Blackberry Connect - Touch Pro2, Tilt 2 Windows Mobile General

Will Blackberry Connect work on the Touch Pro2?
I have installed version 106 and no luck as yet with t-mobile., stiil pending.
I just put the blackberry service on the phone and they said give it another day to activate the service.
Any help/suggestions would be appreciated.

i have been stuck on this issue for a week... no luck...
wrote to htc and they came back saying that look for updates on its site... now that's a really long shot..
would suggest that you too write to them... lets put some pressure..
this is a business phone according to them... then bberry is as much important!

I havent bought this phone yet, but I would only be able to if bbconnect is working.
Could you try to change the device ID to TouchPRO in settings/system/about and change the registry HLM\System\Versions\Aku to .1.6.0
But you need to change it BEFORE you install BBConnect
Please indicate if this makes any difference, otherwise we'll need to wait for a new bbconnect version

When i had installed the software without the above settings, i had a PIN and IP address - but it would not connect.
Later on i had hard reset the phone...
now i re-installed the software with the settings u mentioned, but i do not have a PIN or IP Address and bbconnect will not register either...
could u please tell me how to un-install it safely too? as i do not want to do another hard-reset now!
(btw, i had done a hard reset on the phone earlier coz after i tried 106 and uninstalled it, i installed a previous version 100 and it hung my phone.... )

peebee01 said:
I havent bought this phone yet, but I would only be able to if bbconnect is working.
Could you try to change the device ID to TouchPRO in settings/system/about and change the registry HLM\System\Versions\Aku to .1.6.0
But you need to change it BEFORE you install BBConnect
Please indicate if this makes any difference, otherwise we'll need to wait for a new bbconnect version
Click to expand...
Click to collapse
Thanks..I just unstalled and tried your settings still no connection or PIN.

am sure htc engineers visit these pages too....
hope u guys understand.. that u r touting the tp2 as a business phone.. and we need blackberry too in a business phone to complete the package....
we cannot connect to exchange alone (that incurs data charges and is not roaming friendly - especially international).. we need bberry coz that keeps us mobile from country to country that we visit...
common guys... its just a few lines of code u hv to modify... am sure...

Hi,
Have you tried this?
See WM65 solution here:
http://forum.xda-developers.com/showthread.php?t=502623
I think you have to play with the version number of your WM...
In case of WM61
I used this:
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Br,
Zsocee

I'm an Aussie wanting to purchase a Rhodium...
I'm upgrading from a 7100G blackberry handset. (yup a massive upgrade). Although the most critical part of my phone... (apart from making phone calls) is my blackberry push e-mail...
I can't afford to change over phones until I know that the Blackberry Connect 4.0 works. I know that HTC have a special version of the Blackberry Connect for the Diamond, the Touch Pro ect...
http://www.htc.com/sea/SupportViewNews.aspx?dl_id=497&news_id=61
With Windows 6.5 rumoured to be released within the next month I'm speculating that we won't see Blackberry Connect 4.0 working on the windows mobile 6.1

Zsocee said:
Hi,
Have you tried this?
See WM65 solution here:
http://forum.xda-developers.com/showthread.php?t=502623
I think you have to play with the version number of your WM...
In case of WM61
I used this:
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Br,
Zsocee
Click to expand...
Click to collapse
nope... non of these solutions will work.. tried all of them... even faced a few hard-resets trying older versions of bbconnect.
we have to wait for the next release. hmm....

mirage22 said:
nope... non of these solutions will work.. tried all of them... even faced a few hard-resets trying older versions of bbconnect.
we have to wait for the next release. hmm....
Click to expand...
Click to collapse
Me too!! Not working.
Had T-mobile and Rim on the phone together with no luck.

Well I contacted HTC to find out when it would work and this was the reply I received:
Since Windows Mobile is our platform for the HTC handsets, we would push customers to use the Microsoft exchange server.
The device comes with microsoft exchange server support and also supports IMAP and POP3 accounts.
HTC is not going to release any Blackberry connect applications and it would not up to HTC to do this. If Blackberry wants to develop an application and release it to HTC, you may need to check with RIM/BB.
RIM (is the company name)
Blackberry is the platform
Hope this information helps.
Sounds like the person I was contacted by either has no idea or there's no plan for blackberry connect to work on the touch pro 2.... Oh well looks like I'll have to purchase a storm...

Just be patient...
I'm more than sure that we will get BBC to work the same way we did it before. By manipulating the Device-ID string in the ROM (from HTC-Rhodium to whatever) BBC should recognize the device as "allowed" and it _should_ work. So all we have to do is to wait for the HardSPL-guys getting it done so that we can flash custom ROMs. Once this is done, I assume we will have BBC up and running.

