Related
Anyone on here using MyMobiler?
I'm using Duttys 1.6 and when I move my mouse onto the phone (rather than using the desktop view), I cant see the mousepointer on the phone. Anyone else have this problem?
It worked OK on my old Orbit but that had a "Mouse" option in settings somwhere.
Tirinoarim said:
Anyone on here using MyMobiler?
I'm using Duttys 1.6 and when I move my mouse onto the phone (rather than using the desktop view), I cant see the mousepointer on the phone. Anyone else have this problem?
It worked OK on my old Orbit but that had a "Mouse" option in settings somwhere.
Click to expand...
Click to collapse
I have never seen the mouse pointer on the phone. I didnt think it worked that way at all
Yes it used to do that on my old phone, not tried it on the Touch, no longer have XP.
Can you drag your mouse over to the phone at all ? I remember that i used the exact same function .. they actually disabled the function in newer version! Have a look in the config file.. i found the setting once and enebled it, and wolla ! all working again..
mallman said:
I have never seen the mouse pointer on the phone. I didnt think it worked that way at all
Click to expand...
Click to collapse
If you right-click on your PC MyMobile icon and click "Connect" (rather than double-clicking to open the window on your desktop), then change "Mouse Cursor To" from "Disabled" to either "Left" or "Right", when you then move your PC mouse off the "Left" or "Right" of your screen, it should move onto you phone.
It does seem to work (clicking opens menus, runs apps etc), you just cant see your mouse pointer.
Yes, I am using MyMobiler in the same version and it works with no problems. Also after I change from a vogue to the blackstone.
Only the skin-mode doesn't work for me.
Elim said:
Yes, I am using MyMobiler in the same version and it works with no problems. Also after I change from a vogue to the blackstone.
Only the skin-mode doesn't work for me.
Click to expand...
Click to collapse
i agree there, skin mode doesnt work for me, otherwise it works perfect on my machine
So you both see a mousepointer on your phone?
Hi
I have My Mobiler and I see a mouse pointer on the phone image on the laptop screen.
I have in My Mobiler the option "Mouse cursor to" set to disable. I have never looked at this option before (!!) but it all works fine for me.
I open Mobiler and I have a working mouse that scans across the laptop and onto the image of the phone. On the phone image I'm able to activate various options with the mouse including tap and hold.
Regards, D
HD Skin
Hmm, strange. I see the pointer on my phone occasionally but its very "flickery", I'll try a soft-reset see if that fixes it.
In the mean time, attached is an HD skin I just knocked together.
There's also a Touch HD skin on the MyMobileR forum if you search for mymobiler touch hd skin in Google.
mallman said:
i agree there, skin mode doesnt work for me, otherwise it works perfect on my machine
Click to expand...
Click to collapse
If you want a working skin mode, you can use EveryWAN Remote Support
from Sparus Software.
I am one of the developers and we made it free for all.
WOW! that is genius! MyMobile was flaky at best for me, and was of limited use. Just installed EveryWAN (about 30 mins ago) and haven't stopped playing since! Great tools - esp. the macros. Many thanks for providing this to the community.
The second time I went to use it, my Touch Pro started to "click", and on my PC, I got the error message...
"An unhandled win32 exception occurred in MyMobiler.exe [2772]".
Tirinoarim said:
Hmm, strange. I see the pointer on my phone occasionally but its very "flickery", I'll try a soft-reset see if that fixes it.
In the mean time, attached is an HD skin I just knocked together.
Click to expand...
Click to collapse
Works beautifully, great work
How it works
Hi
1. Get mymobiler up and running.
2. Set (e.g.) mouse cursor to right
3. Close mymobiler BY USING THE "X" BUTTON
4. Move cursor off right hand side of computer screen.
Voila
I could'nt get the latest version of MyMobiler working on my Topaz - installed "EveryWAN Remote Support Personal Edition" - its a breeze - everythings working fine.
Hey, ive done a bit of searching but got no finds only people asking how to move the camera as well. One find did point out that the game doesn't worth with Gsen, or at least not out of the box.
I have a Gsen program for making it act like a dpad but that did not allow me to move the camera either.
Any other ideas? Anyone got it working at all?
try moving the white box in the overall view...
i think there are some arrow keys which you use to move the camera (if i can remember correctly).
