Screen gap - HTC One X

I read about screem gap but i was unsure what exactly was meant. I just took a closer look and found out that there is a tiny gap between my screen and phone on top in which dirt fills in and it pisses me off. I havent dropped my screen once and if i push the top left part of my phone i can hear a sort of "click".does that make my phone faulty? Im really annoyed vy the dirt that fills in... Apart from rhat phone has no problems.

shadehh said:
I read about screem gap but i was unsure what exactly was meant. I just took a closer look and found out that there is a tiny gap between my screen and phone on top in which dirt fills in and it pisses me off. I havent dropped my screen once and if i push the top left part of my phone i can hear a sort of "click".does that make my phone faulty? Im really annoyed vy the dirt that fills in... Apart from rhat phone has no problems.
Click to expand...
Click to collapse
send it back. that is what i am doing. left hand side of the phone between the screen and the plastic you can see dust getting inside there to. plus if you press the left hand side tad hard you can hear it creaking as well. i called HTC to see if they could replace it for me straight away without sending it for repairs..waiting for an outcome tomorrow...if they say no i will just send it for repairs and hope they find the problem and either fix it or replace it then...i know it will drag for a week but at least that way you know one way or the other it will get fixed...
i was going to say if it does not bug you then leave it..but you sound just like me that even though the phone works fine it will bug you cause you know it is there

should i go to my provider or directly cpntact htc? And just to understand it better. Gaps are not supposed to be there, am i right?

shadehh said:
should i go to my provider or directly cpntact htc? And just to understand it better. Gaps are not supposed to be there, am i right?
Click to expand...
Click to collapse
Dont replace it as you have no other problems. Go to HTC repair center and just fix it. If you replace there may be a chance of getting more faultier one.
Sent from my HTC One X using Tapatalk 2

Living in austria, where to check for such a repair center?

forumhookersdotcom said:
Dont replace it as you have no other problems. Go to HTC repair center and just fix it. If you replace there may be a chance of getting more faultier one.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
have to agree with that as well. but at the same time new batch of phones get send out so you never know. just go to HTC site and do a locator for your country my friend

shadehh said:
Living in austria, where to check for such a repair center?
Click to expand...
Click to collapse
Have a look at this . May be useful
http://www.htc-floorsystems.com/en/HTCGlobal/HTCOffices/HTCGermany/Contacts.aspx
Sent from my HTC One X using Tapatalk 2

Thank you all and especially goku80 for fast replies. Gotta love xda community

shadehh said:
Thank you all and especially goku80 for fast replies. Gotta love xda community
Click to expand...
Click to collapse
no problem my friend. i feel your pain and know what you are going through. i will keep you updated with my one and what happens..keep me updated with yours as well

It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.

Eddzz!! said:
It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.
Click to expand...
Click to collapse
oh really..seriously i wonder if you had a gap how would you feel about your perfect phone? everyone to their opinion. i can live with it no problem..but the fact knowing that it is there will bug the **** out of me hence why i am going through what i am right now

I had a creaky SGS for 2 years. I still have it now and it works and looks as good as it did on day one.

Eddzz!! said:
I had a creaky SGS for 2 years. I still have it now and it works and looks as good as it did on day one.
Click to expand...
Click to collapse
well i will see what they say tomorrow..if they replace it for me all is good..but if they do not and want to fix it ehh i kinda have to think twice being without my phone for a week

Ive heard that the one x was made in 2 different countrys taiwan and china... china being the worst built ones buttt I must have a really faulty dhd. I've had it for 10 months now and my screen moves, doesn't fit right on the phone as there should be a lip round it but isn't my speaker isn't straight so is sloping. Looks like the cnc machine hasn't cut it right. Power button is really recessed too far in..... I think a little sqweek is nothing to really worry about if the screen falls out then ya I'd send it back.
Sent from my Desire HD using XDA

htcmodteam said:
Ive heard that the one x was made in 2 different countrys taiwan and china... china being the worst built ones buttt I must have a really faulty dhd. I've had it for 10 months now and my screen moves, doesn't fit right on the phone as there should be a lip round it but isn't my speaker isn't straight so is sloping. Looks like the cnc machine hasn't cut it right. Power button is really recessed too far in..... I think a little sqweek is nothing to really worry about if the screen falls out then ya I'd send it back.
Sent from my Desire HD using XDA
Click to expand...
Click to collapse
well that is what worries me about the whole damn thing..if it gets to hot to soon and in two months down the line the screen actually does fall out

