Hello
If you have problem to connect MDA Compact III, P3300, Artemis to Vista WMDC.
Just click on you PPC
Start > Settings > Connections > USB to PC
and Uncheck "Enable advanced network functionality"
That's all, no need to reinstall drivers, no SP1, no soft and hard reset.
PLEASE MAKE THIS STICKY, MANY PEOPLES HAVE PROBLEM WITH THIS
Thank you
thanx so much for the info...i fried my brain trying to connect it but i never thought to uncheck that damn thing....
i can not
I´ve already done this but i am not able to connect my p3300 to the wmdc.
I also do not find the drivers
could you help me?
I am not able to find that "USB to PC" icon in settings->connections menu. Or anywhere else. Maybe because I have a cooked ROM (Tom_B&B_v5.0_with_cube).
BTW I'm running Windows 7 and can't connect the device to pc. I tried WMDC but it keeps saying that my device is not connected.. So i thought that the reason might be this "advanced connectivity".
Thx in advance for some response
Well I've already found it - I'm a dumbass It wasn't in connections but in system..
Now it's time to test it.
Well even if I turned it off there is still no luck connecting it. Even in device manager there is no mobile devices tree. I have a cooked ROM so maybe this causes the problem?
Related
I have problems that when I connect my device (any wm6 rom btw) I get the popup on my XP pc that my device is not functioning the way it should be.
It gives a USB device is not functioning properly....
Any suggestions?
I have tried all of the activesync troubleshooting I could think of.
Cheers,
HJ
hellejoep said:
I have problems that when I connect my device (any wm6 rom btw) I get the popup on my XP pc that my device is not functioning the way it should be.
It gives a USB device is not functioning properly....
Any suggestions?
I have tried all of the activesync troubleshooting I could think of.
Cheers,
HJ
Click to expand...
Click to collapse
have you done this:
start>settings>connections(tab)>USB to PC
untick "enable advanced networking functionality"
Nice shoot
Having the same problem, so stupid it was activate on my last rom lol
I had problems with this settings activated on my older ROMs (it disconnected WiFi on my laptop when Hermes was connected), but with Black 2.0 problem has disappeared. I think It is due to changes in OS.
and does anyone know what is the purpose for this "enable advanced networking functionality"??
PLEASE HELP!
Since yesterday - i can't sync:
I get only a gong (which seems that the plug is established)
but nothing happens.
I reinstalled ActiveSync 4.5 (serval times)
I tried it on 4 PC's.
I use the Artemis Touch 4.02 WWE.
Is there a possibility to do something in my situation
PLEASE HELP!
thx
peter
man i had the same ****....and the phone's just a month old...tried a different cable...worked...the default cable charges...but refuses to sync...new cable works fine....go figure
delete your partnerships in AS and try to set up a new one
just try to uncheck USB advance....
hi
pls go to settings -> System tab -> USB to PC -> uncheck checkmark or do viceversa
it will definitely works...
Thx
aakashvijay said:
hi
pls go to settings -> System tab -> USB to PC -> uncheck checkmark or do viceversa
it will definitely works...
Thx
Click to expand...
Click to collapse
* First I changed to unchecked - my device tried to connect - but failed .
* I rebooted my Artemis - my device tried to connect - but failed .
* Then I checked it again - my device tried to connect - but failed .
* I rebooted my Artemis once more - my device tried to connect - and it worked!
thx a lot
peter
AFTER Reconnect - It doesn't work any more
Questions:
Does it depends on a image or is it a hardware trouble?
Does it depends on the pagepoolsize (4mb)?
??
thx
peter
tried an other cable like dv8sted said?
my artemis killed 2 usb cable since last november. cant explain how but it does. only used it for sync/loading and got same issues like you.
dv8ted said:
man i had the same ****....and the phone's just a month old...tried a different cable...worked...the default cable charges...but refuses to sync...new cable works fine....go figure
Click to expand...
Click to collapse
Daiphi said:
tried an other cable like dv8sted said?
my artemis killed 2 usb cable since last november. cant explain how but it does. only used it for sync/loading and got same issues like you.
Click to expand...
Click to collapse
Thx for your adwise.
I tried it with a new usb-cable, but no differences.
I tried it on 4 PC's (with serveral AS-installations)
Shall I make a hard-reset??
thx
peter
once again - delete partnerships in AS, on PC.
you can check your cable by connecting after hard reset, with "naked" rom
shoonari said:
once again - delete partnerships in AS, on PC.
you can check your cable by connecting after hard reset, with "naked" rom
Click to expand...
