I messed up upgrading Atom Exec Life from WM5-6. Middle of process the upgrade stopped. Phone now says !!!Please plug-in the USB cable and reenter the eboot!!! DSUU MODE please Wait...
How do I get phone to see active sync and get OS back to WM5 or upgrade to WM6?
DSU mode died
I have same problem with u....
After that how about your XDA ???
My XDA, after the DSU mode, and when i reseted the XDA, my Xda could not respons anything even the light .....I dont know how to recure itt.....
Please help me .....
Thanks
Related
Hello
I've O2 XDA Exec, and i was trying to update the rom, i download the latest rom from o2.co.uk. During upgrade it first detected the rom version etc.. correct but then suddenly in the middle of upgrade it said it cannot connect to the PDA and since then it is in bootloader mode, as soon as i switch it on or if i plugin the USB cable it goes into bootloader mode, please guide what should i do now? How it fix it again? I don't mind even having it back up on old rom, but i need to get it fixed.
Please guide
Greets
Kapil
funtoosh said:
Hello
I've O2 XDA Exec, and i was trying to update the rom, i download the latest rom from o2.co.uk. During upgrade it first detected the rom version etc.. correct but then suddenly in the middle of upgrade it said it cannot connect to the PDA and since then it is in bootloader mode, as soon as i switch it on or if i plugin the USB cable it goes into bootloader mode, please guide what should i do now? How it fix it again? I don't mind even having it back up on old rom, but i need to get it fixed.
Please guide
Greets
Kapil
Click to expand...
Click to collapse
You can reload from the bootloader mode. The problem you have faced is often due to a defective USB cable. Please direcly connect to the original USB cable (not through hub). Before connecting open active sync on desktop go to File/Connecting and uncheck allow usb connection check box.
Please read this:
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
Hello
Thanks for trying ot help, but it was VISTA giving the problem, i fixed it as per instructions on:
http://forum.xda-developers.com/showthread.php?t=291723
Thanks again.
Greets
My Universal is dead, will only get into bootloader when plugged into the mains, not usb.
Any ideas?
I was trying to upgrade my XDA IIs using my card reader but when I run the file named GetBL my XDA went off and it displays "serial" at the top and "v2.07 at the bottom. How can I put everything back to normal? Is there anyone in the Philippines that could help me? Thanx...
did you try hard reset?
Yes I did but nothing happened. Will you give me a hand on this. Is there any other way to put it all back? Thanx....
dude we have the same prob ill tell u wat 2 du if i fixed it...have u tried gh?
I haven't tried it dude. What's gh dude? Will you give me a hand on this. I can't figure out what's the problem. Thanx...
gh=greenhills
do you have a usb cable?is your BA still detected by the computer when plugged using the usb cable?
I haven't tried it yet but I have a cradle and usb. But what if it's detected. What should I do? What will I also do if it's not detected. Thanx
villain08 said:
I haven't tried it yet but I have a cradle and usb. But what if it's detected. What should I do? What will I also do if it's not detected. Thanx
Click to expand...
Click to collapse
if it gets detected.. there'll be another question
does it still enter BL (bootloader mode)? haven't been playing with my BA for a long time now, that i have already forgotten how to enter BL mode..
anyway.. if it still enters BL mode.. there may still be a lot of chance reviving it..
AW! i was not able to read the very first post carefully.. you are in the BL or bootloader mode.. to return to normal phone, just reset your device (poke the reset hole at the bottom) or remove the battery, replace it, then hit the power button..
getBL or enterBL is a program that resets your device and lets it enter BL (bootloader) mode.. you need to be in the bootloader mode to be able to flash new/upgrade ROMs..
anyway.. there is a more easier and safer/faster way of flashing roms that does not include the use of the memory card technique.. you only need the USB cable/cradle, your ROM and the RUU (upgrade utility) which will be run on the desktop pc.
where are you located in the phils? maybe i can help you..
dear all friends
i have flashed i607 with i600 firmware andi see phone off and it cant connect to pc to flashed it back to i607 please help me how can i slove this problem are there any idea to slove it with mirosd or anything . please replay with helps .