Draggin around the white box doesn't work and there are no arrows either :/
any other ideas?
sorry for the late reply my pc was screwed up.
Touch the border of the screen ? or use gpad to emulate dpad, that's what i do for the game call the Quest and it works well. hope it helps.
N'da said:
Touch the border of the screen ? or use gpad to emulate dpad, that's what i do for the game call the Quest and it works well. hope it helps.
Click to expand...
Click to collapse
Neither work
Gpad config for AOE
Try this config option for gpad:
FOR AGE OF EMPIRES
<ExeName>aoeppc.exe</ExeName>
<CenterY>0</CenterY>
<DeadZoneY>10</DeadZoneY>
<DeadZoneX>10</DeadZoneX>
<MaxY>40</MaxY>
<MaxX>40</MaxX>
<KeyMethod>SendMessage</KeyMethod>
<MaxKeyTick>1</MaxKeyTick>
<MinKeyTick>10</MinKeyTick>
</Application>
erm, how do i do this? Im unsure how to file. I have the config file on my phone which opens in IE and i have a note pad one. Im presuming changing the note pad one wont do anythin?
:EDIT:
I edited the XML file to add in what you said but now the program doesn't load insteaD :/
I tryed adding "<application> before the text you wrote but taht didn't work either.
:EDIT:
Ahaha! got it working, didn't relise i had to capitalize the A lol. Alas it doesn't work with teh game and appears that when running gpad with the game makes the calibration of the touch go totaly off.
:EDIT:
restarted phone and it worked. Cheers mate¬!
AOE in Gpad
Yaaaaaay
Hi,
I was wondering if anyone knows of a tweak that lets you use the keyboard on games and emulators such as Morphgear or other apps to simulate hard keys. I had a look on the Touch Pro forum and came across a nice program that enables you to use certain keys for Morphgear, the downside is that some of the keys get a little mixed up which I assume is a compatibility problem or hardware difference. But the concept is there. It's just that with the lack of a D-Pad making use of the keyboard for things other than typing would be really useful. If there isn't one out yet, do you think someone will come up with one in time.
Link to the Touch Pro tweak - I've tested it and other than than the keys get a bit mixed up it works
http://forum.xda-developers.com/showthread.php?t=425646&highlight=morphgear
Hi, when you tested the kfortouchpro app on your Rhodium was it playable?
disable eT9 and it works
Hi,
disable eT9 and it works:
You want to disable eT9. Go into the registry and change to this:
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
then soft reset. that disables eT9 and leaves you with the windows mobile standard IME.
http://forum.xda-developers.com/showthread.php?t=469486
Than you can remap buttons with ae button.
I had the same problem, my first solution was described here:
http://forum.xda-developers.com/showthread.php?t=531823
with the ability to kept eT9, but it wont work with emulators like Gen PPC.
Hope it helps you.
I downloaded KforTP (do a search, can't remember where from). You can select the kb setting you want without having to soft reset. Works perfectly for me when using the smartgear emulator.
Thanks Bub3D. I tried your first solution and it worked, at least in morphgear - genpp doesn't seem to recognise the keys on one side of the keyboard.. Just out of interest, have I actually disabled anything that I might use? Everything seems to work, but what does eT9 do?
I have tried GenPP unsuccessfully. Morphgear SNES works but not the genesis module. Anyone any ideas? It seems to load up games but then black screen when it gets past the title screens. Also crashes the device sometimes when doing this.
I'd happily pay good money for a decent genesis emulator on the TP2 if anyone knows of any.
I'm looking into a new phone and one thing I would really like is the ability to play old games such as those found on MAME, SNES, and GBC. Unfortunately, the state of Windows Mobile game emulation has not progressed much in the past two years. With many phones now abandoning the D pad and screen resolution now higher than what some emulators can manage, programs that worked marginally for my 8125 are reported not working on newer devices. As WM moves on to WM7, I left wondering if any emulators will be left. I noticed that the Iphone and Android phones have emulation development ongoing. Perhaps it is the challenge of getting something to work on something new. I have no programming skills whatsoever so I'm left tapping away on a keyboard lamenting the fact that my next probable phone won't be as fun as I had hoped (since other phones do not suit my productivity needs or exceed my budget for overall cost of ownership). Hopefully, some of these tweaks listed above will work for the TP2 for AT&T's version.
kfortouchpro is NOT needed on this device for morphgear...
in morphgear:
o go to any button config screen
o when assigning the buttons hold down CONTROL while hitting the key
o go to global options menu
o enable 'polling' method
o enjoy!
