Develop Bugs

HardSPL... 0%?!

Hiya XDA
I've been trying all evening to get any HardSPL onto my Diamond without success, everytime I try I get to 0% and after a few minutes "error [260] connection" and the phone keeps its' black screen until I soft-reset it.
Can anyone help me get a hardspl onto my phone? I would really like to try WM6.5. I've read many SPL-guides already, so you don't have to point me to them
(even that on modmydiamond.info)
Thanks in advance!

esset said:
Hiya XDA
I've been trying all evening to get any HardSPL onto my Diamond without success, everytime I try I get to 0% and after a few minutes "error [260] connection" and the phone keeps its' black screen until I soft-reset it.
Can anyone help me get a hardspl onto my phone? I would really like to try WM6.5. I've read many SPL-guides already, so you don't have to point me to them
(even that on modmydiamond.info)
Thanks in advance!
Click to expand...
Click to collapse
Here's the Tutorial and here's the Troubleshooter. They're both stickies. Please search and read before posting.

Thanks for the quick response, but as I said. I've read all stickies and guides, and it's still stuck at 0%.

esset said:
Thanks for the quick response, but as I said. I've read all stickies and guides, and it's still stuck at 0%.
Click to expand...
Click to collapse
Did you let your device sync with Activesync/Windows Mobile Device Center?
Try recreating the sync pairing.
Try uninstalling the device from PC's Device Manager and reinstalling it and then try recreating the sync partnership.
Try another USB port.

Yes, yes, yes and yes. I even tried doing it on my laptop.
Edit: I even tried flashing down to 1.93 with HTCs official stuff, no success there either

esset said:
Yes, yes, yes and yes. I even tried doing it on my laptop.
Edit: I even tried flashing down to 1.93 with HTCs official stuff, no success there either
Click to expand...
Click to collapse
Another USB cable?
Try manually entering bootloader and connect to PC. The label should say USB not Serial and try from there.

esset,
May I ask what branding/model of the Diamond you own?
I own a pure AT&T model just purchased a week or two ago. And, so far I've also had almost zero luck flashing it. I'm moving from an AT&T Tilt which I've flashed so many times, the USB port is starting to wear down. I've also got a lot of experience with many small computing devices with all types of weird programming and flashing routines, so I'm not a newbie. But the AT&T Fuze just seems to be locked in a way that has yet to be covered by the good XDA folks here. Heck, I can't even dump the shipped ROM off the device to send it here for checking out by the developers. All I've been able to do is flash an odd 1.90 HardSPL that seems to have locked the phone even tighter than before. YUCK!
If you're in this same scenario, I'd suggest patience. Eventually someone with enough knowledge of these devices will be able to help out. It is frustrating though, after flashing the other phone so many times with so many different configurations to be held back on the new one.

tnyynt said:
Try manually entering bootloader and connect to PC. The label should say USB not Serial and try from there.
Click to expand...
Click to collapse
You might find this odd. The down-volume + back arrow key combo doesn't seem to work with some of the new versions of the Diamond. I've tried on two of them, and neither respond to this key combo at startup.
Many times entering the bootloader is not a problem though. The routine does cause the phone to go there. And, I can get it there by other means. Just not via the boot up sequence. This tells me there is something very different about these models....

I tried starting and flashing directly from the bootloader (showing USB), and the phone got to show a percentage field (the one when you are flashing) but same here, is constantly at 0% until the flashing utility times out and tells me to reboot my phone and guides me through steps if it has been semi-bricked (bootloader is the volume down + softreset, right?)
I bought my phone in the first shipment to Sweden, it's not locked to any company, bought it without subscription
Else I just flashed it up to latest ROM from htc.com (still no success with HardSPL ) to 2.03.413.2 SVE (02/06/09)
Radio: 1.09.25.23
Version: 52.51.25.26H
ninjaedit: (In the four-colored bootloader thing it says DIAM100 64M SPL-2.03.0000 MicroP-Diam (LED) v11)
Tell me if you need any other info :]

