I have the 6.5 rom by nfsfan. Is there a way i can change the registry or settings somewhere so that when i go to the music tab it launches S2P instead of WMP?
The link that is launched is hard coded into manilla. The only way around that is to change the link that is opened. You can use something like vjbrisk to change any actual link - for instance, you can use it to replace the actual wmp.exe (or whatever it is called) in windows so that anything that tries to open that link will instead open S2P. This is problematic, though, if you wanted to continue using WMP for other things in the future. Erasing vjbrisk from the windows folder restores the original link that was replaced automatically, so you don't have to worry about messing stuff up. Use something like total commander or resco explorer to overwrite files in the windows directory.
thanks for the reply!
Related
Ok for this to work you need PlayPause, it can be downloaded here, and the HTC audio manager
http://forum.xda-developers.com/showpost.php?p=3548894&postcount=21
Make sure you download it to your phone and not a storage card
After you install it on your Dash, you'll realize that you cant actually manipulate the fields which is every frustrating.
Therefore you must exit the app go to program files/playpause/audiomanager
In this folder there will be the two programs that have the functionality that you are looking for.
Get a registry editor and link the HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand's Path value to one of the files.
Then rename the unused file to redial.exe, move that to \windows and it should work out. btw make sure you make a copy of redial.exe just in case you want to put it back.
-Leanback
Welcome to forums
Thanks for sharing!
Hi, my name is kostas and I recently become owner of a Blackstone!
After searching the forum about themes and how to create them, I decided to try and create one. That's when my problems started!
First I copied the windows folder from my device to my pc, then with manila editor I extracted the icons that I wanted to change and edit them in photoshop. After that, I replaced them to the manila files with manila editor.
When I tried to copy the new manila files to my device I got a message which says that I cannot copy them to the windows folder.
Then I used QuickCab to install the files from my phone but after the installation I started the TF3D and the old icons were shown.
What should I do to make this work?
koiranos said:
Hi, my name is kostas and I recently become owner of a Blackstone!
After searching the forum about themes and how to create them, I decided to try and create one. That's when my problems started!
First I copied the windows folder from my device to my pc, then with manila editor I extracted the icons that I wanted to change and edit them in photoshop. After that, I replaced them to the manila files with manila editor.
When I tried to copy the new manila files to my device I got a message which says that I cannot copy them to the windows folder.
Then I used QuickCab to install the files from my phone but after the installation I started the TF3D and the old icons were shown.
What should I do to make this work?
Click to expand...
Click to collapse
If you used File Explorer to replace the files, most times it does not allow you to return them. The safest is probably to first disable TF3D (Settings\Today) and then use something like to Total Commander or Resco to replace the files in Windows. Soft reset and re-enable TF3D.
thanks for the advice. I'll try it and see what happens
koiranos said:
thanks for the advice. I'll try it and see what happens
Click to expand...
Click to collapse
Pleasure bro, hope it works for you. You can also look at HD Wall which allows you to create your own slider with your icons and then creates a cab for you to install.
ClydeB1 said:
If you used File Explorer to replace the files, most times it does not allow you to return them. The safest is probably to first disable TF3D (Settings\Today) and then use something like to Total Commander or Resco to replace the files in Windows. Soft reset and re-enable TF3D.
Click to expand...
Click to collapse
Alternatively you can use Sashimi to copy the files to your Windows directory! But Total Commander should work just fine...
I'm running the stock ROM (with a few cabs installed) and just got my internet working the way I like it. The issue I have is that when I launch the internet browser from the TF3D internet icon it will always default to att.net, even after changing the homepage within IE. Is there a way to change the default page for this?
Thanks in advance!
Anyone have an suggestions/comments on this?
Re: Internet link/icon/homepage
Sounds like something in the registry that defaults it all the time. If you have Total Commander or PHMEdit (or any other registry editor), you might have some luck in locating the persistent URL.
(steps on Soapbox) I'll never understand why the Death Star company insists on both bloatware and total domination of your phone settings...(steps off)
Demonic240 said:
I'm running the stock ROM (with a few cabs installed) and just got my internet working the way I like it. The issue I have is that when I launch the internet browser from the TF3D internet icon it will always default to att.net, even after changing the homepage within IE. Is there a way to change the default page for this?
Thanks in advance!
Click to expand...
Click to collapse
My TP2 is from Sprint, and it comes stock with IE mobile, of course, but when launching internet through TF3D, it's actually launching Opera Mobile. Don't know if it's the same in your case, but if it is, you'd have to change your homepage in Opera settings. Hope this helps.
This has been described previously. You need to edit an XML file.
