Related
As the title says, did you remove the protective film on the keyboard?
There's three of them. One left, one right and one on top.
There's also a fourth big one on the back of the screen (visible when tilted).
Some people say it's meant to be there and you shouldn't remove them.
Others say it's just there to protect during transportation and that they should be removed.
I have no idea, but removed them because one came a bit loose.
Does anyone know what HTC has to say about them?
PIR3lly said:
I have no idea, but removed them because one came a bit loose.
Does anyone know what HTC has to say about them?
Click to expand...
Click to collapse
Same as me , but I removed only the left & right ... the rest is still tight
Same here, left and right came loose so they're off. Have noticed the left side slider is leaving a mark that can be rubbed off, I imagine it will cause a scratch eventually.
Possibly replacing with a custom cut out invisi shield would help but would need to take the phone apart to apply it correctly... would need to be done under warranty.
had my TP2 for a month now and the protective firm is still on there, i also left the one behind the screen and added the screen protected that came with the phone. The reason why i didnt took it off is that i saw it was leaving marks so i was afraid it will leave scratched and prolly soon i will sell it so i dont want it to be scratched up.
leaving mine intact even though the one to the right of keyboard is coming lose.
One on the right is a bit loose but shall keep it on until it falls half way off. I wonder if you can get replacements. He he he...
eWay said:
Same as me , but I removed only the left & right ... the rest is still tight
Click to expand...
Click to collapse
LOL.. I even didn't noticed it at all! So I just removed it.. and like e-Way mentioned; I removed only the left & right, the rest is a bit hard to get rid off!
My left one has crumpled up and is coming off now, I imagine it will scratch quite badly given time as the plastic is already hammered and its not yet a week old.
Messa
My right one rumbled up when closing the keyboard, scaring the hell out of me!
So I removed the left one myself.
Never noticed the one above the keyboard, and on the back, until I read about it here
I took all mine off, because I could see they were gonna fall off in time anyway, and tbh, I thought they made my glossy device look a bit tatty. I have no nasty looking wear marks after a month of heavy use.
none of them came loose but i can see scratch marks on the side. im gonna leef them on as long as possible.
Mine are getting loosened by sliding it in to the Brodit Tytn II holder (which it fits perfectly!). So I may need to trim the ones either side of the keyboard back a bit.
mine was loose also so stripped it off. And didnt want to seem too precious about my phone... it is just a phone anyway... (The me a year ago wouldnt say this but after giving birth, my perspective has changed... but still love my phone though, not just with the same passion before )
My TP2 is send to HTC for repairs, one of the problems i mentioned were the loose protective films (the other problems had to do with battery-charging problems, bad responsive keys on the keyboard, loose on/off-button and TouchFlo3D startup problems).
According to (at least two) HTC-helpdesk employees these three films should not be removed and could be repaired (more like replaced) under guarantee.
Many people on a dutch forum tell me i'm crazy that i've put this problem on my list to HTC, but if they wanna repair it, and i don't get scratches on my device that way... who's crazy then
Came loose, and removed them.. i only saw scratch marks on the protective film, still no marks without them..
D3StRoY said:
Came loose, and removed them.. i only saw scratch marks on the protective film, still no marks without them..
Click to expand...
Click to collapse
Yeah, that's exactly what I had.
Marks with the film, but none without them.
Still, just to make sure, I cut up some clear tape and applied that to the left and right side. It's thinner, but I can already see some marks on it... strange.
cuteangelika said:
mine was loose also so stripped it off. And didnt want to seem too precious about my phone... it is just a phone anyway... (The me a year ago wouldnt say this but after giving birth, my perspective has changed... but still love my phone though, not just with the same passion before )
Click to expand...
Click to collapse
Yes but I bet your phone doesnt wake you up 3 times a night and demand feeding !
The sticker on the left of the keyboard came loose last week. I peeled it away. There's no significant 'damage' to the paint as of yet - don't really expect there will be any.
