Anyone know how to get the phone out of a mode with a blank screen with the words "Serial V1.00" written on it.
I've tried a hard and soft reset on it, and running the upgrade again. No luck
I realise that there's probably a FAQ which covers this, but haven't been able to locate it on this site yet.
thanks in advance!
Thats an indication that it is now in Bootloader mode. You need to re-install the ROM.
UD.
It sounds plausible that I am stuck in bootloader mode. How do I get out of bookloader mode?
Its the USB cable that I'm using to try and flash the device. I've not tried a couple of ROM upgrade programs from different suppliers, but I keep getting a "connection error 101".
thanks in advance
iainh666 said:
It sounds plausible that I am stuck in bootloader mode. How do I get out of bookloader mode?
Its the USB cable that I'm using to try and flash the device. I've not tried a couple of ROM upgrade programs from different suppliers, but I keep getting a "connection error 101".
thanks in advance
Click to expand...
Click to collapse
I think you can find your answer in 50 treats arround here:
Remove all cards (SIM + SD) from your device.
Run the update
Teja
I worked out the problem. I plugged in a different cable, and instantly it switched from serial to USB.
phew!
thanks for all your help.
I have the same problem
can any one explain how to fix it I get USB v1.00
I have the same problem
can any one explain how to fix it I get USB v1.00
Related
I was trying to upgrade my XDA IIs using my card reader but when I run the file named GetBL my XDA went off and it displays "serial" at the top and "v2.07 at the bottom. How can I put everything back to normal? Is there anyone in the Philippines that could help me? Thanx...
did you try hard reset?
Yes I did but nothing happened. Will you give me a hand on this. Is there any other way to put it all back? Thanx....
dude we have the same prob ill tell u wat 2 du if i fixed it...have u tried gh?
I haven't tried it dude. What's gh dude? Will you give me a hand on this. I can't figure out what's the problem. Thanx...
gh=greenhills
do you have a usb cable?is your BA still detected by the computer when plugged using the usb cable?
I haven't tried it yet but I have a cradle and usb. But what if it's detected. What should I do? What will I also do if it's not detected. Thanx
villain08 said:
I haven't tried it yet but I have a cradle and usb. But what if it's detected. What should I do? What will I also do if it's not detected. Thanx
Click to expand...
Click to collapse
if it gets detected.. there'll be another question
does it still enter BL (bootloader mode)? haven't been playing with my BA for a long time now, that i have already forgotten how to enter BL mode..
anyway.. if it still enters BL mode.. there may still be a lot of chance reviving it..
AW! i was not able to read the very first post carefully.. you are in the BL or bootloader mode.. to return to normal phone, just reset your device (poke the reset hole at the bottom) or remove the battery, replace it, then hit the power button..
getBL or enterBL is a program that resets your device and lets it enter BL (bootloader) mode.. you need to be in the bootloader mode to be able to flash new/upgrade ROMs..
anyway.. there is a more easier and safer/faster way of flashing roms that does not include the use of the memory card technique.. you only need the USB cable/cradle, your ROM and the RUU (upgrade utility) which will be run on the desktop pc.
where are you located in the phils? maybe i can help you..
I wanted to upgrade ranju wm6.
Something went wrong and now my device will not start up.
In bootloader mode I can see Serial v1.01
I tried the MTTY (1.6), but can't see a USB port. Even after killing m........exe on host PC.
That only adds an additional port(not comm), but still no USB port.
Therefor can't execute: set 14 0
Please help!!!!!
Would like to go back to WM5 (qtek rom)
Best regards
Exactly the same problem
Hi Guys ,
I got exactly the same problem. Stuck in the bootloader and nothing works anymore. Not even the MTTY tool....
Hopefully someone could help us.
cheers
jurjen
Same Here..
Stuck in bootloader screen after upgrading to ranju's 7.7
that makes three of us.
When I try to enter bootloader is asks me to enter 0 to hard reset?
!
I also got stuck the same way.
solutions given are not working! any other solution?
Same here,
Maybe i've overlooked the universal version.
I understood that the ranju 7.7 is only for the G3 and G4.
Aperently there are more versions of the universal. Where is the version number on my universal? I bought mine as the qtek 9000.
How do you flash the universal when it doesn't boot anymore?
Thnx
Trying to solve the problem I found this:
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
My device seems to have been fixed.
After flashing Ranju 7.7 it took 6 times to align the screen but it is working now.
I will report here if anything terrible has happend , so far so good
Nope
It's not working! All tried...
USB device not recoganised! so first two steps are out!
3rd not working
checked another (correct) Universal
Hi Guys,
indeed I haven't been able to select the USB port in the MTTY tool. But when I try my old phone - a working universal (with broken sound) - I neither make contact with the USB port. So could it be that my laptop has something wrong?
cheers
Jurjen
Hi
Just using the original cable and on another computer it worked
difference between Cables
Hi ,
good to hear that you have fixed your universal. What is the main difference between the original cable and a normal usb cable. And how do I recognise both?
Hope to unbrick mines soon.
cheers
Finally it worked
Hi all,
Indeed when using another cable I got my dearest universal back.