TBH ive just checked mine and it does have a slight gap with lint building up already (bare in mind ive had this phone 2 days) Also have the yellow blotch on the screen AND a dead pixel. This is by far the best phone ive ever owned...But my word these little niggles are grating on my moobs! Ive never had to send a phone off to a repair centre before but im not really willing to put up with the problems the phone has (however ridiculously small they seem to some ) You expect some software issues in an early batch, but dead pixels, discoloured screens, gaps occuring out of nowhere between the screen, its a bit much really! Im gunna have to get it sent off soon i think, gutted!

how do you clean the dust build up?

abuds87 said:
how do you clean the dust build up?
Click to expand...
Click to collapse
Use a screwdriver.
P.S. http://forum.xda-developers.com/showthread.php?p=27066789

abuds87 said:
how do you clean the dust build up?
Click to expand...
Click to collapse
Vacuum cleaner with a soft piece of cloth on the vacuum tube to avoid scratches.
Just another option
To the OP: May I ask what serial your phone has?
Cheers.

Eddzz!! said:
It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.
Click to expand...
Click to collapse
Do you even realize how big 1mm is?!!!! Get a ruler and see please....
I doubt even a blind person could enjoy a phone with a gap big as that. You would not just see this, but also feel.
I have a gap that's about 0,1-2 mm big (measuring with paper, which is about that in average I think 0,1 till 0,3 I think but also not sure) and its around the whole screen on both sides of the ring.
Ugh...1mm...
But seriously guys, how big are the gaps it makes you return it?
I mean should I return it with 0,1 mm ? (maybe less) seen a bigger gap on SGS 2.

Related

Screen glass coming off?

