hello guys,
after a long research i landed to this forum at last.
today morning i had a client who wanted to have new rom on his tp2 with russian language. but unfortunatly i flashed the tp2 with a wrong flasher! first time hapening something like this... i was pretty sleepy that i didnt even recognised that it was the wrong one... and now the client wants his phone back but the phone dosnt even turn on and not going in the boot menu... only when i plug the usb cable to the pc with the tp2, the pc recognises that there is a usb connected.. but only this.. im really stuck in a bad situation i would be very appreciative if someone can help me with this out the client will come tomorrow again, i hope there is some options to get the tp2 back alive
Try to flash back with stock, but depending on what you've flashed, it might very well be bricked.
This is why you should always be careful as to pay attention to what you are flashing.
Did you apply the wrong hSPL, or the wrong ROM? Did you flash something meant for a CDMA device on a GSM device...? Please, explain exactly what you have done.
Firstly thank you very much for your answer. I apply the wrong hSPL. HardSPLWrapper_Blackstone i used, the hSPL from blackstone >.< ..my device is htc touch pro 2 Sprint . It much be CDMA but with Gsm radio as far i know. actually the progress didnt start.. there were not a loading bar and no boot mode on phone screen (green-blue-red). suddenly phone turned off and red service light turned on.now when i connect it to pc,i hear usb connected sound and the pc reads the phone as ''qualcomm cdma tecnologies msm'' and requests driver for it.
Does anyone have a clue if there is a solution or what i can do ? or even if there is no way to fix it, except with Jtag ? :S
yildizgsm said:
Does anyone have a clue if there is a solution or what i can do ? or even if there is no way to fix it, except with Jtag ? :S
Click to expand...
Click to collapse
You flashed a RHOD with hSPL for BLAC. That's pretty blatant mistake dude.
I'm not sure if there's a way back. Try flashing stock like I already suggested. Try relocking too, I don't know.
You might have to go into mtty, erase everything, flash the radio, then flash stock. Next time, be more careful.
I would flash it back to stock but the problem is that i need to get activesync with the phone.. my pc dosnt connect to the phone with activesync because i cant open the phone :S do you think with mtty it could work mate ? im gonna search for that now.. thanks
yildizgsm said:
I would flash it back to stock but the problem is that i need to get activesync with the phone.. my pc dosnt connect to the phone with activesync because i cant open the phone :S do you think with mtty it could work mate ? im gonna search for that now.. thanks
Click to expand...
Click to collapse
Try flashing via SD?
yildizgsm said:
Firstly thank you very much for your answer. I apply the wrong hSPL. HardSPLWrapper_Blackstone i used, the hSPL from blackstone >.< ..my device is htc touch pro 2 Sprint . It much be CDMA but with Gsm radio as far i know. actually the progress didnt start.. there were not a loading bar and no boot mode on phone screen (green-blue-red). suddenly phone turned off and red service light turned on.now when i connect it to pc,i hear usb connected sound and the pc reads the phone as ''qualcomm cdma tecnologies msm'' and requests driver for it.
Click to expand...
Click to collapse
HardSpl doesn't show a progress bar when flashed. Can you manually put the phone in bootloader mode (Press volume down button and power it up)?
If you can get it into bootloader what does it show on the screen? You may be able to flash the shipped rom after you are in bootloader if when you connect to your PC it says USB toward the bottom of the bootloader screen and then click on the exe for the shipped rom on your PC. Or maybe try flashing the re-locker as suggested earlier to see if you can install the correct SPL.
i cant get bootloader mode(volum-,power up).im gonna try flash via sd if no succes then gonna try relocker ...i'll post result..
i cant get bootloader mode(volum-,power up).im gonna try flash via sd if no succes then gonna try relocker ...i'll post result..
Click to expand...
Click to collapse
If you flashed the wrong HSPL then you have bricked the device. There is no recovery outside of a jtag box. I don't know of anyone who has made one of those fora Rhodium anyway. It sounds like you owe your client some money.
By the way, if you can't get into the bootloader, then you can't flash via SD.
cajunflavoredbob said:
If you flashed the wrong HSPL then you have bricked the device. There is no recovery outside of a jtag box. I don't know of anyone who has made one of those fora Rhodium anyway. It sounds like you owe your client some money.
By the way, if you can't get into the bootloader, then you can't flash via SD.
Click to expand...
Click to collapse
Indeed, and a great way to end the thread.