I'm not sure if we're supposed to peel them off or to let them be. The device looks better without those ugly reflecting stickers. But I'm tempted to let them be until they form a problem (e.g. peel off).
I would no way return my device for a stupid protective sticker coming off though. It's not that big a deal - to me.
On day one I removed the right and the left film on the keyboard.
Still no marks without the film.
I have mine now for almost a month.
So how about the one on the back of the tilting screen. What did you guys do with that?
Does it come with a screen protector????????? If it doesn't then I should of ordered one in advance!
Let me know.
Came with only one screen protector behind the manual and the CD
Good! Do you think it's reusable? I don't want to put it on and then find out I have a faulty device after a few days.
The Tmo Rep put mine on for me. He must be new, though. He had no clue the TP2 came out today, i had to tell him. alskdjf. and when he tried to put the screen protector on, he looked like if he was trying to do NeuroSurgery or something. so now i have a big air bubble running down the entire left side of the device. and on top of that, when he tried to take the battery cover off, he tried to PRY it off the device. WTF?! it really is not that hard AT ALL to take the cover off. Right? i was a little stunned when he tried to do that. But everythings fine.
Yeah usually when I get a device from the store they try to do everything for you. I would have to say no it's ok I got it. Then they would just put it in the bag and I would leave.
i got my tp2 today, and it came with factory plastic screen protector, took me half an hour to realize why i couldnt hear volume on calls.. realized the one that comes with the phone has the top speaker completely SEALED/blocked off... then theres an extra screen protector that came with the phone in the box, that one has preholes for buttons + speaker.. it took a quick 2minutes of finesse to put it down without any air bubbles, i found this quite easy after realizing they had good stick, just do it slowly
where can i get extra protectors? didnt put mine on very straight.
where are you guy's getting the TMo TP2? Doesn't show on their website yet
Showed up for me on Tmo sites last night: I went to a Tmo store to get one cause I didn't want to wait for shipping. Walmart.com also carries the full line of TMo phones.
As for screen protectors, I like Invisi-shield from Zagg. They protect very well and add a non-slip surface. I just hate the idea of dropping my $800 (HD) phone.
You can call T-Mobile to order your TP2. For the screen protector, I like "bestskinsever". I use them for every device I had.
I ordered mine from Brando, Honkong. I use have their SP on my HD. It was the BEST ones I have seen thus far. But I am not sure if the one I ordered will fit the TP2, as on the Engadget review, I saw fromt he Pics that the Europe TP2 size is a bit differnt to the Tmo USA ones. I should be getting it in a day or 2. I will update once I have it.
it comes whit a screen protector , just look for it in the box where the manual is. (TMO TP2)
Day 31.....the bottom will peel!
Buy a screen protector....the complimentary one is better than nothing at all.
Patiently waiting for "Write Shields" to come out with one. Excellent quality, been using since Kaiser.
I ordered a Zagg for mine - the one in the box is serviceable, but IMHO not what you want. I've been an "Invisible Shield" fan for a long time.
josh_prayyforplagues said:
The Tmo Rep put mine on for me. He must be new, though. He had no clue the TP2 came out today, i had to tell him. alskdjf. and when he tried to put the screen protector on, he looked like if he was trying to do NeuroSurgery or something. so now i have a big air bubble running down the entire left side of the device. and on top of that, when he tried to take the battery cover off, he tried to PRY it off the device. WTF?! it really is not that hard AT ALL to take the cover off. Right? i was a little stunned when he tried to do that. But everythings fine.
Click to expand...
Click to collapse
Try your stylus, it's probably jammed in there now. You can't remove the case without removing the stylus first! Otherwise something gets bent inside. I bet the T-Mo Rep didn't know that, and now you gotta return the phone for a new one.
But, LOL, that's why my phone volume was so quiet!! I still have the factory screen protector on it, which covers the speaker, as someone said! LOL.
dwny said:
Day 31.....the bottom will peel!
Buy a screen protector....the complimentary one is better than nothing at all.
Patiently waiting for "Write Shields" to come out with one. Excellent quality, been using since Kaiser.
