Develop Bugs

hard bricked my lg 930

hi
i hard bricked my lg 930
how ?
i followed this step
http://www.androidauthority.com/lg-nitro-hd-clockworkmod-cwm-recovery-48447/
(do not follow)
i tried install ClockworkMod (CWM) since i installed the koereean rom and (no wi-fi to install tru rom manager)
is anything i can do for my phone like i'm not able to go in download mode, i can't see anything on screen. black
while i connect the usb cable i can hear a sound like connecting to computer
thanks a lot

We would need some more information to know if your phone is truly bricked.
does your device show up via ADB?
does it show up with B2CAppSetup program?
have you followed the unbricking solution?
http://forum.xda-developers.com/showthread.php?t=1597488
an important part of getting the phone into download mode is unplugging the usb at the right time during a hard reboot with the volume up held.
hope any of this helps but hopefully we will hear back with more info.

Maverick.Marq said:
We would need some more information to know if your phone is truly bricked.
does your device show up via ADB?
does it show up with B2CAppSetup program?
have you followed the unbricking solution?
http://forum.xda-developers.com/showthread.php?t=1597488
an important part of getting the phone into download mode is unplugging the usb at the right time during a hard reboot with the volume up held.
hope any of this helps but hopefully we will hear back with more info.
Click to expand...
Click to collapse
first of all thanks for response
no, it doesn't show up in adb (use command adb devices)
i can hear only the sound from computer (exactly like you connect true usb cable) but nothing on screen
yes, i tried the steps but ask to connect the phone, no usb connecting

@Maverick.Marq,
No, we don't really need more info to know his phone is hosed. Basically he has flashed a supposed CWM image on top of one of the bootloader partitions instead of the recovery partition. Everyone should contact these guys and tell them their guide is horribly, horribly wrong. They never responded to my email...but maybe if more people contact them about it, they'll remove their stupid guide.
Sent from my LG-P930 using Tapatalk 2

Malnilion said:
@Maverick.Marq,
No, we don't really need more info to know his phone is hosed. Basically he has flashed a supposed CWM image on top of one of the bootloader partitions instead of the recovery partition. Everyone should contact these guys and tell them their guide is horribly, horribly wrong. They never responded to my email...but maybe if more people contact them about it, they'll remove their stupid guide.
Sent from my LG-P930 using Tapatalk 2
Click to expand...
Click to collapse
thanks
anything i can do for my phone?

some update
some update
i have 2 computers
to the first one i never installed phone drivers other then lg drivers
1- in device manager with the phone conected (without or with battery) it's show "QHSUSB_DLOAD" with exclamation , see attachment
error 2 device manager lg p930 nitro.jpg
error device manager driver lg p930.jpg
2 - in USBVIEW20.exe when i open (phone still conected) i have this error (see attachment "error in usb view.jpg" and "usb view qualcomn.jpg")

some udate 2
in second computer i had many phone drivers like sony xperia play, htc evo 3d or htc desire
it's show zeus flash device with exclamation and now QHSUSB_DLOAD like the other computer - see " error desktop device manager zeus flash device"
i made 2 posts because i can't upload more then 4 images
i think to force to take driver for QHSUSB_DLOAD but how can i do that because i tried with propietes, update driver and don't want to take " android_winusb.inf" from lg drivers
i found in adb/adroid-sdk/extras/google a file android_winusb.inf and i have 3 choises (of course, i try to force to take the drivers,)
sorry for my english
if is some developer i can give access to my computer by remote
any ideas
thanks

update
i tried to burn the recovery image with nero and i have a error size
maybe this was the problem, the recovery image was incomplete?

nickmatine said:
i tried to burn the recovery image with nero and i have a error size
maybe this was the problem, the recovery image was incomplete?
Click to expand...
Click to collapse
LOL, I have no idea why you're trying to use Nero, but yes you are correct -- recovery images should be 16MB (16777216 bytes).
That's not the issue though. The issue is that you flashed something to the mmcblk0p6 partition, which is bad.

drumist said:
LOL, I have no idea why you're trying to use Nero, but yes you are correct -- recovery images should be 16MB (16777216 bytes).
That's not the issue though. The issue is that you flashed something to the mmcblk0p6 partition, which is bad.
Click to expand...
Click to collapse
i used nero just to see if is some error
mmcblk0p6 partition it's the bootloader partition?

Hi
Hi Nickmatine,
Could you please confirm if your phone (LG P930) got unbricked?
Regards

@allians2002,
Unless he sent it in to be hardware-flashed, it's probably pretty much hosed.

