MyMobiler (1.23) - Touch HD Themes and Apps

Anyone on here using MyMobiler?
I'm using Duttys 1.6 and when I move my mouse onto the phone (rather than using the desktop view), I cant see the mousepointer on the phone. Anyone else have this problem?
It worked OK on my old Orbit but that had a "Mouse" option in settings somwhere.

Tirinoarim said:
Anyone on here using MyMobiler?
I'm using Duttys 1.6 and when I move my mouse onto the phone (rather than using the desktop view), I cant see the mousepointer on the phone. Anyone else have this problem?
It worked OK on my old Orbit but that had a "Mouse" option in settings somwhere.
Click to expand...
Click to collapse
I have never seen the mouse pointer on the phone. I didnt think it worked that way at all

Yes it used to do that on my old phone, not tried it on the Touch, no longer have XP.

Can you drag your mouse over to the phone at all ? I remember that i used the exact same function .. they actually disabled the function in newer version! Have a look in the config file.. i found the setting once and enebled it, and wolla ! all working again..

mallman said:
I have never seen the mouse pointer on the phone. I didnt think it worked that way at all
Click to expand...
Click to collapse
If you right-click on your PC MyMobile icon and click "Connect" (rather than double-clicking to open the window on your desktop), then change "Mouse Cursor To" from "Disabled" to either "Left" or "Right", when you then move your PC mouse off the "Left" or "Right" of your screen, it should move onto you phone.
It does seem to work (clicking opens menus, runs apps etc), you just cant see your mouse pointer.

Yes, I am using MyMobiler in the same version and it works with no problems. Also after I change from a vogue to the blackstone.
Only the skin-mode doesn't work for me.

Elim said:
Yes, I am using MyMobiler in the same version and it works with no problems. Also after I change from a vogue to the blackstone.
Only the skin-mode doesn't work for me.
Click to expand...
Click to collapse
i agree there, skin mode doesnt work for me, otherwise it works perfect on my machine

So you both see a mousepointer on your phone?

Hi
I have My Mobiler and I see a mouse pointer on the phone image on the laptop screen.
I have in My Mobiler the option "Mouse cursor to" set to disable. I have never looked at this option before (!!) but it all works fine for me.
I open Mobiler and I have a working mouse that scans across the laptop and onto the image of the phone. On the phone image I'm able to activate various options with the mouse including tap and hold.
Regards, D

HD Skin
Hmm, strange. I see the pointer on my phone occasionally but its very "flickery", I'll try a soft-reset see if that fixes it.
In the mean time, attached is an HD skin I just knocked together.

There's also a Touch HD skin on the MyMobileR forum if you search for mymobiler touch hd skin in Google.

mallman said:
i agree there, skin mode doesnt work for me, otherwise it works perfect on my machine
Click to expand...
Click to collapse
If you want a working skin mode, you can use EveryWAN Remote Support
from Sparus Software.
I am one of the developers and we made it free for all.

WOW! that is genius! MyMobile was flaky at best for me, and was of limited use. Just installed EveryWAN (about 30 mins ago) and haven't stopped playing since! Great tools - esp. the macros. Many thanks for providing this to the community.

The second time I went to use it, my Touch Pro started to "click", and on my PC, I got the error message...
"An unhandled win32 exception occurred in MyMobiler.exe [2772]".

Tirinoarim said:
Hmm, strange. I see the pointer on my phone occasionally but its very "flickery", I'll try a soft-reset see if that fixes it.
In the mean time, attached is an HD skin I just knocked together.
Click to expand...
Click to collapse
Works beautifully, great work

How it works
Hi
1. Get mymobiler up and running.
2. Set (e.g.) mouse cursor to right
3. Close mymobiler BY USING THE "X" BUTTON
4. Move cursor off right hand side of computer screen.
Voila

I could'nt get the latest version of MyMobiler working on my Topaz - installed "EveryWAN Remote Support Personal Edition" - its a breeze - everythings working fine.

Related

Mouse Mode

I have to say, I never use mouse mode - iI find it awkward, and its easier to use the stylus etc, or just clunk with fingers inthe car...
But occasionally, mouse mode turns itself on! Not sure why. It did it in WM5, and I've triued all flavours of WM6 (currently usinfg BlackBlue 3.0)...
does anyone know how to completely disable/remove mouse mode? I wondered if there was a dll file that could be deleted/renamed or something?
Try renaming the mousemode.exe in the windows directory.
Just want to know if there is any Cab for
Mouse Mode in WM6
i saw a video - HERE
I think mousemode works if device has appropriate hardware.
Artemis blu trackball is the best i tryed, much more functionally then Samsung stick in linked video.
bigix1 said:
I think mousemode works if device has appropriate hardware.
Artemis blu trackball is the best i tryed, much more functionally then Samsung stick in linked video.
Click to expand...
Click to collapse
Thank You for replying

