Develop Bugs

Anyone installed Black 3.0.1 on Vario II (T-Mobile)?

I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby

bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
Yes and it worked perfectly.

bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
Its fairly easy, all you really need are the internet and mms settings, look for a thread with operator settings in the title and find a cab file called t-mobile uk fixed.
Just drop it on to a storage card and run it whenever you do a hard reset or flash a new rom version.
Cant see why you would need the other t-mob customaizations as they mostly suck eggs.
Edit:cab file attached below

Here's the cab
Just drag to your Vario and run it.

chrisjasper said:
Its fairly easy,
Click to expand...
Click to collapse
Thanks Chris.
Let me get this right. Upgrade to Black 3.x. Copy CAB to device. Run CAB. Voila? This sets everything I need?
I agree most of the T-Mobile extras are crap but I need the settings for Internet/GPRS/MMS/SMS etc.
Cheers.

yes, working fine here, all connection settings set manually.

bobbyelliott said:
Thanks Chris.
Let me get this right. Upgrade to Black 3.x. Copy CAB to device. Run CAB. Voila? This sets everything I need?
I agree most of the T-Mobile extras are crap but I need the settings for Internet/GPRS/MMS/SMS etc.
Cheers.
Click to expand...
Click to collapse
Yep. I actually have a directory setup on my sd card called rebuilds with the cabs I need to reset my ppc up after flash/hard reset. Generally takes me about half an hour now to set up everything, including restores of pim records

chrisjasper said:
Generally takes me about half an hour now to set up everything, including restores of pim records
Click to expand...
Click to collapse
I'm with Orange and my flashing routine now is:
1) flash new rom
2) run pimping changes
3) manually enter gprs and mms settings
4) sync with 4smartphone exchange server
5) run smsproviders cab off Storage card (to sort voicemail)
6) install spb pocket plus and customise today launchers
7) set up two pop mail accounts
8) sign in and configure windows live messenger
Got it down to about 15 minutes now (but it does help that exchange server syncing is so damn quick.)

I tend to install things like Reader that like a soft reset so it takes me a little longer.

sinmae said:
yes, working fine here, all connection settings set manually.
Click to expand...
Click to collapse
Is it as fast as people say? Did you notice a speed improvement when you installed it?

MDA Vario II works with Black 3.01, what about rSAP?
Hi there,
Just as it has already been mentioned earlier (upgrade to 3.01 on T-Mobile MDA Vario II). I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Speed actually seems faster than before. The question I have got now is what happened to the rSAP (Remote Simm Access Profile) as I need to ensure that I can use my phone in my "troublesome" Mercedes CLS. Never was able to pair it with the car so i'll be testing it tonight. I just noticed that the rSAP seems to be missing.
Any help on this will be greatly appreciated.
Vido.

It works a treat, however when i goto use Live Messenger it cannot connect and doesn't present me with a login form like it did with Black 2.0... Is anyone else having trouble with this? I'm using a Vario II, i've tried connecting over 3G, Wireless and through ActiveSync, all with no joy,

The service may be down, mine works without any hitch. Then again, I haven't and never do install any other third party software.

bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
All working ok for me, web'n'walk back working and exchange server sync'd ok. TomTom OK. Calls OK...
Only problem I have is connecting to a WPA2 WLAN.... maybe me.... maybe the Black 3.0 (2.5 worked ok). Need to spend sometime looking this evening.
Justin

TomTom
Justin, I take it you have the app TomTom on your mobile, rather than being a 910 or similar?
I took one of the other WM6 ROMs and the DUN (data transfer) has been removed so I can only use it as a hands free device and not to update traffic over GPRS.

vido said:
Hi there,
Just as it has already been mentioned earlier (upgrade to 3.01 on T-Mobile MDA Vario II). I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Speed actually seems faster than before. The question I have got now is what happened to the rSAP (Remote Simm Access Profile) as I need to ensure that I can use my phone in my "troublesome" Mercedes CLS. Never was able to pair it with the car so i'll be testing it tonight. I just noticed that the rSAP seems to be missing.
Any help on this will be greatly appreciated.
Vido.
Click to expand...
Click to collapse
I gave rSAP a try with an earlier black build, and I'm sorry to tell you that it behaved exactly the same as WM5 with the Merc car kit - i.e. just doesn't work (even once you've hacked the stack to make the Hermes look like a phone). If you get anywhere, it would be great to hear, but I'm afraid I think the Merc kit is just toooo limited in what it supports.