Blackberry Connect.
Blackberry Connect does not work on the device, however, it seems to work on the HD.

From Sems.org
Has anyone tried this?
from http://www.sems.org/entry.asp?entry_id=338#IDComment31926819
Paul
Report Reply 1 reply · active 2 weeks ago
0 Vote up Vote down AirwolfUK · 2 weeks ago
make sure your AKU is set to .1.6.3. I have bbc .106 working fine on my touch pro2 with this and the SetModelID solution
Report Reply
I am planning on upgrading from Fuze to Fortress (TP2) and want to see if this works. You need to make sure your account is provisioned for BBConnect service.

Didn't work for me even after switching system ID to identify as Raphael, on T-Mobile US.

It works fine on the Rhodium. Check out the thread entitled "blackberry connect, not yet working" It got working about halway through. I use BBC on mine but I needed to make a couple of tweaks as outlined in that thread.

Dominoid - Rhodium - Blackberry connect
very interested in your asnwer dominoid.....can you send us more specifics as to how / what / where. We are dying to get Rhodium work with BBErry Connect. Which version worked with yours?

Does anyone know the orignal AKU for the ATT Tilt2?

I hate cross posting in threads, but somehow people decided to open different threads on the same topic. (Maybe a mod can merge them into one if he reads this).
Read more for a final solution without using SetModelID and starting and stoping services each time:
http://forum.xda-developers.com/showpost.php?p=4782317&postcount=163
Direct Link to the HowTo: http://www.silentservices.de/HexEdit-ROM-for-BBC.html

BBC
Works excellanty on my TP2 on Vodafone India Delhi n/w
follow steps on this forum
http://forum.xda-developers.com/showthread.php?p=5123157#post5123157:o