SmartGear also works without any special tricks at all.
home: http://www.bitbanksoftware.com/SmartGear.html
youll want to go through the forums to get the REAL latest version:
http://www.modaco.com/content-page/...o-gameboy-emulator-for-sp-beta-test/page/940/
I've got a question. I'm using Morphgear, but I can't play some games, because I don't have multitouch on my phone. That's why I can't do, for example, uppercut in Mortal Kombat, which requires two buttons pressed at the same time. I would like to map some button to the buttons on my phone - for example red headphone, green headphone, the volume buttons, etc. It would be great. I tried some applications like AE Button or Dred Sensor, they work with typical using the phone, but not in Morphgear. When I try to map the keys in options, it looks like the are mapped, but they don't work in any game. Is it possible to do that? I don't want to buy external bluetooth controller, I want to use the buttons on my phone.
kamiledi15 said:
I've got a question. I'm using Morphgear, but I can't play some games, because I don't have multitouch on my phone. That's why I can't do, for example, uppercut in Mortal Kombat, which requires two buttons pressed at the same time. I would like to map some button to the buttons on my phone - for example red headphone, green headphone, the volume buttons, etc. It would be great. I tried some applications like AE Button or Dred Sensor, they work with typical using the phone, but not in Morphgear. When I try to map the keys in options, it looks like the are mapped, but they don't work in any game. Is it possible to do that? I don't want to buy external bluetooth controller, I want to use the buttons on my phone.
Click to expand...
Click to collapse
to get mine to work i simply mapped the keys using the on screen(pop-up form the bottom) keyboard rather than the physical keyboard. it then worked on the physical keyboard. I got this method somewhere on the forums not sure where.
So, you mapped the keys to the keyboard and then you were able to use for example volume buttons on the phone to control the game? That's what I want to do.
ok so i know it's easy to remap the ptt button to a program but i have a challenge for those that are up to it. can anyone remap the ptt button to actually take pictures within the camera program? let the challenge begin!
dirtybirdphoenix said:
ok so i know it's easy to remap the ptt button to a program but i have a challenge for those that are up to it. can anyone remap the ptt button to actually take pictures within the camera program? let the challenge begin!
Click to expand...
Click to collapse
You can try the Rhodium Key Remapper, details on THIS thread
It claims to be able to remap ANY hardware key on a Rhodium to just about any function you could imagine...but I don't have a Tilt2 to test out the PTT button to confirm. You're welcome to give it a shot though!
dirtybirdphoenix said:
ok so i know it's easy to remap the ptt button to a program but i have a challenge for those that are up to it. can anyone remap the ptt button to actually take pictures within the camera program? let the challenge begin!
Click to expand...
Click to collapse
... and how about having the PTT button take a picture only if the camera is active -- otherwise it retains whatever other useful function it's mapped to (for example, mine is currently mapped to rotate the screen).
pistou said:
... and how about having the PTT button take a picture only if the camera is active -- otherwise it retains whatever other useful function it's mapped to (for example, mine is currently mapped to rotate the screen).
Click to expand...
Click to collapse
that's good i like that idea! i wish this thread got some heat so the developers took notice, i would like a firm answer i don't like installing a program just to findout it doesn't work
OK, so I just had a bit of a play around with the Rhodium Keyboard Controller, and indeed you can configure a key to perform a specific action depending on the application running at the time (or at least that's my interpretation of it).
While I was able to get the config to the point of "OK, the camera is running, what do you want the PTT button to do?", but could not figure out how to specify the "take a picture" action.
pistou said:
OK, so I just had a bit of a play around with the Rhodium Keyboard Controller, and indeed you can configure a key to perform a specific action depending on the application running at the time (or at least that's my interpretation of it).
While I was able to get the config to the point of "OK, the camera is running, what do you want the PTT button to do?", but could not figure out how to specify the "take a picture" action.
Click to expand...
Click to collapse
thats the challenge i'm putting out there, i want to have the ptt button actually take a picture while in camera mode
will anyone accept this challenge?
pistou said:
OK, so I just had a bit of a play around with the Rhodium Keyboard Controller, and indeed you can configure a key to perform a specific action depending on the application running at the time (or at least that's my interpretation of it).
