TMO BB Connect for Wizard also works on Universal! - JASJAR, XDA Exec, MDA Pro Software Upgrading

I successfully installed and configured the recently published BB Connect program onto my Universal. T-Mobil Germany officially came out with the BB Connect add-on a few days back, and it turns out it actually is dual-platform-aware, Wizard and Universal.
It can be downloaded at ftp://xda:[email protected]/Uploads/HTC_Wizard/BB Connect/mdavario_sw_bb_03-2006.zip
There is one *but* though. Until now, I only got it to work on TMO-UKs 1.20 MDA PRO ROM, but my suspicion is that it actually has something to do with the radio version. BB Connect works flawlessly on radio versions 1.06 and below (I saw similar behaviour on the Blue Angel devices where radio versions beyond 1.13 could not made to work with BB Connect).
Anyway, although initially I could not get it to work with the Jasjar 1.20 rom, I must say I did use the 1.09 radio. I will be re-installing the Jasjar rom later today, this time with radio version 1.06 and report back on the results.
(While I was writing this, I heard my "T-Mobilized O2 XDA Exec" happily signalling the arrival of new mail )

BB Connect working on MDA Pro
I can confirm that the BB Connect Client from the Wizard is working on my Universal.
It seems also correct that you have to have the t-mobile ROM installed. I tried it with the latest I-Mate ROM but it failed to connect after the initial setup. I then installed the lastest t-mobile ROM and now BB Connect is working like a charm...
Great stuff!!!
Cheers

version no
Wiz,
Kindly advise what version is your latest t-mobile rom.
Thanks & Regards

The combination that works is TMO UK 1.20 (or lower) and radio 1.06 (or lower)
Other versions (Qtek, Imate) work as well, as long as they are AKU1 and *not* AKU2

I can confirm that it DOESNT work on O2 Rom with radio 1.06, with VF Account and DE TMOB BB.. I will try to do the tmob rom update in the next couple of days...
will the tmob rom and bb client work ok with a VF account??

tonyb15re said:
...will the tmob rom and bb client work ok with a VF account??
Click to expand...
Click to collapse
We have a BB Enterprise subscription and a BES at our central location. Our provider is VF Germany. I dont know if you can use BB with VF-Push but I _asume_ that it will work.

took the leap this morning as it appears the rom has other useful things in like an updated BT stack for BT Caller ID Etc..
Bottom line is it all dropped in ok, have BB coming down from our BES, bizarre thing is though the from address is shown as an exchange address and not email, and I cant reply as yet.. maybe something on our BES server needs tweaking..
Anyone know how to remove the Tmob links on the Home Screen? I've changed the theme back to Windows Default for the time being but would like to remove some of the Today ICONS that TMob stick on there..

Wiz said:
I successfully installed and configured the recently published BB Connect program onto my Universal. T-Mobil Germany officially came out with the BB Connect add-on a few days back, and it turns out it actually is dual-platform-aware, Wizard and Universal.
It can be downloaded at ftp://xda:[email protected]/Uploads/HTC_Wizard/BB Connect/mdavario_sw_bb_03-2006.zip
There is one *but* though. Until now, I only got it to work on TMO-UKs 1.20 MDA PRO ROM, but my suspicion is that it actually has something to do with the radio version. BB Connect works flawlessly on radio versions 1.06 and below (I saw similar behaviour on the Blue Angel devices where radio versions beyond 1.13 could not made to work with BB Connect).
Anyway, although initially I could not get it to work with the Jasjar 1.20 rom, I must say I did use the 1.09 radio. I will be re-installing the Jasjar rom later today, this time with radio version 1.06 and report back on the results.
(While I was writing this, I heard my "T-Mobilized O2 XDA Exec" happily signalling the arrival of new mail )
Click to expand...
Click to collapse
Download link not working, can u please upload the same here.
Cheer, Taurus

get from the source
https://after-sales-service.t-mobile.de/eg_online/t-mobile/t_mda_vario.htm

Some N00B questions:
1) How do I tell if I am on AKU1 or AKU2
2) How do I find the older ROM.
THX,
JAB