Related

Blackberry and XDA IIs - Could be Mar-Apr 05

Spoke to 02 Blackberry Support this morning regarding a few issues with the XDA IIs.
Due to current list of bugs (ie, bluetooth etc) Blackberry is quite low on the list to be including in a Rom update. He felt that it would be Mar-Apr 05 before such a update is released!
It seems that even they are directing people to www.smartner.com to try there solution out rather than have to wait!
I think Smartner could be onto a winner here!!!!!
Pylon Anywhere is a better and cheaper product than Smartner's.
You can download an eval from www.ianywhere.com/products/pylon_anywhere.html
Anonymous said:
Spoke to 02 Blackberry Support this morning regarding a few issues with the XDA IIs.
Due to current list of bugs (ie, bluetooth etc) Blackberry is quite low on the list to be including in a Rom update. He felt that it would be Mar-Apr 05 before such a update is released!
It seems that even they are directing people to www.smartner.com to try there solution out rather than have to wait!
I think Smartner could be onto a winner here!!!!!
Click to expand...
Click to collapse
Cheers for the update!
I mailed O2 data support last night so it'll be interesting to see what they tell me.
What I really find peculiar is although they are directing people to smartner, and the smartner website lists O2 as a partner, why aren't O2 listing Smartner as a service offering?
I'm going to check out the other product offered here, but between xmail and smartner, I've pretty much got my "push" (really pull) mail solutions sorted out for a few months.
Nighthawk said:
Pylon Anywhere is a better and cheaper product than Smartner's.
You can download an eval from www.ianywhere.com/products/pylon_anywhere.html
Click to expand...
Click to collapse
With Smartner's product, it is simply software for your PPC, which is configured via an web based interface at their end. Priced at $50 per year is pretty reasonable for push email.
How much does Pylon Anywhere cost ? Have looked at their website, but it's not exactly clear. Also I get the impression that users also need to install a 'server' type client - is this correct ?
Cheers
Mark
I'm downloading it now and it is a server based installation, so if its for your work you would have to get your IS department to test and certify the software before deployment. Looking at the site its restricted to Exchange/Domino environments only so those of you with Pop3 or Imap access are out of the picture.
LIke I say, i've got a test exchange environment at home so I'll configure onto that and see how it performs, but I doubt its for the end-user.
Hmmmm, I think at $645.00 for the Pylon software, I'll stick with Smartner for time being!!!!! WOW - I have picked myself back up off the floor now!!!! :shock:
Remember, thats not counting the price of the software to run the mailserver as well as the time taken to learn how to configure it.
Pylon Anywhere is a server and client solution, not a hosted service like you mention ($50 per person). You need your own server, just like Blackberry Enterprise.
For the price, you get five users (buy in bundles of five users). This includes the server software and client software for Pocket PC, Smartphone, Palm, Symbian and even desktop XP and more.
The client software installs on your device USING THE DEVICES APPS, not some custom solution, allowing you to use any application available for the Pocket PC (PI/AF for example). It is TRUE push; I can push calendar, mail, contacts, tasks and memos if I choose to (only do calendar and mail). You can then also setup what's called ReadySync sessions that occur at scheduled itervals that sync everything (you select) that you don't want pushed (in our case contacts, memos and tasks).
You can also manually sync your device. It also supports SMS Push for those who like having this service (SMS triggers your device to sync - sound familiar).
Fully encrypted, from end-to-end. Users can install the solution themselves via a web interface system, it also provides access to all their e-mail etc (like OWA) if wanted (can be disabled). User can also install via a CAB file and full install program as well.
You can say what e-mails to push and what not to, like HIGH PRIORITY only etc. You can sync your GAL or portions (filtered) of it.
What else do you want to know?
Dave
As i understand it you can use the blackberry client from the extended rom of the XDA II. You could either add it to your extended rom , or simply run it as a cab file.
Where can I get the cab?
z0mbi....where can I download the cab file for Blackberry Connect?
Thanks
Same questions here.....where can we get the cab file????
And do we have proof this works???
Blackberry CAB file
I have BB Connect working on an XDA II succsessfully, Although we now have an XDAIIs i want to get it going on. So can someone please post the CAB file or tell me how i can extract it from the XDAII ext rom pleeease
Shannon
Desparately seeking the Blackberry CAB
Somebody please help us all!
I have it going on my XDA2 and have extracted the cab and tried it on my PDA2K I-mate .
It installs ok but wont work
I have also got it from the MDA III german version this also installs and runs but RIM detects it as a illegal pin. There must be some sort of checking that it is in the correct rom version.
If i knew german i would be right
Looks like we just have to wait for a english rom with it installed .
Pole99
The CAB
Apologies for the no reply, I forgot to check back on this thread...
I haven't tested this personaly as I don't own a 2s but it works on my SE'd II
Anyhow please find the attached cab
Thanks... do you have the Desktop configuration tool sw?
Thanks so much for sending this along... Still trying to get it working.... looks like it also requires some desktop-based software.
Would you mind posting?
Thanks in advance!!!
BLACKBERRY XDA IIS
Hey Guys,
Thanks for the Cab file really apprecicate it ... next question, I have got it installed alright however when it is running, active sync does not work . So has anyone actually got it to work on the XDA IIS?
Maybe i need a newer rom for the XDAIIS although i think there is only the launch going round ?
Shannon
I installed it but it screwed up my blue angel - it had the memory errors (i.e. no more memory available to run programs), so I tried to uninstall it but could not - hard reset after that
It installed on my Verizon Harrier, but it doesn't register... It's possible that I need to have a Blackberry account, so I'm going to call them tomorrow to see.
You might not need a blackberry account from your provider to make this work, you probably just need an account on any BES

TMO BB Connect for Wizard also works on Universal!

