using your SD Card.
Using either 7zip or WinRAR, extract the contents of the OEM ROM you downloaded earlier. You are looking for the RUU_signed.nbh file inside. If you prefer to just download it, you can find it HERE.
Rename the file from RUU_signed.nbh to TRINIMG.nbh and copy it to your SD Card. Don't place it in any folder, just in the Root of the Card. Place the SD Card back into your phone if it's not already.
Now, Enter Bootloader by holding both the Power and Camera Buttons while you press and release the Reset Button using your stylus. Continue to hold the Power and Camera Buttons until your phone enters bootloader. It should at this time start to flash the OEM ROM you copied earlier. Hopefully, this will be successful. If it is, it will have replaced your HardSPL ROM & Radio, so you will need to flash those again.
Let me know if this works or not.

SuperSport said:
Sorry about the delay, and thank you for the PM reminder.
Try flashing directly from the BootLoader Screen, by holding both the Power and Camera Buttons while you press and release the Reset Button using your stylus. Continue to hold the Power and Camera Buttons until your phone enters bootloader.
If that does not work, try to flash using your SD Card.
Using either 7zip or WinRAR, extract the contents of the OEM ROM you downloaded earlier. You are looking for the RUU_signed.nbh file inside. If you prefer to just download it, you can find it HERE.
Rename the file from RUU_signed.nbh to TRINIMG.nbh and copy it to your SD Card. Don't place it in any folder, just in the Root of the Card. Place the SD Card back into your phone if it's not already.
Now, Enter Bootloader by holding both the Power and Camera Buttons while you press and release the Reset Button using your stylus. Continue to hold the Power and Camera Buttons until your phone enters bootloader. It should at this time start to flash the OEM ROM you copied earlier. Hopefully, this will be successful. If it is, it will have replaced your HardSPL ROM & Radio, so you will need to flash those again.
Let me know if this works or not.
Click to expand...
Click to collapse
Thanks For your solution but it didn't work
i did all what u said and that's what happened :-
TRINIMG.nbh
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM -
GSM -
Update In Progress...
and that's all it stops at the first..i read in another thread about flashing from sd card and it said that it may stop for a while but it stops forever
Next Step

TRINITY BACK!!! xD
YEAAAAH I DID IT
well supersport, thanks alot for your help...it helped me alot
the nbh file of the dopodasia rom u gave me didnot work so i tried the same thing but with the old rom i have, the "Htc official rom v1.23.405.2" i took the file named "TRINIMG_HTC_WWE_1.23.405.2_Ship.nbh" and renamed it to "TRINIMG.nbh" then put it in my sd card ..and flashed it and update succeeded and my trinity now works good..thank you and anyone helped in this thread

EgyPharaoh said:
YEAAAAH I DID IT
well supersport, thanks alot for your help...it helped me alot
the nbh file of the dopodasia rom u gave me didnot work so i tried the same thing but with the old rom i have, the "Htc official rom v1.23.405.2" i took the file named "TRINIMG_HTC_WWE_1.23.405.2_Ship.nbh" and renamed it to "TRINIMG.nbh" then put it in my sd card ..and flashed it and update succeeded and my trinity now works good..thank you and anyone helped in this thread
Click to expand...
Click to collapse
Awesome, glad to hear it worked. Remember, you will need to Flash HardSPL again if you want to flash Custom ROMs again, and also an updated Radio if you prefer.

SuperSport said:
Awesome, glad to hear it worked. Remember, you will need to Flash HardSPL again if you want to flash Custom ROMs again, and also an updated Radio if you prefer.
Click to expand...
Click to collapse
but i found that my radio & hardspl didnt change.

EgyPharaoh said:
but i found that my radio & hardspl didnt change.
Click to expand...
Click to collapse
Then you are fine. I guess you have an OEM ROM that has the HSPL and Radio stripped out of it.