Related
HI All, have an intersting problem, was surfing the net via wireless when the unit locked up. Soft reset and now all I get is a white screen. The unit seems to hard reset with the startup sound that the unit makes when you first start it up out of the box, but the screen stays white.
Any Ideas? :roll:
mmm.... Hard Reset :twisted:
HI Xeon,
tried that and still comes up with white screen, but does all the correct things re sounds but all you can see is a totally white screen.
You could try leaving it with the battery removed overnight but it sounds like a hardware problem to me, could be the lcd has died or the connection has come adrift for some reason.
I suggest u Upgrade or reinstall the ROM , maybe something happened to one of the files that should not be modified , anyway , u won't lose anything , u already Hard.Rstd .........
i had the same problem before..i did an upgrade that fixed it. but still have a backup even if its a white screen..after i upgraded i had another problem with the Storage Folder missing..and the list goes on..dont wory you'll know what i mean when you get it..
It happened to me the second day I got my O2 XDA IIs. Hard reset didn't seem to do anything... The unit didn't response to a soft reset either... It was just frozen... I removed the battery, boxed it up and was ready to return it. The next day, just before I was about to drop it off, I was curious and did a reset and everything went back to normal... It never happen to me again... Don't know what happened :?
I have the same problem...
The phone shows white screen white it can recieve & make calls, activesync can recognize it.. But the screen still white !!
Any other suggestions for helping solve this problem..
Is this means that the LCD is dead ?? or the problem in its connectors or it's a software prob. ???
Ok has that anyone had this issue with their Orbit?
I had noticed that the keyboard was not giving me any predicted text choices while typing, so I tried to change the input method to no avail. So I decided to perform a sft reset to sort the problem.
Oh was I not happy with the result as for over 5 mins all that was happening with my phone was the screen would light up o2 screen, green screen then enter pin and reset and it would do this again and again.
So even after removing the battery for a few minutes not change once I attempted to start the phone. I even reset the device via the button on the side and it made no difference.
I was just getting ready to bite the bullet and sound off the o2 when I remembered reading on here of something similar happening so I searched and found a posting saying to try and press soft reset just after phone started. And guess what it worked after that so what I want to know is why or what I did to get my phone working again?
Any ideas guys, only thing I can add was the phone was plugged in to my workstation USB so was charging when the initial soft reset was performed while using Valksoft's space reclaimer reset option.
Thanks
JC
Ok an update the phone is now doing this everytime it is turned off. And since the last time it occurred I have been unable to get the phone to work.
Any ideas, I believe it could be a registry issue with the phone as I had recently installed a couple of programs that worked fine for a couple of days then while installing a dictionary several programs were uninstalled in error.
So after installing again this problem has arisen. It is possible that this was not th cause as I hae noticed tat the last scheduled back up was on the 22/01/07 so Monday's was not carried out possibly due to this?
my orbit has also this bug. after a soft reset he is booting up till the pin entry and then a boots again and again. Up to 5 times
Yes, my Orbit sometimes needs to reboot 4 times before it will sucessfully bring up the Home Screen. Anyone got any ideas on why???!!!??
I had enough of it doing this so I have done a hard reset and the problem has gone now just need to set everything back as I want it as backup still had the initial issue once it was retored.
I guess it was to do with the registry but not sure what exactly, maybe redundant reg keys etc?
I've experienced same problem on my dutch t-mobile mda compact III.
Happend after installing different programs, but i can't find the exact cause.
when i remove the microsd (on which i installed the programme's) the device starts en doesn't softreset when phone screen shows.
At first i thought it had to do with programs that tried to connect to gprs before even entering the pincode of the phone. But even without pincode it keeps restarting.
Happend on my 1gb microSD once en also on my 2 gb microSD.
Hope that someone knows what the cause is, so i can prevend it from happening.
Resets caused by the Memory Card Fault
Look at the posts regarding the memory card corruption if you back-up the card format it and then put it back everything is fine for a while. Not puttting a My Documents folder on the storage card usually helps with this issue...
rebooting.
hi,
as you well understand there are only 2 possibilities: software and hardware failure.
Surely, you don't want to think about hardware failure, because in this case the solution is to send it back to seller or to service center. Except for the cases caused by battery and sd card. These are 2 elements you can replace on your own easy.
However, "instability" of the device normally caused by installed software.
The first thing you do, like it or not, if you have a problem, hard reset your device.
BACKUP your DATA before hard reset!
You can try to to remove software piece by piece, but could be time consuming thing and not necessarily lead you to a good result.
Radical approach is to return device to "factory state" - hard reset.
If after hard reset you still have a problem with your device like accidentally rebooting, address to service center or ask seller to to replace the good.
regards,
rebooting.
double post.
I had the issue once... card corrupted. Had a back up so formatted the card, put data back in, issue gone.
