Related
Hi all,
Plz bear with my ignorance when it comes to upgrading ROMS etc.
Basically yesterday I upgraded to O2's official WM6 ROM .... and find it "not so good". It is slow to respond etc( i found it slower than my WM5 )
So now I wanna move to BB4, question is how do i do it??
I have downloaded an Artemis_USPL from Prof. So what are the steps I need to do??
Is it ...
1) Run start_uspl.exe from the zip file and let it complete.
2) Run( double click ) the img-46785-Tom_B_B_v4_0_TouchFlo_Professional.exe
Is that all I need to do?
Also, if I brick it .... what do i need to do to revert to an original ( say o2 WM6 ROM) ... is it USPL it again then run the O2 rom??
Many thanks
Fahd
yep, thats what you need to do. both 1) and 2) will need some user input and after it's done the device resets itself. so after 1) wait until restart is complete, then do 2).
for your original roms you dont need uspl. but if you are not completely sure, run it anyway.
Thanks for that. Time to give it a whirl! Wish me luck!!
Hmmm doesnt wanna play ball.
Did the above and ran uspl .... got stuck on a white screen. So I rebooted the Orbit and tried running the BB4 .exe ... got to 3 % and told to that .......
Error 270: Update Error. The image file is corrupted. Please check your update ultilty.
Can anyone help?? It will not upgrade ROM.
I keep getting the white screen and it cant run ROM utility(Error 224: Device not responding ).
I then reset the device and run BB4 ... I get to 3% and then I get error:270 ( image file is corrupt ). I have downloaded the ROM again and still get this error.
Any helpers out there??
Thanx
Fahd
I had the ame problem mate. What you need to do is revert back to the original 02 WM5 Rom which can be found on this forum somewhere. Then once installed, run uspl & then the BB4 Rom & hey presto your sorted.
For some reason i couldnt get uspl to work on WM6 02 rom either
Hi fadhp,
Ensure that your windows firewall is disabled and also you shut down any anti-virus programs running on your PC
I also found that turning off all the plugins on the today screen helped me to upgrade my O2 orbit.
I went through the same issues as you with corrupted images at 2% , however following the steps above helped me.
The firewall was disabled and so was AV ... so not sure about next steps.
I thibnk I shall try downgradind to original O2 WM5 rom and then upgrade ....
question is where in this forum is that Rom!! I had seen it before but as usual when u dnt need something you find it and when you need it u cant!
Will keep on searching .... anyone know the link plz save me some time!
Thanx
F
question is where in this forum is that Rom!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=314866&page=2&highlight=orbito2uk-wm5
The link for the original O2 WM5 is in post #13, the 3rd one down.
Thanks for that.
Downgraded to WM5 now .... and tried to run BB4 .... still no joy. Same error.
Maybe i'll try another ROM just to see if that works and if it doesnt then MUST be my PC or something.
Here goes!
Cheers guys will kepp u posted.
F
Tried another machine ..... XP SP2 not FW or AV still failed.
Always get to 3% then crash.
HELP!!
Tried BB3.7 still no luck. 3% and crashes .... on 2 diff PC's.
I noticed that USPL runs ver 3.0.3.0 of the update utility but the actual ROMS when you launch them are running 3.6.3.6 ... does this make a difference?
Help guys plz!
Those are the issue no's of the rom upgrade utilities - it does not matter. It appears you are still not cid unlocked. whats your spl no? take it from first bootscreen.
SPL is 1.25.0000
IPL is 1.25.0001
Ideas??
The spl from uspl is 1.110000 so you need to run uspl again. Even if the screen goes blank wait till it says your rom has been upgraded.
Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??
Some people had to run uspl 3 times in a row for it to work. Did you wait a while on white screen before giving up? I guess you are on 02 wm5 at the moment if not flash to that and try again. If you are do a hard reset and try again - few times in a row.
OK looks like USPL doesnt work for me!
Everytime I ran it under WM5 i still had 1.25.0000 and then i upgraded ROM to O2 WM6 and now everytime I run USPL it stays at 3.04.0000.
It doesnt do anything after the white screen ..... just sits there like a duck!
With so many ppl having succesfully done this surely someone can be a Wizard of Orbit??
fahdp said:
Thing is when i run USPL and it gets to 100%, all i get is a white blank screen and nothing happens. So i have to reset the device.
Then i try and run the BB4 etc install and get to 3% before it conks out.
When I get the white screen ... what else can i do??
Click to expand...
Click to collapse
Had same problem. Dont reset the phone but just if you see only the black screen, run the USPL update.
I have an orbit and uspl flashed first time from wm5 and wm6 - is yours usa orbit? If you really cant run uspl then it will need cid unlock from imei check - it costs but you have permenant cid unlock so you need not worry again.