I successfully installed and configured the recently published BB Connect program onto my Universal. T-Mobil Germany officially came out with the BB Connect add-on a few days back, and it turns out it actually is dual-platform-aware, Wizard and Universal.
It can be downloaded at ftp://xda:[email protected]/Uploads/HTC_Wizard/BB Connect/mdavario_sw_bb_03-2006.zip
There is one *but* though. Until now, I only got it to work on TMO-UKs 1.20 MDA PRO ROM, but my suspicion is that it actually has something to do with the radio version. BB Connect works flawlessly on radio versions 1.06 and below (I saw similar behaviour on the Blue Angel devices where radio versions beyond 1.13 could not made to work with BB Connect).
Anyway, although initially I could not get it to work with the Jasjar 1.20 rom, I must say I did use the 1.09 radio. I will be re-installing the Jasjar rom later today, this time with radio version 1.06 and report back on the results.
(While I was writing this, I heard my "T-Mobilized O2 XDA Exec" happily signalling the arrival of new mail )
BB Connect working on MDA Pro
I can confirm that the BB Connect Client from the Wizard is working on my Universal.
It seems also correct that you have to have the t-mobile ROM installed. I tried it with the latest I-Mate ROM but it failed to connect after the initial setup. I then installed the lastest t-mobile ROM and now BB Connect is working like a charm...
Great stuff!!!
Cheers
version no
Wiz,
Kindly advise what version is your latest t-mobile rom.
Thanks & Regards
The combination that works is TMO UK 1.20 (or lower) and radio 1.06 (or lower)
Other versions (Qtek, Imate) work as well, as long as they are AKU1 and *not* AKU2
I can confirm that it DOESNT work on O2 Rom with radio 1.06, with VF Account and DE TMOB BB.. I will try to do the tmob rom update in the next couple of days...
will the tmob rom and bb client work ok with a VF account??
tonyb15re said:
...will the tmob rom and bb client work ok with a VF account??
Click to expand...
Click to collapse
We have a BB Enterprise subscription and a BES at our central location. Our provider is VF Germany. I dont know if you can use BB with VF-Push but I _asume_ that it will work.
took the leap this morning as it appears the rom has other useful things in like an updated BT stack for BT Caller ID Etc..
Bottom line is it all dropped in ok, have BB coming down from our BES, bizarre thing is though the from address is shown as an exchange address and not email, and I cant reply as yet.. maybe something on our BES server needs tweaking..
Anyone know how to remove the Tmob links on the Home Screen? I've changed the theme back to Windows Default for the time being but would like to remove some of the Today ICONS that TMob stick on there..
Wiz said:
I successfully installed and configured the recently published BB Connect program onto my Universal. T-Mobil Germany officially came out with the BB Connect add-on a few days back, and it turns out it actually is dual-platform-aware, Wizard and Universal.
It can be downloaded at ftp://xda:[email protected]/Uploads/HTC_Wizard/BB Connect/mdavario_sw_bb_03-2006.zip
There is one *but* though. Until now, I only got it to work on TMO-UKs 1.20 MDA PRO ROM, but my suspicion is that it actually has something to do with the radio version. BB Connect works flawlessly on radio versions 1.06 and below (I saw similar behaviour on the Blue Angel devices where radio versions beyond 1.13 could not made to work with BB Connect).
Anyway, although initially I could not get it to work with the Jasjar 1.20 rom, I must say I did use the 1.09 radio. I will be re-installing the Jasjar rom later today, this time with radio version 1.06 and report back on the results.
(While I was writing this, I heard my "T-Mobilized O2 XDA Exec" happily signalling the arrival of new mail )
Click to expand...
Click to collapse
Download link not working, can u please upload the same here.
Cheer, Taurus
get from the source
https://after-sales-service.t-mobile.de/eg_online/t-mobile/t_mda_vario.htm
Some N00B questions:
1) How do I tell if I am on AKU1 or AKU2
2) How do I find the older ROM.
THX,
JAB
Answered my 2nd question: ftp://ftp.clubimate.com
ISA Server: extended error message :
Hi, I can not get the zip file when I click on the link.
It can be downloaded at ftp://xda:[email protected]/Uploads/HTC_Wizard/BB Connect/mdavario_sw_bb_03-2006.zip
ISA Server: extended error message :
200 Switching to Binary mode.
200 PORT command successful. Consider using PASV.
550 Failed to open file.
Please advice
Not working on T-Mobile MDA Pro German
Hi tried this, but I cannot get it to connect to the BB server. The software lists IMEI and BB PIN. It seems to connect for one or two seconds (for that time, I see an IP address in the status window), but after that, it disconnects and stays that way.
I phoned T-Mobile MMS (Multimedia Services) yesterday and asked them about it. To my surprise, they did not try to shake me off because I was using a Vario software with my Universal, but honestly tried to reproduce my problem - and succeeded in that.
