I tried to use a volume fix by changing the values in some system files on my rooted G3, rebooted and got stuck at the LG Bootlogo. Been trying lots of things, finally used this thread: http://forum.xda-developers.com/showthread.php?t=2799647 but the flash tool fails at 14 seconds saying failure to enter download mode. I have a D851C on T-Mobile, it is in download mode when I run the program and no change occurs on the screen save for the text log at the bottom. Upon booting into DL mode, it says USER B94. After unplugging and plugging it back in to start the unroot it changes to USER S0.0 AS0.0 B94 UHS then on the next line S U LG-D851 04.4.2 Hrev_10 and the next D85110c. It takes a good 50 seconds for the flash tool to change from saying awaiting connection, and then at 14 seconds it looks like the photo. The names of the dll and tot I am using are, respectively:
LGD851_20140611_LGFLASHv160
LGD851AT-01-V10c-310-260-JUN-20-2014+0
Yes I have set the port to 41 in device manager.
What the heck is wrong?
Someone please help I was supposed to fly out of state today but now I don't think I can without a phone and I can't afford a new one, I'm a student
Did you put your phone in download mode? It's not broken you just need to successfully flash it. It says download mode failed so here's a simple way to enable it if you ate having trouble. Pull out the battery then hold volume down and put it back it and plug in the cable. This should be done in a relatively fast manner to enable it if you are having issues getting into download mode.
Edit I know you said you put it in DL mode but I had a similar issue with my F400S so its worth a try.
Pilz said:
Did you put your phone in download mode? It's not broken you just need to successfully flash it. It says download mode failed so here's a simple way to enable it if you ate having trouble. Pull out the battery then hold volume down and put it back it and plug in the cable. This should be done in a relatively fast manner to enable it if you are having issues getting into download mode.
Edit I know you said you put it in DL mode but I had a similar issue with my F400S so its worth a try.
Click to expand...
Click to collapse
I tried it, same error at 14 seconds. Tried taking the battery out after the yellow ready button comes up to and doing it that way, nada
Did you try using LG PC Suite --> Tools --> Fix Upgrade Problems?
The steps can have different names (didn't remember the names) but something like that, worked for me when I messed up my system
kvanzuijlen said:
Did you try using LG PC Suite --> Tools --> Fix Upgrade Problems?
The steps can have different names (didn't remember the names) but something like that, worked for me when I messed up my system
Click to expand...
Click to collapse
LG PC Suite didn't recognize it before, does it need to be in download mode when I do that? Or is there another recovery mode?
*EDIT* Just discovered this log, maybe someone's familiar with the codes and has an idea what to do
Bump please help I don't want to use a warranty claim
Bump
DrPhill94 said:
Bump
Click to expand...
Click to collapse
I may have found the solution for another member, but it is untested from me, as I am at work at the moment. In flashtool did you change the action mode? if not try changing the action mode to board dl instead of what its set to. Let me know, because I got the same issue right now.
joeyhdownsouth said:
I may have found the solution for another member, but it is untested from me, as I am at work at the moment. In flashtool did you change the action mode? if not try changing the action mode to board dl instead of what its set to. Let me know, because I got the same issue right now.
Click to expand...
Click to collapse
Tried it a few times, no luck so far. Same error same time
DrPhill94 said:
Tried it a few times, no luck so far. Same error same time
Click to expand...
Click to collapse
damn, I'm on Sprint variant, only thing I haven't tried is lg suite and making sure my Flashtool is the latest version. I've tried everything else last night for 6 hours.
edit: my dl mode is working perfect. I see in your Flashtool, your error is slightly different. mine gets stuck at 93%. Then it reboots back to this
DrPhill94 said:
LG PC Suite didn't recognize it before, does it need to be in download mode when I do that? Or is there another recovery mode?
*EDIT* Just discovered this log, maybe someone's familiar with the codes and has an idea what to do
Click to expand...
Click to collapse
PC Suite won't recognize it if you don't use the correct version. The latest from LG's site is in fact the wrong version. You need the version that's about 223mb in size. Sorry, I'm not sure of the version and am currently busy fixing my phone with it, so can't check. Perhaps someone would kindly supply you with a download link.
Beylie said:
PC Suite won't recognize it if you don't use the correct version. The latest from LG's site is in fact the wrong version. You need the version that's about 223mb in size. Sorry, I'm not sure of the version and am currently busy fixing my phone with it, so can't check. Perhaps someone would kindly supply you with a download link.
Click to expand...