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!
i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?
just Change your ROM..,
hard reset is somthing i dont want to do. Is there any other option?
kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
cool, will try that one. thnx
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.
Hi everyone,
I've been trying to cook a WM6.5 in Portuguese (I used some files rom WM6.1PTG and I translated some others) with Visual Diamond Kitchen and in the cooking part all went well, I have the .ndh file generated and without errors.
Then I flash the Diamond and after the flashing is concluded the diamond makes itself a reboot and stops after the first boot screen with TouchDiamond and the red information about the versions.
I tried to do a hard restart, soft, remove and out again the batery without success.
Does anybody have the same problem?
I'll appreciate help.
Best Regards,
Armaia
Do you removed "FWUPDATE"?
pspeter said:
Do you removed "FWUPDATE"?
Click to expand...
Click to collapse
that FWUPDATE troubled me a lot!!!!
No, I didn't. Do you think that could be the problem? I,m going to try.
Thanks
Try to change the rom . Pull out the stylus , Press the reset button and hold the VOLUME DOWN and the right down button . After connect to pc
Hi,
I removed the FWDATE but the problem occurs in the same way.
AM
Armaia said:
Hi,
I removed the FWDATE but the problem occurs in the same way.
AM
Click to expand...
Click to collapse
Try to restore first your original shipped rom and then reflash your own rom.
Hi All,
I have the same problem, I flashed MightygroovyROM, after first boot, it stops, there is only "Touch Diamond" on the screen. I tried hard reset but doesnt work. Since activesync connection couldnt establish, I couldnt do anything.
Anyone know another technique to connect without activesync ? or is there any other way to go back old rom any flaeshing a new rom ?
Best regards
Kag
Armaia said:
Hi everyone,
I've been trying to cook a WM6.5 in Portuguese (I used some files rom WM6.1PTG and I translated some others) with Visual Diamond Kitchen and in the cooking part all went well, I have the .ndh file generated and without errors.
Then I flash the Diamond and after the flashing is concluded the diamond makes itself a reboot and stops after the first boot screen with TouchDiamond and the red information about the versions.
I tried to do a hard restart, soft, remove and out again the batery without success.
Does anybody have the same problem?
I'll appreciate help.
Best Regards,
Armaia
Click to expand...
Click to collapse
I installed a HardSPL 1.40 Olinex. Then Custom RUU 23125 from here. I installed a wm 6.5 (i gues so). I run the OS and i began to personalize my new OS. The system buged and crashed. After reboot (by taking out the battery) the OS wouldn't start. I tried hard reset, but nothing. I am sorry for the very bad english, but i need help urgently ! ! ! I have the phone from 4 days If i only knew what will happen.... Thank you!
atomheart said:
I installed a HardSPL 1.40 Olinex. Then Custom RUU 23125 from here. I installed a wm 6.5 (i gues so). I run the OS and i began to personalize my new OS. The system buged and crashed. After reboot (by taking out the battery) the OS wouldn't start. I tried hard reset, but nothing. I am sorry for the very bad english, but i need help urgently ! ! ! I have the phone from 4 days If i only knew what will happen.... Thank you!
Click to expand...
Click to collapse
I would suggest you by following solution
1.Boot from MTTY way
2.Try SPL 1.93
3.Change your battery--i experienced once when i flash a new ROM and my diamond stuck on "TOUCH DIAMOND-the first screen" and then keep reboot. Then i change my battery, it boot just like nomal.
Good Luck.
ku9911 said:
I would suggest you by following solution
1.Boot from MTTY way
2.Try SPL 1.93
3.Change your battery--i experienced once when i flash a new ROM and my diamond stuck on "TOUCH DIAMOND-the first screen" and then keep reboot. Then i change my battery, it boot just like nomal.
Good Luck.
Click to expand...
Click to collapse
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
atomheart said:
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
Click to expand...
Click to collapse
no need to get back to 1.39 .. olinex 1.40 works fine. maybe just the rom is faulty when after reset+vol down+enter does the same error!
get onto boot loder (reset + vol down) when you get the "serial" label, plug in the usb, do the task 29 to format the phone, and get some other rom, and flash it with provided exe file.
atomheart said:
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
Click to expand...
Click to collapse
Are you using Atlas rom? or what? This rom has a bug in this moment of installation that sounds like your behavior...
I have several problems with 6.5/6.5.x newer builds before I switch to hardSPL 1.93 developer edition. This hardSPL could be installed to the phone also in the situation when no active sync connection is available. Simply run "installer" and go through the process as usual, you will see that it works...