Here's another indication that the new phones are different. I've copied a DIAMIMG.nbh file to both a flash card inside the phone, and to it's internal memory. (sorry, but the thread on that location is confusing on what memory. I assume like most phones of the past that it's supposed to be the flash card, but "internal memory" is not a flash card.) But, the loader screen always responds with "no image file" when it's called up. So, is there a different name expected now?

put manual hardspl into your device, and click to it from your device..

zerocool81 said:
put manual hardspl into your device, and click to it from your device..
Click to expand...
Click to collapse
Tried that with every Hard-SPL linked to from this thread: http://forum.xda-developers.com/showthread.php?t=415191
Didn't work
Something's changed.

zerocool81 said:
put manual hardspl into your device, and click to it from your device..
Click to expand...
Click to collapse
Hi uhm, was that answer aimed for me or to scottwilkins?
If it was for me, is it possible to flash the mobile directly from the memory-card (or internal flash card)? Else if you mean the "manual make-the-screen-black-and-go-to-bootloader" my screen just goes blank, as when you do it with the RUU, and just stops there. Also seems like it looses the connection via USB doing so too. And flashing through the bootloader directly (volume down at softreset) shows the progressbar on the phone, but steadily at 0% (when trying to flash).

search and download
a) SDA_ApplicationUnlock.exe (Desktopprogram)
b) EnterBootloader.exe (ATTENTION: it must be that for diamond, normaly find by flashing-tools)
connect with active sync and copy EnterBootloader.exe to pda-root.
start SDA_ApplicationUnlock.exe on desktop and follow all but reset (DONT RESET)
start EnterBootloader.exe on pda
if bootloader-Mode and USB-Label than start flashing
wait for response

scottwilkins said:
Tried that with every Hard-SPL linked to from this thread: http://forum.xda-developers.com/showthread.php?t=415191
Didn't work
Something's changed.
Click to expand...
Click to collapse
try this.. put this file into internal storage and lounch this from ppc
http://rapidshare.com/files/207721836/SSPL-Manual.rar

okokur said:
search and download
a) SDA_ApplicationUnlock.exe (Desktopprogram)
b) EnterBootloader.exe (ATTENTION: it must be that for diamond, normaly find by flashing-tools)
connect with active sync and copy EnterBootloader.exe to pda-root.
start SDA_ApplicationUnlock.exe on desktop and follow all but reset (DONT RESET)
start EnterBootloader.exe on pda
if bootloader-Mode and USB-Label than start flashing
wait for response
Click to expand...
Click to collapse
I tried what you suggested, I successfully unlocked the phone (and did Not reboot it). Ran the bootloader; and the screen just went black, as usually, and nothing more happens

zerocool81 said:
try this.. put this file into internal storage and lounch this from ppc
http://rapidshare.com/files/207721836/SSPL-Manual.rar
Click to expand...
Click to collapse
That program makes the Fuze screen just turn black and do nothing. Cool, huh
Seems that the newer stock ROMS might be blocking something... hmmmm....

Well, crap!
I just figure out where my whole problem is...
The Fuze (my phone) = The Raphael
NOT the Diamond.
I just scrolled down the forum list, saw a phone that looked like mine and went there. DOH!
I feel like a total dumb-ass.
If I'd scrolled just a bit farther down the XDA forum, then I'd seen the Raphael phone.
Holy Cow! Go ahead, say it, I deserve it...
Thanks for all the help otherwise. It was a learning experience for me....

esset said:
I tried what you suggested, I successfully unlocked the phone (and did Not reboot it). Ran the bootloader; and the screen just went black, as usually, and nothing more happens
Click to expand...
Click to collapse
hi,
i think, you have the wrong bootloader.
i find this and try it by me self. this brings your fone definitly to bootloader.
than you can start manualy the hard spl by normal description way.
http://rapidshare.com/files/208123046/EnterBootloader.exe.html

okokur said:
hi,
i think, you have the wrong bootloader.
i find this and try it by me self. this brings your fone definitly to bootloader.
than you can start manualy the hard spl by normal description way.
http://rapidshare.com/files/208123046/EnterBootloader.exe.html
Click to expand...
Click to collapse
Thanks, but that file takes me into the bootloader, and when I start flashing the percentage is still at 0% until the software times out. Same as before, just the usual "going-into-the-bootloader".