Answered my 2nd question: ftp://ftp.clubimate.com

ISA Server: extended error message :
Hi, I can not get the zip file when I click on the link.
It can be downloaded at ftp://xda:[email protected]/Uploads/HTC_Wizard/BB Connect/mdavario_sw_bb_03-2006.zip
ISA Server: extended error message :
200 Switching to Binary mode.
200 PORT command successful. Consider using PASV.
550 Failed to open file.
Please advice

Not working on T-Mobile MDA Pro German
Hi tried this, but I cannot get it to connect to the BB server. The software lists IMEI and BB PIN. It seems to connect for one or two seconds (for that time, I see an IP address in the status window), but after that, it disconnects and stays that way.
I phoned T-Mobile MMS (Multimedia Services) yesterday and asked them about it. To my surprise, they did not try to shake me off because I was using a Vario software with my Universal, but honestly tried to reproduce my problem - and succeeded in that.
They told me that the BB client for T-Mobile MDA Pro German should be released "early in April", gave me a EUR 10 Bonus on my bill and told me to watch their homepage for the software update. I'm quite satisfied with that

Wiz said:
I successfully installed and configured the recently published BB Connect program onto my Universal. T-Mobil Germany officially came out with the BB Connect add-on a few days back, and it turns out it actually is dual-platform-aware, Wizard and Universal.
It can be downloaded at ftp://xda:[email protected]/Uploads/HTC_Wizard/BB Connect/mdavario_sw_bb_03-2006.zip
There is one *but* though. Until now, I only got it to work on TMO-UKs 1.20 MDA PRO ROM, but my suspicion is that it actually has something to do with the radio version. BB Connect works flawlessly on radio versions 1.06 and below (I saw similar behaviour on the Blue Angel devices where radio versions beyond 1.13 could not made to work with BB Connect).
Anyway, although initially I could not get it to work with the Jasjar 1.20 rom, I must say I did use the 1.09 radio. I will be re-installing the Jasjar rom later today, this time with radio version 1.06 and report back on the results.
(While I was writing this, I heard my "T-Mobilized O2 XDA Exec" happily signalling the arrival of new mail )
Click to expand...
Click to collapse
Will this work for Any BB Enterprise server, Please clarify i wanted to get rid of the BB at the earliest & use my dopdo only
Cheers, Taurus

Works for me!!
It works for me... Radio Ver 1.09 o2 XDA exec... using it while roaming in Europe with T-Mobile USA Blackberry Intl Plan.. connects to both Instant Email and Enterprise. ... no probs... although it sucks compared to MS Direct Push... you need to switch APN's manually so that you can use PIE... also, it just feels like bloatware compared to the native push solution....i uninstalled it and continued using MS Direct Push...

Re: Works for me!!
alinefx said:
It works for me... Radio Ver 1.09 o2 XDA exec... using it while roaming in Europe with T-Mobile USA Blackberry Intl Plan.. connects to both Instant Email and Enterprise. ... no probs... although it sucks compared to MS Direct Push... you need to switch APN's manually so that you can use PIE... also, it just feels like bloatware compared to the native push solution....i uninstalled it and continued using MS Direct Push...
Click to expand...
Click to collapse
Could you, please, confirm which versions of ROM, RADIO and ExtROM you use ? The only combination i was able to runn BBCOnnect was T-Mobile ancient ROM 1.20.120. Others never worked.

Would someone please be kind enough to post the ftp link to the exact T-mobile rom that works with the BB connect software?

Never mind I got it all running but I get no messages, I can send them but I have not recieved any.......

I had to call T-Mobile, they reset my location data in their system and now my BB is working!
Next I am going to try to install the O2 ROM, I did a backup using Sprite Software 5.1 and will do a ROM upgrade from T-Mobile to O2 and see if the BB works with that....

