Is anyone else having the problem where after a soft reset(or a manual shutdown/restart) touchflo3d doesn't autostart?
It happens to me about 50% of the times I reset, but I jus thave to switch it off again and on again and usually it works fine.
Totally different, but I have this sometimes with Touch Flo 2D on my TyTn II. I usually get it if I've installed to much, It always launches if I haven't got the Micro SD card in though.
I've had this happening to me since I got it, and after a few hard resets it still happens... Seemingly at an increasing frequency too.
Yup, I'm experiencing the same problem.
It's really annoying, and more people are having this issue.
There's already a thread about this.
What works for me most of the time is this:
- Disable TF3D in settings.
- Soft reset device with power button
- Enable TF3D again
- Sometimes TF3D starts now, but if not reset again.
I can't wait for a more stable and fast cooked rom
Hope this helps
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
aiaob said:
Oh Sorry, I couldn't find the other thread. I just keep resetting and hopee it randomly decides to starts. Love this phone, just a few things that really annoy me
The inability to find a way to make it autolock(not standby) after X seconds for example. If anyone can help with that, I'd greatly appreciate it.
Click to expand...
Click to collapse
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
i have had this happen a couple of times as well.
quarintus said:
DId you install any apps?
These kind of problems are mostly caused when 2 programs interfere with eachother. Teh reason why one time it does start up and the other time it doesn't is the sequence of programs starting up. Most of the time touch flow 3d will start later (because it's so big)
Click to expand...
Click to collapse
I doubt it's caused by that. I've hard reset it installed core and tomtoma nd had it happen..
and I'm sure it's not just slow to start up, I've tried making calls and simply leaving it for 10 minutes and it still doesnt start up.
It only started haooening to me after I instaled software.
I guess the best thing to do right now, is to install all software with touchflo disabled, then reboot completly the device to finalize the instaltion, and then reboot it again. Now you can reactivate Touchflo again.
This "trick" has worked perfectly on my Pro 2
HastaSSSS
disable startup
Many programs that you install will leave a startup file in the windows\startup directory. Try cutting and pasting them to some temporary directory. I did that with poutlook and slovoed and the problem has gone away for me, without in any way impairing my calendar/contacts or slovoed functioning.
I got the same problem too.. soft resetting a few times do it or disable/re-enable on Personal-Today Items screen
Kinda annoying
Same problem here. Spoke to HTC today and tol them there were more people having this problem. Mine is so serious that it won't start at all! HTC says I was the first and ONLY one in the world with this problem. They told me that if there were more people having this issue they should CALL HTC. It's free to call them... please do so in finding a solution!
Thanks!
I am suffering under the same issue! It is really annoying! HTC should immediately sovle this problem!
Sounds a bit like my thread here: http://forum.xda-developers.com/showthread.php?p=3950507
I copied manila.exe from windows to my start-up folder, now it works fine.
yeah i have the same problem its really annoying. it works about 90% of the time now when i copied the manilla.exe to start up folder. before that i tried to put the phone in airplane mode before booting but that worked like half of the time.
Schijthoos said:
I copied manila.exe from windows to my start-up folder, now it works fine.
Click to expand...
Click to collapse
Does the time on the tf3d homescreen update ok when you use the manila.exe shortcut?
touch flor not loading
My phone is hanging again. I can't get it to load Touch Flo 3D. I get this message that it's trying to activate handsfree network and then it says connected and reboots and goes through the same thing 2 or 3 times. I hard reset back in Dec cause of this and then the same thing happened again about a month ago and out of the blue it loaded touch flo and fixed itself.
But this time it's been a couple days and my phone is so slow it's crazy. It's been trying to remove one program for 20 minutes. I thought removing a few programs might help instead of doing another hard reset but it looks like i'm gonna have to do one more.. I haven't added anything new lately. And I even got a message saying your phone can not boot up because of a program from an untrusted source or something else and it wants me to hard reset. It says press volume up to reset or any key to continue and then it goes to that hands activation screen.
