Related
Spoke to 02 Blackberry Support this morning regarding a few issues with the XDA IIs.
Due to current list of bugs (ie, bluetooth etc) Blackberry is quite low on the list to be including in a Rom update. He felt that it would be Mar-Apr 05 before such a update is released!
It seems that even they are directing people to www.smartner.com to try there solution out rather than have to wait!
I think Smartner could be onto a winner here!!!!!
Pylon Anywhere is a better and cheaper product than Smartner's.
You can download an eval from www.ianywhere.com/products/pylon_anywhere.html
Anonymous said:
Spoke to 02 Blackberry Support this morning regarding a few issues with the XDA IIs.
Due to current list of bugs (ie, bluetooth etc) Blackberry is quite low on the list to be including in a Rom update. He felt that it would be Mar-Apr 05 before such a update is released!
It seems that even they are directing people to www.smartner.com to try there solution out rather than have to wait!
I think Smartner could be onto a winner here!!!!!
Click to expand...
Click to collapse
Cheers for the update!
I mailed O2 data support last night so it'll be interesting to see what they tell me.
What I really find peculiar is although they are directing people to smartner, and the smartner website lists O2 as a partner, why aren't O2 listing Smartner as a service offering?
I'm going to check out the other product offered here, but between xmail and smartner, I've pretty much got my "push" (really pull) mail solutions sorted out for a few months.
Nighthawk said:
Pylon Anywhere is a better and cheaper product than Smartner's.
You can download an eval from www.ianywhere.com/products/pylon_anywhere.html
Click to expand...
Click to collapse
With Smartner's product, it is simply software for your PPC, which is configured via an web based interface at their end. Priced at $50 per year is pretty reasonable for push email.
How much does Pylon Anywhere cost ? Have looked at their website, but it's not exactly clear. Also I get the impression that users also need to install a 'server' type client - is this correct ?
Cheers
Mark
I'm downloading it now and it is a server based installation, so if its for your work you would have to get your IS department to test and certify the software before deployment. Looking at the site its restricted to Exchange/Domino environments only so those of you with Pop3 or Imap access are out of the picture.
LIke I say, i've got a test exchange environment at home so I'll configure onto that and see how it performs, but I doubt its for the end-user.
Hmmmm, I think at $645.00 for the Pylon software, I'll stick with Smartner for time being!!!!! WOW - I have picked myself back up off the floor now!!!! :shock:
Remember, thats not counting the price of the software to run the mailserver as well as the time taken to learn how to configure it.
Pylon Anywhere is a server and client solution, not a hosted service like you mention ($50 per person). You need your own server, just like Blackberry Enterprise.
For the price, you get five users (buy in bundles of five users). This includes the server software and client software for Pocket PC, Smartphone, Palm, Symbian and even desktop XP and more.
The client software installs on your device USING THE DEVICES APPS, not some custom solution, allowing you to use any application available for the Pocket PC (PI/AF for example). It is TRUE push; I can push calendar, mail, contacts, tasks and memos if I choose to (only do calendar and mail). You can then also setup what's called ReadySync sessions that occur at scheduled itervals that sync everything (you select) that you don't want pushed (in our case contacts, memos and tasks).
You can also manually sync your device. It also supports SMS Push for those who like having this service (SMS triggers your device to sync - sound familiar).
Fully encrypted, from end-to-end. Users can install the solution themselves via a web interface system, it also provides access to all their e-mail etc (like OWA) if wanted (can be disabled). User can also install via a CAB file and full install program as well.
You can say what e-mails to push and what not to, like HIGH PRIORITY only etc. You can sync your GAL or portions (filtered) of it.
What else do you want to know?
Dave
As i understand it you can use the blackberry client from the extended rom of the XDA II. You could either add it to your extended rom , or simply run it as a cab file.
Where can I get the cab?
z0mbi....where can I download the cab file for Blackberry Connect?
Thanks
Same questions here.....where can we get the cab file????
And do we have proof this works???
Blackberry CAB file
I have BB Connect working on an XDA II succsessfully, Although we now have an XDAIIs i want to get it going on. So can someone please post the CAB file or tell me how i can extract it from the XDAII ext rom pleeease
Shannon
Desparately seeking the Blackberry CAB
Somebody please help us all!
I have it going on my XDA2 and have extracted the cab and tried it on my PDA2K I-mate .
It installs ok but wont work
I have also got it from the MDA III german version this also installs and runs but RIM detects it as a illegal pin. There must be some sort of checking that it is in the correct rom version.
If i knew german i would be right
Looks like we just have to wait for a english rom with it installed .
Pole99
The CAB
Apologies for the no reply, I forgot to check back on this thread...