This has happened to my orbit a couple of times. But I think if I reset by pressing the reset button on the side of the machine it only resets once. Resetting after installing apps for example from the prompt is bad, do it later by pressing the actual button. This seems to work for me but only time will tell.
my htc p3300 has reset problm
my htc p3300 restarts automatically while im calling or using net it starts autuomatically it goes till green screen where it shows wm 6.1 then restarts again n again i dnt know plz tell me is it software or hardware problm
I was on att site looking at the plans, what's funny they had plans with unlimited incoming calls. So I called about what they had on the site, they said they didn't have that but my phone is stuck on it and a soft reset won't work, I can't turn my phone off or nothing, what's the problem ?
i have a simple fix - take the battery out. then put it back in. "power cycling" usually works when a soft reset doesnt work. good luck
-nstefanelli-
I don't know has anyone had this problem but when I take the battery and put it back it go to the same screen after it loads up. I don't know what I did but something is seriously wrong .
Next step is hard reset.
freeborock said:
I don't know has anyone had this problem but when I take the battery and put it back it go to the same screen after it loads up. I don't know what I did but something is seriously wrong .
Click to expand...
Click to collapse
What screen are you stuck on? If you deny the phone power, it cannot come back to the we browser?
I have a problem with my Artemis. I'll try to decribe the problem and if anyone can help me i will be thankful.
When is Power on it works few minutes than it freeze and screen desapears. After that I try to power but it doesnt work. It needs time to accept the Power comand and I don't know where problem is... (i thing that it's about temperature but i'm not sure)
I tryed to flash with later software and win mobile 5 but the same thing happens.
Any help?
Please specify which applications you have installed and eventually which ROM.
I strongly recommand you to flash your device with latest ROMs like Black and Blue one or others (see the Windows mobile 6 section of Artemis)...
A hard reset would solve your problem anyhow I suppose.
Are you overclocking your CPU with some software? like BatteryStatus for example?
Please let us know...
Gues i fixed the problem
It not was about ROM... I have tryed flashing with Black & Blue, Vanilla etc. but the problem was the same. When I put the Phone in the pocked it freezes. Meybe it was problem with cooling.
Anyway I used a tutorial how to upen the phone, i opened it, cleaned it (using spray for clean) and now it works fine i gues.
Thanks a lot...
Regards
rrezarthajrizi said:
It not was about ROM... I have tryed flashing with Black & Blue, Vanilla etc. but the problem was the same. When I put the Phone in the pocked it freezes. Meybe it was problem with cooling.
Anyway I used a tutorial how to upen the phone, i opened it, cleaned it (using spray for clean) and now it works fine i gues.
Thanks a lot...
Regards
Click to expand...
Click to collapse
can you please put that tuturial in this post????
thanks
jayss said:
can you please put that tuturial in this post????
thanks
Click to expand...
Click to collapse
Wiki is your friend....
http://wiki.xda-developers.com/index.php?pagename=Artemis_Disassemble
I had the same problem with mine....
The phone is fecked take it back to the makers and get a replacement..
I had the exact same problem with my P3300. It's a malfunction in the Motherboard. I've called the dutch helpdesk and because a hard reset didn't do much good the PDA was picked up later that day to be sent to Eurotwice, the repair station in Belgium. I got my phone back 2 weeks later, I started it and it froze again! So I immediatly called HTC Netherlands and again, the P3300 was picked up by UPS that afternoon. The second time I wrote a letter to the repair station and sent it with my phone. In another topic on another website I read that some other phone with the same problem had been fixed by replacing the motherboard. I got my phone back today and it works great! It hasn't crashed today, and I have confidence it won't in the future. So my tip to you and anyone who experiences this problem: Call the HTC helpdesk in your country and ask them to sent your PDA to a repair station. It might take a while but they fix it well! By the way, you have 2 years full garantee so it didn't cost me anything! Great service from HTC!
Had the same problem.
Power was on, then de screen went black and stayed black even after pushing the right upper side button. Had about 4.90mb free storage memory on the phone and 200mb on my card left.
Soft reset didn't work but a hard reset did!
I have the same problem for the last week
I tried to change Roms to original and back to manila, the same problem.
the artemis freeze suddenly without ant reason. after calls, before calls..
it's not wake up and it's show a blank screen. after few soft reset and battery replacement is wake up and work fine till the next time.
for now , I'm work with doppod original rom wm5 but no WIFI.
I think it started last week when I installs "B&B 5.0 love" rom, before that It work fine with pdviet manila2D.
problem upgrade my rom
I'm now have a O2 UK roms on my device.
I try update it to Touch 4.02, with the UPSL but it no working.
the bar with percents jump from 0% to 100% in sec. and I still having the same rom.
I read the uspl guide.
can yo uhelp me ?
Is anyone else having the problem where after a soft reset(or a manual shutdown/restart) touchflo3d doesn't autostart?
It happens to me about 50% of the times I reset, but I jus thave to switch it off again and on again and usually it works fine.
Totally different, but I have this sometimes with Touch Flo 2D on my TyTn II. I usually get it if I've installed to much, It always launches if I haven't got the Micro SD card in though.
I've had this happening to me since I got it, and after a few hard resets it still happens... Seemingly at an increasing frequency too.
Yup, I'm experiencing the same problem.
It's really annoying, and more people are having this issue.
There's already a thread about this.
What works for me most of the time is this:
- Disable TF3D in settings.
- Soft reset device with power button
- Enable TF3D again
- Sometimes TF3D starts now, but if not reset again.