Click to expand...
Click to collapse
Agree! The one it comes with is a piece of crap!
I got 2 screen protectors with mine from tmo. First is on there and still going strong way into 3 months. Works a treat. Thats not to say others are better but ive not had and issues so far...touch wood
ace10134 said:
Try your stylus, it's probably jammed in there now. You can't remove the case without removing the stylus first! Otherwise something gets bent inside. I bet the T-Mo Rep didn't know that, and now you gotta return the phone for a new one.
But, LOL, that's why my phone volume was so quiet!! I still have the factory screen protector on it, which covers the speaker, as someone said! LOL.
Click to expand...
Click to collapse
I disagree (At least w/the USA version)...read the following thread again (before your post): http://forum.xda-developers.com/showthread.php?t=547538
The cover tabs are not even in the same plane as the stylus...Although I will agree that the T-Mo Rep may have broken a tab while cranking the cover off, causing it to fall in the adjacent stylus slot...
glhs509 said:
I disagree (At least w/the USA version)...read the following thread again (before your post): http://forum.xda-developers.com/showthread.php?t=547538
The cover tabs are not even in the same plane as the stylus...Although I will agree that the T-Mo Rep may have broken a tab while cranking the cover off, causing it to fall in the adjacent stylus slot...
Click to expand...
Click to collapse
Yea, I read that. That's what hinted me off that the stylus was damaged. And obviously it did get damaged due to the back case, because it's barely removable.
ace10134 said:
Yea, I read that. That's what hinted me off that the stylus was damaged. And obviously it did get damaged due to the back case, because it's barely removable.
Click to expand...
Click to collapse
Just a quick check, but does your back cover still have two tabs on each side, and one towards the bottom (middle)? Not sure if it's you or josh_prayyforplagues that was having the stylus problem tho...
The title says it all. Is yours flush with the back of the case when it's folded in?
Mine protrudes ever so slightly. Its just barely noticeable enough to be a pain in the ass, but its less than a millimeter. I know my Evo had already been returned when I bought it, so it could just be my unit, but I don't know.
So anyways, weigh in in the poll!
What makes it a pain? Mine is barely too, but haven't really noticed until you made me look lol
Bowhuntr11 said:
What makes it a pain? Mine is barely too, but haven't really noticed until you made me look lol
Click to expand...
Click to collapse
Haha its not really an issue I guess, I'm just mega OCD, so when I run my hand over the back of the phone and feel that, it makes me wanna break things
All kidding aside, it doesn't effect anything I guess, but if it was just me I was gonna try and get a swap for another one. If it's on all of them, it doesn't matter, I just was wondering about it.
Mine also sticks out a bit, but I don't find it annoying. What I find annoying is the fact that it squeaks when I pop it out.
About a mm or so
I think they all do. Mine does.
Sent from my Evo
My wife's and mine are flush.
mine is flush. although i do not use it often, and when i do, it is for short periods of time. it could just be the weight of the device putting strain on and stretching out the kickstand and its spring or whatever mechanism makes it retract and come out. i also use some form of case armor as a cover that is on it all the time, and there is a little bit of space cut out for the kickstand, so if it was to protrude in the future, it would still be flush with the case, if not still a little embedded inside it
warmachine00 said:
mine is flush. although i do not use it often, and when i do, it is for short periods of time. it could just be the weight of the device putting strain on and stretching out the kickstand and its spring or whatever mechanism makes it retract and come out. i also use some form of case armor as a cover that is on it all the time, and there is a little bit of space cut out for the kickstand, so if it was to protrude in the future, it would still be flush with the case, if not still a little embedded inside it
Click to expand...
Click to collapse
Nah its not been pushed out it was like this since I bought it. Like I said its not a big issue, but the lack of consistency with these devices is kinda scaring me. I am a big HTC fan, but wow.
Damn. This looks like another difference between the build versions. I may have to do a swap
This is no where serious enough to do a swap unless you were already going to swap for another reason. If it still functions as it's supposed to and isn't wobbly, why send the whole thing back?