I haven't tested this personaly as I don't own a 2s but it works on my SE'd II
Anyhow please find the attached cab
Thanks... do you have the Desktop configuration tool sw?
Thanks so much for sending this along... Still trying to get it working.... looks like it also requires some desktop-based software.
Would you mind posting?
Thanks in advance!!!
BLACKBERRY XDA IIS
Hey Guys,
Thanks for the Cab file really apprecicate it ... next question, I have got it installed alright however when it is running, active sync does not work . So has anyone actually got it to work on the XDA IIS?
Maybe i need a newer rom for the XDAIIS although i think there is only the launch going round ?
Shannon
I installed it but it screwed up my blue angel - it had the memory errors (i.e. no more memory available to run programs), so I tried to uninstall it but could not - hard reset after that
It installed on my Verizon Harrier, but it doesn't register... It's possible that I need to have a Blackberry account, so I'm going to call them tomorrow to see.
You might not need a blackberry account from your provider to make this work, you probably just need an account on any BES
I successfully installed and configured the recently published BB Connect program onto my Universal. T-Mobil Germany officially came out with the BB Connect add-on a few days back, and it turns out it actually is dual-platform-aware, Wizard and Universal.
It can be downloaded at ftp://xda:[email protected]/Uploads/HTC_Wizard/BB Connect/mdavario_sw_bb_03-2006.zip
There is one *but* though. Until now, I only got it to work on TMO-UKs 1.20 MDA PRO ROM, but my suspicion is that it actually has something to do with the radio version. BB Connect works flawlessly on radio versions 1.06 and below (I saw similar behaviour on the Blue Angel devices where radio versions beyond 1.13 could not made to work with BB Connect).
Anyway, although initially I could not get it to work with the Jasjar 1.20 rom, I must say I did use the 1.09 radio. I will be re-installing the Jasjar rom later today, this time with radio version 1.06 and report back on the results.
(While I was writing this, I heard my "T-Mobilized O2 XDA Exec" happily signalling the arrival of new mail )
BB Connect working on MDA Pro
I can confirm that the BB Connect Client from the Wizard is working on my Universal.
It seems also correct that you have to have the t-mobile ROM installed. I tried it with the latest I-Mate ROM but it failed to connect after the initial setup. I then installed the lastest t-mobile ROM and now BB Connect is working like a charm...
Great stuff!!!
Cheers
version no
Wiz,
Kindly advise what version is your latest t-mobile rom.
Thanks & Regards
The combination that works is TMO UK 1.20 (or lower) and radio 1.06 (or lower)
Other versions (Qtek, Imate) work as well, as long as they are AKU1 and *not* AKU2
I can confirm that it DOESNT work on O2 Rom with radio 1.06, with VF Account and DE TMOB BB.. I will try to do the tmob rom update in the next couple of days...
will the tmob rom and bb client work ok with a VF account??
tonyb15re said:
...will the tmob rom and bb client work ok with a VF account??
Click to expand...
Click to collapse
We have a BB Enterprise subscription and a BES at our central location. Our provider is VF Germany. I dont know if you can use BB with VF-Push but I _asume_ that it will work.
took the leap this morning as it appears the rom has other useful things in like an updated BT stack for BT Caller ID Etc..
Bottom line is it all dropped in ok, have BB coming down from our BES, bizarre thing is though the from address is shown as an exchange address and not email, and I cant reply as yet.. maybe something on our BES server needs tweaking..
Anyone know how to remove the Tmob links on the Home Screen? I've changed the theme back to Windows Default for the time being but would like to remove some of the Today ICONS that TMob stick on there..
Wiz said:
I successfully installed and configured the recently published BB Connect program onto my Universal. T-Mobil Germany officially came out with the BB Connect add-on a few days back, and it turns out it actually is dual-platform-aware, Wizard and Universal.
It can be downloaded at ftp://xda:[email protected]/Uploads/HTC_Wizard/BB Connect/mdavario_sw_bb_03-2006.zip
There is one *but* though. Until now, I only got it to work on TMO-UKs 1.20 MDA PRO ROM, but my suspicion is that it actually has something to do with the radio version. BB Connect works flawlessly on radio versions 1.06 and below (I saw similar behaviour on the Blue Angel devices where radio versions beyond 1.13 could not made to work with BB Connect).
Anyway, although initially I could not get it to work with the Jasjar 1.20 rom, I must say I did use the 1.09 radio. I will be re-installing the Jasjar rom later today, this time with radio version 1.06 and report back on the results.
(While I was writing this, I heard my "T-Mobilized O2 XDA Exec" happily signalling the arrival of new mail )
Click to expand...
Click to collapse
Download link not working, can u please upload the same here.
