Related
Why is it that you need a gps reciever to use with an XDA/XDA II? Is AGPS (AGPS triangulates position from the towers) not available for GSM?
There are 2 resons for not wanting to rely on gsm network tower info:
1. The info (cell broadcast) is not sent with every network
2. Its not close that precise as true gps
There is a swiss site that has made an application that uses network info for positioning.
Cant remember the name though
Some infos...
AGPS is called asissted gps, which means the GPS receiver ( which is still a piece of hardware, which is not included in current phones ) uses GSM location information to find it's poistion, this makes the GPS receiver "lighter" and faster.
This service will cost money, as the provider will not give the information for free.
GSM location info based on triangulation is something different, and indeed not very reliable.
Alex
Thanks
I was just curious. If you can remember the name of the swiss site that would be fantastic. I have the sense of direction similar to a cockroach with no head, so if it were to be accurate within 1/2 mile, that would be good enough for me. I don't need it soo bad that I have to buy a GPS, but if it were available by just installing some software, well that would be a different story. Anyway, thanks soo much again!
Found the site in my history:
http://gknavigation.de
(sorry: not swiss, it is in german . . .)
Look under 'Navig. Software'in the menu at the right side
a-gps default value
If any affects are known with changing the default value of agps in build.prop.superuser please let me know and also exactly what is the change doing to the hardware is there any benefit or should i stick with the default value of 2
manual agps config
Hi everyone
I'm new and a bit lost and overwhelmed being new to android.
I recently bought a Malata Zpad T6 with GPS and 3G running a Malata ROM of 2.2.
I'm having a few issues with the GPS. It works. I've used the GPS status app which picks up loads of satellites but Google maps is way off. (I live in northern Ireland and it shows my location as somewhere in the north sea.)
When I press the locate button with GPS module off/on Google maps says my location is unavailable.
Could someone give me some help please? Or guidance to sources that will help me.
I have a Orange UK sim in the pad so I'd like to use AGPS. Can I manually configure this? I'd read about the GPS.config file. Does anyone know if this can be manually set up?
Finally, sorry if I posted this in the wrong place. I've been searching xda for days trying to find a solution.
I'm using a
Hi I've got a BlackStone but I can't make the GPS go right!
Which COM should I choose, Which rate? 4800? and in which place: Software or Hardware?
Finally what's the config for googleMaps?
Thank so much...
DassaultMirage said:
Hi I've got a BlackStone but I can't make the GPS go right!
Which COM should I choose, Which rate? 4800? and in which place: Software or Hardware?
Finally what's the config for googleMaps?
Thank so much...
Click to expand...
Click to collapse
try com 4, rate 9600.
Forgive me if I understood your problem wrongly. While the HD has built-in GPS it is not supplied with any software or app associated with it for navigating or even for displaying coordinates or compass navigation.
Once you download the Google Maps (which also supports, for some countries the street map display) application onto your device, it will make use of the GPS and show you your position, with moving map display as you drive, quite smoothly and accurately. It will also show your approximate position indoors without GPS (using A-GPS and the cell site ID supporting LBS).
For point to point navigation and voice prompts guess one has to use 3rd party app like Garmin XT, TomTom; but I have not used these.
genesicgaogaiga said:
try com 4, rate 9600.
Click to expand...
Click to collapse
yes but in the software or in the hardware field?
You need to state what software you are using. If its Google maps just let Windows manage the GPS.
Why doesn't the GPS Photo work. It says that GPS is not active or something. What's up with that?
genesicgaogaiga said:
try com 4, rate 9600.
Click to expand...
Click to collapse
Thank you, but it doesn't work so!!! What's wrong???
I had the same problem, no one can't help me. Any gps software I used couldn`t find gps reciver, I've tried any combinations with COM ports....nothing. After 1 month and about 10 gps software I removed SIM card....and BINGO!!!! My old SIM card generate problem that nothing can find built-in gps reciver in my Touch HD. Try without SIM card and if it works go to operator and replace to new SIM card
Endow
Not at all
Sorry about this, but your tips does'nt help me:
I removed the SIMcard but the GPS in GOOGLEMAP didn't work anyway!
I tried to let it be managed by windows and to set it on COM4 with 9600bauds but no options succeded!
I can't understand what's wrong!!!
Another thing
Furthermore, when I set up the GPS-params in the params-application of windows mobile 6, the hard port (COM4) I chose isn't recorded by the software!!!
Maybe it's a hint for the answer?