Click to collapse
thx
I tried it after hard reset, but no connection could be established.
(without any AS partnership on it)
Only the little gong appeared, ...
Then I restored my backup, but the connection failed too.
thx for your help
peter
You may have a fault in the USB socket on your phone. This happened to me with my old magician when one of my kids stood on the cable yanking it out really hard. My solution was to carefully squeeze the end of the cable (the plug that goes into the phone) a little bit tighter with some pliers. After that with that cable, no problem. But I imagine we all have our own different problems.
Only when a fresh reboot
It also happened to my. I just works when the phone is connected while the computer is swichting on. If you try to connect while the computer is up and running it fails, but if you connect before switching the pc on is runs smoothly.
It could be a windows issue. I have the same problem. @home my o2 orbit has some problem on syncing. It connects and authenticates, after that shows check if you have Activesync installed on pc. Some times it works after reinstalling Activesync. But on my office there is no problem at all. Always run smoothly.
So I suggest check with another PC and then try reinstall the Activesync.
Lhrt
well i think it is an issue with htc cables.the plug at my cable is mulfuctioned but it works perfectly on my charger and on another cable!!
lhrt said:
It could be a windows issue. I have the same problem. @home my o2 orbit has some problem on syncing. It connects and authenticates, after that shows check if you have Activesync installed on pc. Some times it works after reinstalling Activesync. But on my office there is no problem at all. Always run smoothly.
So I suggest check with another PC and then try reinstall the Activesync.
Lhrt
Click to expand...
Click to collapse
Thx for your adwise!
But I checked it at (now) 6 different PC's with different cables.
I reinstalled AS severale times - but no changes...
As somebody said, maybe it's a hardware-issue?
I don't now what to do
thx
peter
peter_fuchs1 said:
Thx for your adwise!
But I checked it at (now) 6 different PC's with different cables.
I reinstalled AS severale times - but no changes...
As somebody said, maybe it's a hardware-issue?
I don't now what to do
thx
peter
Click to expand...
Click to collapse
I used to have this problem with my Artemis, all to do with 'Advance Network Connectivity'
Go to Start -> Settings -> Systems -> USB to PC
Uncheck the 'Enable Advanced network functionality' then try and reconnect. Once that has worked, take out USB cable, recheck the check box and connect again.
Should work everytime now....
Well, at least it has for me...
bobjbain said:
I used to have this problem with my Artemis, all to do with 'Advance Network Connectivity'
Go to Start -> Settings -> Systems -> USB to PC
Uncheck the 'Enable Advanced network functionality' then try and reconnect. Once that has worked, take out USB cable, recheck the check box and connect again.
Should work everytime now....
Well, at least it has for me...
Click to expand...
Click to collapse
Thx
But it doesn't work for me
I shall use bluetooth ...
and will never be able to change my image
thx
peter
did you checked if your WM5storage program works?
lhrt said:
did you checked if your WM5storage program works?
Click to expand...
Click to collapse
Do I need this application??
thx
peter
Hey there,
I try to synch my PC with my tp2. I own a PC with Vista and I plugged the TP2 on it. Bute the winmo device center can't find the tp2, so I can't put any files on my phone. The phone is charged via USB, so there should be a connection, but I can't find it in the explorer as a mass storage device...
Is it possible I did something wrong or can you help me fix this problem?
Bye,
Christopher
Bueggi said:
Hey there,
I try to synch my PC with my tp2. I own a PC with Vista and I plugged the TP2 on it. Bute the winmo device center can't find the tp2, so I can't put any files on my phone. The phone is charged via USB, so there should be a connection, but I can't find it in the explorer as a mass storage device...
Is it possible I did something wrong or can you help me fix this problem?
Bye,
Christopher
Click to expand...
Click to collapse
In connection settings do you have the option to "Allow USB Connections" enabled? make sure that box is ticked.
connect the device first and then open up the winmo device center. it's the only way it works for me.
Swith this checkbox off in the settings: Advanced connections.
When you connect your phone to your pc, open up the device manager and you should find an unknown device in the list. If oyu right click on it, go to update drivers, and then when the wizard comes up, you need to point it to a specific location...