I recently realized that the glass on the screen is coming off slightly from the top left corner. I never drooped the phone it never got a hit no nothing.
Any one noticed something similar ?
Sent from my Galaxy Nexus
b1ck132 said:
I recently realized that the glass on the screen is coming off slightly from the top left corner. I never drooped the phone it never got a hit no nothing.
Any one noticed something similar ?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Can you get a picture?
Well I tried but its quite hard.
The glass is supposed to be onside the chassis and well it is for the 70% of the phone.
But half of the right side and especially the right top corner, you can feel it is off by a bit, and when you press slightly it goes in where its supposed to but doesnt stay there.
It is as if the adhesive of the glass isnt holding on the corner any more.
Sent from my Galaxy Nexus
b1ck132 said:
Well I tried but its quite hard.
The glass is supposed to be onside the chassis and well it is for the 70% of the phone.
But half of the right side and especially the right top corner, you can feel it is off by a bit, and when you press slightly it goes in where its supposed to but doesnt stay there.
It is as if the adhesive of the glass isnt holding on the corner any more.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I would bring that back to where you bought it, fire it across the counter and request a new one! It's obviously a faulty built one.
jd1001 said:
I would bring that back to where you bought it, fire it across the counter and request a new one! It's obviously a faulty built one.
Click to expand...
Click to collapse
This^^^
Take it back and get new phone.
jd1001 said:
I would bring that back to where you bought it, fire it across the counter and request a new one! It's obviously a faulty built one.
Click to expand...
Click to collapse
Here's your sign
TNS201 said:
This^^^
Take it back and get new phone.
Click to expand...
Click to collapse
This.
Who started THIS vile trend of replying with "This." Is it cool or something? I dunno, just figured I'd try it out. Will report back on my findings.
Been more than a month that i bought it.
And can't demand an exchange, got a friend buy it in UK and bring it over here. No way to take it back to UK for a while.
Was just wondering if it happened to someone else, or if someone had any recommendations about what ppssibly could cause this or how i could possibly fix it.
It's been perfectly normal for weeks ;(
Sent from my Galaxy Nexus
b1ck132 said:
Been more than a month that i bought it.
And can't demand an exchange, got a friend buy it in UK and bring it over here. No way to take it back to UK for a while.
Was just wondering if it happened to someone else, or if someone had any recommendations about what ppssibly could cause this or how i could possibly fix it.
It's been perfectly normal for weeks ;(
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
Are you positive it didn't get exposure to excessive pressure? That is the only logical way the glass would start to "pop" out! It's a strange one, never heard anything on these forums that is similar.
Yeah I am pretty positive, I baby my phones, my nexus one is still without a scratch.
That is why I felt the need to create a topic, since I never heard of something similar on any of the phones I owned/followed.
Sent from my Galaxy Nexus
the bottom left of my phone started making a weird clicking noise every time I squeezed it, then I looked at it and the glass was coming off just a tad, I went back to the store and 5 of them that came out were doing the same thing, try your self, squeeze the bottom left of your phone.
b1ck132 said:
I recently realized that the glass on the screen is coming off slightly from the top left corner. I never drooped the phone it never got a hit no nothing.
Any one noticed something similar ?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
was your GN made it china by any chance?
It should have a 1 year warranty against manufacturing defect. If there are no marks on it from a drop, they should replace that no questions asked. If the retailer wont take it, call Samsung.
Are you sure you don't mean the bottom right?
That corner actually is a tad higher than the other corners.
Nope my issue is on top left.
The international warranty doesnt include exchanges. If there is a manufacturing defect then the device should be sent to the country that it is bought in.
At least that is what the warranty card in tge box says.
Sent from my Galaxy Nexus
Hi,
I had similar issue but located in the bottom-right corner of the phone. What I did was a bit risky but I just pressed the glass into the chassis a few times and it went in place. After this it looked perfect. Of course I can't guarantee the result, this is how I made it, of course this is not a professional way to repair things like that .
This is another time I have to write that something wrong is happening with Samsung's quality control. Quantity over quality, definitely. This is not an isolated case, I have read other posts where people were complaining about this, out-of-center camera sensor placement, clicks from the speaker, bad screen etc, not to mention the famous volume rocker bug. When you buy a phone for $700 you at least demand no obvious, visible defects.
I'm also having this issue on my phone, except that the screen is coming off on the left bottom part of the phone.
This was a replacement phone for the first one that was exchanged as DOA because of screen discoloration.
Went to the shop today and the sales rep was giving me attitude ("are you sure it isn't supposed to be like that?") and told me to return on Monday when the manager was there. Have to say I'm not really feeling the charm of Nexus at this point anymore. The iPhone might be fragile and limited, but at least the production quality is top notch...
Cmmts said:
I'm also having this issue on my phone, except that the screen is coming off on the left bottom part of the phone.
This was a replacement phone for the first one that was exchanged as DOA because of screen discoloration.
Went to the shop today and the sales rep was giving me attitude ("are you sure it isn't supposed to be like that?") and told me to return on Monday when the manager was there. Have to say I'm not really feeling the charm of Nexus at this point anymore. The iPhone might be fragile and limited, but at least the production quality is top notch...
Click to expand...
Click to collapse
Have you ever gone to any iphone forums and read problems iphone users have with hardware or software? Stuff happens with anything electronic that is mass produced. Every now and then you will have something that is not like it should be.
Let's not turn this into an iPhone vs Android battle =p
Each phone is graeat, for the ones that love them, each have flaws each have great parts.
Anyways, it appears that this is not an uncommon problem, and I think it is unlikely it will be causing much of a problem in the long term.
I'm pretty positive that the problem is caused by the adhesive holding the glass, not powerful enough, or not put enough at certain areas to hold on to it after a while.
It's not like, it's making the phone unfunctional or anything. I was wondering if it was only me having the problem, and appears not.
This is the 3rd Nexus phone Google had a say in, and all 3 had huge flaws somehow, which is tragic. Maybe G, should be more careful with choosing it's partners =)
wonshikee said:
Are you sure you don't mean the bottom right?
That corner actually is a tad higher than the other corners.
Click to expand...
Click to collapse
Is that how its supposed to be ? My bottom right corner is higher than the benzel, all other corners are a hair below(if looking at in portrait). Being 4 days old planning on going to store to get replacement, seems this would affect a screen protector that i havent installed yet..