Mine protrudes probably a half a mm out (just barely noticeable until you said something) but it definitely doesn't detract from the device at all. Works perfectly. No where near as distracting as light leakage.
sfox8 said:
This is no where serious enough to do a swap unless you were already going to swap for another reason. If it still functions as it's supposed to and isn't wobbly, why send the whole thing back?
Mine protrudes probably a half a mm out (just barely noticeable until you said something) but it definitely doesn't detract from the device at all. Works perfectly. No where near as distracting as light leakage.
Click to expand...
Click to collapse
No it doesn't interfere with the use, and it really isn't that serious. But, if not all of the units have this issue, and I'm going to be stuck with it for two years, then I would prefer to do a swap for a device without it.
Don't get me wrong, I'm not being a whiny ***** about it, it all of them were like that I wouldn't care. But since there are units without it, and I'm paying to own the phone, I would rather get one that won't bother me each time I pick it up.
P.S: on the light leakage. I KNOW RIGHT! My iPhone 3G got swapped 3 times for a light leak, it's a huge issue in darker areas. Can't believe that slipped through, but I can live with it if I have to, since it seems like every unit has it.
theres a kickstand?
kidding ... mine sits completely flush. if you get a case it would eliminate that problem.
Perhaps it is not suppose to be flush and those with flush kickstands have defective units.
Mine is flush...
.....damn double-post.
Geniusdog254 said:
...Don't get me wrong, I'm not being a whiny ***** about it...
Click to expand...
Click to collapse
Really? Could've fooled me.
Which brings me to another point, does everyone's earpiece speaker grill have holes that are only halfway showing, or is it just me? It's really irritating, not that I'm complaining about it, but I may try to swap if mine's the only one.... <---Sarcasm if you missed it.
Jye75 said:
Really? Could've fooled me.
Click to expand...
Click to collapse
Dude chill. The point of this thread was to see if everyone had this issue or just me, since I knew my phone was a return when I bought it. Why even read through all the posts to find that if you were just gunna be a troll?
Mine protrudes slightly. Not a big deal IMO. But interesting to see some are flush.
Geniusdog254 said:
Dude chill. The point of this thread was to see if everyone had this issue or just me, since I knew my phone was a return when I bought it. Why even read through all the posts to find that if you were just gunna be a troll?
Click to expand...
Click to collapse
Nothing to chill about... get real. I posted a sarcastic comment, doesn't make me a troll.
Okay here's the deal.. I currently have an HTC Desire, and I recently tried the SGSII.. My desire is a FREAKING TANK! I cant hurt it no matter what I do, including sending it flying across the room more times then I care to admit.. the glass has one tiny light scratch from when it spent a day in my pocket with my keys.. The SGSII on the other hand, I dropped it (rather gently) from my pocket the day I got it, and the case got a huge ugly gouge!
We've all seen the video of the guy taking his keys to the glass, which is what you should be able to do with any smartphone, but how does the actual case housing stand up? anyone got any stories of terrible incidents it survived unblemished?
I am hard on my phones.. I dont deny it, so I want something that will handle a beating and I'm kinda skeptical of Samsung after my experience with the SGSII.
P.S. my alternate is the Amaze
I too had a Desire and I have to say I am very pleased with the build quality of the GN. I can't say I've thrown my brand new phone across the room or even dropped it yet (I'm not the most accident prone) but it seems to be a sturdy piece of kit!
http://www.youtube.com/watch?v=bc5JjPU4Xh0
mikeandjaimie said:
We've all seen the video of the guy taking his keys to the glass, which is what you should be able to do with any smartphone, but how does the actual case housing stand up? anyone got any stories of terrible incidents it survived unblemished?
I am hard on my phones.. I dont deny it, so I want something that will handle a beating and I'm kinda skeptical of Samsung after my experience with the SGSII.
Click to expand...