vido said:
I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Vido.
Click to expand...
Click to collapse
Hi Vido.
I hope you read the extensive guides mr Vanx has done on upgrading. If not, consider this a stern warning to do so *now* (link in my sig)
Your post suggests that you did not put on the olipro bootloader which means you are taking a risk flashing any OS rom onto your phone - if something went wrong, you would brick your phone.
For you and anyone else reading this, please read Mr Vanx's guides and save yourself, and everyone else, the headache of trying to recover your phone as this stuff voids your warranty.
Cheers,
Smiffy.

ok guys im on tmobile usa and mms doesnt work at all on any of the new wm6 roms. do you guys suggest that i try the uk settings

Hi, you need to check this thread http://forum.xda-developers.com/showthread.php?t=299023
If USA not on here go to your T-Mobile website and do the settings manualy or get them from tech support...
Then post in the above thread!
Martyn

Hi Smiffy/All,
I actually followed all the instructions regarding upgrading to WM6 by flashing all the instructions in Mr Vangs guideline and used the 1.40.olipro bootloader. I just didn't type in all the details because of space. What I meant was that this is my first attempt at upgrading to WM6 after reading all the instructions in this forum.
Like I said my phone still does not work with the Mercedes Bluetooth UHI which is a pain and one of the reasons why I performed the upgrade. The other thing I have just noticed is that my ohne now finds it difficult to connect to my wifi at home using simple WEP key. I was only able to connect to my wifi at work only once after which it doesn't connect anymore. Has anybody else encountered this problem or is it only me.
Last question, is it possible to have the VOIP (Sip) work with T-Mobile? it shows up as "Service Blocked" and I read it somewhere that this can be tweaked. does anyone have the settings for testing this?
Apart from that the Black edition 3.01 is really cool.
Regards,
Vido.

Windows Mobile 6 (Black 3.1) and Orangeworld

Hi,
Just upgraded my rom, and for some reason, when i go the the orangeworld site in pie, it only displays a text version. No graphics or anything.
Any ideas?

all these fantastic genius's here, and no ideas?

I have noticed this too, and it must be something to do with what PIE reports itself as for User Agent.
The sites work fine with Opera, but cant see if that reports as Mozilla for whatever.
We need someone with WM5 to look....

philg2000 said:
I have noticed this too, and it must be something to do with what PIE reports itself as for User Agent.
The sites work fine with Opera, but cant see if that reports as Mozilla for whatever.
We need someone with WM5 to look....
Click to expand...
Click to collapse
I use PIE+ and tried all the user agents, but no change. Also noticed gprs/3g connection is real unstable! I'm in london, so definately a good coverage!

Erm....?
Any ideas?

What is the URL? Assume you have "show pictures" set etc ? I have black 3.1 on T mobile (well, virgin) and connection seems stable. This is on a m3100

Yeah I noticed this before too... I've only installed Black up to 3.0, so it the problem existed in at least version, maybe earlier.

http://wap.orange.co.uk for orange world. WEorks in opera fine. in PIE every other site i look at displays correctly, only orange so far is appearing as plain text.
As for the connection, i'm using the latest radio upgrade. to be honest, the connection was pants when i had the standard os installed, but then upgraded the radio, which improved it. But now i upgraded the os, the connection is worse than ever.
Also, Skype refuses to log in!
I'm pretty much ready to the sell piece of $h1t on ebay and get something else!!

So nobody able to help me?????

I don't use Orangeworld. Sorry. Have not had this issue. What apn are you using, the orangewap one or the orangeinternet one?

crazyC said:
I don't use Orangeworld. Sorry. Have not had this issue. What apn are you using, the orangewap one or the orangeinternet one?
Click to expand...
Click to collapse
orangeinternet

crazyC said:
I don't use Orangeworld. Sorry. Have not had this issue. What apn are you using, the orangewap one or the orangeinternet one?
Click to expand...
Click to collapse
I dont think its down to that in any case, coz it works fine with Opera.

yeah I know, just grasping at straws. I seem to remember that some of the orange sites only worked via the orangewap apn. never use them so dunno really.