Phone dropped :-0

Hey everyone
I have put in a request to get my one x replaced with phones4u due to the screen flexing issue and a creaking case. Yesterday my friend wanted to see the phone as he was thinking of getting one and he dropped it! It wasn't from much of a hight but it has left a few marks in the case...
Should this affect my replacement?
matw01 said:
Hey everyone
I have put in a request to get my one x replaced with phones4u due to the screen flexing issue and a creaking case. Yesterday my friend wanted to see the phone as he was thinking of getting one and he dropped it! It wasn't from much of a hight but it has left a few marks in the case...
Should this affect my replacement?
Click to expand...
Click to collapse
Maybe, depending on the rules of phones4u. Any pictures?
Depends how bad the scratches are and if it's really visible.
Sent from my HTC One X using XDA
They are quite visible scuffs on 2 corners
Sent from my HTC One X using xda premium
you might have some problems because they'll try to say the problem was due to you dropping the phone =\
well i've emailed my account manager to ask now, hopefully they will still swap it for me as its not related to the original fault although i guess there's no way to prove that.
If not that my phone is insured so I'll get a new handset one way or another.
body scratches shouldnt hinder the replacement as long as screws and warranty stickers are untempered.
I think its no Problem, until something is broken. I worked for 3 Years for a HTC Repair Center and we are only look for broken displays and broken Cases. Scratches makes no Problems. Good luck Man
Sry for my English
Sent from my GT-N7000 using XDA
it was dropped from around pocket hight to the floor, its left it with scuffs in the top left and bottom left back corners.
Clearly only scuffs to the casing, no cracks or anything.
TheManGer said:
I think its no Problem, until something is broken. I worked for 3 Years for a HTC Repair Center and we are only look for broken displays and broken Cases. Scratches makes no Problems. Good luck Man
Sry for my English
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
thanks for the response, hope you're right
matw01 said:
it was dropped from around pocket hight to the floor, its left it with scuffs in the top left and bottom left back corners.
Clearly only scuffs to the casing, no cracks or anything.
Click to expand...
Click to collapse
You should be fine. If they ask about the scuffs, you don't need to say you dropped it, but just that you had it in a jeans pocket with those metal rivets and you didn't realise it was rubbing against it, or something like that.
By the way is it the grey one? If so, did it go shiny where there scuffs are?
jonstatt said:
You should be fine. If they ask about the scuffs, you don't need to say you dropped it, but just that you had it in a jeans pocket with those metal rivets and you didn't realise it was rubbing against it, or something like that.
By the way is it the grey one? If so, did it go shiny where there scuffs are?
Click to expand...
Click to collapse
already said its been dropped so i hope its ok, its the white model.
Hard to judge without pics
Sent from my HP Touchpad using Tapatalk 2
http://db.tt/71jZEnHk
http://db.tt/MK6Nb6pp
Links to pictures on dropbox above
Sent from my HTC One X using xda premium
You should be fine I read somewhere they'll class it as DOA and they don't bother with DOA phones. They'll make a claim on it or something. I could be wrong though but clearly the screen issues were the reason you were sending it back as long as that is still there you'll be fine, worse that will happen is that they'll just send it back.
EDIT: Ouch, definitely need a case as I'm just like your friend prone to dropping! No replacement housing available as well for the time being so need to be extra careful.
Ohh nasty, I think it should be fine since its getting replaced for another reason, but they could refuse since the screen flicker issue is getting fixed next OTA update
Sent from my HP Touchpad using Tapatalk 2
Slap your m8 & never again let him touch your phone
Sent from my GT-I9100 using Tapatalk
Sebianoti said:
Ohh nasty, I think it should be fine since its getting replaced for another reason, but they could refuse since the screen flicker issue is getting fixed next OTA update
Sent from my HP Touchpad using Tapatalk 2
Click to expand...
Click to collapse
Its not the flickering, its where the screen goes black and ripples when you press the edge of the phone slightly, plus the case creaks in places.
I dropped my phone yesterday when my team scored in the last minute of a cup semi final. It got trampled. Screen smashed to bits. Remarkably it still works and its still in one piece.
Screen is smashed but somehow held together and still responsive
Sebianoti said:
Ohh nasty, I think it should be fine since its getting replaced for another reason, but they could refuse since the screen flicker issue is getting fixed next OTA update
Sent from my HP Touchpad using Tapatalk 2
Click to expand...
Click to collapse
Source?