While I was able to get the config to the point of "OK, the camera is running, what do you want the PTT button to do?", but could not figure out how to specify the "take a picture" action.
Click to expand...
Click to collapse
the action is simply 'ok' or enter. I haven't tried the app but on a Fuze the center of the dpad is essentially the enter key and that will trigger a photo to be taken
I've used the remapper and my PPT opens the camera and takes pictures
It works fine, just try it out. The problem is that the key is on the bottom of the phone when held like it is supposed to be and it also does not have the semi-click focus ability (though when you click it it will focus and then take the shot, though that takes a long time)
bugsykoosh said:
the action is simply 'ok' or enter. I haven't tried the app but on a Fuze the center of the dpad is essentially the enter key and that will trigger a photo to be taken
Click to expand...
Click to collapse
For the key remapping, I've had success mapping it to "Enter" (couldn't find "OK" in the list of keys to map to). Attached is a snap of the configuration with the Rhodium keyboard controller.
petard said:
It works fine, just try it out. The problem is that the key is on the bottom of the phone when held like it is supposed to be and it also does not have the semi-click focus ability (though when you click it it will focus and then take the shot, though that takes a long time)
Click to expand...
Click to collapse
Yes, that's true. What might be possible is to map the focus to a short press of the key, and the "snap" to a short press. I'm too lazy to figure out how.
Sparkz914 said:
I've used the remapper and my PPT opens the camera and takes pictures
Click to expand...
Click to collapse
By 'remapper' do you mean the Rhodium Keyboard Controller, or something else? I'd like this too, touching the screen to take a picture is moronic.
Duh, why didn't I try that before! Sure enough, set the PTT to be Camera in AEButtonPlus and it sure does take the picture too! Awesome.
dirtybirdphoenix said:
ok so i know it's easy to remap the ptt button to a program but i have a challenge for those that are up to it. can anyone remap the ptt button to actually take pictures within the camera program? let the challenge begin!
Click to expand...
Click to collapse
I probably don't understand what you're asking for... but I do have assigned my PTT Button to Camera (form settings, personal, buttons, scroll to Camera - on stock ATT ROM) and I do take pictures within the camera program just by pressing the PTT button. If I misunderstood your post, disregard...
They are talking about this cab
It is a little program to allow you to remap the hardware keys. You can even program functions or programs to double and tripple clicks as well. Don't be scared to install software, especially something this small. And if you are a OCD patient, then purchase Sprite Backup.
Now to answer the posters question: You have to have the camera running first to take a picture. If you want you could set camera start for a double PTT click and assign take picture to a single PTT press. Use attached program to accomplish this easily.
khaytsus said:
By 'remapper' do you mean the Rhodium Keyboard Controller, or something else? I'd like this too, touching the screen to take a picture is moronic.
Duh, why didn't I try that before! Sure enough, set the PTT to be Camera in AEButtonPlus and it sure does take the picture too! Awesome.
Click to expand...
Click to collapse
Yes I used the Rhodium Keyboard Controller to set up my PTT to use the camera it was pretty simple
From what I've read - as of 4 or so weeks ago - due to new camera updates... the standard remap to capture is no longer working...
if u can find energyrom may 1st version rhodiumkeymapper will work anything newer and it wont work as camera "shoot" button because of the new camera package but the speed increase is incredible..im running the latest n greatest june version of energy now.
Any Idea where I might roll back ROM... I think I'm pushing the ROM envelope... my tilt2 is zippy but bugging out on me...
Worked on reg settings for a while trying to fix capture issue... got it to work (even tried combo with mute button) but rebooted and haven't been able to reproduce. My theory was "if I could eliminate the delay focus could just get it to capture. No dice.
correct me if im wrong but i tried high n low to make my ptt button "shoot" but no dice.. ever since i flashed an energy rom newer than may 1st. its to do with the camera package that energy replaced i believe its topaz camera now on june 19th version.
Try this solution?
from this thread: http://forum.xda-developers.com/showthread.php?p=6600483#post6600483
zyphuris55 said:
Install the keyboard controller for the rhodium, choose to add a key, press the PTT key "if you already have it mapped to something, don't worry. I also have apps mapped to the same button". When in the map config, click the [+] next to Rule. pull out the stylus, click the windows button, go to your camera, and stick the stylus back in. Below "Rule name" the window should say "IACSP20_Main" without the quotes. Choose "Direct key mapping", then select key "13 Enter" for the key. Finally send the key to the operating system.