They told me that the BB client for T-Mobile MDA Pro German should be released "early in April", gave me a EUR 10 Bonus on my bill and told me to watch their homepage for the software update. I'm quite satisfied with that
Wiz said:
I successfully installed and configured the recently published BB Connect program onto my Universal. T-Mobil Germany officially came out with the BB Connect add-on a few days back, and it turns out it actually is dual-platform-aware, Wizard and Universal.
It can be downloaded at ftp://xda:[email protected]/Uploads/HTC_Wizard/BB Connect/mdavario_sw_bb_03-2006.zip
There is one *but* though. Until now, I only got it to work on TMO-UKs 1.20 MDA PRO ROM, but my suspicion is that it actually has something to do with the radio version. BB Connect works flawlessly on radio versions 1.06 and below (I saw similar behaviour on the Blue Angel devices where radio versions beyond 1.13 could not made to work with BB Connect).
Anyway, although initially I could not get it to work with the Jasjar 1.20 rom, I must say I did use the 1.09 radio. I will be re-installing the Jasjar rom later today, this time with radio version 1.06 and report back on the results.
(While I was writing this, I heard my "T-Mobilized O2 XDA Exec" happily signalling the arrival of new mail )
Click to expand...
Click to collapse
Will this work for Any BB Enterprise server, Please clarify i wanted to get rid of the BB at the earliest & use my dopdo only
Cheers, Taurus
Works for me!!
It works for me... Radio Ver 1.09 o2 XDA exec... using it while roaming in Europe with T-Mobile USA Blackberry Intl Plan.. connects to both Instant Email and Enterprise. ... no probs... although it sucks compared to MS Direct Push... you need to switch APN's manually so that you can use PIE... also, it just feels like bloatware compared to the native push solution....i uninstalled it and continued using MS Direct Push...
Re: Works for me!!
alinefx said:
It works for me... Radio Ver 1.09 o2 XDA exec... using it while roaming in Europe with T-Mobile USA Blackberry Intl Plan.. connects to both Instant Email and Enterprise. ... no probs... although it sucks compared to MS Direct Push... you need to switch APN's manually so that you can use PIE... also, it just feels like bloatware compared to the native push solution....i uninstalled it and continued using MS Direct Push...
Click to expand...
Click to collapse
Could you, please, confirm which versions of ROM, RADIO and ExtROM you use ? The only combination i was able to runn BBCOnnect was T-Mobile ancient ROM 1.20.120. Others never worked.
Would someone please be kind enough to post the ftp link to the exact T-mobile rom that works with the BB connect software?
Never mind I got it all running but I get no messages, I can send them but I have not recieved any.......
I had to call T-Mobile, they reset my location data in their system and now my BB is working!
Next I am going to try to install the O2 ROM, I did a backup using Sprite Software 5.1 and will do a ROM upgrade from T-Mobile to O2 and see if the BB works with that....
I posted this over in the wizard forum and was wondering if this was actually the better place.
http://forum.xda-developers.com/viewtopic.php?p=307453#307453
jab said:
Need some help.
Running a Univeral with the base TMO Rom 1.13.53 WWE and radio 1.03.01. I am running on the Cingular network.
I have installed the BB Connect software. It connected the moment the BES admin added me to the BES network, since then it has not really worked properly.
In looking at the Initial window for BB connect titled "Instant Email - ", I see Lookup, Settings, Register Now, Suspend and Hide enabled. Email Setup is disabled.
Under the Settings button I see:
Identity - my pin, my IMEI and sometimes an IP address.
Under the Status tab I see
Service: Not Connected, Data Tunnel Available, Network Available at different times, but typically Not Connected. I also believe that I see an IP address when I the state is on Network Available on the Identity tab, but since I can't see both tabs at the same time, I am not 100% certain.
I also have the option to suspend, restart, and uninstall on this screen. And a couple of Suspend Options.
Under the Service List, I see:
Blackberry [ALP]
Blackberry [CMIME]
Both of the above services are active. The CMIME Service has some synchronization options available.
Under the IT Policy tab, I see:
One was created yesterday and the name is default
Options Tab:
Connection: Blackberry Solution. Under the details button, APN -- blackberry.net, Username = rim, Password =password, IP Address - 206.51.26.189, Remote Port - 19781, Local POrt = 19780
Pim Tab:
Option to Sync Calendar.
About Tab:
Blackberry Version : 2.1.1.20
Transport Version 2.1.0.44
ROM Version: 1.13
System Version: 227.214.54.234
Device Type: HTC-Universal
Thanks,
JAB
Click to expand...
Click to collapse
Many thanks to whomever can assist me with this.
JAB