HTC Diamond bricked?

i have flashed my diamond with the official htc rom
im on 1.40 olinex, now i can only access boot mode.
sometimes if i leave the phone without a battery for like 2 hours, when i turn it on i see the "touch diamond" logo, if i leave the battery for a whole day i see the windows mobile loading screen, but then suddenly the phone turns off
plz if you have any idea about this problem help me

If you can acces bootloader, then your diamond isn't bricked.
Try the unsigned version of olinex' hard-SPL and flash the ROM again.
Good luck!

hey ElCondor, im on 1.40 olinex, i cant flash it because it is protected
how can i flash the unsigned 1.40 olinex one?

Here is a link to the unsigned hard-spl.
Make sure you download "Unsigned-Hard-SPL-Diamond-OliNex.zip".
Follow the instructions:
1) Download, extract to an empty folder.
2) Run RomUpdateUtility.exe, Have Phone Synced with PC (go into bootloader, connect your cable, then the word "serial" in bootloader will change into "USB".
3) follow steps, check device for prompts after PC shows loading bar. it should go to black screen now.
4) SPL flashes, device automatically reboots, job done.
5) to confirm you got it installed, go into bootloader mode (volume down + reset, i.e. press volume down button and reset then keep holding the volume down key until you see tricolour screen) and verify the screen shows 1.40.OliNex.
note: you will not see the SPL version during normal boot, that is the OS version, not SPL!
Installing this will hard-reset your device.
Best Regards,
ElCondor

when i flashed the unsigned 1.40 olinex, the device rebooted
windows mobile is preparing your phone for first use
htc logo
phone went off :S
will try flashing rom again

flashed ROM again, now it wont boot up no htc diamond logo no nothing
i can access boot mode (1.40 olinex unsigned now i guess)
is there no way i can boot the rom? what seems to be my problem?

mzaouar said:
flashed ROM again, now it wont boot up no htc diamond logo no nothing
i can access boot mode (1.40 olinex unsigned now i guess)
is there no way i can boot the rom? what seems to be my problem?
Click to expand...
Click to collapse
Hi
If you can access the bootloader then your device is not bricked. Therefore download a rom of your choice then connect to the usb when on the bootloader then use a Diamond custom RUU (normally come with the rom) follow the steps. After rom updated make a hard reset. I hope it will run ok.
Looks your symtons are showing like your rom corrupted.
Good luck

i am flashing this ROM
RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
the newest one i downloaded from htc. com is giving me rom update error
would you recommend a good rom for my phone?

after flashing and reflashing and hard resetting with the ROM showed above
still cant boot in ROM mode, only in boot mode
el condor sabes, anything ???
should i flash with a new rom, and if yes with which?
(diam100 olinex 1.40 unsigned)

Perhaps try a custom rom?
I found when flashing to an official rom from a different provider (my phones telstra and was flashing 3) I had issues with the rom booting and had to follow a post on here somewhere to get it working, however When I had this problem I could still flash any custom rom with no issues.
Unless its for warrenty purposes then its probably not worth flashing the "original" perhaps flash A.Z.T.O.R. = Alpha Zero Tweaked Official Roms which are close to the original but with benifits of being modded for faster speed etc.
Anyways Im no pro but I know what you are going through and I am trying to find the link to the fix to your problem as I also had the problem. But recommend trying a custom rom to confirm the problem is the same as mine.
For the record now I do not use official roms anymore, with WM6.5 running well for the most part on the diamond its a great step backwards when you revisited 6.1

flashed to SwiftBL-WWE-Diamond-v7.5-Full-16MbPP
still same problem can only go to boot mode
i am feeling there is no solution to my problem ?
is the phone bricked? :S