Click to collapse
If you were unimpressed by the build quality/durability of the SGSII casing, not much is going to change with your feelings on the GN. Its built pretty much out of the same materials. You're best off sticking with an extra case if you get it.
mohitrocks said:
http://www.youtube.com/watch?v=bc5JjPU4Xh0
Click to expand...
Click to collapse
Dropping it on carpet just proves that the screen/internals won't break from a hard fall. I think what OP is referring to in the case of his old SGSII is big gouges or scratches in the casing, which the GN will probably suffer from the same way.
I ordered this for good measure..lol
http://www.ebay.com/itm/26090122267...X:IT&_trksid=p3984.m1497.l2649#ht_3353wt_1072
Yes I was referring to actually dropping it.. Every other week my desire gets knocked off the living room table, or the like. I don't actively throw it or go out of my way to be rough, but we have an active house, And things happen. I guess I'll have to look into a very slim case, as I usually just toss it in my Jeans front pocket And go.
Sent from my HTC Desire using xda premium
AfroCreame said:
I ordered this for good measure..lol
http://www.ebay.com/itm/26090122267...X:IT&_trksid=p3984.m1497.l2649#ht_3353wt_1072
Click to expand...
Click to collapse
Good to know.. but with my luck, having an extra case on hand in case of a disaster would jinx me. Then if I dropped it the screen would probably shatter...lol
Well there was that thread where a guy cracked his screen.
The bit that worried me was when a second guy posted his cracked too. He put it in his pocket as normal, got to work and the screen was cracked :/
kam187 said:
The bit that worried me was when a second guy posted his cracked too. He put it in his pocket as normal, got to work and the screen was cracked :/
Click to expand...
Click to collapse
Sounds like BS to me. There had to be something in his pocket putting a lot of pressure on the glass. And he must wear some skin tight jeans for that to happen... or something bashed his phone.
I always put my phones in my jeans pocket. OG Droid, and Nexus S. Always keep that pocket empty but my phone.
I read about screem gap but i was unsure what exactly was meant. I just took a closer look and found out that there is a tiny gap between my screen and phone on top in which dirt fills in and it pisses me off. I havent dropped my screen once and if i push the top left part of my phone i can hear a sort of "click".does that make my phone faulty? Im really annoyed vy the dirt that fills in... Apart from rhat phone has no problems.
shadehh said:
I read about screem gap but i was unsure what exactly was meant. I just took a closer look and found out that there is a tiny gap between my screen and phone on top in which dirt fills in and it pisses me off. I havent dropped my screen once and if i push the top left part of my phone i can hear a sort of "click".does that make my phone faulty? Im really annoyed vy the dirt that fills in... Apart from rhat phone has no problems.
Click to expand...
Click to collapse
send it back. that is what i am doing. left hand side of the phone between the screen and the plastic you can see dust getting inside there to. plus if you press the left hand side tad hard you can hear it creaking as well. i called HTC to see if they could replace it for me straight away without sending it for repairs..waiting for an outcome tomorrow...if they say no i will just send it for repairs and hope they find the problem and either fix it or replace it then...i know it will drag for a week but at least that way you know one way or the other it will get fixed...
i was going to say if it does not bug you then leave it..but you sound just like me that even though the phone works fine it will bug you cause you know it is there
should i go to my provider or directly cpntact htc? And just to understand it better. Gaps are not supposed to be there, am i right?
shadehh said:
should i go to my provider or directly cpntact htc? And just to understand it better. Gaps are not supposed to be there, am i right?
Click to expand...
Click to collapse
Dont replace it as you have no other problems. Go to HTC repair center and just fix it. If you replace there may be a chance of getting more faultier one.
Sent from my HTC One X using Tapatalk 2
Living in austria, where to check for such a repair center?
forumhookersdotcom said:
Dont replace it as you have no other problems. Go to HTC repair center and just fix it. If you replace there may be a chance of getting more faultier one.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
have to agree with that as well. but at the same time new batch of phones get send out so you never know. just go to HTC site and do a locator for your country my friend
shadehh said:
Living in austria, where to check for such a repair center?
