Hello,
I would like to know how can I extract the .cab files from an exe file that is an application installer (the exe should be run on the PC).
I think that the active sync saves a copy of the cab files, but I am not sure. If using activesync is the only way, it's fine, but I prefer a method that does not install the software first and it does not involve activesync.
Thank you,
Eran
Well it really depends on the application, there is not always one answer that fits all things.
You can try using a program like WinRAR and right click on the PC exe, you may see an option to extract the files, if you do chances are you'll gain access to the cab files. Things like the ROM updates work this way.
Sometimes this method doesn't work. Then you may need to install the program on your PC. You'll need to look on your C drive for the folder the program creates, generally this will be with in the C:\Program Files\ folder or the C:\Program Files\Microsoft Activesync\ folder. This folder can be easy or hard to find.
Another method is to set Pocket File explorer to "Show all files" (you'll need to tap and hold on the white space at the bottom of the page, and select this option from the menu that pops up.) Then go to \My Device\Windows\AppMgr\Install\ and wait for the file to appear here when you first install it. Note that in WM5 you are generally asked if you wish to install the program, DO NOT ANSWER THIS QUESTION instead go to pocket file explorer and look at the \My Device\Windows\AppMgr\Install\ folder your cab should be here, after it is installed it will be deleted from this folder and some times cabs are partly deleted in the install process. (it maybe necessary to install two or more programs at the same time to get a working copy of your program cab file.
DAH
Im pretty new here and just got my BA not tooo long ago...I used to be a trreo user now im hooked on my BA.
I see alot of software that comes in a form of a cab file...does anyone know how I can load that software on my BA? thanks alot!
hey mate and welcome!
if you put the cab file in your pc folder; you'll see that the description is "zip file"....that's because it's the only format microsoft recognizes...in a way its also true as the cab file is a compiled program ready for installation. what you do is DON'T unzip the file in your pc; rather cut/copy and paste it directly in your ba (via activesync or in your sd card). put it in a folder that's easy to find; say "my documents...personal" (or you can make your own folder to put in cab files). use your ba's file explorer and go to the folder...from there double click (via stylus) on the cab file and it will automatically install itself. btw, if you copied the cab file in your sd card you can also execute the installation there....no need to paste it in your my documents area.
if you're using wm2005; upon execution the unit will ask you if you want to install it in the sd card or internal memory....that's really up to you depending on the size of the file you're installing.
hope that helps
rob
thanks alot Robson.
Ive always looked past cab file programs b/c i couldnt install it. I hope this thread helps other newbies too. I searched and couldnt find an answer.
is there anyway that can install cab files direct from pc to ppc?
sorry for the late response; was in china for a week.
unfortunately, no. i don't think there's a way to install cab files via pc. if you do unzip a cab file; you'll notice that the files are something like:
0000124
009890
or something like that....can be as many as 20 lines of code...but scanning through the entire zip will not give you any .exe files which can be executed via pc. if you have a card reader installed on your laptop, simply copy and paste the cab file on your sd and from there install via your ppc
hope that helps
rob
I have the 6.5 rom by nfsfan. Is there a way i can change the registry or settings somewhere so that when i go to the music tab it launches S2P instead of WMP?
The link that is launched is hard coded into manilla. The only way around that is to change the link that is opened. You can use something like vjbrisk to change any actual link - for instance, you can use it to replace the actual wmp.exe (or whatever it is called) in windows so that anything that tries to open that link will instead open S2P. This is problematic, though, if you wanted to continue using WMP for other things in the future. Erasing vjbrisk from the windows folder restores the original link that was replaced automatically, so you don't have to worry about messing stuff up. Use something like total commander or resco explorer to overwrite files in the windows directory.
thanks for the reply!
There are a number of TP2 tweaks which require the editing or replacement of files - for example, there is supposedly a way of increasing the loudspeaker volume which involves replacing a file called AudioPara3.csv with an edited version. This file sits in the Windows folder.
