Develop Bugs

WM5->WM6 DSUU MODE Please Wait

I messed up upgrading Atom Exec Life from WM5-6. Middle of process the upgrade stopped. Phone now says !!!Please plug-in the USB cable and reenter the eboot!!! DSUU MODE please Wait...
How do I get phone to see active sync and get OS back to WM5 or upgrade to WM6?

DSU mode died
I have same problem with u....
After that how about your XDA ???
My XDA, after the DSU mode, and when i reseted the XDA, my Xda could not respons anything even the light .....I dont know how to recure itt.....
Please help me .....
Thanks

MDA Pro Bricked

Hi, I am new to the world of MDA and have recently tried to upgrade using JASJAR_WWE_11353_137_10301 rom but now my phone is stuck (i think it is the bootloader" it says serial on top and changes to usb when i connect it to my cradle. After reading a couple of posts i was able to upload it with the same rom but instead of using ROMUgradeUT i used MaUpgradeUt_noID.exe but after it was still on the bootloader screen even though it had upgraded. If anyone can help me i will appreciate it.

Try other ROM
Hy !
If You see the loader, You may try to load an other ROM.
For me, it worked smotthly after using an other computer (a laptop). The USB link may be a source of problems too . ..
I used UniversalRUU with a thingonaspring build: worked fine. Good luck !
V.

Stuck in bootloader mode after WM6 upgrade

I wanted to upgrade ranju wm6.
Something went wrong and now my device will not start up.
In bootloader mode I can see Serial v1.01
I tried the MTTY (1.6), but can't see a USB port. Even after killing m........exe on host PC.
That only adds an additional port(not comm), but still no USB port.
Therefor can't execute: set 14 0
Please help!!!!!
Would like to go back to WM5 (qtek rom)
Best regards

Exactly the same problem
Hi Guys ,
I got exactly the same problem. Stuck in the bootloader and nothing works anymore. Not even the MTTY tool....
Hopefully someone could help us.
cheers
jurjen

Same Here..
Stuck in bootloader screen after upgrading to ranju's 7.7
that makes three of us.
When I try to enter bootloader is asks me to enter 0 to hard reset?

!
I also got stuck the same way.
solutions given are not working! any other solution?

Same here,
Maybe i've overlooked the universal version.
I understood that the ranju 7.7 is only for the G3 and G4.
Aperently there are more versions of the universal. Where is the version number on my universal? I bought mine as the qtek 9000.
How do you flash the universal when it doesn't boot anymore?
Thnx

Trying to solve the problem I found this:
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
My device seems to have been fixed.
After flashing Ranju 7.7 it took 6 times to align the screen but it is working now.
I will report here if anything terrible has happend , so far so good

Nope
It's not working! All tried...
USB device not recoganised! so first two steps are out!
3rd not working

checked another (correct) Universal
Hi Guys,
indeed I haven't been able to select the USB port in the MTTY tool. But when I try my old phone - a working universal (with broken sound) - I neither make contact with the USB port. So could it be that my laptop has something wrong?
cheers
Jurjen

Hi
Just using the original cable and on another computer it worked

difference between Cables
Hi ,
good to hear that you have fixed your universal. What is the main difference between the original cable and a normal usb cable. And how do I recognise both?
Hope to unbrick mines soon.
cheers

Finally it worked
Hi all,
Indeed when using another cable I got my dearest universal back.
So indeed using another cable can help a lot.
Thanks for all your suggestions.
cheers
Jurjen

Need Help: Wizard stuck in bootloader, not recognized by computer

My HTC Wizard (Cingular 8125) is stuck in the bootloader mode. I had successfully flashed a new rom, and all was well until it started shutting down. After a couple of hard resets with no change, I tried to put it in bootloader mode to flash a downgraded rom. Now I can only get to the bootloader screen and the usb connection is not recognized by the computer or the device. Any suggestions?
sl1p
Cingular 8125 G3
IPL/SPL 2.26
ROM CR86 Touch HD 1.2 (Ezinput)

I have a useless suggestion, just to keep this problem at the top of the list so you find help:
First, try using a different USB port on your computer. Maybe the one you're using fried, or perhaps for some reason the device is just not getting enough powre through it. Try one of the ports on the back of your computer, directly connected to the motherboard. I assume the USB port you're currently using is the one you always use, so this probably won't help at all. But worth a shot.
Also, have you posted this problem in the device specific forum? Someone there might be of more assistance.

help needed

hello all.
i just brought a second touch diamond unlocked but i'm having a few problems.
1. does not connect in windows 7 but however does connect to usb mode in bootloader.
now i tried flashing hard-spl onto the device, it goes to as far as the white progress bar, and does nothing.progress bar remains on 0%.
2. i did a hard rest and when the phone finally loaded it was in arabic, makes me wonder if the phone is imported. the s/n does work on the official website.
3. what i would like is help on connecting it to my computer and be able to slash a custom rom it.
please can sombebody please help me out of this pickle pls.

Try downgrading the radio to one below 1.02.xxxxx before flashing the HARDSpl
Also download Windows Mobile Device Centre from MS to get active sync running on the PC

ive done it
thanks all ive it,you guys are great.
thanks for all the advise.