Develop Bugs

Dude! this is a serious problem! Someone to get what it is?

Hey guys, I've updated to wm6 and sometimes after my p3300 started to either black out or get into a irresponsive mode where the screen is just lightly on. No buttons replies! Once its happens the only solution is to do a soft reset and then pass to phase 2, try to restart it. That bad boy gets stuck directly at the loading process and its maybe - with luck- that it will go through the os loading after 10 tries and soft resets. The phone can work then from five minutes to ten hours and will get stuck again. What is Happening???!!! Also I don't think its the battery cause it does the same thing even with full battery. Last detail, I just passed the warranty limit and its too late to send it back. What can I do??

Did you updated with the official Rom?
Try to flash it again.
Or just try it out a cooked WM6.1 ROM. I recomend Artemis touch Vanilla 4.02.
Cheers

You tried a hard-reset?

babar_almighty said:
Hey guys, I've updated to wm6 and sometimes after my p3300 started to either black out or get into a irresponsive mode where the screen is just lightly on. No buttons replies! Once its happens the only solution is to do a soft reset and then pass to phase 2, try to restart it. That bad boy gets stuck directly at the loading process and its maybe - with luck- that it will go through the os loading after 10 tries and soft resets. The phone can work then from five minutes to ten hours and will get stuck again. What is Happening???!!! Also I don't think its the battery cause it does the same thing even with full battery. Last detail, I just passed the warranty limit and its too late to send it back. What can I do??
Click to expand...
Click to collapse
did u run a uspl first?

jahrami said:
did u run a uspl first?
Click to expand...
Click to collapse
If he upgraded it, then he didn't need it or it was the original WM6 ROM.
The problem was after upgrade!
Flash it again or do a hard reset!
Cheers

Thanks for the help. Yeah I installed the touch Vanilla 4.02 cooked WM6.1 ROM. And I believe the uspl was in the file. As far as I remember I ran it but had no feedback whether it worked or no...
Would a hard reset get the bad boy back to wm5 or reboot with wm6.1?

I *should* reset/default to factory settings for whatever ROM was last successfully flashed to the device. You will lose any installed programs/data so so a PIM backup/ActiveSync before hand if required.

HELP! I think brick my phone!!

Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all

dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.

henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!

i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?

just Change your ROM..,

hard reset is somthing i dont want to do. Is there any other option?

kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.

same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error

Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.

henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution

Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705

cool, will try that one. thnx

On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me

dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.

Returning to Stock SPL (With a twist)

Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.

slow23 said:
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
Click to expand...
Click to collapse
You can do thAT, on this way
Plug the USB cable to connect your Diamond with PC, make sure ActiveSync connected.
Copy "SSPL-Manual.exe" to Internal Storage on your Diamond.
On your Diamond, execute "SSPL-Manual.exe" and confirm to trust the excutable. Your Diamond screen will turn "BLACK" and ActiveSync will disconnect. *This is normal behavior***
Execute the ROMUpdateUtility.exe.
Your Diamond will automatically restart when finished.
To make sure stock SPL has been flashed back, press and hold "Vol-" key and use stylus to press reset once. until you see the tricolor screen and if you can see version of spl which before you flashed, it's ok!
Greetz

sucro said:
On your Diamond, execute "SSPL-Manual.exe" and confirm to trust the excutable.
Click to expand...
Click to collapse
Thank you sucro, but exactly that is my problem, since my screen is dead I can't confirm anything...

when i want to install the original htc rom after received the upgrade present to 100 this error message appear .for this aim i need to downgrade my spl to stock. . is there any manual or howto link and also original spl files please link it. i have been searching for a while.
my stock spl was 1.93.
any help would be appreciated.

masa1977 said:
is there any manual or howto link and also original spl files please link it.
Click to expand...
Click to collapse
It's in the HardSPL Developer Edition Thread.

thanks a lot slow23

slow23 said:
Thank you sucro, but exactly that is my problem, since my screen is dead I can't confirm anything...
Click to expand...
Click to collapse
You are welcome, try this, i discover this combination of buttons
ENTER+VOL UP = ALIGN SCREEN
that means, with this combinations of buttons, you can directly enter ALIGN SCREEN options, and try to align screen , sometimes this helped me, cause my touch screen has same problem, it start to freeze randomly, i don't know why, sometimes in right, sometimes in left corner, up-down, randomly, i noticed that htc diamond when is exposed , when i'm out and it's sunny weather, it stop to responding on touch, one my friend specialist for mobiles, tell me, maybe this happen, cause bellow screen in some pda is some thin rubber, and from heat it start to expand, and that cause problems, maybe this situation is in htc diamond...
greetz and good luck

Returning to Stock SPL
slow23 said:
Hi there,
I'd like to return my Diamond (O2 XDA Diamond) to stock SPL (1.37) since my touchscreen is out of order and I'd like to send it to O2.
I already flashed the stock ROM and now want to flash the stock SPL.
I was following several tutorials on how to do this, but had no luck.
The problem, I think, is that I need to confirm something on my device before flashing (SSPL gives a warning in my understanding), but I can't since I'm stuck on the "Tap on Screen to start Windows mobile device" (is in German for me, but the first screen after Hardreset).
Any Hints on passing that screen via Registry or flashing Stock SPL without any confirmation is highly appreciated.
Click to expand...
Click to collapse
Hi
I have similar problem and I will tell you what I did to get back to Stock SPL.
1. Flash the BSBs latest ROM from this thread, http://forum.xda-developers.com/showthread.php?t=506533 . Either by RUU or moving the diaming.nbh to the storage, this ROM does not require allignment or any other input.
2. Install My Mobiler from http://mymobiler.com in your computer, where you can see your mobile screen in your computer and operate using your mouse.
3. Then return to the stock SPL as given in this thread http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39.
4. Flash your ROM again from the HTC. This can be done once the system connects to the phone.
I am successful in doing the above.
Regards,
V.Balaji