If you then point it to the folder where the mobile device center is installed then it should find the necessary drivers and suddenly your pc will have found your phone
Certainly, this is how I have to do it with active sync on my pc at work (for some reason since connecting my TP2 - previously it had my TyTNII connected - it doesn't automatically recognise the device in terms of using the right drivers).
i had a similar issue, it was zonealarm. Try it with firewall turned off.
Hi all,
I have the same Active Sync connectivity issues, and they happen quite often, I should say... I did some investigation on my own, and after some digging (and talking to some friends), I managed to discover where the problem lies.
It seems that Windows Vista's Active Sync service get's kinda "numb" sometimes... and to "wake" it up, we have to start and stop the service. Here's my workarround:
Before we start, and since you may need use "start" and "stop" the Active Sync service quite often, I suggest you create a batch file (just create a normal text file and rename it to .bat after saving it) containing the following:
net stop rapimgr
net start rapimgr
With this file you'll be able to restart the service with just 2 clicks (followed by a "Y" and the Enter key).
Here are 5 simple steps:
1. After a failed connection attempt, close Windows Mobile Device Center and disconnect your TP2 from USB;
2. Run the batch file you created previously, and wait a couple of seconds after the DOS window disappears;
3. Reconnect the TP2 to USB and wait a few seconds (considering all the TP2 drivers were already automatically installed, if not, wait for them to install);
4. On your TP2, select the Active Sync option. On your PC, open My Computer and you should see your TP2 appear (if not already there ). At this point the Active Sync connection is already established;
5. Open Windows Mobile Device Center and wait a few seconds for the software to "wake up". The software should Connect to your TP2 successfully.
Et voilá. You're all set to replicate via Active Sync, and to transfer files to and from your device via Windows Explorer.
Repeat the process everytime the connection fails (which in my case, it happens quite often ). If it doesn't work the first time, try again, and if it's still not working... there's not much you can do besides restarting your PC and try all over again (blame Microsoft, not me ).
For the Disk Drive not connecting issue, you might want to to take a look into your Windows Device Manager > Storage > Disk Management and check if you can see your memory card in there.
When connected using the Disk Drive option on your TP2, it behaves like any other USB disk/pen drive, and it can be conflicting with another drive letter that already exists on the system (it's stupid but it happens quite often). To solve this particular issue, just change the drive letter associated with the TP2 memory card (it should have no drive letter associated if conflicting) to an available drive letter (right after your CD/DVD-ROM drives). Click OK ando this issue is solved.
Hope it helped...
P.S.: I also have ZoneAlarm (latest version - original copy) with max security definitions, and I can assure you that it has nothing to do with this issue.
It's terrible - tried every suggestion mentionned, but it just won't help.
When trying to update the driver, I can point to c:\windows\WindowsMobile\Drivers, but it won't find a suitable driver.
(I think the driver in Serial should be used, but it won't let me!)
Tried removing and installing WinMobile many times, removing the 'Unknown device' etc., but it just won't help!
This is a problem on every computer I tried with several cables.
However, the device did connect correctly when I still had WM6 on it. Flashed various ROMs from Miri, but for every ROM it's the same problem...
be sure you have checked the "synchronize all computers with connection" and drop down menu "usb" in active sync in your PDA (located in settings tab / active sync - menu/connections)
the naming can warry cause i don't use english wm
spyrox04 said:
be sure you have checked the "synchronize all computers with connection" and drop down menu "usb" in active sync in your PDA (located in settings tab / active sync - menu/connections)
the naming can warry cause i don't use english wm
Click to expand...
Click to collapse
Thanks, but of cause I already checked this.
Besides, this should not change the useage of the device as remote disc.
Also, I noticed with the ROM from Atom that the device stops charging as soon as the PC sees something is connected to the USB post. (I only get an unknown device message and that's the only device that is 'installed')
Trouble syncing Tilt and Tilt 2 with Windows Mobile Device Center
I have two laptops and two cell phones. I can sync with the Windows XP laptop with no problem, however, I can't sync with the Vista computer at all. I've even tried reformatting the Vista laptop, but can't get it to sync. I've tried uninstalling the driver for the connection through the Device Manager as well as the Windows Mobile Device Center. Then reinstalling Windows Mobile Device Center and the driver. I've checked the cable and USB port. They work for everything else I can throw at them, but can't get them to sync. Windows Mobile Device Center does not show any devices connected (either Tilt or Tilt2). Any advice?