Cheer, Taurus
get from the source
https://after-sales-service.t-mobile.de/eg_online/t-mobile/t_mda_vario.htm
Some N00B questions:
1) How do I tell if I am on AKU1 or AKU2
2) How do I find the older ROM.
THX,
JAB
Answered my 2nd question: ftp://ftp.clubimate.com
ISA Server: extended error message :
Hi, I can not get the zip file when I click on the link.
It can be downloaded at ftp://xda:[email protected]/Uploads/HTC_Wizard/BB Connect/mdavario_sw_bb_03-2006.zip
ISA Server: extended error message :
200 Switching to Binary mode.
200 PORT command successful. Consider using PASV.
550 Failed to open file.
Please advice
Not working on T-Mobile MDA Pro German
Hi tried this, but I cannot get it to connect to the BB server. The software lists IMEI and BB PIN. It seems to connect for one or two seconds (for that time, I see an IP address in the status window), but after that, it disconnects and stays that way.
I phoned T-Mobile MMS (Multimedia Services) yesterday and asked them about it. To my surprise, they did not try to shake me off because I was using a Vario software with my Universal, but honestly tried to reproduce my problem - and succeeded in that.
They told me that the BB client for T-Mobile MDA Pro German should be released "early in April", gave me a EUR 10 Bonus on my bill and told me to watch their homepage for the software update. I'm quite satisfied with that
Wiz said:
I successfully installed and configured the recently published BB Connect program onto my Universal. T-Mobil Germany officially came out with the BB Connect add-on a few days back, and it turns out it actually is dual-platform-aware, Wizard and Universal.
It can be downloaded at ftp://xda:[email protected]/Uploads/HTC_Wizard/BB Connect/mdavario_sw_bb_03-2006.zip
There is one *but* though. Until now, I only got it to work on TMO-UKs 1.20 MDA PRO ROM, but my suspicion is that it actually has something to do with the radio version. BB Connect works flawlessly on radio versions 1.06 and below (I saw similar behaviour on the Blue Angel devices where radio versions beyond 1.13 could not made to work with BB Connect).
Anyway, although initially I could not get it to work with the Jasjar 1.20 rom, I must say I did use the 1.09 radio. I will be re-installing the Jasjar rom later today, this time with radio version 1.06 and report back on the results.
(While I was writing this, I heard my "T-Mobilized O2 XDA Exec" happily signalling the arrival of new mail )
Click to expand...
Click to collapse
Will this work for Any BB Enterprise server, Please clarify i wanted to get rid of the BB at the earliest & use my dopdo only
Cheers, Taurus
Works for me!!
It works for me... Radio Ver 1.09 o2 XDA exec... using it while roaming in Europe with T-Mobile USA Blackberry Intl Plan.. connects to both Instant Email and Enterprise. ... no probs... although it sucks compared to MS Direct Push... you need to switch APN's manually so that you can use PIE... also, it just feels like bloatware compared to the native push solution....i uninstalled it and continued using MS Direct Push...
Re: Works for me!!
alinefx said:
It works for me... Radio Ver 1.09 o2 XDA exec... using it while roaming in Europe with T-Mobile USA Blackberry Intl Plan.. connects to both Instant Email and Enterprise. ... no probs... although it sucks compared to MS Direct Push... you need to switch APN's manually so that you can use PIE... also, it just feels like bloatware compared to the native push solution....i uninstalled it and continued using MS Direct Push...
Click to expand...
Click to collapse
Could you, please, confirm which versions of ROM, RADIO and ExtROM you use ? The only combination i was able to runn BBCOnnect was T-Mobile ancient ROM 1.20.120. Others never worked.
Would someone please be kind enough to post the ftp link to the exact T-mobile rom that works with the BB connect software?
Never mind I got it all running but I get no messages, I can send them but I have not recieved any.......
I had to call T-Mobile, they reset my location data in their system and now my BB is working!
Next I am going to try to install the O2 ROM, I did a backup using Sprite Software 5.1 and will do a ROM upgrade from T-Mobile to O2 and see if the BB works with that....
I posted this over in the wizard forum and was wondering if this was actually the better place.
http://forum.xda-developers.com/viewtopic.php?p=307453#307453
jab said:
Need some help.
Running a Univeral with the base TMO Rom 1.13.53 WWE and radio 1.03.01. I am running on the Cingular network.
I have installed the BB Connect software. It connected the moment the BES admin added me to the BES network, since then it has not really worked properly.
In looking at the Initial window for BB connect titled "Instant Email - ", I see Lookup, Settings, Register Now, Suspend and Hide enabled. Email Setup is disabled.
Under the Settings button I see:
Identity - my pin, my IMEI and sometimes an IP address.