I posted this over in the wizard forum and was wondering if this was actually the better place.
http://forum.xda-developers.com/viewtopic.php?p=307453#307453
jab said:
Need some help.
Running a Univeral with the base TMO Rom 1.13.53 WWE and radio 1.03.01. I am running on the Cingular network.
I have installed the BB Connect software. It connected the moment the BES admin added me to the BES network, since then it has not really worked properly.
In looking at the Initial window for BB connect titled "Instant Email - ", I see Lookup, Settings, Register Now, Suspend and Hide enabled. Email Setup is disabled.
Under the Settings button I see:
Identity - my pin, my IMEI and sometimes an IP address.
Under the Status tab I see
Service: Not Connected, Data Tunnel Available, Network Available at different times, but typically Not Connected. I also believe that I see an IP address when I the state is on Network Available on the Identity tab, but since I can't see both tabs at the same time, I am not 100% certain.
I also have the option to suspend, restart, and uninstall on this screen. And a couple of Suspend Options.
Under the Service List, I see:
Blackberry [ALP]
Blackberry [CMIME]
Both of the above services are active. The CMIME Service has some synchronization options available.
Under the IT Policy tab, I see:
One was created yesterday and the name is default
Options Tab:
Connection: Blackberry Solution. Under the details button, APN -- blackberry.net, Username = rim, Password =password, IP Address - 206.51.26.189, Remote Port - 19781, Local POrt = 19780
Pim Tab:
Option to Sync Calendar.
About Tab:
Blackberry Version : 2.1.1.20
Transport Version 2.1.0.44
ROM Version: 1.13
System Version: 227.214.54.234
Device Type: HTC-Universal
Thanks,
JAB
Click to expand...
Click to collapse
Many thanks to whomever can assist me with this.
JAB

Related

BBConnect and ActiveSync

First off, THANK YOU to all who contribute here. This site has been ALOT of help.
Question...
I upgraded to WWE 1.42 Rom to have the blackberry...
Problem is now Activesync will and will not sync calendar.
I've read a few posts on going into bb and checking and unchecking pim calendr sync. but even when it does sync, after taken out of the cradle it will delete all calendar entries on the BA.
I've not read any fixes for this, so I am asking the community for help.
Also since upgrading to 1.42, I've noticed a significant lag..
I have SPB 3.0, Phone Alarm, Screen Lock, and an upgraged calendar. all were on prior to upgrade and BB connect.
I'm on US tmobile if that helps, and am recieveing bb emails straight to my phone. Thanks in advance for any help!
I Have exactly the same problem I am on t mobile uk This problem has also only occured since i used the up grade.
I have found the problem i think but dont know how to solve.
I have down graded the phone to the old rom and in the instant email settings there is no Rim Settings. It looks to me as if the Rim setting and MS Sync are fighting for control of the Calander, Which causes the pairing with the pc to be deleted.
So i will stick with the old rom for now although its not as good ie cant get mail alert sound etc.
Anyone have any other ideas please post.
Also one otherthing i have noticed when the phone is in the cradle it cant collect email via blckberry.
Seems t-mobile are no help at all
Thanks for reading this
Merry festive season to you all
excell99a,
does the old rom that you are using have blackberry instant email? if so which one?
Yes it does have instant email
its MDA3_TMUK_v106160_SHIP0307.exe
There is a link in the downloads
You also have to add the Camera2K5_v1 to get the camera to work
This fault has been fixed in the new ROM released yesterday by O2. It has an updated version of the blackberry client.
http://www.my-xda.com/xda2s_soft.html
Sorry
This is for Xda II ?
Will it work for t-mobile MDA III ?
Its for Xda IIs which is HTC blueangel.
You may need to get the t-mobile version (if they have it). At least you know there is a fixed version from RIM so its possbile for t-mobile to release it.
I'll confirm this IS a working rom with WORKING BB Connect!! no more Calendar and Activesync issues!! EVEN after soft resets!! I downgraded from 1.42 to this 1.40, love it!!
I have been unable to load the O2 ROM on to t-mobile UK MDA III. Get country error code
Does anyone know if T-mobile are fixing this or is there an easy way to get the o2 Rom to load

Anyone installed Black 3.0.1 on Vario II (T-Mobile)?