Laptop 1
Windows XP SP3
Activesync version 4.5
Microsoft Outlook 2007
Laptop 2
Windows Vista Home Premium SP1
Windows Mobile Device Center
Outlook 2007
Cell phone 1
AT&T Tilt
Windows Mobile version 6.1
AT&T Tilt 2
Windows Mobile version 6.5
Any update for the connection problems?
Here it still does not work; the device is still not seen as mobile device, but as 'unknown device'.
I'm not sure what i did but when I plug my phone into my Vista equipped laptop, it gives me the "USB device not recognized" message. I have done all the general trouble shooting. A friend has a mogul and for Sh**'s and giggles, I plugged his phone in and wala, the drivers instantly downloaded and WMDC wanted to sync with it. Is there a way to format the phone or someway fix this problem so I could sync, flash the phone, and start from scratch??
Open up Settings\Connections\USB to PC if enable advanced network functionality is checked, uncheck it and try again. Thats what i had to do for my HTC 8525 after upgrading to wm6.
Dear Sirs;
Maybe this part of forum not be the proper place for my question but I don't know the poeple more expert than XDA masters.
Since last monday, computer cant recognize my Diamond when I connect it by USB cable and "USB device not recognized" appears. I will be really appreciated if you kindly help me.
Best Regards
Dariush Chegini
Try reinstalling Active Sync/Windows Mobile Device Center.
First remove Active Sync/ WMDC, restart PC and than install Active Sync/ WMDC.
Thanks for your kind attention. I reinstalled Activesync...no change, computer can't recognize the Diamond. My Diamond charges with both charger and computer, USB headphone works but PC can't recognize it....
I'm so confused and will be really appreciated if XDA masters help me.
Best Regards
XP or Vista or Windows 7 or which OS?
I've tried by both WIN XP and Vista.
could be a few possibilities for XP atleast...
activesync - file->connection settings->allow usb connections checked
faulty cable, try another one
faulty port on computer, try another one
driver issue - a difficult one...
i had this on my xp, found out there's something wrong with the cable - phone charging fine via computer USB, but XP says it doesn't recognize the device so doesn't connect to activesync....
good luck
Try on your Diamond -
Start>Settings>USB to PC
Unchek "Enable faster data synchronization"
If none of the above solutions work, maybe a hard reset...
I tried another cables, all options in "USB to PC", Activesync options, hardreset, even install other ROM but PC still can't recognize the Diamond.
It seems to be a Hardware problem but Diamond can be charged by USB and USB headphone works properly... I'm so confused .
Thanks Millions
Dariush
dchegini said:
I tried another cables, all options in "USB to PC", Activesync options, hardreset, even install other ROM but PC still can't recognize the Diamond.
It seems to be a Hardware problem but Diamond can be charged by USB and USB headphone works properly... I'm so confused .
Thanks Millions
Dariush
Click to expand...
Click to collapse
Try this in order...
1. Connect diamond to pc - it should at least charge as your say, but not detect Activsync
2. Goto Settings > Connections > USB to PC
3. Check Allow USB Connections > Uncheck allow fast data sync...
Does it connect?
if not and if you are using Vista
1. goto Windows Mobile device Center
2. check the attached image to see you have the same settings...
Does it connect?
if still not, then it could be driver issues, which I can suggest, once you reply to the above...
Thanx for your attentions. I've tried uncheking the said bottom but no change.
I used to connect the Diamond to the same notebook without any problem for more than 16 months, but the damn notebook stop recognizing my Diamond these days .
Thanks Millions
Dariush
may be usb port on your computer is malfunction. Did u try different usb port?
You need to open device manager in control panel to see how you diamond is listed.
Ever since i started with a new company 3 years ago they have some software that prevents activesync from connecting to any device I have from their computers using USB.
I went Bluetooth method and all is fine. I just use the USB for large, direct file transfer to internal storage.
If you get issues with activesync and usb and can take ages to resolve (if possible).
I guy's.
After a lot of search in this forum and a lot of other forum's, i came to this threat.
I had the same problem, my diamond didn't connect to my pc.
I had tried all the different suggestion, and nothing seemed to work. until i read the post of cloudedhopes, that suggested to change the usb cable. Because it was the only thing that i hadn't tried, i did change the cable, and it worked!
So i'm posting only to thank you guy's for all of the help, given not directly to me, but to all user!