Under the Status tab I see
Service: Not Connected, Data Tunnel Available, Network Available at different times, but typically Not Connected. I also believe that I see an IP address when I the state is on Network Available on the Identity tab, but since I can't see both tabs at the same time, I am not 100% certain.
I also have the option to suspend, restart, and uninstall on this screen. And a couple of Suspend Options.
Under the Service List, I see:
Blackberry [ALP]
Blackberry [CMIME]
Both of the above services are active. The CMIME Service has some synchronization options available.
Under the IT Policy tab, I see:
One was created yesterday and the name is default
Options Tab:
Connection: Blackberry Solution. Under the details button, APN -- blackberry.net, Username = rim, Password =password, IP Address - 206.51.26.189, Remote Port - 19781, Local POrt = 19780
Pim Tab:
Option to Sync Calendar.
About Tab:
Blackberry Version : 2.1.1.20
Transport Version 2.1.0.44
ROM Version: 1.13
System Version: 227.214.54.234
Device Type: HTC-Universal
Thanks,
JAB
Click to expand...
Click to collapse
Many thanks to whomever can assist me with this.
JAB
Hello together,
i have tested many roms from here with WM 6.1 but all (WWE and GER) Roms doens't work with an exchange sync. All WM 6 Roms are run fine, WM5 teh same but all WM 6.1 doesn't sync. I became allways the same error message in activesync.
Error Code: 85010013
Some people wrote me an PN that the problem is:
- this error comes if the DeviceEncryption.dll and its related registry entries are missing.
- That problem may exist if the developer has removed Enterprise from the ROM. Those modules are needed for the Exchange syncing
Can anybody tell me, if there is a chance to create an WM6.1 ROM that works with the exchange server?
No Problem syncing with Exchange 2007 with cme light ROM:
http://forum.xda-developers.com/showthread.php?t=430394
esackbauer said:
No Problem syncing with Exchange 2007 with cme light ROM:
http://forum.xda-developers.com/showthread.php?t=430394
Click to expand...
Click to collapse
i have tested this rom today, i can't sync with exchange.
Many people doesn't have problems because the exchange setting are not so strong. there is a flag called "allow non-provisionable device", when you turn on this sync works fine but not when it is off. But, it is a security leak when this setting is on!
kandalf said:
i have tested this rom today, i can't sync with exchange.
Many people doesn't have problems because the exchange setting are not so strong. there is a flag called "allow non-provisionable device", when you turn on this sync works fine but not when it is off. But, it is a security leak when this setting is on!
Click to expand...
Click to collapse
Then your server is configured for good reason in this way.
You want to access the server with a ROM which might be potentially unsafe, because it was cooked by some anonymous guy on the internet, whose intentions are unknown.
I guess it is the needed certificates that the cooks dont want to pay for.
esackbauer said:
Then your server is configured for good reason in this way.
You want to access the server with a ROM which might be potentially unsafe, because it was cooked by some anonymous guy on the internet, whose intentions are unknown.
I guess it is the needed certificates that the cooks dont want to pay for.
Click to expand...
Click to collapse
can i solve the problem?
what is with all the self cooking wm6 rom's. the are running all fine! it can't be a certificate problem or?
Mary 3.7 Lite No Flow
Hi, I still find Mary 3.7 is still the best for MS Exchange Sync - for provisional device (have not tried 3.7.1) http://forum.xda-developers.com/showthread.php?t=369917
Kandalf,
I faced same problem as yours. I am using Samsung i780 with WM6.1. Do you find any solutions to add those security components?
Thanks,
Young
cyyp said:
Kandalf,
I faced same problem as yours. I am using Samsung i780 with WM6.1. Do you find any solutions to add those security components?
Thanks,
Young
Click to expand...
Click to collapse
no, it's not running. we have some new htc devices with an official wm 6.1 rom and these devices works great, but not my Vodafone compact GPS.
kandalf said:
no, it's not running. we have some new htc devices with an official wm 6.1 rom and these devices works great, but not my Vodafone compact GPS.
Click to expand...
Click to collapse
Yes, I got some new htc devices with official released WM6.1 and they are all working fine. Really want to find out what's the different between them.
Morning all.
I'm a long-time reader, first-time poster, but I thought I'd share some further findings on this. I've been having similar troubles and have been playing with this for a few days. All cooked 6.1 roms I tried were refusing to work with Exchange 2007, returning the infamous 85010013.
It seems to have been established here & elsewhere that the "Device not provisioned" is causing it, and more specifically the Remote Wipe functionality. Assuming that your organisation isn't willing to not implement this on every phone containing business data, a workaround is needed.
As part of the initial phone setup, you're prompted to set a pin number. After testing, I've found that setting a pin number scuppers the phone provisioning every time. With every test since, skipping this initially and waiting to be prompted to do it when you're asked to enforce the security policy when first connecting to the Exchange server gives no problems whatsoever.