I bricked my Diamond

Hi guys, please someone helpme.
Yesterday i install some app on my coocked diamond (Energy Room 3.0 Build 60509), the apliction is SPB Wirless Monitor. In the final proces of the instalation my Diamond hangs up and i was forced to remove the batery to cancel the instalation and restart it. After this issue my Diamond never start again so i made a Hard Reset without problem and reinstall the same Room. But now every time that i restart my diamond the same reinstall process begin. Sometimes he starts ok without the instalaltion wizard and then i can connect ActiveSync Without problems, but just sometimes. What should i o do??? I have Hard SPL 1.4. Should i upgrade to 1.93?? There is any way to let my Diamond with the original Rom and then flash it again???
Something important is that when the resintall is in process it seems like the operation system is running in background, i can see the EnergyRoom Toolbar on top of my diamond and sometime when i press the power button the ShutXP windows appears.
Thanks a lot guys for your help, and sorry for my very very poor english
Andres

andres_lol said:
Hi guys, please someone helpme.
Yesterday i install some app on my coocked diamond (Energy Room 3.0 Build 60509), the apliction is SPB Wirless Monitor. In the final proces of the instalation my Diamond hangs up and i was forced to remove the batery to cancel the instalation and restart it. After this issue my Diamond never start again so i made a Hard Reset without problem and reinstall the same Room. But now every time that i restart my diamond the same reinstall process begin. Sometimes he starts ok without the instalaltion wizard and then i can connect ActiveSync Without problems, but just sometimes. What should i o do??? I have Hard SPL 1.4. Should i upgrade to 1.93?? There is any way to let my Diamond with the original Rom and then flash it again???
Something important is that when the resintall is in process it seems like the operation system is running in background, i can see the EnergyRoom Toolbar on top of my diamond and sometime when i press the power button the ShutXP windows appears.
Thanks a lot guys for your help, and sorry for my very very poor english
Andres
Click to expand...
Click to collapse
Hello .. Don't Worry ! I had the same problem ..
First of all you have to update your HSPL to 1.93 Unsigned .. Here
And you have to follow these instructions .. Here (you can find the mtty on this forum or by searching in google) ..
Then Re-flash your rom .. preferably from your storage card ..
Skoo

Skoo said:
Hello .. Don't Worry ! I had the same problem ..
First of all you have to update your HSPL to 1.93 Unsigned .. Here
And you have to follow these instructions .. Here (you can find the mtty on this forum or by searching in google) ..
Then Re-flash your rom .. preferably from your storage card ..
Skoo
Click to expand...
Click to collapse
Thanks mate, im doing right now

No bootloader on HX4700

Hi!
I've got an iPAQ hx4700, well I HAD one yesterday, now I think I've got a piece of metal with electronic inside (until I can fix it and use it). The problem is:
Yesterday I tried to install Sprite Backup on my iPAQ and it was stuck on the installation screen. I soft-reset it and it was stuck on the HP Invent screen. I tried to do a hard-reset and it got stuck on the screen that says"Please wait, cleaning data" (or something like that). I had Alkor 21054 rom with the Wifi patch. I saw that Alkor had made version 21057 and when it began to flash it suddenly said Error and a lot of numbers started to appear on the mtty.I took it out from the dock and soft-reset it and it didn't do Anything at all. Then I tried to enter the bootloader mode (iTASK+Contacts+Soft Reset) and anything again. The charging led doesn't blink when it's connected and my PC doesn't detect it. I know it's not dead because it has never fallen to the floor and it has never get wet, as I said, it was working yesterday.
Please help me.
Thanks in advance

¿Anyone knows anything about this? Please...

vagaerg said:
¿Anyone knows anything about this? Please...
Click to expand...
Click to collapse
Have you tried removing your battery will wait a few minutes and put it back?
After attempts to load and once loaded iPAQ tries to install a new ROM.
Alkor has a new ROM posted on XDA and 4PDA, is more stable than the ROM 20514. When these loading this ROM with "BootLoader_GUI" the process does not reach beyond 38%. When you reach the 38% make two Hard-Reset and you should work.
Good luck.
Greetings

My iPAQ has been without battery during all the night. And what do you mean with "After attempts to load and once loaded iPAQ tries to install a new ROM"
Thanks a lot.

vagaerg said:
My iPAQ has been without battery during all the night. And what do you mean with "After attempts to load and once loaded iPAQ tries to install a new ROM"
Thanks a lot.
Click to expand...
Click to collapse
Hello.
I leave this internet address PDAVIET if it's any help.
It explains how to recover hx4700
http://www.pdaviet.net/showthread.php?26286-PHƯƠNG-PHÁP-CỨU-HP4700-BỊ-LỖI-TRONG-QUÁ-TRÌNH-UP-ROM
I hope it is helpful.
A greeting.

Hello
try remove backup battery (inside the pocket) and wait couple minutes ...
chears

Thanks to all of you, but I have already taken the backup battery for a while and nothing changed and it doesn't get into the bootloader mode, so I can't flash it with an SD card.
Does anyone know what I could do?
Thanks in advance.

Hi Vagaerg, did you ever get this issue sorted? I'm having the same issue with a iPaq HX4700 that I just purchased.