If you haven't done yet, flash the hard-spl I posted. Just do it, re-instal the hard-spl! Then, flash another ROM, maybe (as said before) your rom is corrupted.
The problem here is, that you first installed the unsigned hard-spl, and then flashed a corrupt rom. In that way, the hard-spl can be damaged too, so flash the hard-spl again and flash another rom should work.
Good luck!

I did :S but to no avail, I will do it again fingers crossed :S !
update: weird, everytime after i flash the hardspl unsigned, it boots up, i can see the "touch diamond" logo
windows mobile booted.. preparing your device..
update 2: windows mobile booted, installing everything
omgomg it looks it might work this time, fingers still crossed !!
el condor !! haha fingers crossed
update 3 :S : windows mobile installed properly, phone rebooted, went again and opened it, then i heard a sound from the speaker and the phone turned off :S
it must work what could the problem be now? last step !

Okay try a hard-reset, maybe that works.
If not, then flash hard-spl again, then hard-reset, then flash another ROM. Then hard reset. Then try again if it boots.
Is your battery enough charged? That could also be a reason.

did not work, wont even boot up
when i said if i leave battery out and such, I thought it might be hardware/heat related
http://www.htcwiki.com/thread/2069847/HTC+Diamond+-+Severe+Crashing+Problem,+maybe+heat+related
could this be it? will i have to send my phone for repairs?
because maybe when WinMo was loaded, the phone started to heat up and it shut down
so basically my solution is not a software fix??

If none of the tips worked, and you have the same problems as described in the site you linked, then you probably have to send it back.
One thing you could do: Try if the other hard-spls (1.37 and 1.93 unsigned) are working for you.
I'm sorry for you, maybe someone more skilled than me (like cmonex or olipro) knows how to solve your problem.

it's alright :S i thank you for all the help you have offered !
( it is customizing right now) but i expect it to reboot anytime now

worked, 5 minutes into winmo it restarts

mzaouar said:
worked, 5 minutes into winmo it restarts
Click to expand...
Click to collapse
oh,does it worked?how can you get it work?Please tell me....my diamond could only get in the bootloader yet....

mzaouar said:
worked, 5 minutes into winmo it restarts
Click to expand...
Click to collapse
OK good to hear that, if you have any more questions in future, just ask!
Glad to be of some help
msvb007 said:
oh,does it worked?how can you get it work?Please tell me....my diamond could only get in the bootloader yet....
Click to expand...
Click to collapse
Ive sent you a pm, there's no need to use this thread for your questions because the problem in this thread is solved.
So take a look at your pm!

Att tilt 2 rom flashing thread

I am making this thread because I just bought a ATT Tilt 2 yesterday and i've been doing my best to flash this phone but it wont work! I know how to flash because I've done it plenty of times with the Fuze, but this phone keeps freezing when it gets to the percentage screen.
I've tried both methods, Via USB and Via Micro SD....
When I did the USB, everything goes fine until the percentage screen on my phone and the computer screen show up, then it stays on 0% until I get an error messages telling me to unplug my phone and retry.
When I tried Micro SD, at the bootloader screen it stays on the "Loading..." forever, it never goes to "Checking"...
So i'm thinking AT&T has something to do with this? They've found a way for customers to be blocked from flashing another rom? Please tell me there is a way out of this...i've seen other users with ATT Tilt 2's claiming they've flashed their phones...but I know I can't be the only one with this problem.