Click to collapse
Will it work even if my phone doesn't show up in explorer? My pc makes a sound when it is plugged in and unplugged in Download Mode but the only thing so far to recognize it is flash tool. If you can check the version please let me know but I'll look for it
Did you try a different USB port on your computer? Drivers get honked up easily using flashing tools and sometimes using a different port, or even a different USB cable can fix your problem. More likely another usb port, but I've also had a bad cable as well.
Ozark_8125 said:
Did you try a different USB port on your computer? Drivers get honked up easily using flashing tools and sometimes using a different port, or even a different USB cable can fix your problem. More likely another usb port, but I've also had a bad cable as well.
Click to expand...
Click to collapse
That's the problem is the only cable that works is the one that came with it, and I've used 3 of my 4 on my laptop, so I doubt it's the port
Ozark_8125 said:
Did you try a different USB port on your computer? Drivers get honked up easily using flashing tools and sometimes using a different port, or even a different USB cable can fix your problem. More likely another usb port, but I've also had a bad cable as well.
Click to expand...
Click to collapse
Also you have to realize the phone doesn't turn on. I get the LG logo, download mode, or factory reset. That's it
If that is the only cable that works - my guess is there's something probably wrong with the micro usb jack on your phone.. it shouldn't be that finicky where only 1 of 4 cables would work. If you do a warranty return, you might get lucky anyways. Several folks have posted on XDA that the stores where they returned phones were either clueless or didn't care about the status of the root code. Of course, YMMV.
Ozark_8125 said:
If that is the only cable that works - my guess is there's something probably wrong with the micro usb jack on your phone.. it shouldn't be that finicky where only 1 of 4 cables would work. If you do a warranty return, you might get lucky anyways. Several folks have posted on XDA that the stores where they returned phones were either clueless or didn't care about the status of the root code. Of course, YMMV.
Click to expand...
Click to collapse
You misunderstand: The cable that comes with the G3 is the only one GUARANTEED to work with these operations. Has nothing to do with the jack. Getting a new one in the mail tomorrow, can't tell if it's rooted if they can't access the filesystem
Related
Hi there! First of all I don't speak english very well.
My Galaxy Nexus hard bricked yesterday.
tl;dr no boot animation, no recovery mode, no download mode, no response from computer.
I thought it had just a low battery level, I found it turned off. So I tried to recharge it but it gave no signals, no battery icon, nothing.
After an all night long recharge I tried to turn it on, to enter in download mode or in recovery mode but nothing works. I also tried to connect it with my computer with and without battery, no response, no "OMAP" device found, no sound from Windows for plugging it in, nothing.
I found this thread here in xda, many people has been redirected to it and found their solution to the brick problem.
I tried to follow all the steps but when I plug in the phone and start the .bat file nothing happens, just stuck on "Waiting for device".
The phone is unlocked and rooted. I'm running AOKP JB-MR1 Build 2 and Franco Kernel for a month, never had problems with them, never installed other ROMs after that.
What should I do now? Should I try to do something or just bring it to a support center? The phone is still in warranty, there would be any problem because it has a non-stock ROM?
I've red about a jig to force the Odin mode, should I buy it? (I found this one)
Thanks for the help.
Have you tried booting into Odin mode
ntb81 said:
Have you tried booting into Odin mode
Click to expand...
Click to collapse
Yes, it doesn't work.
have you your warranty on it?
return it and get a new one
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Beauenheim said:
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
Click to expand...
Click to collapse
Yeah, that's why I'm not sure to send it in for warranty. So have I to try with a JTAG first?
[bman123] said:
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Click to expand...
Click to collapse
I'm not understanding that too, I don't know what happened. Suddendly it stopped working. Maybe is just a battery problem, I'll try to use another one before bringing it to the shop where I bought it.
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
---------- Post added at 06:12 AM ---------- Previous post was at 06:02 AM ----------
galiganu said:
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
Click to expand...
Click to collapse
so right after I wrote that I plugged my phone into USB of my PC without battery. when I inserted the battery it started showing me the battery sign and I could started the phone. 3 minutes later it went black again, but the trick didnt work again.
any ideas? thanks
Try This !!
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Tech.Nik said:
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Click to expand...
Click to collapse
Please could you explain a bit more how to go about this? I have a Verizon Galaxy Nexus in a somewhat similar condition. This one is recognised as an OMAP 4430 device. I downloaded OMAP Flasher, installed drivers and tried to bring it back to life but after running the batch file I get this error: Operation FAILED (Remote: : Driver init error 0x00FF8080 - MMC CONFIG FAILURE). Can the resistor trick work on this and if yes, how can I go about it? I am not faint-hearted; I think I can handle it if given the right instructions.