Mbiba
mbiba said:
Are you using Atlas rom? or what? This rom has a bug in this moment of installation that sounds like your behavior...
I have several problems with 6.5/6.5.x newer builds before I switch to hardSPL 1.93 developer edition. This hardSPL could be installed to the phone also in the situation when no active sync connection is available. Simply run "installer" and go through the process as usual, you will see that it works...
Mbiba
Click to expand...
Click to collapse
I am with Energy ROM 2.xxxx. I' ll try this right now.
260 error
it ' s give me error 206 (telephone not connected). How to instal whatever without a USB connection and ActiveSync? It doesn' t work> It' s stuck now on Starting Windows screen: Preparing for first use....."
Flash a stock rom with stock spl from bootloader (press soft reset then volume down ) then re try with hard spl and put another rom like energy rom that works for sure (at least for me)
atomheart said:
OK, so i now can boot the OS, after perssing turn on + down + middle key and format. But every time it stop working at the moment when i have to tap for the last time the screen to let me in. I press, press, press... Press with the finger and with the styler but nothing happened and i have to reboot and do all this shi*s again. What is MTTY and how to install SPL 1.93 without OS on the phone? Thanx !
Click to expand...
Click to collapse
seems u did not read much before flashing. I guess you can easily solve the problem following Post2. You are doing Hard reset (reset+down+middle). It would not solve the problem. For new flash or mitty you have to go to boot loader screen (reset+down vol. key) (not the middle key). Also Active sync menu: file->connection settings, deselect 'Allow USB connection'.... then start flashing new rom (more details see Mitty or flash thread):
http://forum.xda-developers.com/showthread.php?t=540290
http://forum.xda-developers.com/showthread.php?t=416211
in simple english,
MITTY: for formatting ROM so that no old data will mess up with new rom (not always required but solves many wiered problems)
I once faced such problem , Mitty (once) and flashing rom (twice) solved the problem
HELICOPTER88 said:
Flash a stock rom with stock spl from bootloader (press soft reset then volume down ) then re try with hard spl and put another rom like energy rom that works for sure (at least for me)
Click to expand...
Click to collapse
Thank you man. It works now. I installed this rom: RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe.
Can you, or anybody give me some advice about which Rom should I install, to install wm 6.5 for my phone. Is there some "light" ROM, or something, for wm6.5 (working).?
atomheart said:
Thank you man. It works now. I installed this rom: RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe.
Can you, or anybody give me some advice about which Rom should I install, to install wm 6.5 for my phone. Is there some "light" ROM, or something, for wm6.5 (working).?
Click to expand...
Click to collapse
I think currently the best is ralphusion J with only few bugs and issues.
Mbiba
hi everyone
hope u keeping well,
i bought htc diamond and i tried every thread here in the forum just to do hard spl for my device and its not working keep 0% till in the end i get error connection i went to htc website and downloaded rom from them the original and re-flash it on my device and it worked fine ... but when i try to use hard-spl so i can install any other rom like energy or any one its not working keep on the 0% .... my device DIAM100 and the spl on it 2.0.3 or some thing like that and i rly rly want to install custom rom pls help
any one pls ?
Problem Solved
A.J said:
hi everyone
hope u keeping well,
i bought htc diamond and i tried every thread here in the forum just to do hard spl for my device and its not working keep 0% till in the end i get error connection i went to htc website and downloaded rom from them the original and re-flash it on my device and it worked fine ... but when i try to use hard-spl so i can install any other rom like energy or any one its not working keep on the 0% .... my device DIAM100 and the spl on it 2.0.3 or some thing like that and i rly rly want to install custom rom pls help
Click to expand...
Click to collapse
download this, and run first the diamond-sspl.bat
if it runs successfully and ur screen turns black...then run DiamondCustomRUU.exe again to flash Hard SPL 1.24
in the folder u have diamond-sspl.bat and hard spl 1.23 and 1.24, run the hard spl 1.24 for HTC Diamond, then flash a cooked rom.
PM me is your problem solved
Good Luck
Hello, i had the same problem and i tried this solution with success, many thanks!
the problem now guys my dimoand not even connecting with the active-scyn through usb ... it connect as flash memory but refuse to connect through cable
You may have selected default as Disk Drive and ticked "Dont ask me again'
then you need to go to settings > connections > USB to PC and tick
"Ask about connection type when I connect"
Ive had the same problem ( connection 260) And tried the above, but i still get the error?
Tried that myself, and I'm stuck on the coloured screen with an error: Upgrade ROM code error please try again. DIAM500- SPL-0.62.0000 - MicroP-Diam (LED) vB. Doesn't leave this screen until I try to flash with nbh, and it gives communication error no matter whatI try. Bricked?