Help me, geeks of HTC!
go to google and download the lastest ver. google map.
try to go to a window or a open space and turn on the google map. press option and try to click use gps , and see any reading on the top right of the map screen.
dont need to adjust any com 4,5,6 things.
once you got a lock on gps. you can close the google map and start to look out for third party nav software. try it.
Mine works perfectly fast at
COM: 4
BAUD: 57600
Im using iGuidance 2009
does ur phone need to go online when activating the gps? my car's gps doesnt need online yet the device can detect its location. however when i use google map, the phone just went online and try to search for my location. not too ideal as i have to pay for every kb sent/recieved.
Ooo
Maybe I will try to refresh the GPRSSettings with the soft designed for it!
I will reply when I'll know further about it...
Mine shows correct location when I set port - Com4 and BAUD: 57600 on Google maps for just a second. Then it jumps to some other continent and says GPS not available and shows the help dialog. Allowing windows to manage gps also gives same results what am i doing wrong?? or is it a limitation of blackstone/google maps app..
Reply
I've tryed what you done but it didn't succeded!
In the GMaps List I see: "COM4:" and there is nothing after the ":" !
When I confirm this update, the soft tell me that he can't found a device on this COM!!!
ok, my settings, com4, bd 4800, let windows manage (which kinda negates any settings before hand) Google maps set to let windows manage. My GPS locks well and always finds plenty of satalites, so i dont understand why you guys are having problems.
Howver, on my polaris with cooked rom, my google maps does misbeahve sometimes when the gps is locked and the map will suddenly say im in hong kong when im in the uk!! (i even unistalled google that was included in rom and downloaded new version from google)
So i believe in my limited wisdom that its probably a rom issue (radio more likely).
What i do have to decide is if the official 1.56 rom is worth flashing or not (still on 1.14)
What you guys think?
Reply
I'm not sure to understand you because I come from Switzerland and I main speek French.
YOu think that it is a ROM version's problem? Which one should I install? (and how to do it ?)
Thanks so much!
P.S.: I don't have changed any ROM or Radio Version in this HTC Touch HD!
I have never fiddled with ROM but I have same issue. google maps jumps continent!! momentarily despite 7 satellites. May be an issue with Google maps itself??
timmymarsh said:
Howver, on my polaris with cooked rom, my google maps does misbeahve sometimes when the gps is locked and the map will suddenly say im in hong kong when im in the uk!! (i even unistalled google that was included in rom and downloaded new version from google)
So i believe in my limited wisdom that its probably a rom issue (radio more likely).
What i do have to decide is if the official 1.56 rom is worth flashing or not (still on 1.14)
What you guys think?
Click to expand...
Click to collapse
timmymarsh said:
ok, my settings, com4, bd 4800, let windows manage (which kinda negates any settings before hand) Google maps set to let windows manage. My GPS locks well and always finds plenty of satalites, so i dont understand why you guys are having problems.
Howver, on my polaris with cooked rom, my google maps does misbeahve sometimes when the gps is locked and the map will suddenly say im in hong kong when im in the uk!! (i even unistalled google that was included in rom and downloaded new version from google)
So i believe in my limited wisdom that its probably a rom issue (radio more likely).
What i do have to decide is if the official 1.56 rom is worth flashing or not (still on 1.14)
What you guys think?
Click to expand...
Click to collapse
I have the same problem. I have already donwloaded the 1.56 rom and the uspl but cant seem to decide to flash or not.
Hi,
I signed up a touch HD with orange UK yesterday. The first thing I did was to install TOMTOM on the machine. However, TOMTOM kept reporting no GPS device. If it finds the internal GPS receiver, then it is 20 minutes later. One thing I notice is that when TOMTOM is looking for the GPS receiver, there is something trying to connect to the internet.
I am sure I did everthing right as I was using this copy of tomtom on the touch diamond and it worked like a treat.
Did orange do anything to the GPS so people can only use their stupid orange map? If they did, is there any way that I can get the tomtom working?
Many thanks in advance.
Thank you for all your advice and the problem has been solved. Here are a few tips for people who have the same problem.
1. A-GPS can only make things worse, switch it off.
2. Update your quick-GPS data.
3. It seems that tomtom struggles to find GPS device on certain orange handset. If you are the unlucky one, try change your hand set with orange. If you don’t want to go through the trouble, open google map to locate satellite before open tomtom.
4. Debrand the handset.
5. Orange’s customer service is crap, stay away if you can
Have you tried updating QuickGPS in the programmes.