Pressing the screen

When I press my HOX screen at some pressure at the bottom it gives some color inside. Whether this is a problem?
Sent from my HTC One X using Tapatalk 2
Put some pressure on your monitor (Providing it's an LCD or similar). What do you see?
Why are you pressing a capacitive screen in the first place??
This is a problem, the glas should never touch the lcd.
And why press capacitive touchscreen? While playing games and caught up in the action? Since it is a tegra3 phone, chances are big
Just did a test . Whether the phone can withhold pressure inside the tight jeans and under the pillow while sleeping.
Sent from my HTC One X using Tapatalk 2
Get yourself a hot chick if u are that much into pressing..but please don't take it out on our lovely One X
Thread closed...
Sent from my Stunning White HTC One X
Techimplant said:
Get yourself a hot chick if u are that much into pressing..but please don't take it out on our lovely One X
Thread closed...
Sent from my Stunning White HTC One X
Click to expand...
Click to collapse
just noticed that mine now as well has that creak on the left hand side..basically when i press the left hand side i can feel it not being in the right place and it makes a noise when i push it down..right side is fine. spoken with my carrier and they said they can not replace it they need to send it to get worked on...and then once i send it they get a quotation of £20 and if i accept then they will try and fix it..i declned that and said you must be joking. spoke to HTC and they said they can not replace it but send it in for repairs..i do not mind that as long as they do not charge me..but they said the carrier should replace it if i am getting dust under the screen...here is hoping..dissappointed..as i really like this phone and already spend like few bucks getting cases for this phone S3 looks more and more appealing now...
Goku80 said:
S3 looks more and more appealing now...
Click to expand...
Click to collapse
And if you don't think it too is going to have its own set of anomalies and QC issues you're a tad naive. Go check out the GN forum, it's the last phone Samsung released. It's a great phone but far from perfect. As is the One X. And as will be the SGS3.
BarryH_GEG said:
And if you don't think it too is going to have its own set of anomalies and QC issues you're a tad naive. Go check out the GN forum, it's the last phone Samsung released. It's a great phone but far from perfect. As is the One X. And as will be the SGS3.
Click to expand...
Click to collapse
s2 came out never had any issues with that Barry mate. Look i do not want to turn this into a flame war..We both know how it was last week. Nah after clearing my head now i have two options.
One i am waiting an answer from HTC till tomorrow afternoon they said whether they will replace it for me or send it for repairs. If they say they will replace it i have a winner. If they say they will send it for repairs then i will go with my network provider. At least if they fix it i know i shall not have the issues as it will come back brand new.
And the good thing i am covered by warranty as it is the stupid flex issue that everyone is facing..Damn thing creaks like hell when you press on it
fallenwout said:
This is a problem, the glas should never touch the lcd.
And why press capacitive touchscreen? While playing games and caught up in the action? Since it is a tegra3 phone, chances are big
Click to expand...
Click to collapse
I thought there was meant to be no air gap between the glass and the One X screen!?!?
Goku80 said:
s2 came out never had any issues with that Barry mate.
Click to expand...
Click to collapse
I had one of the first SGS2's sold in the UK. It was a train wreck. Here's a list of issues I can remember:
1) Devices overheating to the point they shut down
2) Huge color temperature variations in the displays
3) Wireless (both Wi-Fi and 3G) that was so screwed up Samsung was pushing out updates weekly
4) Fingerprints on the inside of the display
5) USB ports that released and got pushed up in to the phone
6) Flashing covering the camera lens from inside
7) Light showing through from the edges of the bezel
8) Bad headphone jacks
If you had one at launch you have either short or selective memory. After about two months all the QC issues went away and we all know how great a phone the SGS2 ended up being. I kept mine for eleven months; the longest I've ever kept a phone. The point being, no phone is immune from issues especially when they first come out.
BarryH_GEG said:
I had one of the first SGS2's sold in the UK. It was a train wreck. Here's a list of issues I can remember:
1) Devices overheating to the point they shut down
2) Huge color temperature variations in the displays
3) Wireless (both Wi-Fi and 3G) that was so screwed up Samsung was pushing out updates weekly
4) Fingerprints on the inside of the display
5) USB ports that released and got pushed up in to the phone
6) Flashing covering the camera lens from inside
7) Light showing through from the edges of the bezel
8) Bad headphone jacks
If you had one at launch you have either short or selective memory. After about two months all the QC issues went away and we all know how great a phone the SGS2 ended up being. I kept mine for eleven months; the longest I've ever kept a phone. The point being, no phone is immune from issues especially when they first come out.
Click to expand...
Click to collapse
i must of been one of the lucky ones then well whatever happens if the phone does not get replaced or if i send it in and they can not fix the issue i will just stick a case on it and not flex the damn thing..but knowing it is there will bug me
Goku80 said:
i must of been one of the lucky ones then well whatever happens if the phone does not get replaced or if i send it in and they can not fix the issue i will just stick a case on it and not flex the damn thing..but knowing it is there will bug me
Click to expand...
Click to collapse
If you think about it, the devices we're buying today are about 1000% more complicated than just two years ago. A lot more advanced crap is being pushed in to a smaller space. At the same time, what we're willing to pay at the high-end is kind of fixed so the manufacturers have to juggle all of that while putting out phones at twice the frequency. My biggest ***** with all of them is the obvious lack of testing that takes place. I can forgive some of the QC issues (provided they go away eventually) but the flickering thing is kind of hard to overlook. As was the GN 2G radio problem. Alas, I think it's going to get worse before it gets better. It'll be interesting to see how Samsung fares with the SGS3. People's expectations are so high I think it'll be hard to meet them.
BarryH_GEG said:
Alas, I think it's going to get worse before it gets better. It'll be interesting to see how Samsung fares with the SGS3. People's expectations are so high I think it'll be hard to meet them.
Click to expand...
Click to collapse
Spot on mate spot on. What would you advise to do mate? I mean phone is fully functional and nothing wrong with it. It is just that gap on the left hand side which is not really visible unless you really look at it and then when you press hard on the left you can feel the phone creaking and trying to adjust the shell to get in place.