I can't wait for a more stable and fast cooked rom
Hope this helps
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
aiaob said:
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
Click to expand...
Click to collapse
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
i have had this happen a couple of times as well.
quarintus said:
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
Click to expand...
Click to collapse
I doubt it's caused by that. I've hard reset it installed core and tomtoma nd had it happen..
and I'm sure it's not just slow to start up, I've tried making calls and simply leaving it for 10 minutes and it still doesnt start up.
It only started haooening to me after I instaled software.
I guess the best thing to do right now, is to install all software with touchflo disabled, then reboot completly the device to finalize the instaltion, and then reboot it again. Now you can reactivate Touchflo again.
This "trick" has worked perfectly on my Pro 2
HastaSSSS
disable startup
Many programs that you install will leave a startup file in the windows\startup directory. Try cutting and pasting them to some temporary directory. I did that with poutlook and slovoed and the problem has gone away for me, without in any way impairing my calendar/contacts or slovoed functioning.
I got the same problem too.. soft resetting a few times do it or disable/re-enable on Personal-Today Items screen
Kinda annoying
Same problem here. Spoke to HTC today and tol them there were more people having this problem. Mine is so serious that it won't start at all! HTC says I was the first and ONLY one in the world with this problem. They told me that if there were more people having this issue they should CALL HTC. It's free to call them... please do so in finding a solution!
Thanks!
I am suffering under the same issue! It is really annoying! HTC should immediately sovle this problem!
Sounds a bit like my thread here: http://forum.xda-developers.com/showthread.php?p=3950507
I copied manila.exe from windows to my start-up folder, now it works fine.
yeah i have the same problem its really annoying. it works about 90% of the time now when i copied the manilla.exe to start up folder. before that i tried to put the phone in airplane mode before booting but that worked like half of the time.
Schijthoos said:
I copied manila.exe from windows to my start-up folder, now it works fine.
Click to expand...
Click to collapse
Does the time on the tf3d homescreen update ok when you use the manila.exe shortcut?
touch flor not loading
My phone is hanging again. I can't get it to load Touch Flo 3D. I get this message that it's trying to activate handsfree network and then it says connected and reboots and goes through the same thing 2 or 3 times. I hard reset back in Dec cause of this and then the same thing happened again about a month ago and out of the blue it loaded touch flo and fixed itself.
But this time it's been a couple days and my phone is so slow it's crazy. It's been trying to remove one program for 20 minutes. I thought removing a few programs might help instead of doing another hard reset but it looks like i'm gonna have to do one more.. I haven't added anything new lately. And I even got a message saying your phone can not boot up because of a program from an untrusted source or something else and it wants me to hard reset. It says press volume up to reset or any key to continue and then it goes to that hands activation screen.
Iv'e tried enableing and disabling bluetooth. Sprint store said I have a bad phone cause of that hands free actication message I keep getting and they want to order me aother phone but it's going to be a refurb so I guess i'll hard reset.. Something is causeing it to hang and not load and I don't know what it is.. But I came here and I tired puttingmy phone in airplane mode and rebooted nothng. I have unchecked and checked touch flo and rebooted..
But I went to windows and saw manilla.exe cause you guys said copy it to start up and I clicked on it and I saw my background and clock again but I don't think Touch Flo fully loaded and my task manager wasn't at the top and I ran clean ram cause it was still slow and it said it freed up 32mb but then my screen went black again. I put it in airplane mode once more and took out the battery. But when I never pasted the manila to start up should I do that? I just clicked on it and saw where my clock and background were back but my clock was off by like 15-20 minutes.. I'm sure I'll probablyt have to hard reset but wanted to ask around a couple more times before doing one.. Rose
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Same thing happened to me.. Touchflo wouldn't load phone was so slow hands free message kept coming and saying connected and rebooting. I did a hard reset and was good for a couple months then out of the blue on day it did it again. I turned off phone and left battery off overnight and just got lucky and the next day as I was getting in my car it came back on.
But then a few weeks later it did it again and I took it to a Sprint store. I was told that the handsfree activation is something that only happens once when you 1st get a new phone and they said my phone was defective. They were going to order me another one but it was going to be refurbed so I never picked up and just dealt with a hard reset once again. Don't know what causes this but I've had my phone reset for over a week and I just now tonight started putting apps back on cause I was afraid ut had to do with something I installed I really don't know what causes it.. But my touchflo wouldn't load at all compeltely black screen no today screen at all and boy was my phone slow. I went to windows and clicked on manilla.exe also and saw my today screen but it was still slow and not completely loading up to touchflo like you said. And then I read about putting it in airplane mode turning off BT nothing worked for me this last time so I did a heard reset again..
Maybe someone else knows what causes this but I'm leary and am not going to put everything back on my phone that was on there but I've put most everything back.. Sorry I wasn't much help but same thing for me hands free siad connected and would reboot and over and over.. I kind of want an Android phone now and I don't think Sprint should of offered me a refurb when I just bought this in Sept and it's an expensive phone. But oh well things happen.. Good Luck!
killerz298 said:
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Click to expand...
Click to collapse