I think I have the same problem
http://forum.xda-developers.com/showthread.php?t=1569514
There is nothing you can do. I will sell mine, or if someone need a new screen or something, just so damn unlucky...

allians2002 said:
Hi Nickmatine,
Could you please confirm if your phone (LG P930) got unbricked?
Regards
Click to expand...
Click to collapse
not yet, but not abandoned the project
i think know where to solder wires to hard flash but it's a very small connector. Maybe 7-8 hours just to solder the wires. If someone know where can i buy the cable for this connector i can help you and other people

nickmatine said:
not yet, but not abandoned the project
i think know where to solder wires to hard flash but it's a very small connector. Maybe 7-8 hours just to solder the wires. If someone know where can i buy the cable for this connector i can help you and other people
Click to expand...
Click to collapse
i also have exactly the same problem. after unbricking . and coming to korean firmware i tried putting at&t firmware images and in the last step. it gave me an error "less in memory " for system.img.
the battery was at 2% when i did that. since then the screen wont light up.
i am trying to see if i can charge the battery with an external charger and then put back to phone and try if it boots.. i am pretty sad about it ..

i'll buy a jtag box next week and i'll let you know
or maybe someone know without jtag like this for optimus p930
http://forum.xda-developers.com/showthread.php?p=25501047

nickmatine said:
i'll buy a jtag box next week and i'll let you know
or maybe someone know without jtag like this for optimus p930
http://forum.xda-developers.com/showthread.php?p=25501047
Click to expand...
Click to collapse
i have given my phone for repair to nearby mobile repair shop. i have a very little hope from them .. which means its bricked

hem.acharya said:
i have given my phone for repair to nearby mobile repair shop. i have a very little hope from them .. which means its bricked
Click to expand...
Click to collapse
please tell as what happened
I'll let you next week after buy medusa box

finally, i bought the medusa box but i messed up my motherboard. Why?
In the schematic diagram for Jtag they give me the wrong pins (in mirror). Beacuse i tried many times with wrong configuration my motherboard died. After that i removed the JTAG conector and i so the wrong schematic
now,i still try to fix a lg p 930 so if anybody have a hard bricked phone for sell send a messege
Sorry for my english

SOLVED
greeting
After 6 months I'm back with feedback. I was Able to fix my LG P930 with Medusa box. Meanwhile I bought a professional microscope, Octopus Box, Z3X box and Riff box, so now i fix phones by JTAG. I managed to fix my P930 so is alive again after 6 months

[Q] Bricked Galaxy Nexus

Hi there! First of all I don't speak english very well.
My Galaxy Nexus hard bricked yesterday.
tl;dr no boot animation, no recovery mode, no download mode, no response from computer.
I thought it had just a low battery level, I found it turned off. So I tried to recharge it but it gave no signals, no battery icon, nothing.
After an all night long recharge I tried to turn it on, to enter in download mode or in recovery mode but nothing works. I also tried to connect it with my computer with and without battery, no response, no "OMAP" device found, no sound from Windows for plugging it in, nothing.
I found this thread here in xda, many people has been redirected to it and found their solution to the brick problem.
I tried to follow all the steps but when I plug in the phone and start the .bat file nothing happens, just stuck on "Waiting for device".
The phone is unlocked and rooted. I'm running AOKP JB-MR1 Build 2 and Franco Kernel for a month, never had problems with them, never installed other ROMs after that.
What should I do now? Should I try to do something or just bring it to a support center? The phone is still in warranty, there would be any problem because it has a non-stock ROM?
I've red about a jig to force the Odin mode, should I buy it? (I found this one)
Thanks for the help.

Have you tried booting into Odin mode

ntb81 said:
Have you tried booting into Odin mode
Click to expand...
Click to collapse
Yes, it doesn't work.

have you your warranty on it?
return it and get a new one

It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.

I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?