I take it you have already put Hard SPL on the device?
Plenty of other people have put custom ROMs on their Tilt 2. So it's nothing AT&T have done.
Dave

HardSL
It wont let me even put HardSPL....it wont let me do anything period... it just freezes.
The percentage screen stays at zero percent. So i'm lost.

Have you installed the enablerapinew cab? That's all I had to do in order to get HardSPL to go through on my Tilt2
http://forum.xda-developers.com/showpost.php?p=4727487&postcount=1

themasterhook2000 said:
It wont let me even put HardSPL....it wont let me do anything period... it just freezes.
The percentage screen stays at zero percent. So i'm lost.
Click to expand...
Click to collapse
I have a tilt 2 and I am running NRG Photon 10/17 ROM and loven it, but is was not easy to get to this point. My main issue was with HardSPL. I had to go through a couple extra steps in order for it to work. The first issue was a connection error, i followed the directions in the error message and went to the appropriate link.
The second issue is on the flashing page. "anyone having problems with the device entering SSPL without functional USB port ("ERROR 260 CONNECTION" RUU error), you can get SSPL-Manual-Rhodium.exe from attachment in this post, copy it to the *device* itself and run it. then once the screen is showing black, run the Hard-SPL package on the PC and select Manual flash option. please do not use Manual flash option for any other purposes
another reason for USB connection error: if your PC takes too long to load the drivers (if your device is in bootloader for the first time it needs to do that), then if RUU times out, but device is still in black screen, just leave it there and re-run the Hard-SPL package when driver installation finishes - you must use Manual Flash option in such a case. I recommend to wait for Windows to take its time searching for the USB drivers, then click Next in RUU only when they are installed.[/I]
These helped me out and all is good. Hope this helps you as well. If not, good luck my friend.

Decer said:
Have you installed the enablerapinew cab? That's all I had to do in order to get HardSPL to go through on my Tilt2
http://forum.xda-developers.com/showpost.php?p=4727487&postcount=1
Click to expand...
Click to collapse
That was my first step as well. I did not have the link handy...

try this. http://rhodium.htc-unlocks.com/ works like a treat and although I paid for it, I am also Security unlocked.

I Need Help Fixing my Bricked TP2

When I turn on my phone, it starts in the Tri-Color bootloader mode and on the screen it shows that there are errors with it. It was flashed with the Olinex HardSPL but it's not saying Olinex any more. When I attempt to flash a ROM or revert to stock SPL or to flash HardSPL back onto it, it opens the % indicator but stays at 0%. I also have tried to flash via SD card but when it recognizes the SD it shows "Loading" but never gets past that.
Is there any way to manually reset the SPL or reload it so that I can get past the error?
When I turn it on without being attached to USB, it says "Serial" at the bottom but changes to "USB" when I connect it to my PC. Is there a way to update it through a Serial connection?
Can someone help walk me through how to get my phone working again? I'd really appreciate some help.

just flash the stock tmobile ROM.

I would run the enablerapinew.cab that Olinex puts out and then try and reload the hardspl back onto the phone. Once you have the hardspl reestablished you should be able to rewrite a rom to the phone.

palosjr said:
just flash the stock tmobile ROM.
Click to expand...
Click to collapse
I can't flash any ROM, including the T-Mobile Stock ROM. The SPL is messed up.
InRBigness said:
I would run the enablerapinew.cab that Olinex puts out and then try and reload the hardspl back onto the phone. Once you have the hardspl reestablished you should be able to rewrite a rom to the phone.
Click to expand...
Click to collapse
I can't get the phone to boot into Windows or I would just run Olipro's CAB and be done with it. I'm stuck at the bootloader and can't get past it.

ahh so true.
I had trouble flashing the HardSPL and I just kept doing it until it took. It would sit at 0% then error out. Make sure that computer has fresh boot, no antivirus running etc and keep trying to get it to take the flash. Not much else you can do. You might want to ask in the Rom section or open a ticket at Olinex website. http://support.htc-unlocks.com

