Hi,
i have a problem with the USB-Port of my Diamond.
Some months ago it begins that the USB connection broke up after a time.
But now the PC dont recognize than i connect the phone.
The Headset is still working and also charging is no problem.
Does anybody have the same problem? Or know what to do?
Thanks
MLee
RE:
It looks pretty much like the problem that i have, my info:
DIAM100 MFG 64M
SPL-1.24.Hard
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x30
that's what the bootloader says.
Related
Anyone know how to get the phone out of a mode with a blank screen with the words "Serial V1.00" written on it.
I've tried a hard and soft reset on it, and running the upgrade again. No luck
I realise that there's probably a FAQ which covers this, but haven't been able to locate it on this site yet.
thanks in advance!
Thats an indication that it is now in Bootloader mode. You need to re-install the ROM.
UD.
It sounds plausible that I am stuck in bootloader mode. How do I get out of bookloader mode?
Its the USB cable that I'm using to try and flash the device. I've not tried a couple of ROM upgrade programs from different suppliers, but I keep getting a "connection error 101".
thanks in advance
iainh666 said:
It sounds plausible that I am stuck in bootloader mode. How do I get out of bookloader mode?
Its the USB cable that I'm using to try and flash the device. I've not tried a couple of ROM upgrade programs from different suppliers, but I keep getting a "connection error 101".
thanks in advance
Click to expand...
Click to collapse
I think you can find your answer in 50 treats arround here:
Remove all cards (SIM + SD) from your device.
Run the update
Teja
I worked out the problem. I plugged in a different cable, and instantly it switched from serial to USB.
phew!
thanks for all your help.
I have the same problem
can any one explain how to fix it I get USB v1.00
I have the same problem
can any one explain how to fix it I get USB v1.00
hi friends
i have just bought T-mobile MDAIII ( also knows as 2 XDA2s/imate PDA2K)
AND I WONDERED ABOUT UPGRADING MY ROM AND BY MISTEK WHILE UPGREADING IT GOT DISCONNECTED FROM USB
AND NOW ITS NOT WORKING AT ALL
WHEN ITS CONNECTED TO USB THE SCREEN SHOWS
USB V2.05
AND WHILE ITS OUT OF USB ITS SHOWS
SERIAL V2.05
THE PHONE IS NOT GETTING ON NOR ITS SHOWING SOMEHTINGS ELS THAN THIS
I TRIED TO RESET ALSO BUT ITS NOT GETTING RESET TOO
CAN ANYONE HELP ME TO SWITCH ON MY PHONE TO ITS ORIGINAL VERSION
THANKX
I REQUIRE HELP ON URGENT BASIS SO KINDALY REPLY AS SOON AS POSSIBLE
THANK U ALL THE PPL
Please, don't SHOUT
Hi, I am new to the world of MDA and have recently tried to upgrade using JASJAR_WWE_11353_137_10301 rom but now my phone is stuck (i think it is the bootloader" it says serial on top and changes to usb when i connect it to my cradle. After reading a couple of posts i was able to upload it with the same rom but instead of using ROMUgradeUT i used MaUpgradeUt_noID.exe but after it was still on the bootloader screen even though it had upgraded. If anyone can help me i will appreciate it.
Try other ROM
Hy !
If You see the loader, You may try to load an other ROM.
For me, it worked smotthly after using an other computer (a laptop). The USB link may be a source of problems too . ..
I used UniversalRUU with a thingonaspring build: worked fine. Good luck !
V.
I wanted to upgrade ranju wm6.
Something went wrong and now my device will not start up.
In bootloader mode I can see Serial v1.01
I tried the MTTY (1.6), but can't see a USB port. Even after killing m........exe on host PC.
That only adds an additional port(not comm), but still no USB port.
Therefor can't execute: set 14 0
Please help!!!!!
Would like to go back to WM5 (qtek rom)
Best regards
Exactly the same problem
Hi Guys ,
I got exactly the same problem. Stuck in the bootloader and nothing works anymore. Not even the MTTY tool....
Hopefully someone could help us.
cheers
jurjen
Same Here..
Stuck in bootloader screen after upgrading to ranju's 7.7
that makes three of us.
When I try to enter bootloader is asks me to enter 0 to hard reset?
!
I also got stuck the same way.
solutions given are not working! any other solution?
Same here,
Maybe i've overlooked the universal version.
I understood that the ranju 7.7 is only for the G3 and G4.
Aperently there are more versions of the universal. Where is the version number on my universal? I bought mine as the qtek 9000.
How do you flash the universal when it doesn't boot anymore?
Thnx
Trying to solve the problem I found this:
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
My device seems to have been fixed.
After flashing Ranju 7.7 it took 6 times to align the screen but it is working now.
I will report here if anything terrible has happend , so far so good
Nope
It's not working! All tried...
USB device not recoganised! so first two steps are out!
3rd not working
checked another (correct) Universal
Hi Guys,
indeed I haven't been able to select the USB port in the MTTY tool. But when I try my old phone - a working universal (with broken sound) - I neither make contact with the USB port. So could it be that my laptop has something wrong?
cheers
Jurjen
Hi
Just using the original cable and on another computer it worked
difference between Cables
Hi ,
good to hear that you have fixed your universal. What is the main difference between the original cable and a normal usb cable. And how do I recognise both?
Hope to unbrick mines soon.
cheers
Finally it worked
Hi all,
Indeed when using another cable I got my dearest universal back.
So indeed using another cable can help a lot.
Thanks for all your suggestions.
cheers
Jurjen
Hey guys,
I Was in the process of unlocking my sim using HTC_Hermes_SIM_CID_Unlock_v3a and the cable came out because my little brother ran n tripped over the cable.
It was up to 7 % as it was uploading the ROM onto my phone ( The screen how it says it should take about 10 min )
Then I tried re-starting but the computer wont recognize the phone and active sync wont recognize it either, it's stuck on the tri coloured screen
Says ;
HERM100
I PL-1.01
HERM100
SpL-1.40.Olipro
What can I do to fix the phone?
Thanks