I'm using Resco File Explorer on my TP2, with the corresponding shell extensions installed on my desktop Windows, but nothing I do will allow me to edit that file. Trying to overwrite it (by dragging the copy into the appropriate Explorer window on my desktop PC) fails, telling me that I don't have the necessary permissions. If I look at the file properties on my TP2, it's set to read-only. If I try clearing the read-only checkbox this looks as if it's going to work, but actually if I go back into properties again, it's still set to read-only. There's another (disabled) checkbox in the properties labeled "ROM" which is ticked - I assume it's this that is causing the problem.
I've also tried renaming the file - that, again, appears to work but what it actually does is to create a duplicate of the file with the new name while leaving the old file intact.
There must presumably be a way of overwriting this file, otherwise no one would have been able to install the tweak!
I have a similar problem with the weather database file - so I can't add in extra locations.
What am I missing?
Try doing it on the TP2 itself with Resco File Explorer. I do not have any problem so far. Not too sure when you use it on the desktop.
weenween said:
Try doing it on the TP2 itself with Resco File Explorer. I do not have any problem so far. Not too sure when you use it on the desktop.
Click to expand...
Click to collapse
Several options in Resco File Explorer failed, but using the Copy To option worked, for some reason.
Don't think it actually made the speakers any louder, though.
You can also try Total Commander (not like it'll make the speakers louder, but for future reference).
Total Commander will work OR you can rename the original file, then copy the new one in.
I recommend (strongly!) the former since if you screw up you can fix it without a hard reset!
What is wrong with this file?
Hello,
I'd like to ask for some expert help.
I finally managed to edit an EXE file from Windows - just translating Japanese text to English. I used the MEditor suite. After saving, I "dropped" the file onto the SignCode.exe as per instructions.
When I transferred the file to its original location and overwrote the original one, I get:
"Cannot open... A critical component is either missing or cannot start because program memory is unavailable...."
I am sure I didn't change anything else but texts. So what could be wrong?
I am attaching the two files - the original and the edited - for someone to please look at them and let me know if there's anything I can do. This is Sharp's Barcode Reader.exe
Thanks!
Hi everyone,
I'm posting a method today which i use to backup my XAP files and favorites. I hope that they will help others too and I'm posting some other tips too which i gathered around from the web and XDA. I will be constantly updating this post.
Most of the tips I've provided here are only for Fully Unlocked Phones
Backup .XAP files downloaded from Zune Marketplace
Access your phone's files using any File manager FileBrowser by ego zheng, Unique File Manager by Mohsen Unique Or TouchXplorer by julien Schapman.
Both FileBrowser and Unique file manager can open XAP files but TouchXplorer will throw an exception.
Open FileBrowser and Goto /My documents/Zune/PimentoCache/Lib/
There should be numerically named folders containing cached XAP files but with .ZMZ extension which will look like this
app0b792c7c-14dc-df11-a844.zmz Copy those files to another folder and rename the extension ZMZ to XAP. You should keep in mind that PimentoCache folder gets cleared after every few days. So you have to copy those files as soon as you've downloaded from the marketplace.
You MUST have XAPdeployer by Ultrashot installed for the following trick to work.
If you want to open ZMZ files in the FileBrowser to see which ones you are copying or renaming. Launch Registry Editor by Julien Schapman open HKEY_CLASSES_ROOT create a new key .ZMZ open .ZMZ and create a new String value "Default" enter "xapdeployerfile" in the value and tap OK. Now you can open ZMZ files in the file browser.
Backup XAP files downloaded with Bazaar App
Using Phone's file manager Or Windows Explorer on computer Goto
Application\Data\9daf0fc-a0ee-4cfc-905a-cc812d678a35\Data\IsolatedStorage
all homebrew XAPs downloaded from Bazaar will be in this folder.
