hello all.
i just brought a second touch diamond unlocked but i'm having a few problems.
1. does not connect in windows 7 but however does connect to usb mode in bootloader.
now i tried flashing hard-spl onto the device, it goes to as far as the white progress bar, and does nothing.progress bar remains on 0%.
2. i did a hard rest and when the phone finally loaded it was in arabic, makes me wonder if the phone is imported. the s/n does work on the official website.
3. what i would like is help on connecting it to my computer and be able to slash a custom rom it.
please can sombebody please help me out of this pickle pls.
Try downgrading the radio to one below 1.02.xxxxx before flashing the HARDSpl
Also download Windows Mobile Device Centre from MS to get active sync running on the PC
ive done it
thanks all ive it,you guys are great.
thanks for all the advise.
Related
Hello
I've O2 XDA Exec, and i was trying to update the rom, i download the latest rom from o2.co.uk. During upgrade it first detected the rom version etc.. correct but then suddenly in the middle of upgrade it said it cannot connect to the PDA and since then it is in bootloader mode, as soon as i switch it on or if i plugin the USB cable it goes into bootloader mode, please guide what should i do now? How it fix it again? I don't mind even having it back up on old rom, but i need to get it fixed.
Please guide
Greets
Kapil
funtoosh said:
Hello
I've O2 XDA Exec, and i was trying to update the rom, i download the latest rom from o2.co.uk. During upgrade it first detected the rom version etc.. correct but then suddenly in the middle of upgrade it said it cannot connect to the PDA and since then it is in bootloader mode, as soon as i switch it on or if i plugin the USB cable it goes into bootloader mode, please guide what should i do now? How it fix it again? I don't mind even having it back up on old rom, but i need to get it fixed.
Please guide
Greets
Kapil
Click to expand...
Click to collapse
You can reload from the bootloader mode. The problem you have faced is often due to a defective USB cable. Please direcly connect to the original USB cable (not through hub). Before connecting open active sync on desktop go to File/Connecting and uncheck allow usb connection check box.
Please read this:
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
Hello
Thanks for trying ot help, but it was VISTA giving the problem, i fixed it as per instructions on:
http://forum.xda-developers.com/showthread.php?t=291723
Thanks again.
Greets
My Universal is dead, will only get into bootloader when plugged into the mains, not usb.
Any ideas?
Hi, I am new to the world of MDA and have recently tried to upgrade using JASJAR_WWE_11353_137_10301 rom but now my phone is stuck (i think it is the bootloader" it says serial on top and changes to usb when i connect it to my cradle. After reading a couple of posts i was able to upload it with the same rom but instead of using ROMUgradeUT i used MaUpgradeUt_noID.exe but after it was still on the bootloader screen even though it had upgraded. If anyone can help me i will appreciate it.
Try other ROM
Hy !
If You see the loader, You may try to load an other ROM.
For me, it worked smotthly after using an other computer (a laptop). The USB link may be a source of problems too . ..
I used UniversalRUU with a thingonaspring build: worked fine. Good luck !
V.
hi all,
I was upgrading my tmobile's rom to 6.1 when all of a sudden, the USB cable seemed to disconnect. I did the instructions on screen to enter recovery mode but it just shut off after like 7% updating. now, whenever I turn my dash on, it just displays the HTC logo and doesn't advance at all. Can anyone help? Thanks.
bootloader mode
incidentally, how do I enter into bootloader mode from a powered down dash?
Okay here are the steps.
1) First take out the battery and keep it out for about 10 seconds.
2) Place the battery back in
3) Hold the sym (camera button) down for like 5 seconds
4) While still holding the button down plug the usb cord in.
5) Now you should see a tri colored screen
6) Upload the phones "official rom." Official roms could be found below in my signature. Official rom is the rom the phone came with originally. For example if you have T-Mobile then you will download the T-Mobile rom.
7) Once you get the rom going, you can then upload to the new 6.1 rom (rom found below again).