Beauenheim said:
It's hard bricked and a JTAG unit may force it into download mode, if you send it in for warranty, chances are it won't be accepted as it was obviously tampered with and they would find out that your bootloader is unlocked and charge you more money than the device is actually worth to fix it.
Click to expand...
Click to collapse
Yeah, that's why I'm not sure to send it in for warranty. So have I to try with a JTAG first?
[bman123] said:
I don't understand how it could of bricked if nothing has changed on the phone for a month or longer. Nothing was flashed recently so how can you hard brick the phone?
Click to expand...
Click to collapse
I'm not understanding that too, I don't know what happened. Suddendly it stopped working. Maybe is just a battery problem, I'll try to use another one before bringing it to the shop where I bought it.

same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
---------- Post added at 06:12 AM ---------- Previous post was at 06:02 AM ----------
galiganu said:
same happened to me, but I have an untouched phone with stock android. it worked well for over an year until today.
I see a lot of people having same issue, but they say that when connected to PC over USB the phone is recognized as OMAP.
for me the PC doesn't do anything...
any help? thanks
Click to expand...
Click to collapse
so right after I wrote that I plugged my phone into USB of my PC without battery. when I inserted the battery it started showing me the battery sign and I could started the phone. 3 minutes later it went black again, but the trick didnt work again.
any ideas? thanks

Try This !!
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!

Tech.Nik said:
Arrange a 4 ohm resistor and try to attach it in ur usb plug port of phone ..it 'll force the phon eto go in download mode or say Fastboot mode.
then follow a tutorial to flash any rom..
its quite easy else ping me !!
Click to expand...
Click to collapse
Please could you explain a bit more how to go about this? I have a Verizon Galaxy Nexus in a somewhat similar condition. This one is recognised as an OMAP 4430 device. I downloaded OMAP Flasher, installed drivers and tried to bring it back to life but after running the batch file I get this error: Operation FAILED (Remote: : Driver init error 0x00FF8080 - MMC CONFIG FAILURE). Can the resistor trick work on this and if yes, how can I go about it? I am not faint-hearted; I think I can handle it if given the right instructions.

After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys

galiganu said:
After I tried everything i could from the internet, I went to a shop and tested to see if the USB is broken - and indeed it was. I replaced the USB component of the phone and after that it started.
Thanks guys
Click to expand...
Click to collapse
Yeah, the faulty USB port is a very common issue.

[Q] T-Mobile S2 T989 - hardbricked / can jtag fix it?

I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!

Dostoevsky said:
I received an SGH-T989 that wouldn't boot. It had TWRP on it, so I was able to flash latest stable CWM. Upon reboot, it apparently became hard-bricked.
Currently, I'm unable to enter download or recovery modes. USB Jig does not work. There is no output on the screen, even when charging the battery. When connected in Windows (32 or 64), I get a usb error message: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)"
My question: Is the motherboard dead, or could a jtag repair fix it?
What I've tried:
multiple micro usb cables
usb jig
odin
keis
heimdall
Thanks xda!
Click to expand...
Click to collapse
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on

Trozzul said:
so the qhsusb_dload does not apear when your device is plugged into the computer? if so please hold on a little longer, somebody found a method of unhard bricking S3's and eventually Note 3's and the galaxy megas and im getting closer to being able to do this aswell im going to try to fix mine when i get home so hold on
Click to expand...
Click to collapse
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:

Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Hello I was wondering if the Jtag did its job?

sirsmokey said:
Hello I was wondering if the Jtag did its job?
Click to expand...
Click to collapse
Jtag should always do the job, unless there was physical damage done to the motherboard.

Dostoevsky said:
That would be great! I did see the S3 fix that loads a debrick.img from sdcard - would that work with hardbricked? Windows wouldn't load the usb drive for my phone, complaining that the firmware didn't give the "required resources". So if the firmware is borked, I'm not sure it would be able to load an external img.
I couldn't wait, though. Sent it out for jtag repair :fingers-crossed:
Click to expand...
Click to collapse
Trozzul said:
Jtag should always do the job, unless there was physical damage done to the motherboard.
Click to expand...
Click to collapse
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess

sirsmokey said:
Thanks for the quick reply , i guess the next question i should ask , is it really worth the 100 bux for the j tag service or to put the money towards a newer phone ?,hmmm rhetorical i guess
Click to expand...
Click to collapse
The t989 has great specs, only downside is its PPI (really low) if you still love it, I would wait if you want to send it into JTAG repairs, we are on the verge of unbricking our t989 without JTAG! Looks like we need someone with a working t989D though

I have been studying the other 'unbrick' methods, its definatly mind expanding, the amount of knowledge absorbed can seriously make you forget time n space.
If there is anything I can do / contribute holler at me.
Now ill tell you something weird so I flashed a rom not meant for T989D plus I did it all without being rooted. (if it matters) since Since the flash the phone doesn't boot into recovery or show a bootanimation, just darkness.Yet it felt operational in hand.
Once I plugged it back into the PC all I got was a constant notification of drivers that cannot be identified Also it keeps connecting and disconnecting the device.
None of this is weird until I installed OMAP flash and the T.I. drivers for which was used to fix my friends nexus. After he left I plugged my s2 to the PC still nothing. I looked away for a brief moment . Then i noticed MobileGo for Android popped on screen. Visually showing my s2 as an Alcatel rom.
just bizzare.....