Hi, sorry am unable to help as I have same on orangeworld, but would just recommend that before you sell, you try reverting the radio version to 1.38.0.10 or .01.
Makes it a whole different phone, no dropped signals, better battery.

gibster said:
Hi,
Just upgraded my rom, and for some reason, when i go the the orangeworld site in pie, it only displays a text version. No graphics or anything.
Any ideas?
Click to expand...
Click to collapse
Yeah, no problems - orangeworld works fine in PIE for me WITH graphics (after I fixed it of course!!)
First I would recommend the latest Orange Radio ROM which is 1.38.00.01 - works best for Orange UK (this is not necessary for my fix to work though.)
See my cab file which installs the Orange UK MMS and internet settings as well as fixing the voicemail icon issue and the orangeworld graphics issue
If anyone needs it, I suppose I could create a cab file containing just the fix for orangeworld on PIE

Ok, here is the cab to just fix the Orangeworld site on Orange UK - it also fixes the voicemail icon since this is kinda essential
This should work on all WM6 ROMs on Orange UK
ps. you DO NOT need this file if you are using the cab file in the post above

Thanks alot Rabdo!!! I'll try the radio downgrade when i get home!!! Orange now works a treat!!!
Thanks!!

Just a quick question. What was the problem? It almost looked like it didn't pick up the css or something, but the strange thing was the fact every other site i looked at was fine. Would be nice to know exactly what was up with it.

rabdo! my wife can have your babies if you like!
radio fix and settings cab have sorted me right out!
keep getting the "H" symbol. did a quick test and was close to 500kbs! not sure how reliable that is, but just browsing now is a dream, and no connection dropped!
thanks a lot!

gibster said:
Just a quick question. What was the problem? It almost looked like it didn't pick up the css or something, but the strange thing was the fact every other site i looked at was fine. Would be nice to know exactly what was up with it.
Click to expand...
Click to collapse
I have a similar problem on 3 UK in that none of the icons on Planet 3 show up - is this cab something generic that might fix my problem? My phone is working nice and smoothly and the moment so don't want to install it just in case.....

New official WM6 ROM + BB Connect Client = working

Anyone already tried the new official HTC ROM (possibly german) and the Blackberry Connect Client (via BIS not BES)? If so, which version (2.1.2.54?)?
I have searched, googled and read so many threats and could not get a clear answer so far.
/edit: It's working - see below.
Thanx, appreciated.

StonyA said:
Anyone already tried the new official HTC ROM (possibly german) and the Blackberry Connect Client (via BIS not BES)? If so, which version (2.1.2.54?)?
I have searched, googled and read so many threats and could not get a clear answer so far.
Thanx, appreciated.
Click to expand...
Click to collapse
I can not believe that amongst so many pros here, no one can confirm? Guys, I really need your help here. Many thanks!!!

Hi
I'm running the HTC released ROM & have BB Connect 4.0 working perfectly on T-Mobile UK.
I'm using the version attached. I installed it and then sent a new service book to my device & it works a treat without ANY messing...
Good luck!

It Works !!!!!!!!!!
gavinmoffitt said:
Hi
I'm running the HTC released ROM & have BB Connect 4.0 working perfectly on T-Mobile UK.
I'm using the version attached. I installed it and then sent a new service book to my device & it works a treat without ANY messing...
Good luck!
Click to expand...
Click to collapse
Hi Gavin,
Thank you indeed for your reply and encouraging message. I will give it a shot and hope for the best.
**edit: Just installed the new official ROM (WM6 German) as well as the BB Connect Client 4.0.0.90 in combination with BIS (not BES) and I am happy to confirm that it's working like a charm. Things I needed to do for the BB Connect client were a couple of reboots until I got my PIN again (same as I had before). After another reboot it started connecting and finally I had my service books sent via my BB internet account and voila - connected and running. Hope this helps others as well. Thanks to Gavin again!!!
All the best
Stony

hi
how come when I install this program doesn't it return me the initial pin and it always tells me in suspended?
Unfortunately not having the pin I cannot effect some it records on my supplier of services to be able to unload the emails.