Check This cool tool

Hey All,
Don't know of this allready is post somewhere but check this appliction http://www.mymobiler.com/
Bye!
anyone tried it ? it seems rather suspicious but that's just me
yep i hav tried it, its funny
a lot of people use this tool, because it's awesome!
just try it
If you like MyMobiler (which is fairly standard) you'll love this.
http://www.sparus-software.com/Devi...pport,43/THE-ULTIMATE-TOOL-FOR-HOTLINERS.html
Full interface and free to
is it possible to configure it via bluetooth rather than usb cable ?
Gilgamesh1066 said:
If you like MyMobiler (which is fairly standard) you'll love this.
http://www.sparus-software.com/Devi...pport,43/THE-ULTIMATE-TOOL-FOR-HOTLINERS.html
Full interface and free to
Click to expand...
Click to collapse
This is also great
I only use it via USB whilst in cradle.....
Don't think BT is possible
mymobiler even works under linux with wine. i can connect to the device via wlan or activesync/usb connection. nice tool!
Gilgamesh1066 said:
If you like MyMobiler (which is fairly standard) you'll love this.
http://www.sparus-software.com/Devi...pport,43/THE-ULTIMATE-TOOL-FOR-HOTLINERS.html
Full interface and free to
Click to expand...
Click to collapse
phwoaaarrrr!!!! just what i need (enterprise version)
One of my favorite tools, at work at least so i dont keep my phone in hand to play around.
Ive been using My Mobiler for a few years now, its a great app that allows you to control ya phone when its charging in my work desk draw, it does screen shots and supports landscape mode as well ..
I have been using MyMobiler for a while now, and it's very good! No problems whatsoever, and supports skins, so you can actually have a "real" Touch HD show up on your computer screen.
I use it mostly on work to SMS and navigate the phone.
You can use your PC mouse and keyboard for controlling your phone when this is connected, so it makes typing much faster!
Only small issue is that the skins don't work in Landscape mode very well. But it's a minor problem. Apart from that, everything works as advertised.
I have also been checking out EveryWAN, and while it seems like a powerfull software, I don't like the fact it's so big screen-wise. My mobiler is a small window I can put in the corner of my screen and it will not take up much space.
Rozenthal said:
I don't like the fact it's so big screen-wise.
Click to expand...
Click to collapse
One of the appeals for EveryWan to me is the fact that it is a full screen application ......feels more like a complete application solution rather than just a small window. I also like the full tool kit including reg edit, install and task manager. The video creator is good too.
I try this app befor a long time and she work cool

[PATCH] WVGA - FIX for Navigon Mobile Navigator MN7 v 7.3.2 (Workaround)