Hope this helps somebody...
Fishbowler said:
As part of the initial phone setup, you're prompted to set a pin number. After testing, I've found that setting a pin number scuppers the phone provisioning every time. With every test since, skipping this initially and waiting to be prompted to do it when you're asked to enforce the security policy when first connecting to the Exchange server gives no problems whatsoever.
Hope this helps somebody...
Click to expand...
Click to collapse
No, i never set the pin at initial phone setup. I always set then pin at the first connect to exchange. I have already the same problem.
So, did the above solution work for anyone? What PIN does he mean? The pin from my SIM card?
Not syncing with Exchange Server - Error 85010013
On my TMO Wing I can flash Touch-IT_v4.4_Stuffed-RUU or Touch-IT_v4.41_Lite-RUU Roms and I am successfully syncing with the Exchange Server.
When I try other ROMs like Touch-IT_v6.1.3_Clean_UC or ITsPapaFinal_Wing (or any PADVIET ROMs) I get error 85010013 when attempting to sync with Exchange Server.
Since it works on some cooked ROMs and not all cooked ROMs I can't see that it's a setting on the Exchange Server. Logic states that there is a difference in the some (perhaps wm6.1) ROMs that is causing the malfunction in syncing with the Exchange Server.
Admittedly, I no very little about programming but I will continue to fish in the dark to learn more about this problem. There are several fantastic chefs here and I'd like to use their ROMs but I need the email to sync for my work.
additional info
I have the same 85010013 problem. Just flashed a new rom and tried to setup exchange. Got the error. Restored from a Sprite backup (level 2) and this added a second exchange server to the list. This one sync'd while the original did not. Deleted the original and then everything seemed fine.
This leads me to believe that it must be something in the Active Sync setup, since at the same time one worked and one didn't Still researching, but wanted to throw this bit of info out there.
Any luck? I hope we can figure this out. How can I get a second Exchange server in my list? SpriteBackup seems dangerous to me...
AAAHHH, i tested several new roms. WM6.1 and WM6.5
All are not working with exchange. Always the same error.
Which WM 6.1 or WM6.5 ROM ist working with the Trinity and Exchange?
hi, im using osavioro's [ROM][WWE] Windows Mobile 6.1 5.2.20270.1.3.1 Ver. 0.4.7.5 at the moment, active sync works perfect with our exchange 2007 over
wifi, gprs. however direct push need gprs to work.
tried several other 6.1 and 6.0 roms and they also worked as long as you have a valid certificate on the server, i fortunate never had any trouble with this.
(when i finaly realized i needed a valid certificate, not self signed)
we have many other devices syncing to the same server as well, iphones3g, wm5, wm6, 6.1. sony ericssons phones (xperia) etc..
allanredo said:
hi, im using osavioro's [ROM][WWE] Windows Mobile 6.1 5.2.20270.1.3.1 Ver. 0.4.7.5 at the moment, active sync works perfect with our exchange 2007 over
wifi, gprs. however direct push need gprs to work.
tried several other 6.1 and 6.0 roms and they also worked as long as you have a valid certificate on the server, i fortunate never had any trouble with this.
(when i finaly realized i needed a valid certificate, not self signed)
we have many other devices syncing to the same server as well, iphones3g, wm5, wm6, 6.1. sony ericssons phones (xperia) etc..
Click to expand...
Click to collapse
Hm, this rom is not working with our exchange server.
new htc devices with origanal wm 6.1 are all working fine with the same server and the same certificate. Only the self cooking rom WM 6.1 and WM 6.5 doesn't work. WM 6 Roms are running.
Hi,
Has anyone found a WM6.1 cooked ROM that works around this problem yet? My organisation upgraded to Exchange 2007 and I had to downgrade back to a stock WM5 ROM to keep being able to sync...
I don't know exactly what are the "Enterprise components" that someone mentioned, but is it that difficult to cook ROM versions that keep these in place?
Thanks in advance!
try turning off extended networking selection in the USB connection option
Hello All,
I believe there are many like me who would love to get the Blackberry Connect Software working on their HDs. At the moment, it seems like black magic how to get it working and the other thread doesn't really contain much useful information on working configurations.
So far, we know the following:
1. It is Radio, ROM and SIM card dependent.
2. You need to have the BB service provisioned on your SIM and have the new style SIMs that support full data functions.
3. Latest version of BB Connect required for TouchHD (4.0.0.106). This is available from HTC Asia on on the internet (just search these boards)
What i'd like to use this thread for is for people to post WORKING configurations with as many details as possible regarding the setup/installation procedure. I'll start with the only configuration I've managed to get working so far.
