hi friends
i have just bought T-mobile MDAIII ( also knows as 2 XDA2s/imate PDA2K)
AND I WONDERED ABOUT UPGRADING MY ROM AND BY MISTEK WHILE UPGREADING IT GOT DISCONNECTED FROM USB
AND NOW ITS NOT WORKING AT ALL
WHEN ITS CONNECTED TO USB THE SCREEN SHOWS
USB V2.05
AND WHILE ITS OUT OF USB ITS SHOWS
SERIAL V2.05
THE PHONE IS NOT GETTING ON NOR ITS SHOWING SOMEHTINGS ELS THAN THIS
I TRIED TO RESET ALSO BUT ITS NOT GETTING RESET TOO
CAN ANYONE HELP ME TO SWITCH ON MY PHONE TO ITS ORIGINAL VERSION
THANKX
I REQUIRE HELP ON URGENT BASIS SO KINDALY REPLY AS SOON AS POSSIBLE
THANK U ALL THE PPL
Please, don't SHOUT
Related
I have a problem with the usb in my K jam so I can't updating my rom ..
I read that is possible to updating by using the card … so any body know how we can do this
Thank you all
maybe you should read this
http://forum.xda-developers.com/showthread.php?t=276963
thanks .... but this need me to use the cable and as I told you befor it dos't work with my mobile
"5- Now connect your USB cable to your phone"
that what i can't do it
so is there any help
thank
dear all friends
i have flashed i607 with i600 firmware andi see phone off and it cant connect to pc to flashed it back to i607 please help me how can i slove this problem are there any idea to slove it with mirosd or anything . please replay with helps .
Press and hold both the "Right Soft key" & the "Camera Button" at the same time. Then hit the power button with the other two buttons still depressed. You will now be in the USB Downloader mode and now Windows will detect it and you can flash it.
thanks for your replay but it go ro usb downloder mode but it cant detect phone in pc same problem .please other idea
waleed2 said:
thanks for your replay but it go ro usb downloder mode but it cant detect phone in pc same problem .please other idea
Click to expand...
Click to collapse
reboot your pc, try another pc, try another usb cable.
not work with same problem try other pc and other usb cable same problem
please where is other friends help me
where is our moderators and friends please ineed help in my problem
,i have the same question , have you solove your problom?
any solution ??? i got one says phone off!!!
bachatia said:
any solution ??? i got one says phone off!!!
Click to expand...
Click to collapse
Have you seen the date of the last post
yes, but my cuestion is, exist any solution for this???
Doubt it as Excalibur users, might be worth making a post in smartphone general and see if get a reply?
Is there not bj forums?
I wanted to upgrade ranju wm6.
Something went wrong and now my device will not start up.
In bootloader mode I can see Serial v1.01
I tried the MTTY (1.6), but can't see a USB port. Even after killing m........exe on host PC.
That only adds an additional port(not comm), but still no USB port.
Therefor can't execute: set 14 0
Please help!!!!!
Would like to go back to WM5 (qtek rom)
Best regards
Exactly the same problem
Hi Guys ,
I got exactly the same problem. Stuck in the bootloader and nothing works anymore. Not even the MTTY tool....
Hopefully someone could help us.
cheers
jurjen
Same Here..
Stuck in bootloader screen after upgrading to ranju's 7.7
that makes three of us.
When I try to enter bootloader is asks me to enter 0 to hard reset?
!
I also got stuck the same way.
solutions given are not working! any other solution?
Same here,
Maybe i've overlooked the universal version.
I understood that the ranju 7.7 is only for the G3 and G4.
Aperently there are more versions of the universal. Where is the version number on my universal? I bought mine as the qtek 9000.
How do you flash the universal when it doesn't boot anymore?
Thnx
Trying to solve the problem I found this:
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
My device seems to have been fixed.
After flashing Ranju 7.7 it took 6 times to align the screen but it is working now.
I will report here if anything terrible has happend , so far so good
Nope
It's not working! All tried...
USB device not recoganised! so first two steps are out!
3rd not working
checked another (correct) Universal
Hi Guys,
indeed I haven't been able to select the USB port in the MTTY tool. But when I try my old phone - a working universal (with broken sound) - I neither make contact with the USB port. So could it be that my laptop has something wrong?
cheers
Jurjen
Hi
Just using the original cable and on another computer it worked
difference between Cables
Hi ,
good to hear that you have fixed your universal. What is the main difference between the original cable and a normal usb cable. And how do I recognise both?
Hope to unbrick mines soon.
cheers
Finally it worked
Hi all,
Indeed when using another cable I got my dearest universal back.
So indeed using another cable can help a lot.
Thanks for all your suggestions.
cheers
Jurjen
So i was like always playing around with my note 2 for 2 days and i wanted to put it on charge with my usb cable! so i have connected the phone and nothing happen no sign or anything that is charging! rebooted twice, nothing installed reinstalled drivers for the note 2 again nothing! formated my laptop and still nothing! its not from the computers ports! i tried the same usb cable on my car and it was charging without any problem! What the heck is this??? i think that im gonna sell this tomorrow!!
peace out guys! hope that some of you got a solution for this problem or it will just be a warning for those who will get the same problem later!
Download the latest .exe of "kies" software from official samsung site & install it on your laptop & then try to connect your phone , that should solve it !!!
ketani73 said:
Download the latest .exe of "kies" software from official samsung site & install it on your laptop & then try to connect your phone , that should solve it !!!
Click to expand...
Click to collapse
Installed Kies from the official website! guess what?? NOTHING!!
Thanks anyways for your kind help i guess i'm gonna sell this thing and get something else regards
Hi there
I have recently brought a HTC ONE X second hand from a friend,
Im using the latest OS on my macbook pro and im trying to connect my new HTC to my sync manager but not having much success,
I have tried all the usual still developers usb debugging etc but still says unable to connect anyone have any advice or help please?
kind regards
Shane
shaneuk said:
Hi there
I have recently brought a HTC ONE X second hand from a friend,
Im using the latest OS on my macbook pro and im trying to connect my new HTC to my sync manager but not having much success,
I have tried all the usual still developers usb debugging etc but still says unable to connect anyone have any advice or help please?
kind regards
Shane
Click to expand...
Click to collapse
does your macbook recognises the device? Maybe your usb cable or drivers are problem?
hi
hiya
yes it says phone connected but nothing else
i can view music and photos but nothing more it says devise not found please reconnect phone yet when i try the home screen on sync manager it says phone connected loading data but nothing!!!