I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
Yes and it worked perfectly.
bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
Its fairly easy, all you really need are the internet and mms settings, look for a thread with operator settings in the title and find a cab file called t-mobile uk fixed.
Just drop it on to a storage card and run it whenever you do a hard reset or flash a new rom version.
Cant see why you would need the other t-mob customaizations as they mostly suck eggs.
Edit:cab file attached below
Here's the cab
Just drag to your Vario and run it.
chrisjasper said:
Its fairly easy,
Click to expand...
Click to collapse
Thanks Chris.
Let me get this right. Upgrade to Black 3.x. Copy CAB to device. Run CAB. Voila? This sets everything I need?
I agree most of the T-Mobile extras are crap but I need the settings for Internet/GPRS/MMS/SMS etc.
Cheers.
yes, working fine here, all connection settings set manually.
bobbyelliott said:
Thanks Chris.
Let me get this right. Upgrade to Black 3.x. Copy CAB to device. Run CAB. Voila? This sets everything I need?
I agree most of the T-Mobile extras are crap but I need the settings for Internet/GPRS/MMS/SMS etc.
Cheers.
Click to expand...
Click to collapse
Yep. I actually have a directory setup on my sd card called rebuilds with the cabs I need to reset my ppc up after flash/hard reset. Generally takes me about half an hour now to set up everything, including restores of pim records
chrisjasper said:
Generally takes me about half an hour now to set up everything, including restores of pim records
Click to expand...
Click to collapse
I'm with Orange and my flashing routine now is:
1) flash new rom
2) run pimping changes
3) manually enter gprs and mms settings
4) sync with 4smartphone exchange server
5) run smsproviders cab off Storage card (to sort voicemail)
6) install spb pocket plus and customise today launchers
7) set up two pop mail accounts
8) sign in and configure windows live messenger
Got it down to about 15 minutes now (but it does help that exchange server syncing is so damn quick.)
I tend to install things like Reader that like a soft reset so it takes me a little longer.
sinmae said:
yes, working fine here, all connection settings set manually.
Click to expand...
Click to collapse
Is it as fast as people say? Did you notice a speed improvement when you installed it?
MDA Vario II works with Black 3.01, what about rSAP?
Hi there,
Just as it has already been mentioned earlier (upgrade to 3.01 on T-Mobile MDA Vario II). I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Speed actually seems faster than before. The question I have got now is what happened to the rSAP (Remote Simm Access Profile) as I need to ensure that I can use my phone in my "troublesome" Mercedes CLS. Never was able to pair it with the car so i'll be testing it tonight. I just noticed that the rSAP seems to be missing.
Any help on this will be greatly appreciated.
Vido.
It works a treat, however when i goto use Live Messenger it cannot connect and doesn't present me with a login form like it did with Black 2.0... Is anyone else having trouble with this? I'm using a Vario II, i've tried connecting over 3G, Wireless and through ActiveSync, all with no joy,
The service may be down, mine works without any hitch. Then again, I haven't and never do install any other third party software.
bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
All working ok for me, web'n'walk back working and exchange server sync'd ok. TomTom OK. Calls OK...
Only problem I have is connecting to a WPA2 WLAN.... maybe me.... maybe the Black 3.0 (2.5 worked ok). Need to spend sometime looking this evening.
Justin
TomTom
Justin, I take it you have the app TomTom on your mobile, rather than being a 910 or similar?
I took one of the other WM6 ROMs and the DUN (data transfer) has been removed so I can only use it as a hands free device and not to update traffic over GPRS.
vido said:
Hi there,
Just as it has already been mentioned earlier (upgrade to 3.01 on T-Mobile MDA Vario II). I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Speed actually seems faster than before. The question I have got now is what happened to the rSAP (Remote Simm Access Profile) as I need to ensure that I can use my phone in my "troublesome" Mercedes CLS. Never was able to pair it with the car so i'll be testing it tonight. I just noticed that the rSAP seems to be missing.
Any help on this will be greatly appreciated.
Vido.
Click to expand...
Click to collapse
I gave rSAP a try with an earlier black build, and I'm sorry to tell you that it behaved exactly the same as WM5 with the Merc car kit - i.e. just doesn't work (even once you've hacked the stack to make the Hermes look like a phone). If you get anywhere, it would be great to hear, but I'm afraid I think the Merc kit is just toooo limited in what it supports.
vido said:
I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Vido.
Click to expand...
Click to collapse
Hi Vido.
I hope you read the extensive guides mr Vanx has done on upgrading. If not, consider this a stern warning to do so *now* (link in my sig)
Your post suggests that you did not put on the olipro bootloader which means you are taking a risk flashing any OS rom onto your phone - if something went wrong, you would brick your phone.
For you and anyone else reading this, please read Mr Vanx's guides and save yourself, and everyone else, the headache of trying to recover your phone as this stuff voids your warranty.
Cheers,
Smiffy.
ok guys im on tmobile usa and mms doesnt work at all on any of the new wm6 roms. do you guys suggest that i try the uk settings
Hi, you need to check this thread http://forum.xda-developers.com/showthread.php?t=299023
If USA not on here go to your T-Mobile website and do the settings manualy or get them from tech support...
Then post in the above thread!
Martyn
Hi Smiffy/All,
I actually followed all the instructions regarding upgrading to WM6 by flashing all the instructions in Mr Vangs guideline and used the 1.40.olipro bootloader. I just didn't type in all the details because of space. What I meant was that this is my first attempt at upgrading to WM6 after reading all the instructions in this forum.
Like I said my phone still does not work with the Mercedes Bluetooth UHI which is a pain and one of the reasons why I performed the upgrade. The other thing I have just noticed is that my ohne now finds it difficult to connect to my wifi at home using simple WEP key. I was only able to connect to my wifi at work only once after which it doesn't connect anymore. Has anybody else encountered this problem or is it only me.
Last question, is it possible to have the VOIP (Sip) work with T-Mobile? it shows up as "Service Blocked" and I read it somewhere that this can be tweaked. does anyone have the settings for testing this?
Apart from that the Black edition 3.01 is really cool.
Regards,
Vido.