Iv'e tried enableing and disabling bluetooth. Sprint store said I have a bad phone cause of that hands free actication message I keep getting and they want to order me aother phone but it's going to be a refurb so I guess i'll hard reset.. Something is causeing it to hang and not load and I don't know what it is.. But I came here and I tired puttingmy phone in airplane mode and rebooted nothng. I have unchecked and checked touch flo and rebooted..
But I went to windows and saw manilla.exe cause you guys said copy it to start up and I clicked on it and I saw my background and clock again but I don't think Touch Flo fully loaded and my task manager wasn't at the top and I ran clean ram cause it was still slow and it said it freed up 32mb but then my screen went black again. I put it in airplane mode once more and took out the battery. But when I never pasted the manila to start up should I do that? I just clicked on it and saw where my clock and background were back but my clock was off by like 15-20 minutes.. I'm sure I'll probablyt have to hard reset but wanted to ask around a couple more times before doing one.. Rose
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Same thing happened to me.. Touchflo wouldn't load phone was so slow hands free message kept coming and saying connected and rebooting. I did a hard reset and was good for a couple months then out of the blue on day it did it again. I turned off phone and left battery off overnight and just got lucky and the next day as I was getting in my car it came back on.
But then a few weeks later it did it again and I took it to a Sprint store. I was told that the handsfree activation is something that only happens once when you 1st get a new phone and they said my phone was defective. They were going to order me another one but it was going to be refurbed so I never picked up and just dealt with a hard reset once again. Don't know what causes this but I've had my phone reset for over a week and I just now tonight started putting apps back on cause I was afraid ut had to do with something I installed I really don't know what causes it.. But my touchflo wouldn't load at all compeltely black screen no today screen at all and boy was my phone slow. I went to windows and clicked on manilla.exe also and saw my today screen but it was still slow and not completely loading up to touchflo like you said. And then I read about putting it in airplane mode turning off BT nothing worked for me this last time so I did a heard reset again..
Maybe someone else knows what causes this but I'm leary and am not going to put everything back on my phone that was on there but I've put most everything back.. Sorry I wasn't much help but same thing for me hands free siad connected and would reboot and over and over.. I kind of want an Android phone now and I don't think Sprint should of offered me a refurb when I just bought this in Sept and it's an expensive phone. But oh well things happen.. Good Luck!
killerz298 said:
I was sitting in my den and my friend said he texted me but I didn't get it. I went to check my phone and it seemed ok but no text. I then went to make a phone call and it hung. I went to turn it to airplane mode and it froze. When I restarted it, now I get the black screen with the top and bottom menu bar but no touchflo 3d loading. I get some weird hands free activation message and then it says successful and reboots my phone. When the phone starts back up it is in the same condition without touchflo 3d and the reboot loop continues unless I click cancel.
If I run manilla.exe it will boot up and my today screen will come back but it is SLOW and it doesn't seem to have completely loaded.
WTF happened and how do I fix this?
Click to expand...
Click to collapse
Related
hi guys,
has anyone experienced a problem where their Trinity will not "wake up" with the short press of the on/off button?
I'm sure I read about this some time ago and am trying to work out if it's hardware or OS related.
I'm running mUn's TE WM6 which I have been for many months now.
The problem has only started in the last 2 weeks or so.
I haven't installed anything new, but have enabled Push Mail for OTA mail.
It's doing it 1 or 2 times a day now and is very frustrating. The only way to wake the phone is soft reset.
When calling the phone from a landline, it does not ring and goes to voicemail.
Any advice or solutions gratefully received.
no one seen this then I guess.
Bummer (for me!)
Try hard reset
sickboy555 said:
hi guys,
has anyone experienced a problem where their Trinity will not "wake up" with the short press of the on/off button?
I'm sure I read about this some time ago and am trying to work out if it's hardware or OS related.
I'm running mUn's TE WM6 which I have been for many months now.
The problem has only started in the last 2 weeks or so.
I haven't installed anything new, but have enabled Push Mail for OTA mail.
It's doing it 1 or 2 times a day now and is very frustrating. The only way to wake the phone is soft reset.
When calling the phone from a landline, it does not ring and goes to voicemail.
Any advice or solutions gratefully received.
Click to expand...
Click to collapse
Try hard reset
softreset helps, sometimes i have the problem with windows mobile 5 too
jmermel said:
Try hard reset
Click to expand...