Crack in sgs2 benzel !!

Guys
I observed that there is a crack in the benzel of my sgs2. Benzel i mean The plastic lining that wraps around the front glass.
The crack is near the volume buttons.
How easy it is to replace this plastic strip ? Is it risky ?
Sent from my GT-I9100 using Tapatalk
Pretty sure you mean bezel, not benzel.
You would probably have to replace the entire housing which is quite risky to do in my opinion. If you don't know what you are doing you could short the board or break something.
Happened to me too.
Is it really so bad that you need to replace it?
Happend to me too. Seems like that part is very fragile.
I think the only way you can replace it is replacing the whole screen and touch panel.
After that one little crack and that mysterious burn mark right next to it (damn alcohol ) i finally decided to buy a case
TheSniperFan said:
Happened to me too.
Is it really so bad that you need to replace it?
Click to expand...
Click to collapse
Its not so bad. But there is an another minor crack on the exactly other side of the benzel where power button is present !
Is it because of overheat ? I use my phone while charging and battery temps are at 46 celcius when I do that.
I never dropped my phone.
If I go for a new benzel then will I have to pay for new screen too ? Is the benzel glued to the screen ?
Sent from my GT-I9100 using Tapatalk
DaPhinc said:
Happend to me too. Seems like that part is very fragile.
I think the only way you can replace it is replacing the whole screen and touch panel.
After that one little crack and that mysterious burn mark right next to it (damn alcohol ) i finally decided to buy a case
Click to expand...
Click to collapse
Buying a case is not an option for me. I nvr dropped my phone. I use it very carefully , I love my sgs2.
Why would I have to replace screen also ?
Sent from my GT-I9100 using Tapatalk
You can probably have it replaced at an official Samsung repair center. I'm pretty sure they carry one or two sets -- or can order one for you -- but it'll probably set you back a little.
sachinaik said:
Why would I have to replace screen also ?
Click to expand...
Click to collapse
I am not sure about this. But looking at the screen replacement tutorial (http://forum.xda-developers.com/showthread.php?t=1253969) it seems like screen+touchpanel+bezel is a single part. I guess it is somehow glued together. But again, that is just a guess.
just put a little glue in the crack
went to samsung service center.
They said they will replace the Glass panel, Pled screen and benzel.
Oh what the hell, I'll get a new Oled screen. Will go for SGS4 directly
Sent from my GT-I9100 using Tapatalk
I guess it is not covered by warranty, is it? How much do they charge you for replacing it?
DaPhinc said:
I guess it is not covered by warranty, is it? How much do they charge you for replacing it?
Click to expand...
Click to collapse
Approximate 6000Rs I.e, 120$
Sent from my GT-I9100 using Tapatalk
yeah I noticed a crack on my bezel above the volume button. You can kind of see it on the enclosed picture.
I've got a crack in almost exactly the same place as the above pic, slightly closer to the top of the volume button.
Mine has been in an official flip case since day one and has never been dropped. I only noticed the crack when I looked after reading this thread (just like the plastic cover over the home button thread!).
I wouldn't have noticed the crack because of the case. So, is this a design fault? Is it heat or flex that is causing the crack?
The benzel is the most fragile part I think.
I must be because of heat. As the processor, gpu and antenna are near camera module. The top portion gets a lot hotter when accessing 3G.
On top of that if any pressure you put on it going to worsen it. Putting it in a tight jeans and then when u try to remove it out of pocket, u tend to grab the benzel a lot.
All in all, I would go for a metal/polycorbonate benzel in my next phone. That disqualifies SGS3.
Obviously I dont want to pay a hell lot of amount just to get a thin plastic strip (benzel) to be replaced.
Just because samsung did stupid move to glue them together and chose a cheap plastic for benzel I now have to pay a lot.
Waiting for HTC One XL(unibody) with S4 chipset. At least it would come for 3 yrs rather than breaking within 11 Months.
End of rant. Sh**ty cheap plastic Samsung.
Sent from my GT-I9100 using Tapatalk
same issue for me
i discovered that few weeks after buying the device
i kept the device with that crack but i worried about it
"happy" to see that i'm not the only one
Incredible! Saw this thread and wondered what the hell a 'benzel' was. After reading that it had happened to more people, I just checked my phone and it has the same crack.
Had never noticed this until now. Fortunately mine is a black phone, so not as noticeable as the white.
check my post open in may
http://forum.xda-developers.com/showthread.php?p=13714534#post13714534
Wow i had one also at the power button side, i thought it os scratch first but not. Interesting how could this be happen
Sent from my GT-I9100 using XDA
sachinaik said:
Just because samsung did stupid move to glue them together and chose a cheap plastic for benzel I now have to pay a lot.
Waiting for HTC One XL(unibody) with S4 chipset. At least it would come for 3 yrs rather than breaking within 11 Months.
End of rant. Sh**ty cheap plastic Samsung.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
the phone isnt exactly broke though is it?? a part of the phone could have been designed better maybe but it isnt broke and doesnt stop he phone from working its also very hardly noticeable
ive had one sgs2 for around a year now and used it hard and it works great
oh and watch these videos and then try and say the sgs2 wont last 3 years if looked after properly
http://www.youtube.com/watch?v=nXOezJKpOsg
http://www.youtube.com/watch?v=uFKmvJ0zIiY
also the bezel scratches easy is there any point in replacing it when you could pay to have it fixed then drop the phone or scratch it against something??
wear marks are never good to see but they do happend