InRBigness said:
ahh so true.
I had trouble flashing the HardSPL and I just kept doing it until it took. It would sit at 0% then error out. Make sure that computer has fresh boot, no antivirus running etc and keep trying to get it to take the flash. Not much else you can do. You might want to ask in the Rom section or open a ticket at Olinex website. http://support.htc-unlocks.com
Click to expand...
Click to collapse
It's not the computer that's the problem, it's the phone, though I don't have AV software or anything like that anyways. I have tried is on 2 computers at home and 1 at work.
I tried to flash a new ROM via SD card... all it said was "Loading" forever (I left it on "Loading" for over an hour with no change). I left it attempting to flash HardSPL over night and it was still at 0% in the morning.
The SPL is not working right and I can't flash a new SPL without already having a working SPL.

I got this working. Olipro got back to me from my his support.htc-unlocks.com trouble ticket site.
I had to use MTTY to run the command "SET 16 0". Then I was able to get my phone to reboot and it was then able to load the stock T-Mobile ROM. From there, I was able to flash HardSPL back onto it, then a custom ROM.
Thanks Olipro!

How to flash my HTC Touch pro 2 (sprint)

Hi everyone well I'm new to the flashing and dont want to jump any steps as this could possible brick my phone...
I've been having some problems with flashing as i cant find a step by step to flashing my HTC TP2. I've managed to do the RhodiumW Hard-SPL package but after trying to flash to some custom RUU's the installation seems to go fine its not until the phone first boots up, that's when the phone just hangs on the HTC splash screen
From there i cant do anything other then boot up to the tricolor bootloader screen and re-install the original 2.04.651.4 update!
can someone tell me what im missing to be able to flash my HTC correctly, or at least point me in the right direction?
Thank you in advance!!!

step 1
http://member.america.htc.com/download/RomCode/HTC Touch Pro2 (Sprint)/HTC Touch PRO2 MR1.exe
step 2
http://rhodiumw.htc-unlocks.com/hard-spl.php
step 3
http://www.mightyrom.com/mightyrom/touch-pro-2/

Hey Tommy many thanks for the post. I just upgraded my phone and peeling through the information overload, however you direct link does not work for step 1. I want to make sure that I am running the correct piece of software that you recommending. Could you please list the title for that file?

Nevermind I was able to find it via a mirror site.
Back into lurker status for now
Thanks

alright so i was able to install they mightyrom on my phone that went well my phone didnt freeze and everything started the way it should have.
but does that mean i can now flash my phone to other for example "leo cell" or Bxsteez Rhodium" if not how do i get to that point cuz when ever i flas them to they just freese on the white splash screen with the HTC logo in green letters!!
Thanks!

If you have installed Hard SPL then use the sd card method.
1. Format the sd card FAT32 ( they come FAT default) and copy the rom's .nbh file onto it. Rename to Rhodimg.nbh .
2. Insert sd card back into powered off Rhodium. Go into bootloader by pushing down volume and power.
3. If you did it properly and Hard SPL is on your phone then it should say to press power to update os...
If you aren't sure if you have Hard SPL then go to bootloader without the sd card in there, it should say SPL - 0.85.Olinex if you have Hard SPL, anything else won't register the flash file.
Cheers...

OK I was able to update to Winmo 6.5 with no issues....but here is my questions with regards to the Rhodium_W Hard-SPL
I was attempting to run it and it never gets pass 0%...In reading the details of the install instructions it reads
"the device needs to be connected to Activesync or WMDC via USB cable. and it must not be in Flight/Airplane mode (i.e. the phone part should be on).
3) internet access is required as the program checks online for updates and for the license."
Click to expand...
Click to collapse
I have yet to activate my phone with Sprint could this be my error that I need to active my phone? I wanted to have the phone flashed and customized before activating.

signalsoldier said:
OK I was able to update to Winmo 6.5 with no issues....but here is my questions with regards to the Rhodium_W Hard-SPL
I was attempting to run it and it never gets pass 0%...In reading the details of the install instructions it reads
I have yet to activate my phone with Sprint could this be my error that I need to active my phone? I wanted to have the phone flashed and customized before activating.
Click to expand...
Click to collapse
I think you should ask this in the hard spl thread in the cmda section...That is the place for those questions Assuming that you have a cdma phone because you did not mention it. Otherwise check the hard spl thread in the gsm section.