Click to collapse
thanks John.
But do you have any fact based reason for this suggestion?
I'm happy to give it a go if there's more than 50% chance it will work.
Hard reset
sickboy555 said:
thanks John.
But do you have any fact based reason for this suggestion?
I'm happy to give it a go if there's more than 50% chance it will work.
Click to expand...
Click to collapse
You might have loaded a program that is not liked. Use a backup program. If this does not work then load your backup after the hard reset and you will be back to where you started
P3600 with D810 WM6 ROM; also happens occasionally, recovered with soft reset. Seems to happen most often when I press the On/Off button twice too quickly.
thanks guys.
I'm going to try the hard reset route-I'll report back.
Some time ago this happened to me so often, but said it was due to some application, in my case was Slide2Unlock.
Since I removed by their consumption of memory it didn't happened to me.
(Sorry for my english)
Bugger, this has started to happen to me as well. Only 3 times in the last 3 days but if it keeps is up that will be enough for me to do a hard reset (overdue). Strange cause the only new thing I put on in the last week has been PCM 16 which is only a copy/paste exercise.
The fix in the Hermes forum is to force your device to sleep and not let it go into standby.
I have had some problems recently with DeviceLock 1.2 just ceasing to work and have to uninstall/reinstall to make it work again. I set it to turn the screen off when locked, as this does not put the device on standby, maybe there is the same issue with it going into standby by itself.
I have the same problem..i think that it has to do with the phone hanging..most probably due to some background programs eating too much power and memory and the phone just lacks till it hangs..happens when you have other programs that have hanged as well..my problem is with PocketAlarm..it takes so long to load my phone went to standby and the phone couldnt be called back..in brief the phone just hangs because of a program..i don think it has any problem do to with the hardware or strictly the OS..cant really explain..but the role the OS play in this problem is that it allows the program to make full use of the phone till the phone cant cope with it..its the core of the OS so it cant be avoided with any other versions or anything..sorry it seems rather unclear..hope you guys understand..
same problem for me ... from times to times, when a call hang up, i push a lot of times the red button for going back to the today screen and as it shows up, i click immediately on the Power button for turning off the screen. right after when i forgot to do something (approx 1sec) i push the power button and there it doesn't turn on the screen ... strange ...
what i've installed on it :
TomTom 6
BatteryStatus with today plugin ver 1.04.203 beta4 i put tray icons too.
i've bluezard for sniffing and/or hacking bluetooth devices.
OBDgauge too it's a software that works with a bluetooth dongle i plug into the diag port of my car.
and that's all. ah yes one more thing -> i disable the "HTC Home" because i don't like it.
Same problem here...
Still no solution?
I got this problem from some version of rom by Karmba. But V7.2 is OK so far. It seems happened when I close Egress reader by click X button then turn off screen by power switch. It then would not wakeup again. But if I close Egress and check the running programs from Task Manager to make sure the Egress is not running at the background, then I can turn on or off the screen freely.
So I think this wakeup problem is caused by some running program that was not closed properly by X button then crash the WM.
That was just my personal finding. Hope it help you guys a bit.
Hey everyone,
I am having an issue with my TP2.
Occasionally after calls the phone will turn itself off and a message pops up on the screen saying "a wireless radio must be attached to use the phone."
Then about 30 seconds or so (sometimes longer) it will pop back on and be ok.
The happens roughly 3/5 calls i take.
it is annoying, any ideas how to sort it out?
omggg i thought i was the only one...
and sometimes i cant get back to get any
service i have to soft-reset the phone..
is ANNOYING.
yea i have had to soft reset a couple times!
I have installed SPB mobile shell 3 and S2u2 unlocker thing.
Also Garmin Mobile XT.
Dont think any of these should cause any issues, but might help.
i bet the problem comes in S2u2
bcuz i didnt have this problem, it started
after installing S2u2.
interesting.
II have just uninstalled S2u2 and soft reset. i will see what happens.
any news ?
Yea sorry,
have been busy.
'
Well since uninstalling S2U2 i have stopped getting this issue, so thats good.