Hi,
it seems like Navigon tried to implement WVGA resulution in their latest version of Mobile Navigator MN 7 v7.3.2 ... however, unsuccessful :-(
To make it work, unzip the attached "BinaryConfig.XML" and replace it on the device in the "\navigon\" directory... other files don't need to be replaced any more.
This fix applies only to v7.3.2!
regards jan
EDIT: I've replaced the first file by 3 others... the first is identical to the original posted here earlier, the others "stretch" mn7 to a mixture between vga and wvga, and to fullscreen wvga. Backgound (in German language can be found here)
to sum that up:
-people who like the version without stretching take the first file,
-people who like higher use of the screen and still want the full functionality (in landscape mode) take the 2nd file,
-people who like full-screen with restrictions to functionality (in landscape mode some software-internal scroll arrows can not be accessed) take the third file
regards jan
Indeed. The 7.3.2 did not launch and I had to soft reset my Touch HD.
Thanks for your files !
Do you know what are the changes brought by 7.3.2, otherwise than the WVGA resolution failed attempt ?
Does not work good.
But good Try.
Cool
Working perfect for me
Thanks a lot
where find 7.3.2 ?
thank you
taz22 said:
where find 7.3.2 ?
thank you
Click to expand...
Click to collapse
All updates (maps, software, ...) are done via Navigon Fresh.
thank you
very much
i m stupid
dodo34 said:
Does not work good.
But good Try.
Click to expand...
Click to collapse
what exactly do you mean?
Probably he means that - at least for 480x800 - not better than what was given at
http://forum.xda-developers.com/showthread.php?t=446487&page=15 post # 148
but anyway thanks for other resolutions.
Hallo,
how did you get the Touch HD running on 7.3.2?
I also run this config, but my Touch HD don`t recognize the internal GPS. What will I have to do that the MobileNavigator will find GPS???
Hello!
I´ve got the problem, when i want to start the MN7.3.2 in landscape mode, the mn7 goes for approx. 5seconds to horizontal mode, but starts in landscape. Then it rotates to landscape, but the mn7 is cut to the left half.
Has anybody an idea?
I use MaryOne ROM from HelloNasty, so it rotates for itself.
raz0r09 said:
Hallo,
how did you get the Touch HD running on 7.3.2?
I also run this config, but my Touch HD don`t recognize the internal GPS. What will I have to do that the MobileNavigator will find GPS???
Click to expand...
Click to collapse
if you haven't changed any gps settings on the hd itself and if you don't use any port splitter like serilot or glopus, it should work with the following manual gps settings in navigon setup:
GPS Type: Internal GPS only
GPS-Port: Com4: ActiveDevice
GPS Baudrate: 4800
TMC: None
at least that works for me...
good luck
regards jan
NoRescue said:
Hello!
I´ve got the problem, when i want to start the MN7.3.2 in landscape mode, the mn7 goes for approx. 5seconds to horizontal mode, but starts in landscape. Then it rotates to landscape, but the mn7 is cut to the left half.
Has anybody an idea?
I use MaryOne ROM from HelloNasty, so it rotates for itself.
Click to expand...
Click to collapse
You have to make sure that the screen is in landscape mode (which means not only hold the device in landscape, but have an open window (i.e. file explorer) which actually is displayed in landscape) BEFORE you start MN7, and it should stay like that all the time. MN7 gets "confused" when you change screen orientation during operation. maybe you should exclude it from your g-sensor app.
hope that helps...
regards jan
Update to MN7.3.2
I Have problems updating to 7.3.2.
Have copied the Software (7.3.1) to the HD in HDD-Mode and installed everything. Then Installed NavigonFresh on my PC and plugd in my HD in HDD-Mode. When I hit Update Navigon-Sofware I get the massage: "Ungültige Gerätedefinition" (=>Invalid Devicedefinition)
What am I doing wrong? Created an Account and everything. Do I Have to buy MN to Update?
MN7
What did I do wrong - Icopied the binaryconfig file as you said but when I launch MN7 still no display. Can you help?
HD switching off
Hi all,
Since I have installed navigon MN7, my HD does not switch off automatically anymore.. That's very bad for the battery. Any idea how to solve this problem?
Thanks !
See http://forum.xda-developers.com/showthread.php?t=446487&page=43 (hope this becomes a link), post #423. The hard reset may not be necessary; I did it because I wanted to clean the device of any unexpected effects which I was afraid would have been created by MN7 using the "wrong" xmls. Sorry I tried both on my PC (the installation program) and on my HTC HD (my trail version) but coud not find a menu option saying which version of MN7 I have!
Thank you hausen, it works perfectly on my Diamond2!
Hi all,
today i've bought a Navigon Mobile 7 for my HTC HD2, installed, updated via Freshstuff and till this morning my NM7 wouldnt start at all...i modified it with the files provided here (.xml) tried with soft and hard reset, uninstalled Copilot Live 8 (thought was a kind of conflict). The manual say:
- use 2 gb sd micro card to install the software..i've used 4 gb and 8gb...maybe is mandatory???
the program start and remain freezed fro few second (without any welcome screen, just the pda freezed...) then i checked in the task manager and i saw was in run using 2.49 mb of resources and i had to stop it few time...
now...any solution about? or i have to be again a bad guy and stop to buy software but just have to keep download cracked software?
Thank you all for the answers,
S. aka Dr. Dobermann...ANGRY...really ANGRY!
thanks
hausen said:
Hi,
it seems like Navigon tried to implement WVGA resulution in their latest version of Mobile Navigator MN 7 v7.3.2 ... however, unsuccessful :-(
To make it work, unzip the attached "BinaryConfig.XML" and replace it on the device in the "\navigon\" directory... other files don't need to be replaced any more.
This fix applies only to v7.3.2!
regards jan
EDIT: I've replaced the first file by 3 others... the first is identical to the original posted here earlier, the others "stretch" mn7 to a mixture between vga and wvga, and to fullscreen wvga. Backgound (in German language can be found here)
to sum that up:
-people who like the version without stretching take the first file,
-people who like higher use of the screen and still want the full functionality (in landscape mode) take the 2nd file,
-people who like full-screen with restrictions to functionality (in landscape mode some software-internal scroll arrows can not be accessed) take the third file
regards jan
Click to expand...
Click to collapse
might actually work

Age of empires - how to move the camera?

