Hey guys,
I Was in the process of unlocking my sim using HTC_Hermes_SIM_CID_Unlock_v3a and the cable came out because my little brother ran n tripped over the cable.
It was up to 7 % as it was uploading the ROM onto my phone ( The screen how it says it should take about 10 min )
Then I tried re-starting but the computer wont recognize the phone and active sync wont recognize it either, it's stuck on the tri coloured screen
Says ;
HERM100
I PL-1.01
HERM100
SpL-1.40.Olipro
What can I do to fix the phone?
Thanks
Related
I messed up upgrading Atom Exec Life from WM5-6. Middle of process the upgrade stopped. Phone now says !!!Please plug-in the USB cable and reenter the eboot!!! DSUU MODE please Wait...
How do I get phone to see active sync and get OS back to WM5 or upgrade to WM6?
DSU mode died
I have same problem with u....
After that how about your XDA ???
My XDA, after the DSU mode, and when i reseted the XDA, my Xda could not respons anything even the light .....I dont know how to recure itt.....
Please help me .....
Thanks
Hi, I am new to the world of MDA and have recently tried to upgrade using JASJAR_WWE_11353_137_10301 rom but now my phone is stuck (i think it is the bootloader" it says serial on top and changes to usb when i connect it to my cradle. After reading a couple of posts i was able to upload it with the same rom but instead of using ROMUgradeUT i used MaUpgradeUt_noID.exe but after it was still on the bootloader screen even though it had upgraded. If anyone can help me i will appreciate it.
Try other ROM
Hy !
If You see the loader, You may try to load an other ROM.
For me, it worked smotthly after using an other computer (a laptop). The USB link may be a source of problems too . ..
I used UniversalRUU with a thingonaspring build: worked fine. Good luck !
V.
I HAVE A REALY BIG PROBLEM I INSTALED EnergyROM Series 3.0 21728 IN TITANIUM SERIES AND IT WORKED FOR 1 DAY NOW I TURNED IT OFF AND TURNED IT BACK ON AND THE ONLY THING THAT GOES ON IS THE XDA DIAMOND LOADING SCREEN WITH THE
R 1.09.25.23
G 52.51.25.26I
D 2~~Phoenix~~
but the problem is my computer doesnt recognize my phone so i cant even run the hardspl what should i do??? please help
ive had that happen...try to flash back to stock, then flash to a custom rom...
cheers!!
yea but the problem is that my pc doesnt recognize my phone the phone charges the baterie the circles starts glowing but the pc doesnt recognize that anything is conected
stenk said:
yea but the problem is that my pc doesnt recognize my phone the phone charges the baterie the circles starts glowing but the pc doesnt recognize that anything is conected
Click to expand...
Click to collapse
Did you see if the computer recognizes the phone when it is in bootlaoder mode? Also did you try to do a Hard Reset?
as soon as i turn the phone on it doesnt react to anything i i cant even turn it off by pressing the power buten i trying useing the reset buten it works also but the only way to turn the phone off ist by takeing the baterie out is there a way to load a rom or hardspll it without it conecting to the pc??
have to tried a hard reset ?
if not look at this
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html
remember this will wipe the phone.....
let us know how you get on....good luck!
Hindsight
Not that this will help with your current problem, but if you do manage to get your phone working, I suggest always keeping a stock ROM image in the root folder of your Internal storage. That way if you ever have problems with activesync or vista sync, you can always just flash using the diamond bootloader.
(Hold Volume down and back button, then press reset)
Saved my butt a few times in the past.
thanks alot guys a used the bootloader to try and install a new rom we will see what wil happen in 10 min
omg ok now everything is good i instaled a new rom and everything is good now THANKS ALOT GUYS
glad all is good
thread closed
hello all.
i just brought a second touch diamond unlocked but i'm having a few problems.
1. does not connect in windows 7 but however does connect to usb mode in bootloader.
now i tried flashing hard-spl onto the device, it goes to as far as the white progress bar, and does nothing.progress bar remains on 0%.
2. i did a hard rest and when the phone finally loaded it was in arabic, makes me wonder if the phone is imported. the s/n does work on the official website.
3. what i would like is help on connecting it to my computer and be able to slash a custom rom it.
please can sombebody please help me out of this pickle pls.
Try downgrading the radio to one below 1.02.xxxxx before flashing the HARDSpl
Also download Windows Mobile Device Centre from MS to get active sync running on the PC
ive done it
thanks all ive it,you guys are great.
thanks for all the advise.