New official WM6 ROM + BB Connect Client = working

Anyone already tried the new official HTC ROM (possibly german) and the Blackberry Connect Client (via BIS not BES)? If so, which version (2.1.2.54?)?
I have searched, googled and read so many threats and could not get a clear answer so far.
/edit: It's working - see below.
Thanx, appreciated.
StonyA said:
Anyone already tried the new official HTC ROM (possibly german) and the Blackberry Connect Client (via BIS not BES)? If so, which version (2.1.2.54?)?
I have searched, googled and read so many threats and could not get a clear answer so far.
Thanx, appreciated.
Click to expand...
Click to collapse
I can not believe that amongst so many pros here, no one can confirm? Guys, I really need your help here. Many thanks!!!
Hi
I'm running the HTC released ROM & have BB Connect 4.0 working perfectly on T-Mobile UK.
I'm using the version attached. I installed it and then sent a new service book to my device & it works a treat without ANY messing...
Good luck!
It Works !!!!!!!!!!
gavinmoffitt said:
Hi
I'm running the HTC released ROM & have BB Connect 4.0 working perfectly on T-Mobile UK.
I'm using the version attached. I installed it and then sent a new service book to my device & it works a treat without ANY messing...
Good luck!
Click to expand...
Click to collapse
Hi Gavin,
Thank you indeed for your reply and encouraging message. I will give it a shot and hope for the best.
**edit: Just installed the new official ROM (WM6 German) as well as the BB Connect Client 4.0.0.90 in combination with BIS (not BES) and I am happy to confirm that it's working like a charm. Things I needed to do for the BB Connect client were a couple of reboots until I got my PIN again (same as I had before). After another reboot it started connecting and finally I had my service books sent via my BB internet account and voila - connected and running. Hope this helps others as well. Thanks to Gavin again!!!
All the best
Stony
hi
how come when I install this program doesn't it return me the initial pin and it always tells me in suspended?
Unfortunately not having the pin I cannot effect some it records on my supplier of services to be able to unload the emails.
So this means it should also work on Black Satin and other popular WM6 roms?
Arnie
i run the Offical Offical AT&T ROM by vp3G (vp3G3.0.0) and this cab files works perfect with my BES servers.
This is what I have been waiting for - am going to try it now.
Can I suggest the title of this thread be changed to "NEW BBConnect Version works with WM6 ROMs". I know there are many waiting for an updated version that works without having to Hexedit the build. The current title is a bit misleading.
DvTonder said:
This is what I have been waiting for - am going to try it now.
Can I suggest the title of this thread be changed to "NEW BBConnect Version works with WM6 ROMs". I know there are many waiting for an updated version that works without having to Hexedit the build. The current title is a bit misleading.
Click to expand...
Click to collapse
Hi,
I have changed the title to reflect the current status.
Piluco,
I got my pin after a few restarts (soft reboots) straight from the network. It was the same pin I had before using WM5 and BB Connect 2.1.2.16.
Cheers
Stony
piluco said:
hi
how come when I install this program doesn't it return me the initial pin and it always tells me in suspended?
Unfortunately not having the pin I cannot effect some it records on my supplier of services to be able to unload the emails.
Click to expand...
Click to collapse