[Q] Does your device creak?

I got my note 4 days ago. At first everything was ok, but yesterday I noticed my device is terribly creaking. Almost every time I touch the back it sounds like the plastic would break a little bit (Although I don't think it would actually break).
Do you have the same issues? Or should I sent it back and get a new one, since it's really annoying me...?
Thank you )
Nope.
Gasaraki- said:
Nope.
Click to expand...
Click to collapse
This ^
ArticFox918 said:
This ^
Click to expand...
Click to collapse
This x2.
yanni_puffin said:
I got my note 4 days ago. At first everything was ok, but yesterday I noticed my device is terribly creaking. Almost every time I touch the back it sounds like the plastic would break a little bit (Although I don't think it would actually break).
Do you have the same issues? Or should I sent it back and get a new one, since it's really annoying me...?
Thank you )
Click to expand...
Click to collapse
Mine creaks a little in the bottom right corner. Everything else is fine. I think it's the plastic back giving a bit. I had this on the Nexus 10 as well.
Creaking is for Hollween not for my Tablet!
yanni_puffin said:
I got my note 4 days ago. At first everything was ok, but yesterday I noticed my device is terribly creaking. Almost every time I touch the back it sounds like the plastic would break a little bit (Although I don't think it would actually break).
Do you have the same issues? Or should I sent it back and get a new one, since it's really annoying me...?
Thank you )
Click to expand...
Click to collapse
Yes, When I held the tablet with my left hand to touch the screen with my right it creaked like a rock band with bad music! Geeish.....the silver chrome or whatever the material is wasn't tight and it just bend. I returned it right away. I really didn't want to return it. However, I paid full price and not second hand money so I expect the performance to be right, that means no noise. When listening to music or watching a movie it seems as if someone was moving around and that can be pretty annoying. I tried holding it different ways with no change. So back it went. Let Samsung sell. This I know imagine you trying to sell it to the next person, what do you think they might say and how much will the value go down?
Doc
yanni_puffin said:
I got my note 4 days ago. At first everything was ok, but yesterday I noticed my device is terribly creaking. Almost every time I touch the back it sounds like the plastic would break a little bit (Although I don't think it would actually break).
Do you have the same issues? Or should I sent it back and get a new one, since it's really annoying me...?
Thank you )
Click to expand...
Click to collapse
Yes, As soon as I opened the package, I noticed the bottom right hand corner was creaking an popping. It is not like I was looking for it. That made me investigate if the rest of the trim was doing the same. If you put your mind into into it, you can get some creaking from other ends of the trim but nothing like the bottom right hand corner. Every time I pick it up, it is annoying me so much that I feel I should take it back. I am not sure the guys at PCWorld would accept this as a reason for full money back or replacement claim. I do like the tablet, but do not want a noisy plastic in my hands.
Is this enough of a reason to ask for a replacement?
kashbg said:
Yes, As soon as I opened the package, I noticed the bottom right hand corner was creaking an popping. It is not like I was looking for it. That made me investigate if the rest of the trim was doing the same. If you put your mind into into it, you can get some creaking from other ends of the trim but nothing like the bottom right hand corner. Every time I pick it up, it is annoying me so much that I feel I should take it back. I am not sure the guys at PCWorld would accept this as a reason for full money back or replacement claim. I do like the tablet, but do not want a noisy plastic in my hands.
Is this enough of a reason to ask for a replacement?
Click to expand...
Click to collapse
Sadly I dont think it is (pure guess so dont take my word for it) BUT I can 100% say that your Tablet will have a little bit of lightbleed along the bottom and sides....this alone is a good enough reason for them to accept and exchange - Good luck.
