My HTC Wizard (Cingular 8125) is stuck in the bootloader mode. I had successfully flashed a new rom, and all was well until it started shutting down. After a couple of hard resets with no change, I tried to put it in bootloader mode to flash a downgraded rom. Now I can only get to the bootloader screen and the usb connection is not recognized by the computer or the device. Any suggestions?
sl1p
Cingular 8125 G3
IPL/SPL 2.26
ROM CR86 Touch HD 1.2 (Ezinput)
I have a useless suggestion, just to keep this problem at the top of the list so you find help:
First, try using a different USB port on your computer. Maybe the one you're using fried, or perhaps for some reason the device is just not getting enough powre through it. Try one of the ports on the back of your computer, directly connected to the motherboard. I assume the USB port you're currently using is the one you always use, so this probably won't help at all. But worth a shot.
Also, have you posted this problem in the device specific forum? Someone there might be of more assistance.
Related
Anyone know how to get the phone out of a mode with a blank screen with the words "Serial V1.00" written on it.
I've tried a hard and soft reset on it, and running the upgrade again. No luck
I realise that there's probably a FAQ which covers this, but haven't been able to locate it on this site yet.
thanks in advance!
Thats an indication that it is now in Bootloader mode. You need to re-install the ROM.
UD.
It sounds plausible that I am stuck in bootloader mode. How do I get out of bookloader mode?
Its the USB cable that I'm using to try and flash the device. I've not tried a couple of ROM upgrade programs from different suppliers, but I keep getting a "connection error 101".
thanks in advance
iainh666 said:
It sounds plausible that I am stuck in bootloader mode. How do I get out of bookloader mode?
Its the USB cable that I'm using to try and flash the device. I've not tried a couple of ROM upgrade programs from different suppliers, but I keep getting a "connection error 101".
thanks in advance
Click to expand...
Click to collapse
I think you can find your answer in 50 treats arround here:
Remove all cards (SIM + SD) from your device.
Run the update
Teja
I worked out the problem. I plugged in a different cable, and instantly it switched from serial to USB.
phew!
thanks for all your help.
I have the same problem
can any one explain how to fix it I get USB v1.00
I have the same problem
can any one explain how to fix it I get USB v1.00
Hey,
I have looked everywhere found many tricks and tips, guides, programs, drivers, yet i'm still have problems. I think that it could be problems with my phone. I recently bricked my phone (installed a rom from a different note 2 version and was stuck in a boot loop). Went to go plug in the phone to restore back to stock and the phone wasn't detected. It was a new laptop so i figured it was a driver issue. Installed the drivers still nothing. Long story short I have installed multiple drivers, Note 2 toolkit (mskip big thanks), Samsung Kies, and Odin (all at separate times) all in an attempt to get this phone connected. I have tried 2 different USB cords, different plug-ins, different computers yet still nothing. Now I have gotten my phone back to stock but went to install a new rom and now it wont load past the boot screen. But that was after my trying for a whole day of plugging in and unplugging before 1 time it was connected. I can not understand the issue besides it being my phone. I don't have anything else to try besides plugging it in and out over and over for the 1 time it decides to work and connect. I am getting very frustrated with this because I currently have no phone. Is their a way to tell if the connector is messed up in any way? I'm really needing help because nothing i'm doing is working.
Steepgnomeking said:
Hey,
I have looked everywhere found many tricks and tips, guides, programs, drivers, yet i'm still have problems. I think that it could be problems with my phone. I recently bricked my phone (installed a rom from a different note 2 version and was stuck in a boot loop). Went to go plug in the phone to restore back to stock and the phone wasn't detected. It was a new laptop so i figured it was a driver issue. Installed the drivers still nothing. Long story short I have installed multiple drivers, Note 2 toolkit (mskip big thanks), Samsung Kies, and Odin (all at separate times) all in an attempt to get this phone connected. I have tried 2 different USB cords, different plug-ins, different computers yet still nothing. Now I have gotten my phone back to stock but went to install a new rom and now it wont load past the boot screen. But that was after my trying for a whole day of plugging in and unplugging before 1 time it was connected. I can not understand the issue besides it being my phone. I don't have anything else to try besides plugging it in and out over and over for the 1 time it decides to work and connect. I am getting very frustrated with this because I currently have no phone. Is their a way to tell if the connector is messed up in any way? I'm really needing help because nothing i'm doing is working.
Click to expand...
Click to collapse
Have the same issue. I am trying fr a work computer, internet restricted, no kies. Now can only recognize note 2 as a camera. When I switch thw usb settings in android, I get the not supported box. Same thing happens at the home computer. I left bb for this??
This is a simple hardware fail and needs to be taken in for warranty repair. The fact that it's bricked, we'll you're just gonna have to cross your fingers and hope they don't charge you for a new one.
Or you can try a jig to get it into download mode and try to push a rom through.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Thats what i'm going to do take it in and see if they can fix it but i want to get it back to stock firmware before but not being able to plug it in to update it is kinda ruining that plan.
Well I turned in 3 notes with custom roms that were rooted and I never got charged, but I always run a stockist rom.
What rom did you flash?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Are u able to boot in recovery?
PM me if u need help
Sent from MOON......
Can you boot into recovery? If so then you can push a file to your SD card using adb. If your having problems with Samsung drivers or what ever good way to test is connecting your phone to a Linux box and setting up udev and adb. Then you can do a adb device command and see if it sees it.