So indeed using another cable can help a lot.
Thanks for all your suggestions.
cheers
Jurjen
My HTC Wizard (Cingular 8125) is stuck in the bootloader mode. I had successfully flashed a new rom, and all was well until it started shutting down. After a couple of hard resets with no change, I tried to put it in bootloader mode to flash a downgraded rom. Now I can only get to the bootloader screen and the usb connection is not recognized by the computer or the device. Any suggestions?
sl1p
Cingular 8125 G3
IPL/SPL 2.26
ROM CR86 Touch HD 1.2 (Ezinput)
I have a useless suggestion, just to keep this problem at the top of the list so you find help:
First, try using a different USB port on your computer. Maybe the one you're using fried, or perhaps for some reason the device is just not getting enough powre through it. Try one of the ports on the back of your computer, directly connected to the motherboard. I assume the USB port you're currently using is the one you always use, so this probably won't help at all. But worth a shot.
Also, have you posted this problem in the device specific forum? Someone there might be of more assistance.
Hi there! First of all I don't speak english very well.
My Galaxy Nexus hard bricked yesterday.
tl;dr no boot animation, no recovery mode, no download mode, no response from computer.
I thought it had just a low battery level, I found it turned off. So I tried to recharge it but it gave no signals, no battery icon, nothing.
After an all night long recharge I tried to turn it on, to enter in download mode or in recovery mode but nothing works. I also tried to connect it with my computer with and without battery, no response, no "OMAP" device found, no sound from Windows for plugging it in, nothing.
I found this thread here in xda, many people has been redirected to it and found their solution to the brick problem.
I tried to follow all the steps but when I plug in the phone and start the .bat file nothing happens, just stuck on "Waiting for device".
The phone is unlocked and rooted. I'm running AOKP JB-MR1 Build 2 and Franco Kernel for a month, never had problems with them, never installed other ROMs after that.
What should I do now? Should I try to do something or just bring it to a support center? The phone is still in warranty, there would be any problem because it has a non-stock ROM?
I've red about a jig to force the Odin mode, should I buy it? (I found this one)
Thanks for the help.
Have you tried booting into Odin mode
ntb81 said:
Have you tried booting into Odin mode
Click to expand...
Click to collapse
Yes, it doesn't work.
have you your warranty on it?
return it and get a new one
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Beauenheim said:
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
Click to expand...
Click to collapse
Yeah, that's why I'm not sure to send it in for warranty. So have I to try with a JTAG first?
[bman123] said:
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Click to expand...
Click to collapse
I'm not understanding that too, I don't know what happened. Suddendly it stopped working. Maybe is just a battery problem, I'll try to use another one before bringing it to the shop where I bought it.
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
---------- Post added at 06:12 AM ---------- Previous post was at 06:02 AM ----------
galiganu said:
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
Click to expand...
Click to collapse
so right after I wrote that I plugged my phone into USB of my PC without battery. when I inserted the battery it started showing me the battery sign and I could started the phone. 3 minutes later it went black again, but the trick didnt work again.
any ideas? thanks
Try This !!
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Tech.Nik said:
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Click to expand...
Click to collapse
Please could you explain a bit more how to go about this? I have a Verizon Galaxy Nexus in a somewhat similar condition. This one is recognised as an OMAP 4430 device. I downloaded OMAP Flasher, installed drivers and tried to bring it back to life but after running the batch file I get this error: Operation FAILED (Remote: : Driver init error 0x00FF8080 - MMC CONFIG FAILURE). Can the resistor trick work on this and if yes, how can I go about it? I am not faint-hearted; I think I can handle it if given the right instructions.
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
galiganu said:
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
Click to expand...
Click to collapse
Yeah, the faulty USB port is a very common issue.
I tried to use a volume fix by changing the values in some system files on my rooted G3, rebooted and got stuck at the LG Bootlogo. Been trying lots of things, finally used this thread: http://forum.xda-developers.com/showthread.php?t=2799647 but the flash tool fails at 14 seconds saying failure to enter download mode. I have a D851C on T-Mobile, it is in download mode when I run the program and no change occurs on the screen save for the text log at the bottom. Upon booting into DL mode, it says USER B94. After unplugging and plugging it back in to start the unroot it changes to USER S0.0 AS0.0 B94 UHS then on the next line S U LG-D851 04.4.2 Hrev_10 and the next D85110c. It takes a good 50 seconds for the flash tool to change from saying awaiting connection, and then at 14 seconds it looks like the photo. The names of the dll and tot I am using are, respectively:
LGD851_20140611_LGFLASHv160
LGD851AT-01-V10c-310-260-JUN-20-2014+0
Yes I have set the port to 41 in device manager.
What the heck is wrong?
Someone please help I was supposed to fly out of state today but now I don't think I can without a phone and I can't afford a new one, I'm a student
Did you put your phone in download mode? It's not broken you just need to successfully flash it. It says download mode failed so here's a simple way to enable it if you ate having trouble. Pull out the battery then hold volume down and put it back it and plug in the cable. This should be done in a relatively fast manner to enable it if you are having issues getting into download mode.