Do you have a BB Connect plan through your provider? My PIN didn't show up until I changed my Data plan to a BB Connect plan with Rogers.
Khristopher said:
Do you have a BB Connect plan through your provider? My PIN didn't show up until I changed my Data plan to a BB Connect plan with Rogers.
Click to expand...
Click to collapse
hi
I use vodafone italy and unfortunately I cannot create an account bb connect in how much actually to that the pin I don't have I cannot go on on the site to create my account. I have made many soft reset and tried various programs of bb connect but never anybody that has returned me the pin to be able to shape then my account near my supplier of services.
arnoutboer said:
So this means it should also work on Black Satin and other popular WM6 roms?
Arnie
Click to expand...
Click to collapse
I have BBconnect 4.0.0.90 working OK with the Black X beta2 ROM
anonamouse said:
I have BBconnect 4.0.0.90 working OK with the Black X beta2 ROM
Click to expand...
Click to collapse
I use the scahps 3.54b and unfortunately it doesn't work me the bb in how much it doesn't return me the pin for configuarare the account from the site of vodafone italia
The PIN will only be generated when your service provider activates the BlackBerry service on your account....
Have you asked Vodafone Italia to active BlackBerry facilities on your account? If not, no version of BB Connect will work!
gavinmoffitt said:
The PIN will only be generated when your service provider activates the BlackBerry service on your account....
Have you asked Vodafone Italia to active BlackBerry facilities on your account? If not, no version of BB Connect will work!
Click to expand...
Click to collapse
talking to the operator of vodafone he has explained me the procedure to activate the account but as first footstep going on the site he asks the pin but me unfortunately I am not able avero not having a blacbarry
piluco said:
talking to the operator of vodafone he has explained me the procedure to activate the account but as first footstep going on the site he asks the pin but me unfortunately I am not able avero not having a blacbarry
Click to expand...
Click to collapse
Hi piluco,
Have you set up your account, e.g. via www.mobileemail.vodafone.it ? At any rate and as described above, your provider will have to activate your account plan first.
Cheers,
Stony
StonyA said:
Hi piluco,
Have you set up your account, e.g. via www.mobileemail.vodafone.it ? At any rate and as described above, your provider will have to activate your account plan first.
Cheers,
Stony
Click to expand...
Click to collapse
thanks
in fact if I go there and I go to create an account the first thing that asks me it is the pin of the car that then is that that the program not me from after having him/it installed in the pocket
Schaps roms?
Hi All,
Has anyone else got any of Schaps ROMs working with BBConnect then? I was of the belief that his ROMS wouldn't work?
Looking at either 3.54b or 3.54c ideally
Thanks in advance
EDIT: Had a quick flash anyway and it works a treat!
It wors on SPV M700 Romanian
I am using WM6 (Dopod's D810 ROM) an BB Connect 4.0.0.90 and it works perfectly .Thx a lot .
gavinmoffitt said:
Hi
I'm running the HTC released ROM & have BB Connect 4.0 working perfectly on T-Mobile UK.
I'm using the version attached. I installed it and then sent a new service book to my device & it works a treat without ANY messing...
Good luck!
Click to expand...
Click to collapse
Which EXACT version of ROM you use ? Please, publish version and build number which you can find using "Settings-System-About" screen.

Got bbconnect working!