Related
I follow instruction in http://forum.xda-developers.com/showthread.php?t=313486 but after hardreset.
My p800w is stuck in T-Mobile logo and version number. It can't continue booting up to windows mobile.
Question: How to flash ROM without ActiveSync?
How to recovery my Artemis?
Welcome any advice,
Thanks in advance.
Yea me to, mine is now a brick after that upgrade? No active sync connection possible and all I get now is the blue O2 start screen after the hard reset with the red writing and numbers in the top left hand corner..
Phone is an UK XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
HELP!!!!!!!
yeah, I had the same problem and have created a thread for it already. unfortunately I got no useful replies, and it seems that I am stuck waiting for an official o2 ROM so that I can recover my Orbit.
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
motomob said:
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
Click to expand...
Click to collapse
I read in here that you hold the voice button and soft reset.
Decaf said:
I read in here that you hold the voice button and soft reset.
Click to expand...
Click to collapse
Correct and use mtty
Already see in the forum ....
Thanks guys and apologies for the spelling..I ran the Artemis_USPL before I tried upgrading to WM6 and again have been able to run it after with my new brick now with the phone in bootloader mode but still when I try and run the german ROM update a) it will only work with the german file which freezes @ 3%? This seems to be a known problem reading around and b )when I replace it with the smaller ROM file, 54MB the german one is 66MB, I originally tried to use it doesn't read the ROM file or the update utility doesn't want to read it. I reckon I might be able to get it back if I can get one of the ROM update utilities to read a good ROm file and send it to the phone.
I can;t find this MTTY program to sniff the USB port and return the code of if the USPL util wokred as I think that could be key to all of this.
Can anyone post a quick how to here for
1) install MTTY from somewhere
2) what command to run agaist the phoen to see if the USPL util worked and what values I should be looking for
3) another WM6 ROM version (that the update utils can read) download location I can download from to try and send to the phone using the German update util
Not asking for much am I but I desperately need my phone back WM5 or 6 in the next day or so so really can't send it off.
Thanks
Error message I recive at the 3% stage when using the German ROM and english update util.
use the file attach and read that :
http://forum.xda-developers.com/showthread.php?t=285112
Thanks but I'm not that cleud up on what commands I'm meant to be sending. It works in Bootloader mode I ge a response from the phone by send it a command. But even if I get a response telling me what the CID status is its not much help as I think ti shoudl have tekane BEBEs ROM by now as I've got the german ROMUpdateUtility sending that 54,272KB file to the phone but it stops after 3%. What are my options?
motomob said:
But even if I get a response telling me what the CID status is its not much help as I think
Click to expand...
Click to collapse
That's right. On older models MTTY was quite useful, but not on the Artemis. You cannot use it to read the CID status anyway. If you are not sure about the status, run the USPL tool, just to make sure.
I've already re run the USPL ROMUpdateUtility and it completes 100% okay in bootloader mode. But after I hard reset and then try and flash the WM6 BEBE ROM or any ROM German etc back onto it it either fails with the error code I posted up earlier or gets to 3% and fails.
What are my options at this stage? Does anyone have a link to another ROM I can try like the original WM5 O2 ROM or any other WM6 ROm that might work. I'm willing to give them all a try as it's just a useless phone right now and I haven;t sent it off as 1) I need it before the weekend and 2) As I can flash some ROMs with the USPL and others have done this no problem I really feel there must be a solution as I can still falsh the phone.
What can I say RTFM... I did it all right and I didn't have a brick, I missed out one small detail... loading on the ROM with the extended ROM. All now running and it does seem a little faster than WM5.
Thank you to all those that tried to help out. To the others that are still having probs.. Don't try and run the update in the middle of a busy day in the office whilst trying to manage 100 other things meaning you are probably missing out a line like me...
One question though how do I get back my O2 power and storage meters on the today screen back as I liked them and the WiFi seems to have a bug where when it is enabled and you click on the WiFi symbol up the top it only allows you to switch it on, when it is already on.. so you have to open up the COMM manager to switch it off.
So how did you fix it exactly? I have read this thread thoroughly and can't find out what you did!
ERROR[206] occurs while trying to update ROM to WM6
While tring to update ROM to WM6 on O2 XDA Orbit i encounter ERROR[206].