8) Let me know if this works.
jdoggraz,
thanks for your help, i tried it, but it somehow auto-shuts down at 3%, I'm thinking it's because I'm using winxp on parallels desktop off of a mac. i will try to reformat my laptop and install winxp from there and see if it works. wish me luck!
happybabyhippo said:
jdoggraz,
thanks for your help, i tried it, but it somehow auto-shuts down at 3%, I'm thinking it's because I'm using winxp on parallels desktop off of a mac. i will try to reformat my laptop and install winxp from there and see if it works. wish me luck!
Click to expand...
Click to collapse
Yah that is the problem, install winxp directly and it should work.
Thanks for the help dude. I never got to install winxp. Although in the process, I've managed to dual boot my HP laptop with Leopard and Vista. It's working now. I've just been so used to using my TytnII before where you could simply cid unlock it with a program and install any rom you want. it's a little bit different here with the Dash but, all's well.
Thanks.
Oh well I am happy that you got it working...
My HTC Wizard (Cingular 8125) is stuck in the bootloader mode. I had successfully flashed a new rom, and all was well until it started shutting down. After a couple of hard resets with no change, I tried to put it in bootloader mode to flash a downgraded rom. Now I can only get to the bootloader screen and the usb connection is not recognized by the computer or the device. Any suggestions?
sl1p
Cingular 8125 G3
IPL/SPL 2.26
ROM CR86 Touch HD 1.2 (Ezinput)
I have a useless suggestion, just to keep this problem at the top of the list so you find help:
First, try using a different USB port on your computer. Maybe the one you're using fried, or perhaps for some reason the device is just not getting enough powre through it. Try one of the ports on the back of your computer, directly connected to the motherboard. I assume the USB port you're currently using is the one you always use, so this probably won't help at all. But worth a shot.
Also, have you posted this problem in the device specific forum? Someone there might be of more assistance.
I'm stuck here and I need help to resolve this problem.
I'm a noob and I tried to flash my HTC Touch Pro 2 SPRINT with the Rhodium-HardSPL_V1_10_R3 after reading some threads on how to do that now.
But it didn't work kept on displaying Connection Error.I tried so many times but it didn't work out. Then I tried using the SSPL Manual as alternative.
I extracted and copied it to my device ( can't remember if my device was still plugged to my PC or not) and then ran the program.
My device went blank screen and I waited for some time and it didn't come on ( I waited patiently).
when nothing happened,I then removed the battery and tried hard resetting but it won't still come on.
Now,I cannot synchronized my device with my PC because it kept requesting for driver software for Qualcomm CDMA Technologies MSM (guess it no longer recognized my device) and my phone won't come. So I can't complete the flash.
Please I need help to resolve this problem...I have been a little unfortunate with HTC phones nd I need this to work.
I'm new here and will appreciate the help.
cosytony said:
I'm stuck here and I need help to resolve this problem.
I'm a noob and I tried to flash my HTC Touch Pro 2 SPRINT with the Rhodium-HardSPL_V1_10_R3 after reading some threads on how to do that now.
But it didn't work kept on displaying Connection Error.I tried so many times but it didn't work out. Then I tried using the SSPL Manual as alternative.
I extracted and copied it to my device ( can't remember if my device was still plugged to my PC or not) and then ran the program.
My device went blank screen and I waited for some time and it didn't come on ( I waited patiently).
when nothing happened,I then removed the battery and tried hard resetting but it won't still come on.
Now,I cannot synchronized my device with my PC because it kept requesting for driver software for Qualcomm CDMA Technologies MSM (guess it no longer recognized my device) and my phone won't come. So I can't complete the flash.
Please I need help to resolve this problem...I have been a little unfortunate with HTC phones nd I need this to work.
I'm new here and will appreciate the help.
Click to expand...
Click to collapse
the blank screen is fine.
you have a USB driver issue.
reinstall activesync if you are on XP, or windows mobile device center if you are on vista or windows 7.