Thanks a lot for this GREAT forum! Finally got blackberry connect working on my artemis! Downloaded v 4.0.0.92 from this forum last week, thought I'd give it a go. It's been a month since I tried all other versions 4.0.0.84 to 4.0.0.91. They ALL made me sick, had to restore a few times. I was amazed that it worked this time, and still works! I have my work mail coming in from BES, and also configured 3 other mail accounts (gmail, isp and my domain), works like a charm.
of course, thanks Meschle for the fantastic touch 3.01 rom!
cubist, what radio are you using?
how did you manage to get the BES to work? Is there any trick or magic?
Radio 3.07.90, which comes with touch 3.01, no alterations made to registry, like some suggested in other posts for older versions of bbconnect.
Once you manage to get connected, setup personal mail through secure blackberry browsing. Create a login here too for web access, so you can resend service books when needed! Once that is all ok, you should get autoconnected to blackberry over edge. My plan is paid by my company, and we have a bes server with lotus notes. I called our dept to reactivate (they have to activate account with password on server, it works only for 48 hours) Then reactivated with password.
Cubist,
thanks a lot, mine is working as well. Just did as you proposed.
glad I could help you!
by chance, do you know what happens to re-activation after having flashed a new ROM? Do you need to go through the re-activation process again?
you can resend service books from the web. If you have the same radio and bbconnect can install on the rom, you should get connected. For the BES part, I'm not sure. I think the key used to register with the BEserver contains a device id, I'm not sure if that changes when installing another rom. I will know shortly: when touch with wm6.1 comes out, I'll test it.
Hi and wonder if you can help!
I am with O2 in the Uk - XDA Orbit WM6
Got BSoftware 4.0.0.92 and got 1 of my emails working okay, but when adding a 2nd one got the following error message:
Service Book Management
Device Message Store Limit.
You must delete a message store to use service.
example: [email protected]
Do you happen to know the way around this?
Many thanks....Carlos
Some providers only allow a certain amount of mailboxes to be added. Your BES account is the first, probably you can't add more than 1 account.
cubist said:
you can resend service books from the web. If you have the same radio and bbconnect can install on the rom, you should get connected. For the BES part, I'm not sure. I think the key used to register with the BEserver contains a device id, I'm not sure if that changes when installing another rom. I will know shortly: when touch with wm6.1 comes out, I'll test it.
Click to expand...
Click to collapse
cubist, did you finally upgrade to "Artemis Touch 4.01 WM6.1 WWE ROM, 5.2.19199 (Build 19199.1.0.0) (Full, Lite and Vanilla)" and does you BB account still work? I am keen to upgrade, but cannot afford to loose the BB functionality.