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
galiganu said:
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
Click to expand...
Click to collapse
Yeah, the faulty USB port is a very common issue.
Dear All,
I have encountered a problem with my note 2 that unfortunately closes a lot of doors for me to fix. I thought about asking you guys and hopefully this has not been asked before. Ok so my problem is that I had rooted phone ages ago and i had SuperSU installed with the root. Later on some official update came out and I let it update. After that I might have lost my root there and then not sure though. When I try to do something in root it won't let me, also it fails when trying to change super user app. What is killing me mostly is that any computer I connect using different cables, won't recognise my phone, as if it was not even connected although it charges normally. At first it was sometimes charging and not, sometimes freezing if connected to the USB. It might be hardware related but I want to try to fix this issue first to be sure. I can't even use Odin since it's not being detected so unrooting and going back to the seller is out of question.
Can anyone help me please? I am thinking of trying custom firmware through sdcard installation but i cant even install CWM and when using official recovery the package is not accepted. (signature issues). There may be some easy workaround I do not know of hence me asking you experienced guys.
Big thanks for reading this and hopefully helping me.
joshua
So you mean odin is not detecting phone in download mode ?
Try connecting the phone and see if adb works but I don't really think it would work. Try another cable. Could be that usb port is damaged.
Try another recovery.
Sent from my GT-N7100
UtkarshGupta said:
So you mean odin is not detecting phone in download mode ?
Try connecting the phone and see if adb works but I don't really think it would work. Try another cable. Could be that usb port is damaged.
Try another recovery.
Sent from my GT-N7100
Click to expand...
Click to collapse
No, Odin is not detecting the phone although it starts charging like normal. I will check adb later tonight when I am on my home pc. I have tried in total 4 different cables same result. I have used 3 different operating systems on different computers, still not detected. Usb port might be damaged but I don't think they will be happy seeing its rooted.(they being the store i bought it from, that is why I have not gone to them yet.
I have a similar issue since 4.1.2 however my phone is recognized by computer and odin in download mode, are you sure you tried it on download mode?
yudodis said:
I have a similar issue since 4.1.2 however my phone is recognized by computer and odin in download mode, are you sure you tried it on download mode?
Click to expand...
Click to collapse
Yes I have tried download mode, that's why this problem is killing me :/ The root access is completely unusable and not working too.
Hello, I purchased a phone off kijiji fully knowing it was not functional - For the 40 dollars my curiosity got the best of me; and if I can fix it well I can get myself a new phone for cheap. I was informed that this phone: Samsung Galaxy sgh-i747m had the latest update (not custom rom). The phone suddenly would not boot past Samsung logo and by the time I bought it, would not boot up at all. So after doing extensive research I decided I would give the 16gb class 10 sd card boot a chance. While somewhat of a success, the only thing it boots me to is this.
BOOT RECOVERY MODE (IN GREEN)
CHECK BOOT PARTITIONS
COPY FROM T-FLASH
BOOT RECOVERY
WRITE 159488 SECTORS
FLASH WRITE FAILURE (RED)
ODIN MODE (RED)
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: NONE
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 0
BOOTLOADER AP SWERV: 1
I should note that with the debrick-SGH-I747M-UEMK5 image that I used, the phone will boot to recovery mode without holding any buttons(While Plugged in). It will also boot to recovery if it is unplugged and I simply hold and release the power button when I feel the vibrate. I have also tried volume down + home + power. Same thing. If I take the sd card out I cannot get any sign of life / no recovery mode.
The computer does not see the device at all, even in device manager as a random name. There are no signs of life on the computer end. ODIN also does not detect it even when in boot recovery mode. Will not boot to download mode. A red light comes on if I pull the battery out and plug in the usb cable.
Do you have access to a USB jig to see if you can get into download mode?
audit13 said:
Do you have access to a USB jig to see if you can get into download mode?
Click to expand...
Click to collapse
No, I was contemplating making one or ordering one online but was unsure if that would make any difference. But I am willing to try anything even if there is a slight possibility it could work.
Where are you located? I recall seeing a thread on XDA about people that has a USB job for use by other XDA members.
audit13 said:
Where are you located? I recall seeing a thread on XDA about people that has a USB job for use by other XDA members.
Click to expand...
Click to collapse
I am in Thunder Bay, ON
I'm in Toronto which doesn't help you right now. Maybe order a USB jib and see what happens.