If you have the time to install Linux on a extra hard drive or duel boot you can connect using adb.
Nice thing about Linux is that you can connect directly to the USB device using udev and the device id and with ADB you can push a file onto your phones SD card. Here's a good how to
http://esausilva.com/2010/05/13/setting-up-adbusb-drivers-for-android-devices-in-linux-ubuntu/
Sent from my SGH-I317 using xda app-developers app
!!!!Before I tell you anything I couldn't find another thread like this!!!!
HTC One V (Virgin Mobile USA) - Unlocked Bootloader / Rooted
Had a system update, no longer rooted. Bootloader is still unlocked. But my problem is my phone won't realize that its plugged into a computer so I can't root it. It may or may not be my cord, it has a little damage done to it. Yesterday I finally got it to connect to my desktop, I was like yeah! Wen't to my laptop which had the files for rooting, and it wouldn't realize its in a computer. Now it won't do it to my desktop either. Tried rebooting didn't work. Thanks for the help.
Surely you have another cable you could try? Could also be a problem with the USB port of your machine, try using a different port, maybe one that isn't used much
Hi i recently purchase a second hand LG-E971 (locked to rogers and not rooted).
The phone seem to be working at first but whenever
i connect the phone to the computer or charge it on the wall
it goes to "download mode" the only way to exit it is to hold pwr for 8sec.
i got all the driver installed properly in "download mode"
tried to factory reset it with E97110D_00.KDZ and E97110E_00.KDZ
with success but still having the same problem
whenever i plug a usb cable in
i installed the driver for PC
LGUnitedMobileDriver S4981MAN38AP22 ML WHQL Ver 3.8.1.exe
when i connect the phone the driver got installed automatically
but the phone doesnt connect to the PC (win7 i tried 2 different computer) in any mode it is only charging
Is there a KDZ that is already Root with CMW or TWRP that i can factory reset it?
Thank you.
I would contact rogers to get the device checker under waranty.
If you have flashed the original KDZ, you eliminate all software related issue that could've cause this. It must be an hardware issue.
i have same problem. since today whenever i plug the phone to charge it it goes to download mode.
any way to fix it? im on cm but didnt change anything recently
I would suggest to start with cleaning the USB pirt on the phone. Compressed air and a wooden toothpick will help. I had a similar problem with my old SGS2, when dirt in the socket was causing sime weird behaviour.
Worth trying before going to the service centre...
having the same issue as well..i hope there's a possible fix available.
dead thread i know but i have SOME valuable information if you have this phone lying around "dead"ish. i went through a lot of crap trying to revive my dead battery phone and i remembered, i just by chance stumbled upon a "solution" of sorts. it basically is taking out the sim card, turning on the phone WITHOUT the cable, and once it's on i can connect it again. the moment i put in a sim, the damn thing starts flaking out. i'm currently using solidkernel 1.95 gproj with cm 12.0 official nightly 10/16(2015). this had happened to me like a month and a half ago or so as well. ANYWAY, it's either a radio thing, a kernel thing, a rom thing, or a combination of the three. that would NOT explain why the phone assumes download mode has been invoked, especially given it should only happen through a special pre-boot procedure using buttons (two no less). still, it is possible that my sim slot is too dirty, or my sim itself is problematic? i don't know. what do you guys think?
Hi, Need pointing into right direction. I use my note in the uk and tried flashing different roms, modems etc to get LTE to work. It stopped connecting to my laptop at some point but I continued to flash cutom roms using recovery. I then tried the Odin app (by Chainfire) to flash stock Tmo F1 rom. I had been on NE6 prior to me trying custom roms.
Problem is that the flash failed (when rebooting itself) and is now in a bootloop and I can't get into recovery either. Download mode comes up but it does not connect to the Laptop. I have tried Odin, Kies, reinstalled drivers but no luck. If I connect directly to the laptop the phone does not come up but if I go through a USB hub it recognises something been plugged in but fails to install driver.
Now i know i've messed up but was hoping if there is anyway I could use the sdcard to help boot the phone maybe into recovery or somehow get laptop to recognise the phone???
Any help would be appreciated as I did enjoy the phone and have spent not days but weeks on this problem and the Mrs aint to happy either...thx...
Your current problem is drivers. Get that fixed, I can't help much as I don't run Windows often. Perhaps a boot disc with Linux/Heimdall might help... Lose Kies, it can't help you right now and it might have messed up your drivers, uninstall it and reboot. You need Odin. And not the app, the real one on a PC.
If you have an N900T, the Tmobile NF1 is the one you want. Try the Effortless guide in the general forum for detailed directions and good files to work from. If you can boot to download mode but Odin can't see it, the drivers are messed up on your computer. It's not the phone that has an issue. Try a different computer if you can. The Samsung drivers can be a bit picky. You might need to go to Device Manager and uninstall the drivers while the phone is connected, disconnect and reboot, then try to install the proper ones again.
And if you're in an LTE area, you should connect without any changes. Trying to force it is a bad idea as you probably don't have a network to connect to.
Thanks. Did cross my mind about the driver issue but my S3 connects to the laptop fine. Or do you suggest I give the Linux a try?
Also would the lte bands works here in the uk considering it been a us tmobile?
Tried linux/heimdall but still doesn't connect to my laptop. Don't know what it could be. Any ideas please guys.
UPDATE.....resolved by replacing USB charge port as a pin was damaged/broken.