What this does is: while you're in the camera window and push the PTT key, that key is pushing the enter key. It acts the same as the onscreen shutter button, as in, you have to hold the button. Good luck with your mapping.
Click to expand...
Click to collapse
I haven't tried it yet, but it seems to be the answer you are looking for. Hope it helps.
Edit: I tried it and it works for me I also followed these directions to remap the volume up and down to do the same thing (they didn't do anything in camera mode anyway) and I like using them better. It has also helped with the quality of photos because I can hold the camera more still Yeah!
What version of the Rom... I tried something like this it didn't work - newer than May 1st... no work that's why...
https://docs.google.com/leaf?id=0B1VD5urJF8c-YzMxOWNlYWYtODFhMi00NWRkLWIyMzMtMDU3YTExM2RlNjli&hl=en
It is the latest updated version of Dosbox from adosbox.googlecode.com, with keys mapped to match the G2 keyboard. It's my first actual packaged Android app, so hopefully I didn't screw anything up.
Mouse support is disabled, only the left ALT key works to access extended characters, and the ALT key seems to become stuck if you hold it down for too long, but you can un-stick it by pressing it once and releasing.
The track pad is a little too sensitive for my liking, but a few CGA games I tried seem to work well (Telengard, Ultima IV, Legacy of the Ancients.)
You'll need to put DOSBOX.CONF from adosbox.googlecode.com in the root folder of your sdcard.
I don't make any promises as to whether this works or how well it works!
*edit*
Just to clarify, this is not MY port, all I did was take someone else's hard work and fix keymappings for the G2.
Also, no matter what you set the CPU cycles to, it seems to run as fast as it possibly can. It consumes 100% CPU usage and does not hibernate in the background when you switch apps, so be careful!
*/edit*
sweet!
DOSbox!
thx
Has this worked for anyone?
This worked for me, which is great. Made it easier to play with.
It is a tad slow, and there is no sound, but hey, it's dosbox on a friggin cell phone!
The real problem with this port is the lack of a good way to do savestates in DosBox. Since the video hardware can be weird and restoring its state can be tricky there is no official support for saves states in DosBox at all, although there have been some patches.
Anyway, I'm getting off topic here. Thanks for the work fixing the keyboard.
How did you do this? I have a motorola Flipside and I would like to fix the adosbox key mappings for it. Is there anything I can do with settings like the Mapper.txt file, or does it require modifying the code? (I know its not the best phone but my family is on att and they are paying the bill)
I was able to work around not having colon by using this keymap file: http://forum.xda-developers.com/showthread.php?t=837002 and then changing SEARCH to SEMICOLON
Other then this i didn't see any other characters that weren't there (even though some were presented incorrectly)
I am new to adosbox, does this mean I could finally run windows 3.1net on my G2? Lookout ms paint, here I come!
Wait, no mouse? Bummer.
Sent from my HTC Vision with CM 6.1 and Pershoot's Kernel.
keenerb:
How did you modified the bindings? I've changed left and right arrow keys mappings to shift and dot in mapper-0.74.map but it has disabled trackpad x axis
And do you know which codes have these two shortcut keys (that ones with three dots and numbers)?
I'm trying to remap keys for adosbox 0.2.5
Greetings.
----------edit---------
I've managed to change the:
Left FN - it's recognised as Left alt key
Left Shift
Tab
...as 3 of 4 arrow keys.
This disables trackpad scrolling however.
But it let's for playing dos games like Hocus Pocus and so on where you need arrow keys.
Do you (or anyone) know what are the numbers of following keys?:
Keyboard menu key
Shortcut key 1
Shortcut key 2
Search key
Sym key
We've got much room to bind.
Or maybe anyone knows where or how to check those numbers?
I know you are not the original author of the android port of DOSBox but I just cannot get any replies from the person listed as the author and I need to find out how to change things like the display resolution, etc.and thought you might know.
I have a dos program that runs fine on my DOSBox 0.74 installed on my Windows 7 laptop. But every time I try to run it on aDOSBox installed on my rooted android 2.3.4 phone, aDOSBox crashes and throws me out into android. I need to find out how to find out what is causing the crash. I think it might be the display but am not sure. Can you help?
Thanks.