If you decide to sell the phone, let me know as I need to try and repair a phone that has a defective lcd and digitizer.
audit13 said:
I'm in Toronto which doesn't help you right now. Maybe order a USB jib and see what happens.
If you decide to sell the phone, let me know as I need to try and repair a phone that has a defective lcd and digitizer.
Click to expand...
Click to collapse
Will do. Going to build jig today and test it out
Another solution may be to have the firmware flashed via jtag.
You should be able to flash with Odin from there if I'm not mistaken. (Been a long time since I've been through this part myself). You may need to try different drivers, different cables, usb ports, etc.
audit13 said:
Another solution may be to have the firmware flashed via jtag.
Click to expand...
Click to collapse
Yea I didn't want to have to go that route if possible as my goal was to gain experience and knowledge from this little project. If I got the phone working then I would just replace my old Samsung infuse. I made the USB Jig using the 301K ohm's and it still does not work. I know the jig works because I tested it on my wife sgh-i747m and also on my infuse. Both of which boot into download mode immediately. My concern is there is something wrong with the main board because it really doesn't seem like it was rooted at all.
I am just going to see what I can get for it at this point, I paid 70 so would be looking to get at least 60
DocHoliday77 said:
You should be able to flash with Odin from there if I'm not mistaken. (Been a long time since I've been through this part myself). You may need to try different drivers, different cables, usb ports, etc.
Click to expand...
Click to collapse
I have tried 5 different cords, and two different computers on all usb ports. Nothing
You said it'll boot recovery, is it stock or a custom one? Also, are you familiar with ADB?
When you plug it into the computer, is it detected by odin? If so, what does it say in the message box when you try to flash?
Look in device manager too. What does it detect the device as?
gravitysdepth said:
Yea I didn't want to have to go that route if possible as my goal was to gain experience and knowledge from this little project. If I got the phone working then I would just replace my old Samsung infuse. I made the USB Jig using the 301K ohm's and it still does not work. I know the jig works because I tested it on my wife sgh-i747m and also on my infuse. Both of which boot into download mode immediately. My concern is there is something wrong with the main board because it really doesn't seem like it was rooted at all.
I am just going to see what I can get for it at this point, I paid 70 so would be looking to get at least 60
Click to expand...
Click to collapse
Hi,
Send me a message of you want to sell your s3.
Cheers.
I have an SGH-i747m and I'm having the same problem. Was a solution ever found?
Black Adam said:
I have an SGH-i747m and I'm having the same problem. Was a solution ever found?
Click to expand...
Click to collapse
You have the Canadian version of the s3? Will you phone boot into download mode without the sd card installed?
Sorry, I have the SGH-i747. The phone only boots with the SD card and just stays in download mode. Odin doesn't recognize it.
Black Adam said:
Sorry, I have the SGH-i747. The phone only boots with the SD card and just stays in download mode. Odin doesn't recognize it.
Click to expand...
Click to collapse
What was the last stock ATT ROM on the phone? Can the phone boot into download mode without the external SD card?
When you connect the phone to you computer in download mode, are you prompted to install drivers? If you are using Windows, any unrecognized devices in device manager?
And don't forget to try different cables and every USB port on the computer. Cables go bad much more easily than most people think, and many charging cables cannot be used for data transfer.
I've seen a number of times where people found that only one of the USB ports would allow it to connect.
You might also want to try several different driver versions. (I'd start with the oldest that was release along with the S3.) You can find several in the link in my signature.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Sorry If this is covered somewhere else but I've tried a number of search queries and haven't found anything.
My issue is that I have a rooted verizon LGG4 that has started acting up quite a bit. I would like to flash back to a stock kdz but because of the glitches with the current software my PC will not recognize the phone. I have used different usb cords and even had the port itself checked out and the tech said there was nothing wrong with it that he could tell. So I believe the issue is with the software. Is there anyway to flash the phone back with out a PC?
Thanks
Fracjunky said:
Sorry If this is covered somewhere else but I've tried a number of search queries and haven't found anything.
My issue is that I have a rooted verizon LGG4 that has started acting up quite a bit. I would like to flash back to a stock kdz but because of the glitches with the current software my PC will not recognize the phone. I have used different usb cords and even had the port itself checked out and the tech said there was nothing wrong with it that he could tell. So I believe the issue is with the software. Is there anyway to flash the phone back with out a PC?
Thanks
Click to expand...
Click to collapse
KDZ you need pc.. maybe format or try another PC.