ROM: Dutty's 1.9b extreme
Radio: 1.12.25.16
SIM: Blackberry service from MTN
Installation/Procedure:
- Flash ROM
- Install BB Connect software
- Provision SIM card
- Connection was activated after a few hours.
Other information:
- The BB connect service defaults to IE as the browser.
- BB Push email service worked but with lag. SEVEN was much better in this regard.
- I was unable to get messenger, stock tabs, weather update, google maps, etc to use the BB connection
- BB push email service creates its own mail folders on your device regardless of what you already have.
- BB email folders do not have full flip to scroll to next message functionality in TF3D.
- BB email did not display pictures, etc
Please lets have other users chime in here and perhaps we can get a Wiki section created for BB Connect on the HD. Lets please keep to the same format as above to keep the information easily referenced and trackable.
Thanks
Thanks for the info, I have been able to run the service with all ROM's expect for the ones built on 6.5 OS's..
Connection was instant in each installation (right after a reset I am connected - then I'd push my service book -- done)
I do not have any lags in mail arrival.
Its satisfactory for me- but as you said you have to stop the BB service prior to any attempt to use the data connection for other purposes (IE, weather...etc)
Only thing I miss is the blackberry messenger.
Thanks for the thread.
Taiseer
Thanks for responding Taiseer.
Could you tell me what mobile operator and country you're using? Secondly, what do you mean by push your service books? Is than an automatic process or manually performed by you? In the installation that worked for me, I didn't do anything of the sort.
After installing did you have your BB sim in the phone or did you insert it later?
TechAnimal said:
Thanks for responding Taiseer.
Could you tell me what mobile operator and country you're using? Secondly, what do you mean by push your service books? Is than an automatic process or manually performed by you? In the installation that worked for me, I didn't do anything of the sort.
After installing did you have your BB sim in the phone or did you insert it later?
Click to expand...
Click to collapse
I am currently residing in Oman and its Omantel...
and normally what I do after the 1st installation and device reset, all of my mail arrives to a new mail account named system..(and I won't be able to send or reply to mail from it), so to be able to get the rest of my accounts and have a better use out of the service, I log on to the Operator's blackberry's site and manually demand a service book sending.. in few seconds mail arrive into auto formed mail accounts..
As far as the SIM card its always in the HD..
It looks like SEVEN may be better for me then, how does battery compare between the two.
Thanks for the information Taiseer. My provider does not offer the internet log on option so I guess I will need to get them to push the service books to me somehow. When I install the software with the sim in it, i get nothing after a soft reset. No pin and no ip address. Did you find that MS Live or any other microsoft service was able to use the BB connection or is it just the browser?
O and O said:
It looks like SEVEN may be better for me then, how does battery compare between the two.
Click to expand...
Click to collapse
Seven has a good service and I've had no complaints. The BB data plan is the cheapest where I live though. So if you can get unlimited (or cheap) data packages, stick with SEVEN. I didn't notice any differences with battery life.
TechAnimal said:
Thanks for the information Taiseer. My provider does not offer the internet log on option so I guess I will need to get them to push the service books to me somehow. When I install the software with the sim in it, i get nothing after a soft reset. No pin and no ip address. Did you find that MS Live or any other microsoft service was able to use the BB connection or is it just the browser?
Click to expand...
Click to collapse
No - you got to stop data connection, but because I am used to my WIFI conection and hotspots everywhere I normally do not discounnect the BB connection, DO you??
Whilst my service worked I was too scared to disconnect the BB connection so I just didn't use any of the other services. It sucked. I've just flashed Davideuck's newest V 2 ROM so we'll see if i can get it working.
Okay, great news people. I've got my service working on Davideuck's Version 2 rom. It required a call to my network provider. For all those installing on a HD, its down to your provider regardless of what they say.
Taiseer, thanks for the heads up about the blackberry page for my subscriber. I managed to track mine down and set up my email accounts from there.
Woohah!
I am using a stock ROM 1.14.405.3(22273) WWE, Radio 1.09.25.15
I hate to have to use a cooked ROM, I've used Dutty's ROM's on my Kaiser and they worked well but this phone works so well I don't want to mess things up.
I believe the stock ROM should work as well. Be sure to hassle your service provider to set it up on their end. I think some providers are not pleased to offer the BB service for non BB phones and do not fully enable the service (they can tell that its not a BB phone from the PIN number). After a talk with my provider, I was told to reset my phone and presto! all was working.
It works on on my Kaiser so I know it works on my T-Mobile plan. I may mess with the radio's to see what I can do.
Sorry to keep adding to this thread but I have some new developments. I upgraded the ROM to 1.19.831.0 and Radio 1.09.25.14
I have version 106 and ran the desktop software, it switched the PIN from the Kaiser to the HD. I changed the version reset the device and now I have the service books and an IP address.