Also check A-GPS is disabled in windows settings.
mijyou said:
Have you tried updating QuickGPS in the programmes.
Also check A-GPS is disabled in windows settings.
Click to expand...
Click to collapse
Thanks, I have updated the quickGPS the first thing. I have the a-gps enabled, though it could help to locate the satallite.
I think it is recomended to be disabled.
Perhaps try it if you have not.
GPS always worked fine for me with the stock Orange ROM, that was with 1.14 though, I think they come with 1.19 now, it also works fine with all of the cooked ROMs I've tested. Perhaps the version of TomTom you have isn't fully compatible with the HD (I did notice you said it worked on the Diamond, but perhaps there's a hardware/software difference on the HD which stops it working.
mijyou said:
Also check A-GPS is disabled in windows settings.
Click to expand...
Click to collapse
that was the most important one
I am happily have 3 navigation programs on my HD, Tomtom, iGO, Navigon
but I always prefer iGO
Hi Guys, Thank you for your reply.
For you who is using tomtom, which version are you using? I am using 7.48
Thanks all for your help. Disable A-GPS seems hlep a lot. I will try again today.
By the way, UK orange's customer service is what I call crap. I called them about the GPS last night and a idiot tell me that as far as I can make phone calls, my phone is fine.
mmp7 said:
Thanks all for your help. Disable A-GPS seems hlep a lot. I will try again today.
By the way, UK orange's customer service is what I call crap. I called them about the GPS last night and a idiot tell me that as far as I can make phone calls, my phone is fine.
Click to expand...
Click to collapse
Don’t blame them, that is way we are here.
My tomtom version is 7.915.9196, with latest UK and Ireland map v830.2307
but unfortunately it doesn’t support 7 point postcode system just accept 4 digit post code and in order to find the address you actually need to know name of the street as well. But I have iGO with 7PPC which it is fantastic.
MrKaon said:
Don’t blame them, that is way we are here.
My tomtom version is 7.915.9196, with latest UK and Ireland map v830.2307
but unfortunately it doesn’t support 7 point postcode system just accept 4 digit post code and in order to find the address you actually need to know name of the street as well. But I have iGO with 7PPC which it is fantastic.
Click to expand...
Click to collapse
830.207 works just fine with 7 digit postcodes, as have all maps for the last couple of years.
spud_work said:
830.207 works just fine with 7 digit postcodes, as have all maps for the last couple of years.
Click to expand...
Click to collapse
may I ask what version of tomtom are you using?
7.915.916
it is non-standard feature, but you just need an additioal 'zip' folder
spud_work said:
7.915.916
it is non-standard feature, but you just need an additioal 'zip' folder
Click to expand...
Click to collapse
thanks for telling me.
ok now for everyone which already had tomtom without 7 digit postcode, do as I listed here:
01- Downloaded the file
www.tomtom.com/updates/great_britainpostal_all.zip
02- copy it into new folder (folder's name doesn't matter)
03- extract it.
04- click on setup.exe
05- choose "i agree" then click next.
06- choose Pocket PC (Windows CE)
07- choose install Tom Tom Great Britin Postcode then click next.
08- choose other location (Advanced)
09- choose Folder on the computer
10- select any folder you want
the software will generate a zip folder
after getting the zip folder move it to your SD card's Root
start TOM TOM you will be able to do a full 7 digit postcode search.
dead link
link not working for me?
can some one try it and report working or not
thanks
I often get the 'GPS device not found' error on my Orange HD also. A quick fix I've found is to run Google Maps first and lock onto a GPS signal in there, before opening TomTom. Seems to 'solve' the problem for now...
leggoman said:
link not working for me?
can some one try it and report working or not
thanks
Click to expand...
Click to collapse
oops my mistake try it again should be work now
djmc321 said:
I often get the 'GPS device not found' error on my Orange HD also. A quick fix I've found is to run Google Maps first and lock onto a GPS signal in there, before opening TomTom. Seems to 'solve' the problem for now...
Click to expand...
Click to collapse
it shouldn't be like that, when I had Stock ROM on my HD I used to had similar problem beside long waiting time before tomtom finds signal (about 15 ~ 20s) but after flashing HD with Custom ROM every problem is gone, now it finds signal in less than 5 second
I often get the 'GPS device not found' error on my Orange HD also. A quick fix I've found is to run Google Maps first and lock onto a GPS signal in there, before opening TomTom. Seems to 'solve' the problem for now...
Click to expand...