I wanted to attach the screen shot but dont know how to do that, but anyway what i am doing is i attached my pda to my pc via activesync using supplied usb cord. Everything goes well till i reach a screen where it says "You are now ready to update your ROM image...." and once i click next a progress bar apperas and my pda shuts and activesync exit's automatically and my pda tries to restart with RBG band and some text:RUU, IPL 1.25.0001, SPL 1.25.0000 and USB. And thats it after few seconds or a min i get the ERROR[206] and my pda hangs.
I dont know why Activesysn shutsdown ???
Just an additional in i want to tell that without installing activesync i am not able to connect/pair my pda with my pc. So do i need to install the drivers and then try or it doen't matter cause once i install Active sync i can connect the device.
Please help me with this....
Thanks
unable to load bootloader!!!!!!!!!!!!
HELP!!!!!!!!
I have HTC3300, tried to update rom, now its bricked. I tried to start bootloader by pressing the voicebutton and softreset but loads in t-mobile screen and hangs, im unable to start the bootloader.
Is this end of story or are there any other options to get the bootloader to start????
please help
Bootloader
I had a problem with my phone loaded touch flow 4 and cid unlocking, everything was fine then after a while it froze at boot up.
I look put the battery and did a hard reset, put it into bootloadeder mode, reflashed with a t-mobile rom does not need to be cid unlocked to do that.
Once origonal rom was working, cid unlock again, flashed back to touchflow 4.0 - sorted
Where did you got an tmobile rom from can you tell me. Mine is also freezing on booting almost once every day or so after I've upgraded to 4.0
i flashed nfsfans rom, everything went fine but when it restarted it just stays on the verizon bootscreen and wont let me do anything i think its bricked but im not really sure please help me ive tried soft resseting and removing the battery it still does the same thing i dnt know what to do
i had the same problem.. somebody said there was a fix i didnt find it, the problem was probably missing a step in using the unlocker, it asks you to unplug and replug the phone so it can close activesync, i didnt do it and ended up where you are.
i got annoyed after trying to find a fix for an hour or 2 and called verizon because i didnt buy insurance for it, luckily i was still in my year warrant the vogue comes with and they sent me a new 1, i just had to send them my broken one back
its not really bricked i dont think, but verizon couldnt get it to reset from their side so it's considered that way
ya but is obviously no under warrenty any more so what can I do to fix it????
bradsinram said:
i flashed nfsfans rom, everything went fine but when it restarted it just stays on the verizon bootscreen and wont let me do anything i think its bricked but im not really sure please help me ive tried soft resseting and removing the battery it still does the same thing i dnt know what to do
Click to expand...
Click to collapse
Give us a little more info
what does the SPL in bootloader show?
what radio is showing on the 1st splash screen?
If all else fails place into bootloader and flash a shipped ROM and start over.
yeah. whitey is correct.
what bootloader did you use?
you probably used .41 or .40 unlcoker instead of 2.31.
im kind of a noob how do i find the stuff??
uhh. just go to bootloader mode (quad color screen with seriel when not plugged in and usb when plugged in via usb)
(power+camera+reset hole) then tell us what you see.
just type all of the info on the screen.
alright it says
vogu100
spl-0.36.0000
cpld-3
hmm. i would recommend you downgraded your rom+radio with a nongps rom because you used a nongps unlocker.
use a tnz one
ftp://up.ppcgeeks.com/Vogue/Users/Im...RUU_signed.rar
and then update the radio using 3.42.5 or 3.42.3
-sorry can't find link to exact radio update, but you should update via sd card-
then load stock rom
then unlock with 2.31 unlocker (cokeman's)
then flash custom rom
i installed nfsfANS ROM but i only get date when i make a call it says something about athintcation
is this when you only make a call?
if so. then you call your carrier.
(for verizon its *228)
and press option 1.
idk about sprint, bell, altell. but you need to authorize your phone to make phone calls, receive sms, and use data. in order to use data/send-receive pix messages, you need to use a cab. avalaible here.
http://forum.ppcgeeks.com/showthread.php?t=88519
it is in the first post, towards the bottom.
Hi everyone well I'm new to the flashing and dont want to jump any steps as this could possible brick my phone...
I've been having some problems with flashing as i cant find a step by step to flashing my HTC TP2. I've managed to do the RhodiumW Hard-SPL package but after trying to flash to some custom RUU's the installation seems to go fine its not until the phone first boots up, that's when the phone just hangs on the HTC splash screen
From there i cant do anything other then boot up to the tricolor bootloader screen and re-install the original 2.04.651.4 update!
can someone tell me what im missing to be able to flash my HTC correctly, or at least point me in the right direction?