Got bbconnect working!

Thanks a lot for this GREAT forum! Finally got blackberry connect working on my artemis! Downloaded v 4.0.0.92 from this forum last week, thought I'd give it a go. It's been a month since I tried all other versions 4.0.0.84 to 4.0.0.91. They ALL made me sick, had to restore a few times. I was amazed that it worked this time, and still works! I have my work mail coming in from BES, and also configured 3 other mail accounts (gmail, isp and my domain), works like a charm.
of course, thanks Meschle for the fantastic touch 3.01 rom!
cubist, what radio are you using?
how did you manage to get the BES to work? Is there any trick or magic?
Radio 3.07.90, which comes with touch 3.01, no alterations made to registry, like some suggested in other posts for older versions of bbconnect.
Once you manage to get connected, setup personal mail through secure blackberry browsing. Create a login here too for web access, so you can resend service books when needed! Once that is all ok, you should get autoconnected to blackberry over edge. My plan is paid by my company, and we have a bes server with lotus notes. I called our dept to reactivate (they have to activate account with password on server, it works only for 48 hours) Then reactivated with password.
Cubist,
thanks a lot, mine is working as well. Just did as you proposed.
glad I could help you!
by chance, do you know what happens to re-activation after having flashed a new ROM? Do you need to go through the re-activation process again?
you can resend service books from the web. If you have the same radio and bbconnect can install on the rom, you should get connected. For the BES part, I'm not sure. I think the key used to register with the BEserver contains a device id, I'm not sure if that changes when installing another rom. I will know shortly: when touch with wm6.1 comes out, I'll test it.
Hi and wonder if you can help!
I am with O2 in the Uk - XDA Orbit WM6
Got BSoftware 4.0.0.92 and got 1 of my emails working okay, but when adding a 2nd one got the following error message:
Service Book Management
Device Message Store Limit.
You must delete a message store to use service.
example: [email protected]
Do you happen to know the way around this?
Many thanks....Carlos
Some providers only allow a certain amount of mailboxes to be added. Your BES account is the first, probably you can't add more than 1 account.
cubist said:
you can resend service books from the web. If you have the same radio and bbconnect can install on the rom, you should get connected. For the BES part, I'm not sure. I think the key used to register with the BEserver contains a device id, I'm not sure if that changes when installing another rom. I will know shortly: when touch with wm6.1 comes out, I'll test it.
Click to expand...
Click to collapse
cubist, did you finally upgrade to "Artemis Touch 4.01 WM6.1 WWE ROM, 5.2.19199 (Build 19199.1.0.0) (Full, Lite and Vanilla)" and does you BB account still work? I am keen to upgrade, but cannot afford to loose the BB functionality.

blackberry connect on htc hd

hi guys, does anybody knows if bbconnect works on hd
Tried version .103 last night - not yet working (i.e. no PIN) will investigate further with other versions when I have a little more time and report back - anyone else working on this with any success please share?
Thanks
Any luck making the HTC Touch HD work with BBC-Blackberry Connect (BES)? I am still stuck in "PIN pending" on my side whatever I do... Thanks for letting me know.
Otherwise, the HTC Touch HD is definitely the best HTC device I have used since converting from Blackberry; I would hate to have to go back to BB devices, even though the Storm seems to be a giant step up (but no Sling player, no Kinoma Player, etc.).
28Wagram (A Frenchman lost in the US for the last 10 years...)
obviously i am having the same result as you guys trying to use version .100 This version worked on my touch pro. going to try a few version and see what i can get accomplished here
Versions Confirmed NOT working:
.103
.100
.92
.91
.90
.84
.67
These are the only versions I can find so I can say its a no go for now.
Did you try changing registry setting (HKLM\System\Versions Aku set to for example .0.4.2?
JMes said:
Did you try changing registry setting (HKLM\System\Versions Aku set to for example .0.4.2?
