Ouch!!!!!
I tried the radio update, during which I got a communication error.
Now I have a brick!
The blue i-mate screen comes up. the rom info is displayed (radio still says 1.03.00) and there it is stuck.
Now what? Hard reset? (how do you hard reset from that point?)
Bootloader? How is that done?
Please help. I am off to go under my blanket to cry.
Just retry the radio update again and again, put it in bootloader
How do I get bootloader? I tried the camera+power+reset combination but it still does the same thing, no bootloader menu.
Or do I have to have the bootloader files in the storage card first?
Can I also get help on how to extract the files. I don't know where the installer is putting the binaries, and at this point I would very much prefer not guessing what files to put where.
bootloader
try this
light + power + reset
Re: bootloader
dherrero said:
try this
light + power + reset
Click to expand...
Click to collapse
That did something. Now I have a white screen (no light) that says "Serial" on top and "v 0. 60" at the bottom.
I have the following files in the sd:
EnterBL.exe
GetServiceData.exe
radio_.nbf
RUU.conf
RUU.dll
UI.dll
But it is not doing anything.
yes, now it's in bootloader. Now connect the jasjar to your pc and execute the upgrade. If it doesnt work kill the activesync processes (WCESMgr.exe and wcescomm.exe) and repeat the upgrade
OK! That seemed to work, but it still gets stuck at the bootup screen (except now it shows the new radio version).
The update program asks for a hard reset, but others in another thread mentioned they did not need a hard reset after this update.
Is there something else I can try before trying a hard reset?
I just spent a week to set the damned thing to the way I like, and don't want to do all that again.
I didnt hard reset. try resetting 2 or 3 times. If it doesnt work then hard reset
I took out the battery. Will wait a bit and try resetting a few times.
How long does it take for yours to show some activity after the rom versions are displayed?
It does take longer for this device to bootup, but I wonder if the new rom made a difference there.
Usually the blue boot screen disappears in 30 seconds. But when i installed pocket plus many times it keeped freezed and a had to reset 3 o 4 times.
Is your case?
dherrero said:
Usually the blue boot screen disappears in 30 seconds. But when i installed pocket plus many times it keeped freezed and a had to reset 3 o 4 times.
Click to expand...
Click to collapse
Hmm. I don't have pocket plus, but I have the spb gprs monitor (or whatever it is called) at the startup. Maybe that's causing a problem with the new radio.
I will reset 3 - 4 more times and then do a hard reset.
If it does not come back from hard reset, the bawling you hear all the way out there is me.
he he . I ve spb gprs monitor too and it works fine.
good luck :wink:
When perform soft reset, wait 1 or 2 minutes before doing other soft reset
OK, now it is time to cry.
It is not coming back from hard reset either.
It is officially a brick. Any more ideas? Please?
thy to make the update again. Perhaps this revives it
if a radio update is available, maybe a rom update is around the corner.
Or just a recovery standard rom
Does exits an official rom to reinstall jasjar rom?
I am doing the radio update again to see if that helps.
I will probably need to contact imate support for a recovery rom image I suppose. I suppose I should tell them what I was doing.
But this update was from imate, right, so I didn't do anything "wrong".
If someone has a rom, please let me know.
So, I am getting the runaround.
iMate says they don't have the rom to send me and I should send the device to the service center. The service center says they don't work on JasJars there.
So I am stuck with a paperweight?
Try Hard reset....
Just try to Hard reset .. most probably one of your already installed S/W causes the machine to hangup.... once you clear after Hard reset it should boot up.. worse while before sending it back to imate and being blamed for loading un-official and not released update... Unfortunatly there no "shipped rom" yet. you best choice to recover the paper weight is to hard reset and perhaps load S/W again. ... I have been trying to dump the rom for days with no success .. once one of us can do it we are releaseed.
Good luck
Re: Try Hard reset....
Dubi said:
Just try to Hard reset .. Good luck
Click to expand...
Click to collapse
Already did the hard reset (many times) and nothing changed.
The problem started after the radio update, and the hard reset does not reset that update (I see the new version on startup).
Unless there is a harder reset I can do, I suppose I will have to wait for the rom.
makes a grown man cry...
hey i own a jasjam and about a week ago i updated to WM6.1 ...i cant remember which one...
anyway, it worked and was very fast. I used wm6.1 for a week and loved it! It was perfect. Just a few minutes ago i clicked contacts and it said "Shortcut not found" or something and the phone froze.