Guess it must be caused by it.
however it is frustrating without the lock program, and the other few lock apps i have tried are **** in comparison.
So i dunno if i will just install it again and put up with it or what.
it is pretty frustrating man.
Definately send your devices back from wence they came if a hard reset doesn't fix the issue
thedudelasse said:
Definately send your devices back from wence they came if a hard reset doesn't fix the issue
Click to expand...
Click to collapse
It is the S2U2 that was making it happen.
after i uninstalled it, then it didnt happen anymore.
Just to be clear, its not the device turning off, just the phone component.
So, I left my Artemis in my RAM Aqua Box waterproof phone case attached to my motorcycle while I ran into the store.
I came out, started the bike and started the ride home. That was when I noticed the white screen and my tunes had stopped playing. I've seen it happen before (while turning off the phone in camera mode, etc), but a simple soft reset always fixed it. Not this time...
For two days now I've flashed it back to factory, installed my latest ROM (twice), reconfigured all my settings, etc, only to have the phone seize up by fading to the White Screen Of Death. The only fix is to remove the battery and let it sit for a bit. I have found however I can get the phone to run longer if I put it in the freezer for 15 mins, then it runs as it should until it warms up.
Sometimes it will work for half a day, other times it will fade out even before the soft reset boots up again. It really doesn't like being plugged in to charge or sync.
Now for some more background info. It did get deathly hot in the case I have because it has a clear face, is sealed, and it was sunny. Also, I started the bike when the phone was plugged in. I've heard this is bad for the charging circuit, but I'm leaning to the overheating as being the seminal event of the start of my sorrows because I've started the bike/truck many times with the phone plugged in. Did my luck run out?
What have I done, and how do I fix it?
i have had a white screen problem on my phone to it would go like this when just left on or when wanting to flash it in boot mode i have taken both sim card and memory card out and i have found that the memory care is curupted and works fine now will have to formate the memory card in order for it to work properly in the phone again
htc artimis 02 orbit
Yes, you can remove your memory card.
Just had similar problem. Possible reason: ROM update. Possible solution - ROM changed again (different) and hard reset. Hopefully everything will be ok. Until now (9 hours) - it is!
SCREEN
Hello
sorry i speak english a little.My TC P3300 have a problem on screen.I replace the lcd screen because the old make a hole white every 5 s.With the new its the same.What happen
thanks
I have the same Problem I started getting the White screen when i try and access anything it hangs and then goes white screen I removed the sd 2gb and left the sim in and id stil did the same thing but now i put the 4gb out of my laptop and now it seems to work but i still get the power on problem sumtimes
Im running wm 6.5 Arte_WM65_23009_WWE_Fixed_IE_b1
Any sugeustions? help plz
i have same problem
Even I was facing the same problem. I did hard reset couple if times and didn't find a solution. So finally I gave the phone to the service center and it seems now it's been fixed. I will ask the service guys about the actual problem and would post it here.
It may help someone.
Now I am going to try android on my phone, wish me luck.
Regards,
Rajesh
rajeshrr said:
Even I was facing the same problem. I did hard reset couple if times and didn't find a solution. So finally I gave the phone to the service center and it seems now it's been fixed. I will ask the service guys about the actual problem and would post it here.
It may help someone.
Now I am going to try android on my phone, wish me luck.
Regards,
Rajesh
Click to expand...
Click to collapse
Did U ask the service guy abt the screen problem
This is the third time I have had this problem. Randomly my phone slows down to a halt, the data connection does not work, most setting icons take 10 minutes to load if they do at all yet my texts still work.
There are NO apps running in the task manager.
I have removed most of my programs.
My mods are just removing the TF3D crap, nothing serious.
My stock task manager icon is missing from the top right.
and when I rebooted the phone I would get two errors, one with opera and the other with ~pcom-something.exe"
The other times I reset to unit to "factory out of the box" but I am sick of resetting up the phone with my apps, mods and such.
Has anyone seen this before?
What rom do you have on your phone ? What do you mean by removing all the tf3d crap? And have you flashed different roms without using task29 in between? It sounds like its time to task29 and reflash.
Sorry, I removed the TF3D stuff with mostly registry edits. I am still on a stock 6.1 rom.