I have tried 2 different PC's. None of them work with this phone but all work with another G4 no problem. I do have access to img and bin files but I'm still not sure how I could use them as all I have ever used to flash is LGUP on my PC and the C promt. If i could just figure out something to fix the USB issue I'd have it made otherwise I need to figure out a way to flash from the phone itself.
Have you tried lgup it is good for these types of issues.....
When I had issues I found that with lgup he best way is leave your device plugged in and pull the battery out and problem solved.....
9
Fracjunky said:
Sorry If this is covered somewhere else but I've tried a number of search queries and haven't found anything.
My issue is that I have a rooted verizon LGG4 that has started acting up quite a bit. I would like to flash back to a stock kdz but because of the glitches with the current software my PC will not recognize the phone. I have used different usb cords and even had the port itself checked out and the tech said there was nothing wrong with it that he could tell. So I believe the issue is with the software. Is there anyway to flash the phone back with out a PC?
Thanks
Click to expand...
Click to collapse
Does ure pc reconize device at all. Whats it say in device manager.
Have u checked your drivers?
I use the old lgflash tool from lg g2. Also works great for messed up situations.
Also have you tried booting in download mode to see if its reconized. Bad firmware shouldnt affect dl mode connections
LGUp is actually the program I prefer to use and it can't find my device any longer.
The PC will charge the phone and that's it. Current drivers and all but still says unrecognized device in the device manager. I have a couple of g4s that work just fine I might just start overwriting system files with working ones from the other devices until I figure out which one is corrupted.
Fracjunky said:
LGUp is actually the program I prefer to use and it can't find my device any longer.
The PC will charge the phone and that's it. Current drivers and all but still says unrecognized device in the device manager. I have a couple of g4s that work just fine I might just start overwriting system files with working ones from the other devices until I figure out which one is corrupted.
Click to expand...
Click to collapse
Try FlashFire from playstore. It can flash from within android. Never used it though..
And sorry to ask this but have you tried to change the connection mode (swipe down and change to ptp)?
.
Sent from my LG-H815 using XDA Labs
I was doing some experiment with DriveDroid and now I am in big mess.
I think I messed up with drivedroid settings and I was not able to see my phone (oneplus 3 rooted LOS 15.1 ) on my computers.
I have tried different computers but all cant detect my phone.
I have tried drivedroid wizard, different usb systems, different usb settings and no luck.
I have tried uninstalling the drivedroid and still no luck.
The phone was going in charging mode only. Its was not going to MTP mode so I can see the phone internal storage in computer
I have tried to do factory reset also but no luck.
Now I mistakenly wiped data partition also and now the phone is with
No OS
No USB detection on phone while in TWRP
No OTG detection
No any ROM.zip file in phone memory.
When I am on TWRP and connect my phone in computer I am seeing same error message and cant see my phone interenal storage.
Now what to do? Any way to flash ROM ?
I am in big mess, and I dont want to spend money on new phone as of now
I hope someone will be my angle and suggest me something to recover and save me from this mess...
Crying out loud now...
Hi, i think you can use adb sideload with twrp
Uruloki64 said:
Hi, i think you can use adb sideload with twrp
Click to expand...
Click to collapse
Phone is not recognized in computer while in twrp mode so it is not able to connct to adb via USB.
Just get os flashed at OnePlus service center.
I did something same in my previous Samsung phone. I took it to service center and told em that it's not booting up and I don't know the reason. They flashed the firmware from scratch, charged me 250 INR and my phone was back to being normal.
aj141 said:
Just get os flashed at OnePlus service center.
I did something same in my previous Samsung phone. I took it to service center and told em that it's not booting up and I don't know the reason. They flashed the firmware from scratch, charged me 250 INR and my phone was back to being normal.
Click to expand...
Click to collapse
Ya.. going there tomorrow. Lets see what they say about it.
amit3880 said:
Ya.. going there tomorrow. Lets see what they say about it.
Click to expand...
Click to collapse
have u tried hard bricked tool for OP3? if not then try it
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Hayatzada said:
have u tried hard bricked tool for OP3? if not then try it
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Click to expand...
Click to collapse
I am not able to follow this as phone is not even coming in USB mode. So its actually soft bricked because can go to twrp and fastboot mode and booting up without OS but USB is not able to detect on my computer.
now the service center guys saying I need to change the motherboard which I dont think is the issue, mother board is not going gone for sure as I can boot up in twrp and fastboot mode. its just may be the usb host controller gone.