Press and hold both the "Right Soft key" & the "Camera Button" at the same time. Then hit the power button with the other two buttons still depressed. You will now be in the USB Downloader mode and now Windows will detect it and you can flash it.
thanks for your replay but it go ro usb downloder mode but it cant detect phone in pc same problem .please other idea
waleed2 said:
thanks for your replay but it go ro usb downloder mode but it cant detect phone in pc same problem .please other idea
Click to expand...
Click to collapse
reboot your pc, try another pc, try another usb cable.
not work with same problem try other pc and other usb cable same problem
please where is other friends help me
where is our moderators and friends please ineed help in my problem
,i have the same question , have you solove your problom?
any solution ??? i got one says phone off!!!
bachatia said:
any solution ??? i got one says phone off!!!
Click to expand...
Click to collapse
Have you seen the date of the last post
yes, but my cuestion is, exist any solution for this???
Doubt it as Excalibur users, might be worth making a post in smartphone general and see if get a reply?
Is there not bj forums?
hi.... i got a O2 xda stealth hangs on startup... i tried hard reset but din
work... now i want to update ROM but the problem is i cant connect to pc...
active sync is installed ... everything seems fine... plz help
BR
.:KHALIFA:.
can anyone tell the pinouts for this phone
plz help..................
khalifa_smart said:
plz help..................
Click to expand...
Click to collapse
Goto to your PDA setting and uncheck USB to PC.
Note: Check task before connecting to USB ensure no task including Active Sync.
FYI.
Im using VISTA Ultimate to update my XDA.
From WB 6.1 back to WM5. WM 6.1 too buggy and battery drained fast.
Cheers!
lorgem said:
Goto to your PDA setting and uncheck USB to PC.
Note: Check task before connecting to USB ensure no task including Active Sync.
FYI.
Im using VISTA Ultimate to update my XDA.
From WB 6.1 back to WM5. WM 6.1 too buggy and battery drained fast.
Cheers!
Click to expand...
Click to collapse
bro i din got u ...... my o2 just hangs on startup (O2) .... how can i go to
pda settings???????????
you can try the engineering mode
The device doesn't boot, I see only O2 logo. Hard reset doesn't help and the Firmware update process stops with the first message?
1. turn off the device;
2. enter engineering mode;
3. in Main menu choose Boot Config;
4. in Configuration menu choose EBOOT-Launch Image;
5. turn off the device;
6. now hard reset or upgrade firmware.
Sometimes helps another method: leave the device without the battery for about 30 minutes, then turn your O2 XDA Stealth on.
• How to enter engineering mode?
1. turn off your O2 XDA Stealth ;
2. hold Flag, OK and Camera + press and hold Power button;
3. use navigation buttons to select the settings.
Click to expand...
Click to collapse
try to have a look here
http://forum.xda-developers.com/showthread.php?t=352468
abdelrahim said:
you can try the engineering mode
try to have a look here
http://forum.xda-developers.com/showthread.php?t=352468
Click to expand...
Click to collapse
i already tried all this but din work for me....
i there any other way????????
BR
.:KHALIFA:.
khalifa_smart said:
i already tried all this but din work for me....
i there any other way????????
BR
.:KHALIFA:.
Click to expand...
Click to collapse
Try to remove the battery for 12-24 hours, if this doesnot work , I suggest you take it to a repair centre.....
abdelrahim said:
Try to remove the battery for 12-24 hours, if this doesnot work , I suggest you take it to a repair centre.....
Click to expand...
Click to collapse
problem solved.... just solded the charging jack...
BR
.:KHALIFA:.
hello all.
i just brought a second touch diamond unlocked but i'm having a few problems.
1. does not connect in windows 7 but however does connect to usb mode in bootloader.
now i tried flashing hard-spl onto the device, it goes to as far as the white progress bar, and does nothing.progress bar remains on 0%.
2. i did a hard rest and when the phone finally loaded it was in arabic, makes me wonder if the phone is imported. the s/n does work on the official website.
3. what i would like is help on connecting it to my computer and be able to slash a custom rom it.
please can sombebody please help me out of this pickle pls.
Try downgrading the radio to one below 1.02.xxxxx before flashing the HARDSpl
Also download Windows Mobile Device Centre from MS to get active sync running on the PC
ive done it
thanks all ive it,you guys are great.
thanks for all the advise.