The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.

Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir

sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
glad to hear its working again! might i ask how you went about this?

sirsmokey said:
:goodude I could kiss you, thank you so much!!!! that is exactly where my phone was (QHSUSB_DLOAD):good:
Thanks to the devs behind the unbrick , all of your hard work is deeply appreciated, One Luv :laugh:
Now my 989 is working again, ive had it stuck for the past half year. Life saver you are sir
Click to expand...
Click to collapse
Lord Zog said:
The unbrick method on the S2 is a little different, but in General, at http://forum.xda-developers.com/showthread.php?t=2646310 after a little work, I resurrected a QHSUSB_DLOAD 9025 T989D to the point of ODIN and fully working Android OS working, just missing recovery.. Soon to follow in a day or so.
Click to expand...
Click to collapse
Hi, so I also have a hard bricked t989 galaxy s2 (tmobile variant) and I'm attempting to understand the instructions. However my phone has another issue...usb connection to the computer does not work, it hasn't worked since the micro usb port on the phone was replaced because the old one broke. So really the phone could charge but never connect to my pc as it cant be detected...so what are my options? If i create the sd card with the image, will i still need to connect it to a pc in order to force the phone into download mode? Please help...

[Q] Cannot Restore G3 To Stock Using Flash Tool

I tried to use a volume fix by changing the values in some system files on my rooted G3, rebooted and got stuck at the LG Bootlogo. Been trying lots of things, finally used this thread: http://forum.xda-developers.com/showthread.php?t=2799647 but the flash tool fails at 14 seconds saying failure to enter download mode. I have a D851C on T-Mobile, it is in download mode when I run the program and no change occurs on the screen save for the text log at the bottom. Upon booting into DL mode, it says USER B94. After unplugging and plugging it back in to start the unroot it changes to USER S0.0 AS0.0 B94 UHS then on the next line S U LG-D851 04.4.2 Hrev_10 and the next D85110c. It takes a good 50 seconds for the flash tool to change from saying awaiting connection, and then at 14 seconds it looks like the photo. The names of the dll and tot I am using are, respectively:
LGD851_20140611_LGFLASHv160
LGD851AT-01-V10c-310-260-JUN-20-2014+0
Yes I have set the port to 41 in device manager.
What the heck is wrong?

Someone please help I was supposed to fly out of state today but now I don't think I can without a phone and I can't afford a new one, I'm a student

Did you put your phone in download mode? It's not broken you just need to successfully flash it. It says download mode failed so here's a simple way to enable it if you ate having trouble. Pull out the battery then hold volume down and put it back it and plug in the cable. This should be done in a relatively fast manner to enable it if you are having issues getting into download mode.
Edit I know you said you put it in DL mode but I had a similar issue with my F400S so its worth a try.

Pilz said:
Did you put your phone in download mode? It's not broken you just need to successfully flash it. It says download mode failed so here's a simple way to enable it if you ate having trouble. Pull out the battery then hold volume down and put it back it and plug in the cable. This should be done in a relatively fast manner to enable it if you are having issues getting into download mode.
Edit I know you said you put it in DL mode but I had a similar issue with my F400S so its worth a try.
Click to expand...
Click to collapse
I tried it, same error at 14 seconds. Tried taking the battery out after the yellow ready button comes up to and doing it that way, nada

Did you try using LG PC Suite --> Tools --> Fix Upgrade Problems?
The steps can have different names (didn't remember the names) but something like that, worked for me when I messed up my system

kvanzuijlen said:
Did you try using LG PC Suite --> Tools --> Fix Upgrade Problems?
The steps can have different names (didn't remember the names) but something like that, worked for me when I messed up my system
Click to expand...
Click to collapse
LG PC Suite didn't recognize it before, does it need to be in download mode when I do that? Or is there another recovery mode?
*EDIT* Just discovered this log, maybe someone's familiar with the codes and has an idea what to do

Bump please help I don't want to use a warranty claim

Bump

DrPhill94 said:
Bump
Click to expand...
Click to collapse
I may have found the solution for another member, but it is untested from me, as I am at work at the moment. In flashtool did you change the action mode? if not try changing the action mode to board dl instead of what its set to. Let me know, because I got the same issue right now.