Cant decide if I should go ahead with mother board replacement at cost of 10k INR ( phone cost was 28K INR) .
amit3880 said:
I am not able to follow this as phone is not even coming in USB mode. So its actually soft bricked because can go to twrp and fastboot mode and booting up without OS but USB is not able to detect on my computer.
now the service center guys saying I need to change the motherboard which I dont think is the issue, mother board is not going gone for sure as I can boot up in twrp and fastboot mode. its just may be the usb host controller gone.
Cant decide if I should go ahead with mother board replacement at cost of 10k INR ( phone cost was 28K INR) .
Click to expand...
Click to collapse
If you use the Method 2 of the Unbrick Guide, you don't need normal adb/usb mode recognition. Follow that guide scrupulously and step by step. Don't skip any and don't rush.
tnsmani said:
If you use the Method 2 of the Unbrick Guide, you don't need normal adb/usb mode recognition. Follow that guide scrupulously and step by step. Don't skip any and don't rush.
Click to expand...
Click to collapse
We are giving an advice of 10K InR in free and he is not even interested according to his opinion,
Hayatzada said:
We are giving an advice of 10K InR in free and he is not even interested according to his opinion,
Click to expand...
Click to collapse
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
amit3880 said:
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
Click to expand...
Click to collapse
Your phone need not be hardbricked to use the Guide. It will work even on a normal perfectly working phone. If your phone is not recognised while following the Guide, it only means one of two things: either it is a hardware fault or you are not following the Guide properly.
amit3880 said:
I even tried that but somehow it is not even recognized as QHUSB_BULK device.
believe me I have tried all things to revive the phone but its not hard brick in my opinion, it can boot into twrp but the when I connect the phone in computer it shows the error message I shown as attachment in my first post.
yes, I have tried 2 different computers and few usb cables.
Click to expand...
Click to collapse
reviewed post
tnsmani said:
Your phone need not be hardbricked to use the Guide. It will work even on a normal perfectly working phone. If your phone is not recognised while following the Guide, it only means one of two things: either it is a hardware fault or you are not following the Guide properly.
Click to expand...
Click to collapse
tried to follow the unbrick guide on windows 10 but phone is not seen as QSBULK device in device manager.
I am going to try on windows 7 as few post said that windows 7 would be better for unbricking than windows 10.
finger crossed, right now flashing windows 7 live iso on USB.
so finally I am declaring my op3 as hardware failure as one of my other phone (yureka) easily identified as 9008 mode in my computer but my op3 is not. so all drivers are installed correctly but somehow my op3's usb hub is failed.
i guess time to move on..
thank you everyone for spending time to help me. it really is supportive and encouraging...
amit3880 said:
so finally I am declaring my op3 as hardware failure as one of my other phone (yureka) easily identified as 9008 mode in my computer but my op3 is not. so all drivers are installed correctly but somehow my op3's usb hub is failed.
i guess time to move on..
thank you everyone for spending time to help me. it really is supportive and encouraging...
Click to expand...
Click to collapse
So sorry about that .... Sad news
@Ammit3880
have you tried plugging in a usb in you phone trough the usb OTG cable? see if twrp recognizes the usb. and just put the needed files on there. maybe windows is just breing ignorant as always
BADA 187 said:
@Ammit3880
have you tried plugging in a usb in you phone trough the usb OTG cable? see if twrp recognizes the usb. and just put the needed files on there. maybe windows is just breing ignorant as always
Click to expand...
Click to collapse
ya.. tried all the ways including various OTG cabel/dongle,, various OS windows 7/8/8.1/10 all the way..
nothing working...
amit3880 said:
ya.. tried all the ways including various OTG cabel/dongle,, various OS windows 7/8/8.1/10 all the way..
nothing working...
Click to expand...
Click to collapse
damn sorry to hear man.
BADA 187 said:
damn sorry to hear man.
Click to expand...
Click to collapse
Got 6T yesterday.... .. Yay!!
Couldnt find other phone competative in the price range.
Time to change the xda signature...
Although I bought 6T now and am kind of happy with that, but I am still missing my oneplus 3 and want to experiment on getting it revived.
By any chance someone can help me answering my doubts.. I would be greatful..
1. Is it ok to replace oneplus3's motherboard with oneplus 3t motherboard ? If by any chance i get any resell op3 or op3t in dirt cheap price I want to know if its ok to use 3T's motherboard.
2. Is there any way I can turn on the wifi from within TWRP and so I can connect to phone via adb over wifi/tcpip ??
Thank you all in advance.