Blackberry Connect

Will Blackberry Connect work on the Touch Pro2?
I have installed version 106 and no luck as yet with t-mobile., stiil pending.
I just put the blackberry service on the phone and they said give it another day to activate the service.
Any help/suggestions would be appreciated.
i have been stuck on this issue for a week... no luck...
wrote to htc and they came back saying that look for updates on its site... now that's a really long shot..
would suggest that you too write to them... lets put some pressure..
this is a business phone according to them... then bberry is as much important!
I havent bought this phone yet, but I would only be able to if bbconnect is working.
Could you try to change the device ID to TouchPRO in settings/system/about and change the registry HLM\System\Versions\Aku to .1.6.0
But you need to change it BEFORE you install BBConnect
Please indicate if this makes any difference, otherwise we'll need to wait for a new bbconnect version
When i had installed the software without the above settings, i had a PIN and IP address - but it would not connect.
Later on i had hard reset the phone...
now i re-installed the software with the settings u mentioned, but i do not have a PIN or IP Address and bbconnect will not register either...
could u please tell me how to un-install it safely too? as i do not want to do another hard-reset now!
(btw, i had done a hard reset on the phone earlier coz after i tried 106 and uninstalled it, i installed a previous version 100 and it hung my phone.... )
peebee01 said:
I havent bought this phone yet, but I would only be able to if bbconnect is working.
Could you try to change the device ID to TouchPRO in settings/system/about and change the registry HLM\System\Versions\Aku to .1.6.0
But you need to change it BEFORE you install BBConnect
Please indicate if this makes any difference, otherwise we'll need to wait for a new bbconnect version
Click to expand...
Click to collapse
Thanks..I just unstalled and tried your settings still no connection or PIN.
am sure htc engineers visit these pages too....
hope u guys understand.. that u r touting the tp2 as a business phone.. and we need blackberry too in a business phone to complete the package....
we cannot connect to exchange alone (that incurs data charges and is not roaming friendly - especially international).. we need bberry coz that keeps us mobile from country to country that we visit...
common guys... its just a few lines of code u hv to modify... am sure...
Hi,
Have you tried this?
See WM65 solution here:
http://forum.xda-developers.com/showthread.php?t=502623
I think you have to play with the version number of your WM...
In case of WM61
I used this:
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Br,
Zsocee
I'm an Aussie wanting to purchase a Rhodium...
I'm upgrading from a 7100G blackberry handset. (yup a massive upgrade). Although the most critical part of my phone... (apart from making phone calls) is my blackberry push e-mail...
I can't afford to change over phones until I know that the Blackberry Connect 4.0 works. I know that HTC have a special version of the Blackberry Connect for the Diamond, the Touch Pro ect...
http://www.htc.com/sea/SupportViewNews.aspx?dl_id=497&news_id=61
With Windows 6.5 rumoured to be released within the next month I'm speculating that we won't see Blackberry Connect 4.0 working on the windows mobile 6.1
Zsocee said:
Hi,
Have you tried this?
See WM65 solution here:
http://forum.xda-developers.com/showthread.php?t=502623
I think you have to play with the version number of your WM...
In case of WM61
I used this:
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Br,
Zsocee
Click to expand...
Click to collapse
nope... non of these solutions will work.. tried all of them... even faced a few hard-resets trying older versions of bbconnect.
we have to wait for the next release. hmm....
mirage22 said:
nope... non of these solutions will work.. tried all of them... even faced a few hard-resets trying older versions of bbconnect.
we have to wait for the next release. hmm....
Click to expand...
Click to collapse
Me too!! Not working.
Had T-mobile and Rim on the phone together with no luck.
Well I contacted HTC to find out when it would work and this was the reply I received:
Since Windows Mobile is our platform for the HTC handsets, we would push customers to use the Microsoft exchange server.
The device comes with microsoft exchange server support and also supports IMAP and POP3 accounts.
HTC is not going to release any Blackberry connect applications and it would not up to HTC to do this. If Blackberry wants to develop an application and release it to HTC, you may need to check with RIM/BB.
RIM (is the company name)
Blackberry is the platform
Hope this information helps.
Sounds like the person I was contacted by either has no idea or there's no plan for blackberry connect to work on the touch pro 2.... Oh well looks like I'll have to purchase a storm...
Just be patient...
I'm more than sure that we will get BBC to work the same way we did it before. By manipulating the Device-ID string in the ROM (from HTC-Rhodium to whatever) BBC should recognize the device as "allowed" and it _should_ work. So all we have to do is to wait for the HardSPL-guys getting it done so that we can flash custom ROMs. Once this is done, I assume we will have BBC up and running.
Blackberry Connect.
Blackberry Connect does not work on the device, however, it seems to work on the HD.
From Sems.org
Has anyone tried this?
from http://www.sems.org/entry.asp?entry_id=338#IDComment31926819
Paul
Report Reply 1 reply · active 2 weeks ago
0 Vote up Vote down AirwolfUK · 2 weeks ago
make sure your AKU is set to .1.6.3. I have bbc .106 working fine on my touch pro2 with this and the SetModelID solution
Report Reply
I am planning on upgrading from Fuze to Fortress (TP2) and want to see if this works. You need to make sure your account is provisioned for BBConnect service.
Didn't work for me even after switching system ID to identify as Raphael, on T-Mobile US.
It works fine on the Rhodium. Check out the thread entitled "blackberry connect, not yet working" It got working about halway through. I use BBC on mine but I needed to make a couple of tweaks as outlined in that thread.
Dominoid - Rhodium - Blackberry connect
very interested in your asnwer dominoid.....can you send us more specifics as to how / what / where. We are dying to get Rhodium work with BBErry Connect. Which version worked with yours?
Does anyone know the orignal AKU for the ATT Tilt2?
I hate cross posting in threads, but somehow people decided to open different threads on the same topic. (Maybe a mod can merge them into one if he reads this).
Read more for a final solution without using SetModelID and starting and stoping services each time:
http://forum.xda-developers.com/showpost.php?p=4782317&postcount=163
Direct Link to the HowTo: http://www.silentservices.de/HexEdit-ROM-for-BBC.html
BBC
Works excellanty on my TP2 on Vodafone India Delhi n/w
follow steps on this forum
http://forum.xda-developers.com/showthread.php?p=5123157#post5123157:o

Categories

Resources