Well, it could be pretty work-intensive to try and track down exactly whats causing your slowdowns and freezes, and since you have had to keep on hard resetting it, I would think that you dont really have much to lose by flashing a new rom. If you like the stock 6.1, you could just download it from the Windows Mobile Rom Developement subforum. Alls you would have to do is hard spl your phone and then flash it, it should take less than an hour start to finish, including downloading the rom.
Also:
My stock task manager icon is also missing from the top right.
and when I rebooted the phone I would get two errors, one with opera and the other with ~pcom-something.exe"
I can set this back to a stock ROM with the phone itself and I have all my apps on my card. Doing all the registry things is a pain only because I did not memorize them... YET, haha.
Is there a better task manager to see whats eating up resources?
If you're running the ROM that actually came stock on the Tilt II, then the hot fixes for the issues you are describing can be found here on HTC's website.
http://www.htc.com/us/support/tilt-2-att/downloads/
I'm on verizon, will it matter?
Mother F-er.
Just rebooted to try and get the errors again and instead got this:
"The device is unable to boot because either you have turned off the device incorrectly or tired to install an application from untrusted source.
Press Volume Up to reset your device or press any other button to cancel.
The operation will delete all of your personal data and restore the device to it's factory default settings."
I guess my decision is made, but wow I am not happy. This phone may go into a lake.
... edit:
Volume up does not do anything. AWEsome.
Yeah it matters, here are some Hot fixes for you're touch pro II. Don't know if they will help ya though: http://www.htc.com/www/supportdownloadlist.aspx?p_id=250&act=sd&cat=all
I took the battery out again and put it back in. Same message and the volume up did not work again.
So I pressed volume up about 100 times then held down the power button. Nothing changed.
Then.... I slide open the keyboard and closed it. Put the unit down and about 45 seconds later I heard all 100 volume up presses in a row. The stock WM volume menu was over the windows boot screen, and then the task bar showed up. Then the unit shut off and rebooted but took forever. It looked normal , but SLOW.
Now:
"A problem has occurred with Opera9.exe"
then:
"A problem has occurred with cprog.exe"
WTF is going on. I have not installed/uninstalled ANYthing for weeks.
set the phone to factory defaults last night and changed everything back. Meh.
Thanks for the ideas guys and I will be doing those "hotfixes" very soon!
Cheers,
Dan
Well, this phone is doing it yet again.
It barely works.
everytime I press something it takes between 5 seconds and 1 minute to do it.
i have no signal
most programs do not even try to start
resets change nothing (done this about 100 times today)
What the hell is going on with this phone? This was just as random. Was working as normal until around noon and then it just slowed way down and I could not make calls or answer them.
Grr.
so:
when I reboot the phone, I have the green start up screen for ~5 minutes.
the phone does not work after it fully starts up.
I can not open "remove programs"
I do not have the task manager in the top task bar, but when I go into settings and open task manager, there is nothing running.
I run "cleanRAM" on level 3 and there is no change.
It is still very slow I have not installed anything new at all, so this sudden change reasoning is unknown. This may be my last windows phone as I am growing tired of these random major failures.
Well verizon sent me a new phone.
*PHUCK*, its WM6.5 and I hate it.
I am currently experiencing a few problems with my TP2. It all started when I went to a friends house and the phone started roaming and I did a soft reset.
-Ever since then TouchFlo 3D will not launch.
-The device is extremely slow.
- "Fennecfaststart.exe" cannot be opened. Either it is not signed with a trusted certificated.....(I think I had this error before everything happened)
I had this same issue when I went to my friends house but I after the night TouchFlo 3D was up and running by morning and the phone was normal but this time that didnt happen. I left the phone off for about 2-3 weeks and still the issue is still there.
I was getting a error where it told me the device was properly shut off and I have to do a hard reset or I can push any other key to cancel and I would cancel everytime it happened about 5 times but that message stop popping up.
So does anyone know what I can do to fix this ? The old 700wx im using isnt that great lol.
Thanks in advance
__________________
I had something similar I just hard reset and reinstalled my programs from scratch...didn't take very long, and I was smart enough to save all contacts to SIM