Thank you in advance!!!
step 1
http://member.america.htc.com/download/RomCode/HTC Touch Pro2 (Sprint)/HTC Touch PRO2 MR1.exe
step 2
http://rhodiumw.htc-unlocks.com/hard-spl.php
step 3
http://www.mightyrom.com/mightyrom/touch-pro-2/
Hey Tommy many thanks for the post. I just upgraded my phone and peeling through the information overload, however you direct link does not work for step 1. I want to make sure that I am running the correct piece of software that you recommending. Could you please list the title for that file?
Nevermind I was able to find it via a mirror site.
Back into lurker status for now
Thanks
alright so i was able to install they mightyrom on my phone that went well my phone didnt freeze and everything started the way it should have.
but does that mean i can now flash my phone to other for example "leo cell" or Bxsteez Rhodium" if not how do i get to that point cuz when ever i flas them to they just freese on the white splash screen with the HTC logo in green letters!!
Thanks!
If you have installed Hard SPL then use the sd card method.
1. Format the sd card FAT32 ( they come FAT default) and copy the rom's .nbh file onto it. Rename to Rhodimg.nbh .
2. Insert sd card back into powered off Rhodium. Go into bootloader by pushing down volume and power.
3. If you did it properly and Hard SPL is on your phone then it should say to press power to update os...
If you aren't sure if you have Hard SPL then go to bootloader without the sd card in there, it should say SPL - 0.85.Olinex if you have Hard SPL, anything else won't register the flash file.
Cheers...
OK I was able to update to Winmo 6.5 with no issues....but here is my questions with regards to the Rhodium_W Hard-SPL
I was attempting to run it and it never gets pass 0%...In reading the details of the install instructions it reads
"the device needs to be connected to Activesync or WMDC via USB cable. and it must not be in Flight/Airplane mode (i.e. the phone part should be on).
3) internet access is required as the program checks online for updates and for the license."
Click to expand...
Click to collapse
I have yet to activate my phone with Sprint could this be my error that I need to active my phone? I wanted to have the phone flashed and customized before activating.
signalsoldier said:
OK I was able to update to Winmo 6.5 with no issues....but here is my questions with regards to the Rhodium_W Hard-SPL
I was attempting to run it and it never gets pass 0%...In reading the details of the install instructions it reads
I have yet to activate my phone with Sprint could this be my error that I need to active my phone? I wanted to have the phone flashed and customized before activating.
Click to expand...
Click to collapse
I think you should ask this in the hard spl thread in the cmda section...That is the place for those questions Assuming that you have a cdma phone because you did not mention it. Otherwise check the hard spl thread in the gsm section.
Heading that way thanks for the directions mate!
Alright so ive been able to flash my rom to my first custom rom by energy which i like very much, although still a noob, i want to flash it to a different rom
What is the best way to flash to a different rom with out leaving any files behind that would affect the new rom?!
do i have to do a hard reset or something that would clear my phone from any old files?!
htcru7 said:
Alright so ive been able to flash my rom to my first custom rom by energy which i like very much, although still a noob, i want to flash it to a different rom
What is the best way to flash to a different rom with out leaving any files behind that would affect the new rom?!
do i have to do a hard reset or something that would clear my phone from any old files?!
Click to expand...
Click to collapse
Just flash away
LOL alright thanks i guess im just paranoid but thanks i'll "flash away"
Lock
When you start Rhodium_CDMA_HardSPL_V1_10R3_100HSPL stoppers on 0%.
I removed the firmware via mtty 1.42 entering the command: task 28 \ task 29. Ie fully formatnul system. This is often applied to remove the lock on the HTC 6800. At this time nothing worked. Under bootloger any firmware stoppers on 0%. Besides, even the official RUU_Rhodium_W_S2_Sprint_WWE_2.04.651.4_RS_2.32.00WF_NV_SPCS_2.20_0224_PRL60660_S
hip
and HTC Touch PRO2 MR1 from the official portal hangs at 1%, then is restarted Device, and as expected if there is no OSes lit logo HTC ...
What should I do?? If GSM is blocked, how do I remove it to flash?
Ps Is it possible to disable the lock on the firmware via mtty
1.42??
Thank you very much for your answer!
Scream-krg said:
When you start Rhodium_CDMA_HardSPL_V1_10R3_100HSPL stoppers on 0%.