joeyhdownsouth said:
I may have found the solution for another member, but it is untested from me, as I am at work at the moment. In flashtool did you change the action mode? if not try changing the action mode to board dl instead of what its set to. Let me know, because I got the same issue right now.
Click to expand...
Click to collapse
Tried it a few times, no luck so far. Same error same time

DrPhill94 said:
Tried it a few times, no luck so far. Same error same time
Click to expand...
Click to collapse
damn, I'm on Sprint variant, only thing I haven't tried is lg suite and making sure my Flashtool is the latest version. I've tried everything else last night for 6 hours.
edit: my dl mode is working perfect. I see in your Flashtool, your error is slightly different. mine gets stuck at 93%. Then it reboots back to this

DrPhill94 said:
LG PC Suite didn't recognize it before, does it need to be in download mode when I do that? Or is there another recovery mode?
*EDIT* Just discovered this log, maybe someone's familiar with the codes and has an idea what to do
Click to expand...
Click to collapse
PC Suite won't recognize it if you don't use the correct version. The latest from LG's site is in fact the wrong version. You need the version that's about 223mb in size. Sorry, I'm not sure of the version and am currently busy fixing my phone with it, so can't check. Perhaps someone would kindly supply you with a download link.

Beylie said:
PC Suite won't recognize it if you don't use the correct version. The latest from LG's site is in fact the wrong version. You need the version that's about 223mb in size. Sorry, I'm not sure of the version and am currently busy fixing my phone with it, so can't check. Perhaps someone would kindly supply you with a download link.
Click to expand...
Click to collapse
Will it work even if my phone doesn't show up in explorer? My pc makes a sound when it is plugged in and unplugged in Download Mode but the only thing so far to recognize it is flash tool. If you can check the version please let me know but I'll look for it

Did you try a different USB port on your computer? Drivers get honked up easily using flashing tools and sometimes using a different port, or even a different USB cable can fix your problem. More likely another usb port, but I've also had a bad cable as well.

Ozark_8125 said:
Did you try a different USB port on your computer? Drivers get honked up easily using flashing tools and sometimes using a different port, or even a different USB cable can fix your problem. More likely another usb port, but I've also had a bad cable as well.
Click to expand...
Click to collapse
That's the problem is the only cable that works is the one that came with it, and I've used 3 of my 4 on my laptop, so I doubt it's the port

Ozark_8125 said:
Did you try a different USB port on your computer? Drivers get honked up easily using flashing tools and sometimes using a different port, or even a different USB cable can fix your problem. More likely another usb port, but I've also had a bad cable as well.
Click to expand...
Click to collapse
Also you have to realize the phone doesn't turn on. I get the LG logo, download mode, or factory reset. That's it

If that is the only cable that works - my guess is there's something probably wrong with the micro usb jack on your phone.. it shouldn't be that finicky where only 1 of 4 cables would work. If you do a warranty return, you might get lucky anyways. Several folks have posted on XDA that the stores where they returned phones were either clueless or didn't care about the status of the root code. Of course, YMMV.

Ozark_8125 said:
If that is the only cable that works - my guess is there's something probably wrong with the micro usb jack on your phone.. it shouldn't be that finicky where only 1 of 4 cables would work. If you do a warranty return, you might get lucky anyways. Several folks have posted on XDA that the stores where they returned phones were either clueless or didn't care about the status of the root code. Of course, YMMV.
Click to expand...
Click to collapse
You misunderstand: The cable that comes with the G3 is the only one GUARANTEED to work with these operations. Has nothing to do with the jack. Getting a new one in the mail tomorrow, can't tell if it's rooted if they can't access the filesystem

Need a lot of help! ZF2 Z00A

I need help, my ZF2 suddenly cannot be detected by my windows 7 laptop and pc. When I tried to plug in usb 3 port, it wont get detected. If in usb 2/1 port, it will be detected but with the yellow exclamation mark. I tried updating mtp but it wont update (shows device is up to date). I tried reinstalling ROM and factory reset thru the ROM, but still not working.
I returned to stock but still it wont get detected on my pc or laptop. I ****ed everthing up when I returned to stock since I cant root it back anymore since it wont get detected by adb.
Evereything is up to date including 15sec adb installer 1.4.2 or 1.4.3 and intel usb driver 1.10 from 1.9.
I will try to reformat thru stock recovery and see if it will work. But before doing that, any suggestion or ideas?