Click to collapse
Exactly what I was going to say.. I had the same problem with mine running 7.9something. If you run google maps in the backgroungd it almost jump started the gps. I have also found that once you get a gps signal it seems to keep it easier..... dunno if thats just hopeful. Oh yes and I am on Orange too stock rom.
i use google maps a lot. In my previous device (Touch HD), using same SIM, I can find my location without GPS on, but generally, on the TP2 I cannot find my location without using GPS. I am on TMOB.
Anyone have a solution?
You got location fixes without GPS? As far as I know you have to have SOME form of GPS (be it GPS, aGPS, or quickGPS) to get a geographical position...
Quick search would have got you here:
http://forum.xda-developers.com/showthread.php?t=551690
The location feature doesn't work on 3G for some reason, just GPRS & EDGE.
can you pls check the link
ha did i really link back to this thread? ouch, sorry. i was doing quite a few things when i replied.
http://forum.xda-developers.com/showthread.php?t=547854&highlight=google+maps
long time reader...1st time poster!!
Hey Gang,
I'm from India & bought x1 2 weeks back. Installed Garmin xt on x1.. tried using it..thought it shows everything POI, every time I click GO TO a particular place... it always come with "AWAITING BETTER GPS ACCURACY".
Do anyone know, If it can be resolved!!!
Thanks IN advance!
Sachin Ghai
click on the signal bars at the top left corner of the main page, then GPS info. Do you see your coordinates or do you see "acquiring satellites"? I only get the "awaiting better gps accuracy" when theres no satellite lock.
look at sky if ther are clouds it makes GPS hard to work.
but my X1's GPS works great and fast
but my GARMIN has 1 mistake
when I'm riding to my car and car shovs speed about 80km/h Garmin shows me about 60km/h
but on the map all streets and cordinates are very corect
Hi there,
There are still several issues in GarminXT on a windows phone! I always used garmin before i tryed tomtom and several others. at first i didn't like tomtom, but it doesn't have any problem with anything! it's alot faster and more reliable! I think you must try tomtom version 7.916. this is the latest
Sachinrocks said:
long time reader...1st time poster!!
...
Sachin Ghai
Click to expand...
Click to collapse
Download this utility and check whether you see any satellites.
lineri said:
Hi there,
There are still several issues in GarminXT on a windows phone! I always used garmin before i tryed tomtom and several others. at first i didn't like tomtom, but it doesn't have any problem with anything! it's alot faster and more reliable! I think you must try tomtom version 7.916. this is the latest
Click to expand...
Click to collapse
Hey there. I have Garmine xt too, and it didn't came with California, Oregon or other big states are missing... is this normal? i bought used one from this owner and doesn't come with the states that i travel most!! i was like wtf... even California was not in there. If this is what Garmin Xt offers, i'm changing it to tomtom or other gps systesm for my x1!! hmmp!
You install it? Or you pay for it?
To be able to "see" satelites from this app, you must register it
I'm using Garmin in my X1 for quite long time without problems.
harveydent said:
click on the signal bars at the top left corner of the main page, then GPS info. Do you see your coordinates or do you see "acquiring satellites"? I only get the "awaiting better gps accuracy" when theres no satellite lock.
Click to expand...
Click to collapse
I tried doing so & it cums back saying "acquiring satellites". I kept it looking for that info for about half an hour, but to no avail.
dejamorison said:
You install it? Or you pay for it?
To be able to "see" satelites from this app, you must register it
Click to expand...
Click to collapse
I installed it..
Any idea where can I register for it?
JC_Agga said:
Hey there. I have Garmine xt too, and it didn't came with California, Oregon or other big states are missing... is this normal? i bought used one from this owner and doesn't come with the states that i travel most!! i was like wtf... even California was not in there. If this is what Garmin Xt offers, i'm changing it to tomtom or other gps systesm for my x1!! hmmp!
Click to expand...
Click to collapse
This is not normal with Garmin. The map is just not complete. you can use Garmin City Navigator to update the maps. Other option is to look for a map for North America witch is activated already.
Good luck with it!!!!!!
Sachinrocks said:
I installed it..
Any idea where can I register for it?
Click to expand...
Click to collapse
You may use and SEX1_HTC_GPS_tooll too.
I am not shure if is it allowed on this forum to talk about warez...?
Anyway, you have to find keygen with instructions (it is tricky to do it but can be done).
Untill you got registered version of Garmin app with map on your device you will not "see" satellites. Also, when you all done with registration and all that, go outside and do some "where to" route and wait to find satellites for first time...it takes for minute or two (with QuickGPS installed and updated).