When I look at the status I get network available>data tunnel available then not connected.
Update, since it wasn't working I tried to reinstall BB Connect on the HD, when I tried to configure I got the PIN 0 error. As a last resort I put the SIM in the Kaiser and configured it, then switch to the HD, configured it and it worked!
I'm not sure but it looks like changing the PIN was all I needed to do.
blackberry working great on orange uk htc touch HD standard phone
I downloaded the blacberry install files form a link on this forum, I belive it was the same blackbery files from HTC.
Rom Version 1.19.61.1 wwe
Radio 1.09.25.14
Installed the BB app to phone - then went to start settings > system >" click" icon blackberry.
Blackerry connect (identity) tab shows 3 bits of info
PIN said something like waiting for PIN
IMEI 78*******************
IP Address No connection
Spoke to orange asked for blackberry service. they said 5 permonth £ 250MB of blackberry
Orange sent me text message with a pin number and told me of the orange blackberry site to go to I think it is blackberry.orange.co.uk
On the blackberry.orange.co.uk I enterd the PIN number from the text message and IMEI number.
My phone recived a text a turned it of and turned it back on.
Checked the Blackerry connect (identity) tab
PIN was now populated with the pin that was in the text message
IMIE still there
IP Address says connected.
Went back to the blackberry.co.uk setup my email accounts with blackberry the pressed service book. looked at my phone 20 mins later and my there email accounts were there 2 for work and 1 for home.
I dont do much surfing on the phone but opera works and and the blackberry is fantastic.
orange were very helpfull on this.
But saying that blackberry is really a network service Windows Live I belive does a similar thing you get push email.
I'm glad to see people are getting it sorted. There are certainly many other options for connectivity and push email. Some even work better than the BB service. The reason i'm on the BB service is that its the cheapest way to browse regularly and get push email in my part of the world. When a page can cost as much as 30 pence via gprs versus 20 pounds a month for unlimited data on the BB plan, its a no brainer. Yes, I'm painfully aware we're being gouged but theres no getting away from that.
I have a problem with blackberry connect...
Everything installed just fine, receiving message OK, BUT...I can't send mail because option new mail, reply on mail also, is disabled
Very strange, because I used earlier bb connect on diamond and everything worked...
Any solutions?
peca_bench said:
I have a problem with blackberry connect...
Everything installed just fine, receiving message OK, BUT...I can't send mail because option new mail, reply on mail also, is disabled
Very strange, because I used earlier bb connect on diamond and everything worked...
Any solutions?
Click to expand...
Click to collapse
Its probably because you are only having the "system mail account" you should try to send your service books to your winmo via provider
Thank you very much - I'm tottaly forgot the way how to do that, working now!
Problems with BB connect on HTC HD
Hi guys,
after setting up successfully BBconnect on my HD, I noticed that when I send emails from my BES account on my laptop, I always find them in my Inbox (not in Sent Items as I would expect) of my HD reporting me as Sender and no body message in it. Instead, should I send emails from my handled device, I always find them in Sent Items of my device as expected....Has anyone of you faced the same issue?
Thanks...
Will Blackberry Connect work on the Touch Pro2?
I have installed version 106 and no luck as yet with t-mobile., stiil pending.
I just put the blackberry service on the phone and they said give it another day to activate the service.
Any help/suggestions would be appreciated.
i have been stuck on this issue for a week... no luck...
wrote to htc and they came back saying that look for updates on its site... now that's a really long shot..
would suggest that you too write to them... lets put some pressure..
this is a business phone according to them... then bberry is as much important!
I havent bought this phone yet, but I would only be able to if bbconnect is working.
Could you try to change the device ID to TouchPRO in settings/system/about and change the registry HLM\System\Versions\Aku to .1.6.0
But you need to change it BEFORE you install BBConnect
Please indicate if this makes any difference, otherwise we'll need to wait for a new bbconnect version
When i had installed the software without the above settings, i had a PIN and IP address - but it would not connect.
Later on i had hard reset the phone...
now i re-installed the software with the settings u mentioned, but i do not have a PIN or IP Address and bbconnect will not register either...
could u please tell me how to un-install it safely too? as i do not want to do another hard-reset now!
(btw, i had done a hard reset on the phone earlier coz after i tried 106 and uninstalled it, i installed a previous version 100 and it hung my phone.... )
peebee01 said:
I havent bought this phone yet, but I would only be able to if bbconnect is working.
Could you try to change the device ID to TouchPRO in settings/system/about and change the registry HLM\System\Versions\Aku to .1.6.0
But you need to change it BEFORE you install BBConnect
Please indicate if this makes any difference, otherwise we'll need to wait for a new bbconnect version
Click to expand...