Hey, ive done a bit of searching but got no finds only people asking how to move the camera as well. One find did point out that the game doesn't worth with Gsen, or at least not out of the box.
I have a Gsen program for making it act like a dpad but that did not allow me to move the camera either.
Any other ideas? Anyone got it working at all?
try moving the white box in the overall view...
i think there are some arrow keys which you use to move the camera (if i can remember correctly).
Draggin around the white box doesn't work and there are no arrows either :/
any other ideas?
sorry for the late reply my pc was screwed up.
Touch the border of the screen ? or use gpad to emulate dpad, that's what i do for the game call the Quest and it works well. hope it helps.
N'da said:
Touch the border of the screen ? or use gpad to emulate dpad, that's what i do for the game call the Quest and it works well. hope it helps.
Click to expand...
Click to collapse
Neither work
Gpad config for AOE
Try this config option for gpad:
FOR AGE OF EMPIRES
<ExeName>aoeppc.exe</ExeName>
<CenterY>0</CenterY>
<DeadZoneY>10</DeadZoneY>
<DeadZoneX>10</DeadZoneX>
<MaxY>40</MaxY>
<MaxX>40</MaxX>
<KeyMethod>SendMessage</KeyMethod>
<MaxKeyTick>1</MaxKeyTick>
<MinKeyTick>10</MinKeyTick>
</Application>
erm, how do i do this? Im unsure how to file. I have the config file on my phone which opens in IE and i have a note pad one. Im presuming changing the note pad one wont do anythin?
:EDIT:
I edited the XML file to add in what you said but now the program doesn't load insteaD :/
I tryed adding "<application> before the text you wrote but taht didn't work either.
:EDIT:
Ahaha! got it working, didn't relise i had to capitalize the A lol. Alas it doesn't work with teh game and appears that when running gpad with the game makes the calibration of the touch go totaly off.
:EDIT:
restarted phone and it worked. Cheers mate¬!
AOE in Gpad
Yaaaaaay

HID Bluetooth Mouse

Hey Folks,
I'm using the Desire HD with the Cyanogen Mod 7 (latest Version from 2 Days ago).
Now I connected via Menu (Wireless & Networks --> Bluetooth) a simple "noname" Bluetooth Mouse and the pairing did happen. I used "0000" as Pairing-Code and the Desire gives me the Message "Connected with HID-Device" (or something like that, I use the german language).
Now I should see a Mousearrow or something should happen if I scroll or press a Button.
But nothing happens.
The Mouse itselft works properly - I tried it in Windows7 and Suse-Linux.
I also tried the App BlueInput (latest and some previous versions) but there its the same. I get connected properly but it wont work.
Now I'm hopefully waiting for your ideas (and I hope there are some)
Thanks in advance!
Ok, correct me if I'm wrong, you want to use a mouse to control your handset? Where the handset is directly in front of you?
I dont know if Android supports this. If you wish to remotely control your handset try WebKey from the market.
andyharney said:
Ok, correct me if I'm wrong, you want to use a mouse to control your handset? Where the handset is directly in front of you?
Click to expand...
Click to collapse
Well, there is also a possibility to make use of a WiiMote...
I see this more as a proof of concept.
What about the Motorola Atrix within its "to-Netbook-conversation-Docking"?
Internal Keyboard + BT Mouse = playable Quake3 on Android
Err bubble to bursting station, you can use a wiimote on a DHD quite easily. You can even do it with Apps available from the market place, hey you can even use the classic controller and nunchuck with it.
I have used it (not entirely successfully) to play N64 games on an emulator
At first : Thanks for your responses!
Ok, correct me if I'm wrong, you want to use a mouse to control your handset? Where the handset is directly in front of you?
Click to expand...
Click to collapse
Yes, I want to control my Desire HD with a mouse when I stand next to it. If I wouldn't, I wouldn't have asked for it
The thing is that I need a Mousewheel - or at least something that can emulate one.
Correct me if I'm wrong but the WiiControl doesn't have such a feature.
What I found out is, that the Cyanogen 7 doesn't support Mouseweel-Actions.
I installed the latest 6.1 - et voilla - I get a Cursor and the Mousewheel works.
But unfortunately it doesn't work if I use it in a Flashmovie with the WebKit-Browser.
It seems that the Events are not tunneled into the Flashapp.
Someone got an idea for a workaround?
Ps: I like the idea of playing Quake3 on my Desire - but I prefer Quake1
Is there a way of using the mousewheel in a self-written application!?
That could also solve my problem
I mean, in the Cyanomod I can scroll around through lists an so on. There must be a way! (hopefully)
ludw10 said:
I installed the latest 6.1 - et voilla - I get a Cursor and the Mousewheel works.
Click to expand...
Click to collapse
What exactly did You install? I play Quake 3 with a friend of mine in my university and I would sooo own him with a BT mouse!!!

Categories

Resources