Hi everyone,
I am using Htc Desire 816G mediatek version( Asia India) #chipset MT6592. Android 4.4.2, Rooted. Please help,
I rooted (iroot) n installed cwm recovery through MTK droid tool, and have a flashable Stock rom (working {made with mtk droid tool by following some guides} ) with a whole backup of its system files that are accessible by SPflash tools.
Problem is i tried porting a [4.4.2] Emotion UI custom rom of same chipset and skipped porting kernel (actually forgot) and after flashing am stuck on a Infinite Black screen Bootloop which reboots itself for every 7-8 seconds, :crying:
Already tried getting into recovery mode by pressing POWER BUTTON+ VOLUME (-) but so success it keeps rebooting! although i have sorted out how to switch it off. POWER BUTTON+ VOLUME(-) + VOLUME(+)
As Spflash tool or Flash tool requires a switched off phone for flashing stock rom but when i connected to PC in off mode it gets on with the same Infinite Black screen Bootloop.....making it undetectable for PC.
Please help me in recovering it back to normal i 've all the necessary files and software! PLS PLS PLS :crying:
help!!!!
I'm too stuck in bootloop. Phone is hard bricked. Not able to do anything. screen in black and while connecting with laptop/pc its disconnecting and connecting again, every 3-4 secs. HTC customer care refused to fix. Please help!!!
If you are going to play with custom ROMs you might as well learn how to open the case and unplug the battery. There are videos on youtube on how to do it, but simply you start at sim slots and pry between the back cover and above the slots with a plastic pry tool or a cut up credit card and work around the phone. The cover should pop off as you go around. The bottom half near the battery is also stuck together with sticky tape so you have to use larger piece of credit card to break the sticky bond. The plastic case is very durable so you don't really have to be too gentle. Unplug battery and plug it back in. Keep cover off till you have working phone. At his point the phone should be off so you can easily hold volume+power to get to boot loader then recovery to load twrp or cwm backup. The cover easily snaps back together. Just plan ahead so all the corners are aligned as you snap around the phone.
rahul332004 said:
I'm too stuck in bootloop. Phone is hard bricked. Not able to do anything. screen in black and while connecting with laptop/pc its disconnecting and connecting again, every 3-4 secs. HTC customer care refused to fix. Please help!!!
Click to expand...
Click to collapse
You can't expect customer support for a device you bricked yourself... Honestly. Pull the battery and hook it up to PC with it out.
Still its connecting and disconnecting. After removing battery also it won't stay connected. Any idea to make it alive?
Sent from my Galaxy Nexus using XDA Free mobile app
rahul332004 said:
Still its connecting and disconnecting. After removing battery also it won't stay connected. Any idea to make it alive?
Sent from my Galaxy Nexus using XDA Free mobile app
Click to expand...
Click to collapse
Did you get into boot loader before plugging in USB cable to PC?
pcjunky said:
Did you get into boot loader before plugging in USB cable to PC?
Click to expand...
Click to collapse
No, i tried formatting with sp flash tool. With all the right drivers it recognized the phone and begin the process, but i got error dram not enable 4032. I read about it. As per suggestion i removed all related files and tried again. Now pc recognize it, it wont go into loop of connecting and disconnect. Now i am not able to flash stock rom into it. I appreciate all of you. Thanks in advance.
Please help with flashing it!!!!
Sent from my Galaxy Nexus using XDA Free mobile app
i have a htc816g i downloaded xposed then installed firmware, phone got stck on android is starting up. pulled out the battery, phone totally dead. not detecting on pc. dim red light on conneting to pc, any solutions? Godbless
Same problem
Hi, i have a Blu Life 8 (MT6592) and as @rahul332004 i'm in the same situation...
After an apparently soft brick that endend in a Infinite Black Screen Bootlog i tried to make a Format with SP flash tool (that was idiot by my part, without any meeting of this) and now a i have a FULL HARD BRICKED PHONE NO FAKE 4K FREE DOWNLOAD...
But i have the hope of you guys can help me.
The phone doesn't turn on, when i connect the usb cable it doesn't seems like if charging or nothing, apparently dead no?... Well this is the magic thing, when i try to Flash again the Stock ROM it Works!... yes, i looks like if doing something, complete the progress bar of flashing and says it's "OK" but really doesn't nothing, still not boot, no charging log, no blu logo, no android logo... What you think?