Click to collapse
Thanks..I just unstalled and tried your settings still no connection or PIN.
am sure htc engineers visit these pages too....
hope u guys understand.. that u r touting the tp2 as a business phone.. and we need blackberry too in a business phone to complete the package....
we cannot connect to exchange alone (that incurs data charges and is not roaming friendly - especially international).. we need bberry coz that keeps us mobile from country to country that we visit...
common guys... its just a few lines of code u hv to modify... am sure...
Hi,
Have you tried this?
See WM65 solution here:
http://forum.xda-developers.com/showthread.php?t=502623
I think you have to play with the version number of your WM...
In case of WM61
I used this:
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Br,
Zsocee
I'm an Aussie wanting to purchase a Rhodium...
I'm upgrading from a 7100G blackberry handset. (yup a massive upgrade). Although the most critical part of my phone... (apart from making phone calls) is my blackberry push e-mail...
I can't afford to change over phones until I know that the Blackberry Connect 4.0 works. I know that HTC have a special version of the Blackberry Connect for the Diamond, the Touch Pro ect...
http://www.htc.com/sea/SupportViewNews.aspx?dl_id=497&news_id=61
With Windows 6.5 rumoured to be released within the next month I'm speculating that we won't see Blackberry Connect 4.0 working on the windows mobile 6.1
Zsocee said:
Hi,
Have you tried this?
See WM65 solution here:
http://forum.xda-developers.com/showthread.php?t=502623
I think you have to play with the version number of your WM...
In case of WM61
I used this:
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Br,
Zsocee
Click to expand...
Click to collapse
nope... non of these solutions will work.. tried all of them... even faced a few hard-resets trying older versions of bbconnect.
we have to wait for the next release. hmm....
mirage22 said:
nope... non of these solutions will work.. tried all of them... even faced a few hard-resets trying older versions of bbconnect.
we have to wait for the next release. hmm....
Click to expand...
Click to collapse
Me too!! Not working.
Had T-mobile and Rim on the phone together with no luck.
Well I contacted HTC to find out when it would work and this was the reply I received:
Since Windows Mobile is our platform for the HTC handsets, we would push customers to use the Microsoft exchange server.
The device comes with microsoft exchange server support and also supports IMAP and POP3 accounts.
HTC is not going to release any Blackberry connect applications and it would not up to HTC to do this. If Blackberry wants to develop an application and release it to HTC, you may need to check with RIM/BB.
RIM (is the company name)
Blackberry is the platform
Hope this information helps.
Sounds like the person I was contacted by either has no idea or there's no plan for blackberry connect to work on the touch pro 2.... Oh well looks like I'll have to purchase a storm...
Just be patient...
I'm more than sure that we will get BBC to work the same way we did it before. By manipulating the Device-ID string in the ROM (from HTC-Rhodium to whatever) BBC should recognize the device as "allowed" and it _should_ work. So all we have to do is to wait for the HardSPL-guys getting it done so that we can flash custom ROMs. Once this is done, I assume we will have BBC up and running.
Blackberry Connect.
Blackberry Connect does not work on the device, however, it seems to work on the HD.
From Sems.org
Has anyone tried this?
from http://www.sems.org/entry.asp?entry_id=338#IDComment31926819
Paul
Report Reply 1 reply · active 2 weeks ago
0 Vote up Vote down AirwolfUK · 2 weeks ago
make sure your AKU is set to .1.6.3. I have bbc .106 working fine on my touch pro2 with this and the SetModelID solution
Report Reply
I am planning on upgrading from Fuze to Fortress (TP2) and want to see if this works. You need to make sure your account is provisioned for BBConnect service.
Didn't work for me even after switching system ID to identify as Raphael, on T-Mobile US.
It works fine on the Rhodium. Check out the thread entitled "blackberry connect, not yet working" It got working about halway through. I use BBC on mine but I needed to make a couple of tweaks as outlined in that thread.
Dominoid - Rhodium - Blackberry connect
very interested in your asnwer dominoid.....can you send us more specifics as to how / what / where. We are dying to get Rhodium work with BBErry Connect. Which version worked with yours?
Does anyone know the orignal AKU for the ATT Tilt2?
I hate cross posting in threads, but somehow people decided to open different threads on the same topic. (Maybe a mod can merge them into one if he reads this).
Read more for a final solution without using SetModelID and starting and stoping services each time:
http://forum.xda-developers.com/showpost.php?p=4782317&postcount=163
Direct Link to the HowTo: http://www.silentservices.de/HexEdit-ROM-for-BBC.html
BBC
Works excellanty on my TP2 on Vodafone India Delhi n/w
follow steps on this forum
http://forum.xda-developers.com/showthread.php?p=5123157#post5123157:o