Edit I know you said you put it in DL mode but I had a similar issue with my F400S so its worth a try.
Pilz said:
Did you put your phone in download mode? It's not broken you just need to successfully flash it. It says download mode failed so here's a simple way to enable it if you ate having trouble. Pull out the battery then hold volume down and put it back it and plug in the cable. This should be done in a relatively fast manner to enable it if you are having issues getting into download mode.
Edit I know you said you put it in DL mode but I had a similar issue with my F400S so its worth a try.
Click to expand...
Click to collapse
I tried it, same error at 14 seconds. Tried taking the battery out after the yellow ready button comes up to and doing it that way, nada
Did you try using LG PC Suite --> Tools --> Fix Upgrade Problems?
The steps can have different names (didn't remember the names) but something like that, worked for me when I messed up my system
kvanzuijlen said:
Did you try using LG PC Suite --> Tools --> Fix Upgrade Problems?
The steps can have different names (didn't remember the names) but something like that, worked for me when I messed up my system
Click to expand...
Click to collapse
LG PC Suite didn't recognize it before, does it need to be in download mode when I do that? Or is there another recovery mode?
*EDIT* Just discovered this log, maybe someone's familiar with the codes and has an idea what to do
Bump please help I don't want to use a warranty claim
Bump
DrPhill94 said:
Bump
Click to expand...
Click to collapse
I may have found the solution for another member, but it is untested from me, as I am at work at the moment. In flashtool did you change the action mode? if not try changing the action mode to board dl instead of what its set to. Let me know, because I got the same issue right now.
joeyhdownsouth said:
I may have found the solution for another member, but it is untested from me, as I am at work at the moment. In flashtool did you change the action mode? if not try changing the action mode to board dl instead of what its set to. Let me know, because I got the same issue right now.
Click to expand...
Click to collapse
Tried it a few times, no luck so far. Same error same time
DrPhill94 said:
Tried it a few times, no luck so far. Same error same time
Click to expand...
Click to collapse
damn, I'm on Sprint variant, only thing I haven't tried is lg suite and making sure my Flashtool is the latest version. I've tried everything else last night for 6 hours.
edit: my dl mode is working perfect. I see in your Flashtool, your error is slightly different. mine gets stuck at 93%. Then it reboots back to this
DrPhill94 said:
LG PC Suite didn't recognize it before, does it need to be in download mode when I do that? Or is there another recovery mode?
*EDIT* Just discovered this log, maybe someone's familiar with the codes and has an idea what to do
Click to expand...
Click to collapse
PC Suite won't recognize it if you don't use the correct version. The latest from LG's site is in fact the wrong version. You need the version that's about 223mb in size. Sorry, I'm not sure of the version and am currently busy fixing my phone with it, so can't check. Perhaps someone would kindly supply you with a download link.
Beylie said:
PC Suite won't recognize it if you don't use the correct version. The latest from LG's site is in fact the wrong version. You need the version that's about 223mb in size. Sorry, I'm not sure of the version and am currently busy fixing my phone with it, so can't check. Perhaps someone would kindly supply you with a download link.
Click to expand...
Click to collapse
Will it work even if my phone doesn't show up in explorer? My pc makes a sound when it is plugged in and unplugged in Download Mode but the only thing so far to recognize it is flash tool. If you can check the version please let me know but I'll look for it
Did you try a different USB port on your computer? Drivers get honked up easily using flashing tools and sometimes using a different port, or even a different USB cable can fix your problem. More likely another usb port, but I've also had a bad cable as well.
Ozark_8125 said:
Did you try a different USB port on your computer? Drivers get honked up easily using flashing tools and sometimes using a different port, or even a different USB cable can fix your problem. More likely another usb port, but I've also had a bad cable as well.
Click to expand...
Click to collapse
That's the problem is the only cable that works is the one that came with it, and I've used 3 of my 4 on my laptop, so I doubt it's the port
Ozark_8125 said:
Did you try a different USB port on your computer? Drivers get honked up easily using flashing tools and sometimes using a different port, or even a different USB cable can fix your problem. More likely another usb port, but I've also had a bad cable as well.
Click to expand...
Click to collapse
Also you have to realize the phone doesn't turn on. I get the LG logo, download mode, or factory reset. That's it
If that is the only cable that works - my guess is there's something probably wrong with the micro usb jack on your phone.. it shouldn't be that finicky where only 1 of 4 cables would work. If you do a warranty return, you might get lucky anyways. Several folks have posted on XDA that the stores where they returned phones were either clueless or didn't care about the status of the root code. Of course, YMMV.
Ozark_8125 said:
If that is the only cable that works - my guess is there's something probably wrong with the micro usb jack on your phone.. it shouldn't be that finicky where only 1 of 4 cables would work. If you do a warranty return, you might get lucky anyways. Several folks have posted on XDA that the stores where they returned phones were either clueless or didn't care about the status of the root code. Of course, YMMV.
Click to expand...
Click to collapse
You misunderstand: The cable that comes with the G3 is the only one GUARANTEED to work with these operations. Has nothing to do with the jack. Getting a new one in the mail tomorrow, can't tell if it's rooted if they can't access the filesystem