I pulled out the battery and put it back in and tried to boot it up. but everytime i turn it on it freezes at the HTC booting screen...how do i fix this?
thanks, Greg
you try clean reset?
also try to reflash ROM again
1) Hard Reset
if that fails
2) Boot into bootloader mode and reflash the rom.
n00b
kingsizeriz said:
1) Hard Reset
if that fails
2) Boot into bootloader mode and reflash the rom.
Click to expand...
Click to collapse
ok cool,how do i do the above?
im not sure what the jasjam is (different names here) however look in the section that corresponds to your device and there should be guides in there.
after installing a rom update my diamond reboots before windows mobile even appears. I see HTC diamond, seconds pass....vibrate....reboot.
is there anyway to break the cycle....i hope i haven't bricked it.....
please help..... i dont want a $280 crime deterrent device
I had this same problem when I flashed to 1.93, i got pissed and just set my phone aside and let it do its thing then it eventually booted up after like 10 minutes of rebooting. but now my phone is even more messed up because now my phone is not even picking up my t mobile network signal, so ya 1.93 does have some big problems, well at least to me it did. so now im looking to take my phone back to HTC for repairs as I have tried everything I could have myself.
Hard Reset
My friend had the same problem... He let it reboot for a while, ventually i it paused the rebooting and he had the chance to do a har reset. Has been running smoothe ever since.
Remember to do a hard reset everytime you install a new rom...
hello,
i solved this problem by going to bootloader-modus and flash it
with an other rom.
my problem was that i used my own cooked rom by cooking again ...
okokur
Guys I need your help..
3 days ago I upgrade my ROM from VIC ROM to DIB ROM but now my diamond goes weird...
If I soft reset the device it became a hard reset..Or if my diamond more than 7-8 hours standby it suddenly "hang" and if I soft reset then became a hard reset again...I think it's because a new ROM then I change to my old ROM (that before it's normal), but I didn't see any different, my diamond keep hard reset and hang..
Any one have suggestion or solution?What happening to my diamond?
Oh I almost forget same times if it hang and I soft reset the device it appears message like "Your device can't boot because it didn't turn off correctly or you install untrusted application..bla...bla.."
PLEASE HELP ME....
kumis_merah said:
Guys I need your help..
3 days ago I upgrade my ROM from VIC ROM to DIB ROM but now my diamond goes weird...
If I soft reset the device it became a hard reset..Or if my diamond more than 7-8 hours standby it suddenly "hang" and if I soft reset then became a hard reset again...I think it's because a new ROM then I change to my old ROM (that before it's normal), but I didn't see any different, my diamond keep hard reset and hang..
Any one have suggestion or solution?What happening to my diamond?
Oh I almost forget same times if it hang and I soft reset the device it appears message like "Your device can't boot because it didn't turn off correctly or you install untrusted application..bla...bla.."
PLEASE HELP ME....
Click to expand...
Click to collapse
Problem mimics this thread ......http://forum.xda-developers.com/showthread.php?t=490182.....might be caused by a bloated ROM
I had the same problem and for me this way works:
I flashed a new HardSPL (1.93 by Olinex)
Then made a Hard-Reset.
After the new HardSPL i installed the original 2.03 Rom from HTC
and made also a Hard-Reset.
Now my device works without any problems.
So I think, after my last step it is possible to install any cooked Rom,
but at the moment i don't know which one causes the crashes and it seems that a few others here have also problems so i will wait and see what happens in the next time...
(Im sorry for the English but I hope you can understand what I wants to say!)
After I installed tomtom navigator I got the message that blue tooth could not start because there was no memory for it. So I did a reset, but the problem is still there. I wanted to do a factory restart and thats were thing got wrong.
Somehow the device starts loading and stops after a couple of seconds turning of the screen an gets non responsive. I have to take the battery out and it will try again but fails to load wm6.
I tried to do a factory reset again but it wakes up and starts loading wm6. I can boot into ps format but is will freeze after a few seconds E-boot is the same problem stays there for a few sec and then starts loading wm6.
I think its trying to load a corrupted firmware image and lockup. I can not find the correct wm6 image anymore the links are dead the upgrade to wm6 topic old.
Please help me get my HP HX2790b running again.
Kind regards
Sebastian.
voyager2 said:
I can not find the correct wm6 image anymore the links are dead the upgrade to wm6 topic old.
Click to expand...
Click to collapse
Just look 9 threads lower and there's my thread with hx2000 series wm6.5 - try it. [here]
Thats so cool, I thought it was a dead forgotten device, I will give it a try hope I still can get in the bootloader. Thank you!
Did the update, but stil no joy, formating PS after update it hangs, wil not load WM, sceen light go's out end of story.
Update it now boots, something the do with the battery cover being of?