Click to expand...
Click to collapse
no
I took your advice, changed it and soft reset. I then installed version .103 and PIN still reads pending. What version would you recommend for this setting? I dont want to go through them all again haha. I also tried th eone that worked on my touch pro (.100) and still no PIN.
I would not know what to recommend. My previous suggestion came from my experience with the TyTn II but I suppose the value to use is device dependant. Maybe another user can help us on this
I hope that you succeed because my decsion to the Touch HD depends on whether one can install Blackberry Connect.
Please let us know if you manage to make it run.
I have a corporate Vodafone BES blackberry account - have bbconnect .103 install - had NO PIN for days but .... my PIN has finally arrived - seems Vodafone have added the HD to the supported devices list!!!!!!
.
BB Connect
version .103 was stopped after 5 minutes. I had PIN and everything, now I have nothing , no connection no PIN
Same here in the US, on AT&T/Cingular, with BBC .103. Five minutes of heaven, PIN out, connection, and then... nothing - No connection any longer. Keeping my fingers crossed...
Guys , any news on this topic? It would be nice to share your success with us! Thanks, Thorsten
i still havent had any luck. i am monitoring his thread which seems to have good info but they are still stuck as well
http://www.sems.org/entry.asp?ENTRY_ID=276
mallman said:
i still havent had any luck. i am monitoring his thread which seems to have good info but they are still stuck as well
http://www.sems.org/entry.asp?ENTRY_ID=276
Click to expand...
Click to collapse
Pulled this from Sems website -
Hi
Just to confirm
BB Connect Version .103 is working on my HTC Touch HD !!!!
This is cool
Posted by Piotr on 11/15/2008 @ 7:38 AM
version .103 on Touch HD is no longer working . I had PIN was in a middle of synchronization and connection was stopped , i don't know why
Posted by Piotr on 11/15/2008 @ 10:26 AM
Click to expand...
Click to collapse
Seems like were all in the same boat - I'm checking daily for updates - I think we'll have to wait for RIM to issue a new version of bbconnect (maybe a .105 version) as they did with the Pro before we see this working properly.
If anyone else has any updates or thoughts then let us know!
.
Status
So I've got Touch HD on Vodafone UK and installed Blackberry Connect v 4.0.0.103.
Seems to have registered with the network as I have a pin code but struggling to get services activated with company BES.
Try to connect to Desktop Software (v4.0.0.22) but get a cannot connect to device error code.
Saw someone posted success with a Vodafone UK SIM - could you post the specific versions of desktop software et al and whether you were connecting to a company BES?
Feel like I'm a step or 2 away from a perfect phone
Thanks,
John.
but for the specification they mentioned about they don't have Blackberry support, right?
I'm also following this thread HERE apparently theres a version 1.0.0.104 about but I'm sceptical - lets see?
If anyone else comes accross the .104 version on their travels (searches) then please share!
.
Blob8me said:
I'm also following this thread HERE apparently theres a version 1.0.0104 about but I'm sceptical - lets see?
If anyone else comes accross the .104 version on their travels (searches) then please share!
.
Click to expand...
Click to collapse
i will keep my eyes peeled. Did a few searches and didnt come up with anything but hopefully you are correct
I have found .104 however it does not work sames issues are present. Looks like operator specific release
tarkanuk said:
I have found .104 however it does not work sames issues are present. Looks like operator specific release
Click to expand...
Click to collapse
where did you find .104 - can you share this either by url address or the .cab itself despite your continued problems please so I can take a look too please?????
Thanks.
.
Found the link to .104 >>HERE<<
I'll test later but if others have success then please share..... I'm on Vodafone UK (Blackberry BES Service) by the way......
UPDATE: Installed - indeed its .104 but alas as per tarkanuk still no PIN..... we'll have to wait a little longer it seems.....!
Keep trying guys.....
.