I removed the firmware via mtty 1.42 entering the command: task 28 \ task 29. Ie fully formatnul system. This is often applied to remove the lock on the HTC 6800. At this time nothing worked. Under bootloger any firmware stoppers on 0%. Besides, even the official RUU_Rhodium_W_S2_Sprint_WWE_2.04.651.4_RS_2.32.00WF_NV_SPCS_2.20_0224_PRL60660_S
hip
and HTC Touch PRO2 MR1 from the official portal hangs at 1%, then is restarted Device, and as expected if there is no OSes lit logo HTC ...
What should I do?? If GSM is blocked, how do I remove it to flash?
Ps Is it possible to disable the lock on the firmware via mtty
1.42??
Thank you very much for your answer!
Click to expand...
Click to collapse
the Hard-SPL will only work if you booted windows mobile. you have to sync the phone in windows mobile to the PC.
is there other way to get through in hard spl because i dont have any account for example, paypal...... http://media.xda-developers.com/images/icons/icon9.gif
chrisjavier666 said:
is there other way to get through in hard spl because i dont have any account for example, paypal......
Click to expand...
Click to collapse
Hard SPL is free for non-commercial users.
my tp2 is bricked
i tried to upgrade my htc touch pro 2's rom. i received error 226 and anytime i switch it on, it gets to the tricolor boot and displays a lot of info and says try again. Can anyone please help me?
nastyrock said:
i tried to upgrade my htc touch pro 2's rom. i received error 226 and anytime i switch it on, it gets to the tricolor boot and displays a lot of info and says try again. Can anyone please help me?
Click to expand...
Click to collapse
Did you try flashing the stock ROM? It's always a good idea to try that if you think there's no hope. It flashes everything.
Also, did you try task29?
Installed a rom on my tilt 2, or thought i did. phone now boots to windows and freezes. I can boot into bootloader screen and attempt to install other roms however it never gets past 0%.
When it tell me on the computer what image i have nothing appears for the phone image. its just blank. after a while the pda program with say there is a connection error and will rail installing the rom.
plz help =(
Genesis01 said:
Installed a rom on my tilt 2, or thought i did. phone now boots to windows and freezes. I can boot into bootloader screen and attempt to install other roms however it never gets past 0%.
When it tell me on the computer what image i have nothing appears for the phone image. its just blank. after a while the pda program with say there is a connection error and will rail installing the rom.
plz help =(
Click to expand...
Click to collapse
Did You HardSpl Your Phone First?
yes, however at first i thought my phone was cmda.....now i figured it is gsm. went through the process of hard-spl how can i be sure though?
Genesis01 said:
yes, however at first i thought my phone was cmda.....now i figured it is gsm. went through the process of hard-spl how can i be sure though?
Click to expand...
Click to collapse
Since You Can Boot Into Bootloader You Can Check Your SPL Version From There Check It Out & See What Is & Post What It Is Here.
just checked it again and the olinex isnt there anymore. sure that would be the problem. how do i go about fixing said problem?
spl-0.87.0000
Genesis01 said:
just checked it again and the olinex isnt there anymore. sure that would be the problem. how do i go about fixing said problem?
spl-0.87.0000
Click to expand...
Click to collapse
Follow The Instructions In This Thread ---> http://forum.xda-developers.com/showthread.php?t=550131
tried, the phone, even thought it is connected wont sync so the spl wont detect it and run the program
when i go to manual it will start but will hang at 0% until the comp says there was an error in connection =(
Genesis01 said:
tried, the phone, even thought it is connected wont sync so the spl wont detect it and run the program
Click to expand...
Click to collapse
Try Booting Phone Into Bootloader Screen Then Plug In Usb Cable Make Sure It Says Usb At The Bottom Of The Phone Screen Then Try To HardSpl Again.
Try Installing This Cab On Your Phone --> http://hpcmonex.net/roms/enablerapinew.cab Then Run HardSpl Again.
kk thank you, i will try. will post results as soon as i get them. Thanks again. kudos to you!
If your phone does not have the HardSPL on it, and it will not boot properly, you need to get it back into bootloader mode, wait for 'USB' to appear on the screen, and flash the stock ROM, then try again with the HardSPL program.
EDIT: To see what version of Rhodium you have, remove your battery and look at the sticker under there on the phone. you should see something like RHOD100, RHOD200, RHOD300, RHOD400, or RHOD500. RHOD100-300 is GSM. RHOD400 & 500 is CDMA. Make sure you flash the correct ROMs, radios, and HSPL for your device or you run the risk of bricking it.