Does it charge while connected to the laptop?
Have you tried using other micro USB cables?

FrameCall said:
Does it charge while connected to the laptop?
Have you tried using other micro USB cables?
Click to expand...
Click to collapse
Yes, it charged when I plugged it on different port. And yes, I have tried different cables, samsung, asus and dont know brand chords. All cables only shows usb device malfunction code 43 and all charged my phone when plugged to ports.

Anybody? Suggestions? Ideas?

Anyone?

Can you check and see if fast charging works?

24imelqui said:
Anyone?
Click to expand...
Click to collapse
Which recovery you installed?

trinimike100 said:
Can you check and see if fast charging works?
Click to expand...
Click to collapse
Fast charging dont work anymore. It will take atleast 2 hrs to charge the phone.

mr_gourav2000 said:
Which recovery you installed?
Click to expand...
Click to collapse
I used to have a twrp 3.0.0-0 recover then flash .165 recovery then flash .165 stock ROM. And after reboot, still cant get detect by any port. It just charged my phone. Then I updated to .174 but still no detection.

24imelqui said:
I used to have a twrp 3.0.0-0 recover then flash .165 recovery then flash .165 stock ROM. And after reboot, still cant get detect by any port. It just charged my phone. Then I updated to .174 but still no detection.
Click to expand...
Click to collapse
Try this.
http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526

mr_gourav2000 said:
Try this.
http://forum.xda-developers.com/zenfone2/development/stock-rom-ul-z00a-ww-2-20-40-168-t3354526
Click to expand...
Click to collapse
I have already returned to stock rom and recovery all is good, but my problem still exist. I cant get my phone to get detect by my PC or laptop. It just charged and it show usb device malfunction code 43. I got all drivers installed since I was able to root and flash custom roms before. Im asking if hard reseting thru stock recovery will fixed my problem and if you have any others ideas please share. Like how to root my device again without using pc/lwptop.

24imelqui said:
I have already returned to stock rom and recovery all is good, but my problem still exist. I cant get my phone to get detect by my PC or laptop. It just charged and it show usb device malfunction code 43. I got all drivers installed since I was able to root and flash custom roms before. Im asking if hard reseting thru stock recovery will fixed my problem and if you have any others ideas please share. Like how to root my device again without using pc/lwptop.
Click to expand...
Click to collapse
Try this may help you -
Switch off mobile
Plug in usb and connect to laptop or pc.
Now power on your mobile.
Look what happened?

mr_gourav2000 said:
Try this may help you -
Switch off mobile
Plug in usb and connect to laptop or pc.
Now power on your mobile.
Look what happened?
Click to expand...
Click to collapse
Still usb device malfunction code 43. Thanks man

I had the same issues when my Zenfone's chip set fried - PC did not recognise the phone, phone did not recognise USB drives, fast charging not working. To be precise what happened: one day I plugged in the cable (original one, with original charger), the phone showed high temperature warning and shut down. Then after a while I turned it back on but USB wasn't working any more, except for the slow charging. Sent in for a warranty repair, it was stuck there for like 2 months before they sent me a new phone.

Had the same problem, it turned out that my zenfone 2's charging port and microphone had been damaged. Replaced the parts from a third party repair man as my warranty was void. He returned me a very well functioning and no more problematic zennie within a week
It surely isn't a software problem..
Hope it helped..

Abhishek1108 said:
Had the same problem, it turned out that my zenfone 2's charging port and microphone had been damaged. Replaced the parts from a third party repair man as my warranty was void. He returned me a very well functioning and no more problematic zennie within a week
It surely isn't a software problem..
Hope it helped..
Click to expand...
Click to collapse
j4nitor said:
I had the same issues when my Zenfone's chip set fried - PC did not recognise the phone, phone did not recognise USB drives, fast charging not working. To be precise what happened: one day I plugged in the cable (original one, with original charger), the phone showed high temperature warning and shut down. Then after a while I turned it back on but USB wasn't working any more, except for the slow charging. Sent in for a warranty repair, it was stuck there for like 2 months before they sent me a new phone.
Click to expand...
Click to collapse
I have the same problem also. Can you tell me what part needed to be replaced? I already tried replacing the usb sub board but it did not work.

trinimike100 said:
I have the same problem also. Can you tell me what part needed to be replaced? I already tried replacing the usb sub board but it did not work.
Click to expand...
Click to collapse
I went to a 3rd party repairman and he said he just replaced the flex data cable or something like that, he also said it is common for zenfone smartphone. Then my phone is detectable again.