Geordie Affy said:
Sadly I dont think it is (pure guess so dont take my word for it) BUT I can 100% say that your Tablet will have a little bit of lightbleed along the bottom and sides....this alone is a good enough reason for them to accept and exchange - Good luck.
Click to expand...
Click to collapse
Hi,
Could you please elaborate on the light bleed issue. How do you determine if you have a light bleed and what is the significance of it.
Regards,
kashbg said:
Hi,
Could you please elaborate on the light bleed issue. How do you determine if you have a light bleed and what is the significance of it.
Regards,
Click to expand...
Click to collapse
Put screen britghness to 100% and open this http://www.net-tracker.net/android/wp-content/uploads/2011/05/black_bg_1024x768.png, make sure it covers the entire screen inc notifications part and then switch off your lights in your room and you will then see light bleed, Its nothing major and common on LCD'S but it is a valid reason for a return/exchange.
I had lightbleeding on my first note but I found it to be acceptable however on my 2nd tablet I found the bleeding to be excessive and off putting so I got a refund from John Lewis,
Anyways this thread should give you an idea too - best of luck :good: http://forum.xda-developers.com/showthread.php?t=2554094
Geordie Affy said:
Put screen britghness to 100% and open this http://www.net-tracker.net/android/wp-content/uploads/2011/05/black_bg_1024x768.png, make sure it covers the entire screen inc notifications part and then switch off your lights in your room and you will then see light bleed, Its nothing major and common on LCD'S but it is a valid reason for a return/exchange.
I had lightbleeding on my first note but I found it to be acceptable however on my 2nd tablet I found the bleeding to be excessive and off putting so I got a refund from John Lewis,
Anyways this thread should give you an idea too - best of luck :good: http://forum.xda-developers.com/showthread.php?t=2554094
Click to expand...
Click to collapse
Thanks,
Nope, no creaking and barely any noticeable light bleed (Just 2 spots on the bottom i have to tilt to see)
Eric214 said:
Nope, no creaking and barely any noticeable light bleed (Just 2 spots on the bottom i have to tilt to see)
Click to expand...
Click to collapse
mine creaking along left side
funfun99999 said:
mine creaking along left side
Click to expand...
Click to collapse
same here
Got mine 2 weeks ago, and it sounds like a bowl of snap, crackel, and pop, sitting on bubble wrap.
If i look at it wrong, it makes noises. I might take it back and have them look at it... see if that warrants an exchange.
Sent from my freekin huge Note 10.1 ?
Eric214 said:
Nope, no creaking and barely any noticeable light bleed (Just 2 spots on the bottom i have to tilt to see)
Click to expand...
Click to collapse
If your one is not creaking then this definitely should be a rightful exchange claim for all those unfortunate to pick up badly put together tablets.
I am even considering getting my money back and going the Apple way. Excellent build quality, and I know that because I got some for the kids.
yeah maybe idk. Sammy is also known for build issues lately so you have to really inspect before you take home. The Note 3 home button is all wonky and wobbly on a lot of units.
Eric214 said:
yeah maybe idk.
Click to expand...
Click to collapse
Sorry for the question, but what is "idk" in your post?
Having a creaking case, would that get worse in terms of speading all around the tablet's trim?
Any experiences but no guesses please!
kashbg said:
Sorry for the question, but what is "idk" in your post?
Having a creaking case, would that get worse in terms of speading all around the tablet's trim?
Any experiences but no guesses please!
Click to expand...
Click to collapse
"IDK" means "I Dont Know".
I guess if the creaking was coming from say a loose glass to the digitizer i think it could be something that spreads. Since if the glass isn't glued down well enough i could see slight dust getting in there and causing more separation over time. I doubt this is the case as you'd see bubbling at the edges if that was happening.

Categories

Resources