So this means it should also work on Black Satin and other popular WM6 roms?
Arnie

i run the Offical Offical AT&T ROM by vp3G (vp3G3.0.0) and this cab files works perfect with my BES servers.

This is what I have been waiting for - am going to try it now.
Can I suggest the title of this thread be changed to "NEW BBConnect Version works with WM6 ROMs". I know there are many waiting for an updated version that works without having to Hexedit the build. The current title is a bit misleading.

DvTonder said:
This is what I have been waiting for - am going to try it now.
Can I suggest the title of this thread be changed to "NEW BBConnect Version works with WM6 ROMs". I know there are many waiting for an updated version that works without having to Hexedit the build. The current title is a bit misleading.
Click to expand...
Click to collapse
Hi,
I have changed the title to reflect the current status.
Piluco,
I got my pin after a few restarts (soft reboots) straight from the network. It was the same pin I had before using WM5 and BB Connect 2.1.2.16.
Cheers
Stony

piluco said:
hi
how come when I install this program doesn't it return me the initial pin and it always tells me in suspended?
Unfortunately not having the pin I cannot effect some it records on my supplier of services to be able to unload the emails.
Click to expand...
Click to collapse
Do you have a BB Connect plan through your provider? My PIN didn't show up until I changed my Data plan to a BB Connect plan with Rogers.

Khristopher said:
Do you have a BB Connect plan through your provider? My PIN didn't show up until I changed my Data plan to a BB Connect plan with Rogers.
Click to expand...
Click to collapse
hi
I use vodafone italy and unfortunately I cannot create an account bb connect in how much actually to that the pin I don't have I cannot go on on the site to create my account. I have made many soft reset and tried various programs of bb connect but never anybody that has returned me the pin to be able to shape then my account near my supplier of services.

arnoutboer said:
So this means it should also work on Black Satin and other popular WM6 roms?
Arnie
Click to expand...
Click to collapse
I have BBconnect 4.0.0.90 working OK with the Black X beta2 ROM

anonamouse said:
I have BBconnect 4.0.0.90 working OK with the Black X beta2 ROM
Click to expand...
Click to collapse
I use the scahps 3.54b and unfortunately it doesn't work me the bb in how much it doesn't return me the pin for configuarare the account from the site of vodafone italia

The PIN will only be generated when your service provider activates the BlackBerry service on your account....
Have you asked Vodafone Italia to active BlackBerry facilities on your account? If not, no version of BB Connect will work!

gavinmoffitt said:
The PIN will only be generated when your service provider activates the BlackBerry service on your account....
Have you asked Vodafone Italia to active BlackBerry facilities on your account? If not, no version of BB Connect will work!
Click to expand...
Click to collapse
talking to the operator of vodafone he has explained me the procedure to activate the account but as first footstep going on the site he asks the pin but me unfortunately I am not able avero not having a blacbarry

piluco said:
talking to the operator of vodafone he has explained me the procedure to activate the account but as first footstep going on the site he asks the pin but me unfortunately I am not able avero not having a blacbarry
Click to expand...
Click to collapse
Hi piluco,
Have you set up your account, e.g. via www.mobileemail.vodafone.it ? At any rate and as described above, your provider will have to activate your account plan first.
Cheers,
Stony

StonyA said:
Hi piluco,
Have you set up your account, e.g. via www.mobileemail.vodafone.it ? At any rate and as described above, your provider will have to activate your account plan first.
Cheers,
Stony
Click to expand...
Click to collapse
thanks
in fact if I go there and I go to create an account the first thing that asks me it is the pin of the car that then is that that the program not me from after having him/it installed in the pocket

Schaps roms?
Hi All,
Has anyone else got any of Schaps ROMs working with BBConnect then? I was of the belief that his ROMS wouldn't work?
Looking at either 3.54b or 3.54c ideally
Thanks in advance
EDIT: Had a quick flash anyway and it works a treat!