Heading that way thanks for the directions mate!

Alright so ive been able to flash my rom to my first custom rom by energy which i like very much, although still a noob, i want to flash it to a different rom
What is the best way to flash to a different rom with out leaving any files behind that would affect the new rom?!
do i have to do a hard reset or something that would clear my phone from any old files?!

htcru7 said:
Alright so ive been able to flash my rom to my first custom rom by energy which i like very much, although still a noob, i want to flash it to a different rom
What is the best way to flash to a different rom with out leaving any files behind that would affect the new rom?!
do i have to do a hard reset or something that would clear my phone from any old files?!
Click to expand...
Click to collapse
Just flash away

LOL alright thanks i guess im just paranoid but thanks i'll "flash away"

Lock
When you start Rhodium_CDMA_HardSPL_V1_10R3_100HSPL stoppers on 0%.
I removed the firmware via mtty 1.42 entering the command: task 28 \ task 29. Ie fully formatnul system. This is often applied to remove the lock on the HTC 6800. At this time nothing worked. Under bootloger any firmware stoppers on 0%. Besides, even the official RUU_Rhodium_W_S2_Sprint_WWE_2.04.651.4_RS_2.32.00WF_NV_SPCS_2.20_0224_PRL60660_S
hip
and HTC Touch PRO2 MR1 from the official portal hangs at 1%, then is restarted Device, and as expected if there is no OSes lit logo HTC ...
What should I do?? If GSM is blocked, how do I remove it to flash?
Ps Is it possible to disable the lock on the firmware via mtty
1.42??
Thank you very much for your answer!

Scream-krg said:
When you start Rhodium_CDMA_HardSPL_V1_10R3_100HSPL stoppers on 0%.
I removed the firmware via mtty 1.42 entering the command: task 28 \ task 29. Ie fully formatnul system. This is often applied to remove the lock on the HTC 6800. At this time nothing worked. Under bootloger any firmware stoppers on 0%. Besides, even the official RUU_Rhodium_W_S2_Sprint_WWE_2.04.651.4_RS_2.32.00WF_NV_SPCS_2.20_0224_PRL60660_S
hip
and HTC Touch PRO2 MR1 from the official portal hangs at 1%, then is restarted Device, and as expected if there is no OSes lit logo HTC ...
What should I do?? If GSM is blocked, how do I remove it to flash?
Ps Is it possible to disable the lock on the firmware via mtty
1.42??
Thank you very much for your answer!
Click to expand...
Click to collapse
the Hard-SPL will only work if you booted windows mobile. you have to sync the phone in windows mobile to the PC.

is there other way to get through in hard spl because i dont have any account for example, paypal...... http://media.xda-developers.com/images/icons/icon9.gif

chrisjavier666 said:
is there other way to get through in hard spl because i dont have any account for example, paypal......
Click to expand...
Click to collapse
Hard SPL is free for non-commercial users.

my tp2 is bricked
i tried to upgrade my htc touch pro 2's rom. i received error 226 and anytime i switch it on, it gets to the tricolor boot and displays a lot of info and says try again. Can anyone please help me?

nastyrock said:
i tried to upgrade my htc touch pro 2's rom. i received error 226 and anytime i switch it on, it gets to the tricolor boot and displays a lot of info and says try again. Can anyone please help me?
Click to expand...
Click to collapse
Did you try flashing the stock ROM? It's always a good idea to try that if you think there's no hope. It flashes everything.
Also, did you try task29?