Hi i was wondering if anyone can help me?
I was trying to flash my desire (which is rooted) back to stock rom when my pc crashed, now my desire wont turn back on.
I have tried to put it into recovery with power button and volume down but all it does is vibrate once and thats it.
If i plug in the charger and take the battery out the led flashes orange and green, but when i put the battery back in it goes to a solid green which i persume means its fully charged, then when i try to go into recovery again the led goes out and i am back to where i started e.g a dead Desire
Can i make a Goldcard to fix this problem on my pc without using my phone or is that out of the question?
The phone is out of warranty
Please help if possible
Regards mimic
Can you go to fastboot? Back button and Power?
Yes i have tried that but still nothing
Moscow Desire said:
Can you go to fastboot? Back button and Power?
Click to expand...
Click to collapse
volume down and power ?
He already did that....
Moscow Desire said:
He already did that....
Click to expand...
Click to collapse
oh yeah .... teach me to skim read
Based on what you have said, your recovery and backup is TU. Without a recovery menu, I suspect, not a lot of folks can help you.
I suppose that if you connect USB to the PC, it gives you Device not found?
If so..... I would say installing the Android Development Kit/Package,
See if it recognizes and you can use it to do things.
If not..... you're Fubarred...
how do i use the android package?
Yes i tried plugging it into the pc and it doesnt find the phone
Do you think there will be anywhere were i will be able to get it fixed and at what cost?
If the cost is too much i will just bin the phone and save up for another
wilbur-force said:
oh yeah .... teach me to skim read
Click to expand...
Click to collapse
I do it quite frequently.....
ok i plugged it back into the pc and looked in device manager and android usb devices has come up which is showing my HTC
any ideas?
I really appreciate all the help thankyou
Holy sheepskin, you have a USB connection.
Sorry for the batman cliche.....
If you have a usb connection, I would say to flash an RUU back to stock.
Usually this means, you have to have HTC sync instaled...
Bump to smbdy who can direct this person to a stock RUU file...Too many beers.... running on auto-pilot now
I tried running this stock rom which is the 3 network...RUU_Bravo_H3G_UK_1.20.771.3_Radio_32.36.00.28U_4.06.00.02_2_release_124822
But it says phone not found???
Below is a screenshot of device manager
Not a problem, no thanks necessary, unless we fix the issue.
Ok, so, we have determined, that your PC, can see the phone, at least through device manager.
Next, can you view the contents of the SD card through Windows Explorer?
If so, make sure HTC is installed correctly., just a precaution, look for any warnings in device manager.
I assume, you have not rooted or installed a custom ROM?
If not, with HTC running, you should be able to double click the ROM...XXXXXXXX.exe, and it should connect with the phone, and install... Unless you have the incorrect ROM.
CRAP, you have a Desire, so you should make a "Gold Card" from your SD.
i cannot see the memory card in windows explorer,
my neighbour says he did root the phone and it had a custom rom on it called djdroid or something like that.
I started HTC Sync and it says no device connected
every time i try and install the rom it starts going through the process lioke erasing data and updating signature then it stops and says ERROR [131]: CUSTOMER ID ERROR??
I have tried the WWE rom and the H3G rom but they both come back with an error
Have i got the right rom?? If not could you please tell me which one to get
ps.. how can i make a gold card if i cant boot my phone and will this be able to get my phone up and running?
mimicuk said:
i cannot see the memory card in windows explorer,
my neighbour says he did root the phone and it had a custom rom on it called djdroid or something like that.
I started HTC Sync and it says no device connected
Click to expand...
Click to collapse
Your neighbor????
(witholding comment)
Dude, somehow, I think he dumped his problems on you.
Well, on XDA, we have the brightest and most experienced. And there are some pretty obstinant people, who refuse to throw the towell in.
And believe me, we will all put our 2 cents in on this one to get you up and running.
So, a challenge to all that would care to enter......
And believe me, I haven't seen the "big guns" yet. You just have to shake them outta their shell....
I really hope someone can help me figure this out as i really dont want to throw the phone away
By the way i think i have come to the right place to get the best help
Do you have a GOLD Card????
I mean your SD.
Looks like a typical gold card error when flashing.
for a gold card, look here..
http://theunlockr.com/2010/06/07/how-to-root-the-htc-desire/
yes i have an SD card which is in my HTC
But i have no idea what a goldcard is?? lol