1. Use Resco Explorer or Total Commander on your phone and navigate to Application Data/Manila/InternetPortal-en-US.XML
2.Copy the XML file to your Storage Card
3. Transfer file to your computer
4. Hold down right mouse key and click on properties and un-tick the attribute read only,
5. Use notepad to open the XML file and change the entry NavigateURL=att.net to whatever you want.
6. Save the file and change attribute back to read only
7. Put back in your Storage Card and then move to Application Data/Manila on your phone.
8. Reset your phone.
I tried installing Max manila on my TP2, but I must have used the wrong version. When the phone boots, it gets stuck at the "Touch here to launch HTC Sense" prompt.
I can get into the programs menu, but not into Settings. How can I uninstall this CAB if I can't get into Settings?
Tried looking at the original thread, but at 96 pages, the signal-to-noise ratio is just too low, and you can't find anything! Hence this new thread.
I really don't want to have to do a hard-reset!
if it is getting stuck at starting manilla you should still be able to click on the windows start button where you can get into the settings/home sections. From here untick sense and restart the device so it starts properly without starting sense. Remove manmanilla from remove programs option and then reinstall the working version.
Alternatively reflash your rom.
stoolzo said:
if it is getting stuck at starting manilla you should still be able to click on the windows start button where you can get into the settings/home sections. From here untick sense and restart the device so it starts properly without starting sense. Remove manmanilla from remove programs option and then reinstall the working version.
Alternatively reflash your rom.
Click to expand...
Click to collapse
In WM6.5, there is no settings entry on the start menu. There must be a series of steps for deleting files and changing registry sessions that could be done manually if only one knew how.
There is a settings shortcut in WM 6.5, however in some roms the chefs have this shortcut pointing to the manila settings tab instead of WM settings dir. Obviously if manila won't load then this shortcut won't work for you anyway. Unfortunately I have no idea how to get that settings shortcut back on the start menu and working for you :/ You could use Total Commander to manually delete all of the files altered by MaxManila and then soft reset - your phone will then restore the rom's original files. There are a lot of files in MaxManila though, so it might take a while to hunt them all down. Use aiCabExplorer to open MaxManila's cab file and get the names of all the files to delete.
millski said:
There is a settings shortcut in WM 6.5, however in some roms the chefs have this shortcut pointing to the manila settings tab instead of WM settings dir. Obviously if manila won't load then this shortcut won't work for you anyway. Unfortunately I have no idea how to get that settings shortcut back on the start menu and working for you :/ You could use Total Commander to manually delete all of the files altered by MaxManila and then soft reset - your phone will then restore the rom's original files. There are a lot of files in MaxManila though, so it might take a while to hunt them all down. Use aiCabExplorer to open MaxManila's cab file and get the names of all the files to delete.
Click to expand...
Click to collapse
I tried renaming all the files and registry keys obviously associated with MaxManila, with no luck. I don't know how the files in the CAB get installed, but I searched for half a dozen of them and they were nowhere to be found.
klausner said:
I tried renaming all the files and registry keys obviously associated with MaxManila, with no luck. I don't know how the files in the CAB get installed, but I searched for half a dozen of them and they were nowhere to be found.
Click to expand...
Click to collapse
Did you use Total Commander? File explorer isn't powerful enough to edit system files
millski said:
Did you use Total Commander? File explorer isn't powerful enough to edit system files
Click to expand...
Click to collapse
TC for the registry, Resco for the files, but I have it set to show all types.
Well I've just checked - I can see and delete all of the MaxManila files in my windows dir except the homeservice.dll using TC. Don't know what else to suggest; there must be a way to get back the settings shortcut (?)
To get settings, change registry as shown:
Code:
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo]
"HideSettings"=dword:00000000
Hello, I just had a question about adding new programs on my Rhodium. Whenever I install a new program over active sync, or through a .cab file, it places the link to the program (the icon) right in my start menu (Using a Rom that has WM 6.5 with the new start page)
But, in my start page, there are folders like "Internet," "Tools," and "Multimedia" that I would like to add my new programs into. For example, I want my Slacker Radio app I just installed to show up in the Multimedia folder instead of just thrown at the end of my start menu.
I was wondering if there's any tweaks or anything to get my new programs to be installed to one of these folders instead of just the start menu.
You can use Total Commander or JSPA Program Manager to move the shortcuts to the desired folder. JSPA is the easiest to use and is free.
Miami_Son said:
You can use Total Commander or JSPA Program Manager to move the shortcuts to the desired folder. JSPA is the easiest to use and is free.
Click to expand...
Click to collapse
Thank you, I'll give JSPA a try right now!