Click to expand...
Click to collapse
Have a look at this . May be useful
http://www.htc-floorsystems.com/en/HTCGlobal/HTCOffices/HTCGermany/Contacts.aspx
Sent from my HTC One X using Tapatalk 2
Thank you all and especially goku80 for fast replies. Gotta love xda community
shadehh said:
Thank you all and especially goku80 for fast replies. Gotta love xda community
Click to expand...
Click to collapse
no problem my friend. i feel your pain and know what you are going through. i will keep you updated with my one and what happens..keep me updated with yours as well
It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.
Eddzz!! said:
It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.
Click to expand...
Click to collapse
oh really..seriously i wonder if you had a gap how would you feel about your perfect phone? everyone to their opinion. i can live with it no problem..but the fact knowing that it is there will bug the **** out of me hence why i am going through what i am right now
I had a creaky SGS for 2 years. I still have it now and it works and looks as good as it did on day one.
Eddzz!! said:
I had a creaky SGS for 2 years. I still have it now and it works and looks as good as it did on day one.
Click to expand...
Click to collapse
well i will see what they say tomorrow..if they replace it for me all is good..but if they do not and want to fix it ehh i kinda have to think twice being without my phone for a week
Ive heard that the one x was made in 2 different countrys taiwan and china... china being the worst built ones buttt I must have a really faulty dhd. I've had it for 10 months now and my screen moves, doesn't fit right on the phone as there should be a lip round it but isn't my speaker isn't straight so is sloping. Looks like the cnc machine hasn't cut it right. Power button is really recessed too far in..... I think a little sqweek is nothing to really worry about if the screen falls out then ya I'd send it back.
Sent from my Desire HD using XDA
htcmodteam said:
Ive heard that the one x was made in 2 different countrys taiwan and china... china being the worst built ones buttt I must have a really faulty dhd. I've had it for 10 months now and my screen moves, doesn't fit right on the phone as there should be a lip round it but isn't my speaker isn't straight so is sloping. Looks like the cnc machine hasn't cut it right. Power button is really recessed too far in..... I think a little sqweek is nothing to really worry about if the screen falls out then ya I'd send it back.
Sent from my Desire HD using XDA
Click to expand...
Click to collapse
well that is what worries me about the whole damn thing..if it gets to hot to soon and in two months down the line the screen actually does fall out
TBH ive just checked mine and it does have a slight gap with lint building up already (bare in mind ive had this phone 2 days) Also have the yellow blotch on the screen AND a dead pixel. This is by far the best phone ive ever owned...But my word these little niggles are grating on my moobs! Ive never had to send a phone off to a repair centre before but im not really willing to put up with the problems the phone has (however ridiculously small they seem to some ) You expect some software issues in an early batch, but dead pixels, discoloured screens, gaps occuring out of nowhere between the screen, its a bit much really! Im gunna have to get it sent off soon i think, gutted!
how do you clean the dust build up?
abuds87 said:
how do you clean the dust build up?
Click to expand...
Click to collapse
Use a screwdriver.
P.S. http://forum.xda-developers.com/showthread.php?p=27066789
abuds87 said:
how do you clean the dust build up?
Click to expand...
Click to collapse
Vacuum cleaner with a soft piece of cloth on the vacuum tube to avoid scratches.
Just another option
To the OP: May I ask what serial your phone has?
Cheers.
Eddzz!! said:
It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.
Click to expand...
Click to collapse
Do you even realize how big 1mm is?!!!! Get a ruler and see please....
I doubt even a blind person could enjoy a phone with a gap big as that. You would not just see this, but also feel.
I have a gap that's about 0,1-2 mm big (measuring with paper, which is about that in average I think 0,1 till 0,3 I think but also not sure) and its around the whole screen on both sides of the ring.
Ugh...1mm...
But seriously guys, how big are the gaps it makes you return it?
I mean should I return it with 0,1 mm ? (maybe less) seen a bigger gap on SGS 2.