blackberry Messenger How?

Hi,
Have they got any way using blackberry messenger with x1?
thanks.
BBM needs the device to have a PIN.....and as of right now the current BB connect does not provide that. I do not see it in the foreseeable future as BBM is part of RIMs unique features on blackberries
akay_7 said:
BBM needs the device to have a PIN.....and as of right now the current BB connect does not provide that. I do not see it in the foreseeable future as BBM is part of RIMs unique features on blackberries
Click to expand...
Click to collapse
Well, I manage to install blackberry application on HTC HD and it's working. I guess it should work on X1 too since it is HTC hardware.
PIN that is inside blackberry mobile is provided inside blackberry software for windows mobile.
ffroms said:
Well, I manage to install blackberry application on HTC HD and it's working. I guess it should work on X1 too since it is HTC hardware.
PIN that is inside blackberry mobile is provided inside blackberry software for windows mobile.
Click to expand...
Click to collapse
There is a dedicated BB Connect app for the xperia also, but the problem is that winmo devices wont be able to acquire a PIN as they belong to individual BB devices.
with the HTC HD nd Xperia app you only have access to the BB email servers
akay_7 said:
There is a dedicated BB Connect app for the xperia also, but the problem is that winmo devices wont be able to acquire a PIN as they belong to individual BB devices.
with the HTC HD nd Xperia app you only have access to the BB email servers
Click to expand...
Click to collapse
That's not true man, BB Connect acquires PIN for your WM device as well so i have no idea why there is such a problem to get the BB messenger to work... Probably marketing strategy?
Can be used with Iphone or anything?
bbm help
snooffy said:
That's not true man, BB Connect acquires PIN for your WM device as well so i have no idea why there is such a problem to get the BB messenger to work... Probably marketing strategy?
Click to expand...
Click to collapse
yo man plz tell me how you did it kuz all my friends habe blackberries but i like windows and it would be so much easier for me if used bbm to talk 2 them. thank you
I have a HTC HD runing the blackberry service and to be able to get the messenger service as well would really finish things off. Has anyone seen an app that does that?
snooffy said:
That's not true man, BB Connect acquires PIN for your WM device as well so i have no idea why there is such a problem to get the BB messenger to work... Probably marketing strategy?
Click to expand...
Click to collapse
yea i stand corrected, ur definitely right. BBM is one of the main selling points(i constantly hear bb users boast about how bbm is the best messenger app). By making BBM available to WM devices, there isnt really a point in owning a blackberry device. This is why they probably scrapped the blackberry application suite project.
i've tried the bb connect for xperia,bt it wont connect...it says bb pinending and the isp wont connect...something like that...i think we need to register to our carrier's b;ackberry plan to be able to get this working bcoz,once u run the app, it connects to the internet by blackberry service not wifi...
this is not possible ..
Windows mobile devices don't have " PIN "
To clear things up, to use blackberry messenger you must have a blackberry in the 1st place to get a BB Pin! Only then can you use BBM. also i believe you need a BB service plan for the BB services to be free but i could be wrong
Jonny4911 said:
To clear things up, to use blackberry messenger you must have a blackberry in the 1st place to get a BB Pin! Only then can you use BBM. also i believe you need a BB service plan for the BB services to be free but i could be wrong
Click to expand...
Click to collapse
if that so,SE wouldnt have to bother to make an official app bbconnect for xperia,if we hv to switch to BB to use their BB messenger!
PIN etc.
I've got an xperia with BBconnect on and of course asigned PIN. You won't get your mails without a PIN. BB connect works on just few WM devices - xperia, HTC-Raphael etc... It checks your device ID and if you don't have the correct one, or you don't have BB tariff - there is always "Pending" instead of your PIN. No wonder RIM is not making BB suite even their new products are quite cool (9700) but a BB won't ever be that customizable as a WM device. That's a bit shame as people with BB are limited to people with BB. I don't think this is just marketing, that's something to do with RIM security and that is on very high level, therefore they don't want to risk running their appz on a ambiguous unsafe system like WM
I don't care, i have my BB connect with mails as a must from work on my x1 as i did not want a BB. If I did not have to have it i would use MS direct push or just check for mails every 30minutes...
I have searched high and low for ages now and certain people state that BlackBerry messenger will work on the SEx1 and other say it simply not possible. I'm not the most experienced user with the X1, I don't have any custom ROM running (simply don't now how to run one!!). Is anyone able to clear this up for me?? Is it possible to get the BB messenger running on the X1? Do I need any custom ROM? HEEELP??
Further to this I have tried downloading and installing the blackberry app that 'supposed' to work on X1 but each time I try and install I get a message stating something about an 'OEM' I think it was, WTF is this?
Hi,
I've been using BB Connect on X1 for 6 months. I have the official polish ROM updated with SE Update Service.
br,
Tomasz
dabrowsk said:
Hi,
I've been using BB Connect on X1 for 6 months. I have the official polish ROM updated with SE Update Service.
br,
Tomasz
Click to expand...
Click to collapse
Would you like to explain how you have this working? Keep in mind I have the standard ROM that came with the device.
cheeseymofodude said:
Would you like to explain how you have this working? Keep in mind I have the standard ROM that came with the device.
Click to expand...
Click to collapse
Well,
I know that it is important to have the last version of SE X1 ROM, it didn't work for me with previous ROM. After installation of BB Connect, on BB Settings on tab 'activation' I put my email address and special password set by our company's mail administrator on the server.
I don't know what can I tell you more.... For sure after installation you need to restart the system.
Tell me how it looks like on your X1, does it connect to Black Berry net through 3G or GPRS?
Tomasz
dabrowsk said:
Well,
I know that it is important to have the last version of SE X1 ROM, it didn't work for me with previous ROM. After installation of BB Connect, on BB Settings on tab 'activation' I put my email address and special password set by our company's mail administrator on the server.
I don't know what can I tell you more.... For sure after installation you need to restart the system.
Tell me how it looks like on your X1, does it connect to Black Berry net through 3G or GPRS?
Tomasz
Click to expand...
Click to collapse
in the installation guide it states to install, go to settings, hit 'register to network'. when i do this i get the pop up indicating my device is trying to connect to 'blackberry' through either gprs or hdspa useualy. it states in the guide that once this is done i should have the option to select 'email setup' but as i dont get this im assuming the device has not registered. under 'status' the 'PIN' reads pending. help??
cheeseymofodude said:
in the installation guide it states to install, go to settings, hit 'register to network'. when i do this i get the pop up indicating my device is trying to connect to 'blackberry' through either gprs or hdspa useualy. it states in the guide that once this is done i should have the option to select 'email setup' but as i dont get this im assuming the device has not registered. under 'status' the 'PIN' reads pending. help??
Click to expand...
Click to collapse
Hmm, I had the same situation before updating my ROM - there was an information 'PIN pending'.... but after update it is ok.... so I'm not sure if I can help you. BTW I did the same configuration for 2 of my collegues and in both cases after update everything worked.

Categories

Resources