It wors on SPV M700 Romanian
I am using WM6 (Dopod's D810 ROM) an BB Connect 4.0.0.90 and it works perfectly .Thx a lot .

gavinmoffitt said:
Hi
I'm running the HTC released ROM & have BB Connect 4.0 working perfectly on T-Mobile UK.
I'm using the version attached. I installed it and then sent a new service book to my device & it works a treat without ANY messing...
Good luck!
Click to expand...
Click to collapse
Which EXACT version of ROM you use ? Please, publish version and build number which you can find using "Settings-System-About" screen.

New, official, NOR rom

However, it seems that HTC is its normal reliable self at providing urls to their own firmwares. The file is named RUU_Diamond_HTC_NOR_1.93.409.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe, but the url provided by the members.htc.com service is mangled. Has anybody successfully downloaded this?
//Svein

I have the same problems, so i called HTC in norway, they didn't know about it (she actually didn't think it was released yet (way to go HTC)) but they are looking into it now, so hopefully it will be fixed soon (btw the date is a typo.. it should be 7/30/2008, not 6/30/2008 (confirmed by HTC))

Great, let's hope they'll fix it ...a lot of us having this problem

The NOR Version is now available at HTC Europe site.

Anyone that can post this firmware. My serial does not match in HTC's database in Europe as I got mine from China.

http://rapidshare.com/files/133796972/RUU_Diamond_HTC_NOR_1.93.409.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe.html
installed and working great

brumle80 said:
http://rapidshare.com/files/133796972/RUU_Diamond_HTC_NOR_1.93.409.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship.exe.html
installed and working great
Click to expand...
Click to collapse
Is it fast?

feels a lot more responsive and faster than the original rom
only thing I have to change somehow is that they changed the contacts button to video call in the phone Dialer...

It may be a problem related to my handset, but the morning after upgrading, the telephone suddenly refused to connect to the (telenor) network. Simcard in my old samsung works.
//Svein

Weird. Force-flashing it with radio 1.02.25.11 cured it.
//Svein

Blackberry Connect

Will Blackberry Connect work on the Touch Pro2?
I have installed version 106 and no luck as yet with t-mobile., stiil pending.
I just put the blackberry service on the phone and they said give it another day to activate the service.
Any help/suggestions would be appreciated.

i have been stuck on this issue for a week... no luck...
wrote to htc and they came back saying that look for updates on its site... now that's a really long shot..
would suggest that you too write to them... lets put some pressure..
this is a business phone according to them... then bberry is as much important!

I havent bought this phone yet, but I would only be able to if bbconnect is working.
Could you try to change the device ID to TouchPRO in settings/system/about and change the registry HLM\System\Versions\Aku to .1.6.0
But you need to change it BEFORE you install BBConnect
Please indicate if this makes any difference, otherwise we'll need to wait for a new bbconnect version

When i had installed the software without the above settings, i had a PIN and IP address - but it would not connect.
Later on i had hard reset the phone...
now i re-installed the software with the settings u mentioned, but i do not have a PIN or IP Address and bbconnect will not register either...
could u please tell me how to un-install it safely too? as i do not want to do another hard-reset now!
(btw, i had done a hard reset on the phone earlier coz after i tried 106 and uninstalled it, i installed a previous version 100 and it hung my phone.... )

peebee01 said:
I havent bought this phone yet, but I would only be able to if bbconnect is working.
Could you try to change the device ID to TouchPRO in settings/system/about and change the registry HLM\System\Versions\Aku to .1.6.0
But you need to change it BEFORE you install BBConnect
Please indicate if this makes any difference, otherwise we'll need to wait for a new bbconnect version
Click to expand...
Click to collapse
Thanks..I just unstalled and tried your settings still no connection or PIN.

am sure htc engineers visit these pages too....
hope u guys understand.. that u r touting the tp2 as a business phone.. and we need blackberry too in a business phone to complete the package....
we cannot connect to exchange alone (that incurs data charges and is not roaming friendly - especially international).. we need bberry coz that keeps us mobile from country to country that we visit...
common guys... its just a few lines of code u hv to modify... am sure...

Hi,
Have you tried this?
See WM65 solution here:
http://forum.xda-developers.com/showthread.php?t=502623
I think you have to play with the version number of your WM...
In case of WM61
I used this:
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Br,
Zsocee

I'm an Aussie wanting to purchase a Rhodium...
I'm upgrading from a 7100G blackberry handset. (yup a massive upgrade). Although the most critical part of my phone... (apart from making phone calls) is my blackberry push e-mail...
I can't afford to change over phones until I know that the Blackberry Connect 4.0 works. I know that HTC have a special version of the Blackberry Connect for the Diamond, the Touch Pro ect...
http://www.htc.com/sea/SupportViewNews.aspx?dl_id=497&news_id=61
With Windows 6.5 rumoured to be released within the next month I'm speculating that we won't see Blackberry Connect 4.0 working on the windows mobile 6.1

Zsocee said:
Hi,
Have you tried this?
See WM65 solution here:
http://forum.xda-developers.com/showthread.php?t=502623
I think you have to play with the version number of your WM...
In case of WM61
I used this:
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Br,
Zsocee
Click to expand...
Click to collapse
nope... non of these solutions will work.. tried all of them... even faced a few hard-resets trying older versions of bbconnect.
we have to wait for the next release. hmm....

mirage22 said:
nope... non of these solutions will work.. tried all of them... even faced a few hard-resets trying older versions of bbconnect.
we have to wait for the next release. hmm....
Click to expand...
Click to collapse
Me too!! Not working.
Had T-mobile and Rim on the phone together with no luck.

Well I contacted HTC to find out when it would work and this was the reply I received:
Since Windows Mobile is our platform for the HTC handsets, we would push customers to use the Microsoft exchange server.
The device comes with microsoft exchange server support and also supports IMAP and POP3 accounts.
HTC is not going to release any Blackberry connect applications and it would not up to HTC to do this. If Blackberry wants to develop an application and release it to HTC, you may need to check with RIM/BB.
RIM (is the company name)
Blackberry is the platform
Hope this information helps.
Sounds like the person I was contacted by either has no idea or there's no plan for blackberry connect to work on the touch pro 2.... Oh well looks like I'll have to purchase a storm...

Just be patient...
I'm more than sure that we will get BBC to work the same way we did it before. By manipulating the Device-ID string in the ROM (from HTC-Rhodium to whatever) BBC should recognize the device as "allowed" and it _should_ work. So all we have to do is to wait for the HardSPL-guys getting it done so that we can flash custom ROMs. Once this is done, I assume we will have BBC up and running.

Blackberry Connect.
Blackberry Connect does not work on the device, however, it seems to work on the HD.

From Sems.org
Has anyone tried this?
from http://www.sems.org/entry.asp?entry_id=338#IDComment31926819
Paul
Report Reply 1 reply · active 2 weeks ago
0 Vote up Vote down AirwolfUK · 2 weeks ago
make sure your AKU is set to .1.6.3. I have bbc .106 working fine on my touch pro2 with this and the SetModelID solution
Report Reply
I am planning on upgrading from Fuze to Fortress (TP2) and want to see if this works. You need to make sure your account is provisioned for BBConnect service.

Didn't work for me even after switching system ID to identify as Raphael, on T-Mobile US.

It works fine on the Rhodium. Check out the thread entitled "blackberry connect, not yet working" It got working about halway through. I use BBC on mine but I needed to make a couple of tweaks as outlined in that thread.

Dominoid - Rhodium - Blackberry connect
very interested in your asnwer dominoid.....can you send us more specifics as to how / what / where. We are dying to get Rhodium work with BBErry Connect. Which version worked with yours?

Does anyone know the orignal AKU for the ATT Tilt2?

I hate cross posting in threads, but somehow people decided to open different threads on the same topic. (Maybe a mod can merge them into one if he reads this).
Read more for a final solution without using SetModelID and starting and stoping services each time:
http://forum.xda-developers.com/showpost.php?p=4782317&postcount=163
Direct Link to the HowTo: http://www.silentservices.de/HexEdit-ROM-for-BBC.html

BBC
Works excellanty on my TP2 on Vodafone India Delhi n/w
follow steps on this forum
http://forum.xda-developers.com/showthread.php?p=5123157#post5123157:o