Backup XAP files downloaded with wPhoManager
If you download files with wPhoManager from W.I.N.C.O marketplace all the XAPs downloaded will be in
Applications\Data\8A011F29-D5A3-4942-B865-71198AAB94AE\Data\IsolatedStorage
Screen Goes Blank during Incoming/Outgoing calls
I had this problem sometime ago when my HD7 fell real hard and started giving these problems. So I searched the web and found this solution from some website. If you are having problems (Blank screen and inaccessible phone) while incoming/outgoing calls it has to do with the proximity sensor. It goes out of alignment and that results in the black screen during the call. While the call is active, since the screen is essentially turned off by the proximity sensor, I can’t use the keypad or even hang up the call!
The fix is to press down hard on the area where the proximity sensor is. It’s located at the top of the screen – pretty much where the HTC logo is. Just press hard on that area and that should move the sensor back into place.
Backup Internet explorer's Favorites
Browse to /Windows/Favourites and copy all the content to a folder of your choice. Put them back in after you've reset your phone or installed a new firmware. You can also use IE fav Backup by Sh4d0w86 that's also a pretty good app for doing this task.
Saved Office mobile files OR copy Documents from computer to phone
All your Word, Excel, Powerpoint files you saved on your phone are stored in My documents. If you have files in your computer and you want them on your phone. Just copy all those to My documents and they will be in your files list.
Record incoming/outgoing calls complete with environmental effects
This trick does not even need any sort of unlock. Call any number on speaker and press the camera button Switch to Video Recording mode and tap Record. Your call will be recorded in a video use VirtualDub(or any other audio extraction software) to extract the audio and Audacity to reduce environmental effects if there are any.
ZIP files
By default downloaded ZIP file's content (Which can open by default in Windows Phone 7)is in Applications/Volatile/ZipView/(This folder gets deleted when you close the ZIP file, So you have to keep the ZIP file open until you've copied). but the limitation is that you have to open each file individually. But if you want to download the complete file without any content limitation. Do the following method :-
»Open your file manager on your phone OR windows explorer on PC.
»Goto \Windows\Profiles\Guest\Temporary Internet Files\
»There should be folders with names like 9FADAF33, Q110E4PZ, U0GWIYEF and U2QKY63D(exact names can differ)
»Your downloaded ZIP file will be in one of these four folders.
»Copy/Paste downloaded ZIP file to another location where you keep your files.
This method is helpful if you are downloading ZIP files which contains DLLs, EXE or any other format files which WP7 cannot open.
Download WinRar, CAB, 7Z files
Windows phone 7 does not recognize these file types so it will not download these files if you want to. With the following tip you can download these files to your phone.
»Start your phone's Registry Editor and tap HKEY_CLASSES_ROOT
»Create three new keys .Rar, .cab, .7z
»Open each key and create String "Default" with "Zipfile" as a value
»Now you can download Winrar, 7Zip, and CAB files in Internet Explorer.
If any of the above tips helps u out a little please hit thanx or reply if you have any question or suggestion.
I will add shortly:
xap handler = new registry key HKCR/.zmz and string value: Default -xapfile
unique file manager extract zipfile
Download WinRar, CAB, 7Z files
Windows phone 7 does not recognize these file types so it will not download these files if you want to. With the following tip you can download these files to your phone.
»Start your phone's Registry Editor and tap HKEY_CLASSES_ROOT
»Create three new keys .Rar, .cab, .7z
»Open each key and create String "Default" with "Zipfile" as a value
»Now you can download Winrar, 7Zip, and CAB files in Internet Explorer.
If any of the above tips helps u out a little please hit thanx or reply if you have any question or suggestion.[/QUOTE]
Thanks for the valuable info.
Great job
It did and did not work
The rar file can be downloaded, but wp7 cannot read it or recognize it, it shows corrupted file or unreadable file by the system.
It seems we need rar code to be native so we will be to open rar files.
meover said:
Download WinRar, CAB, 7Z files
Windows phone 7 does not recognize these file types so it will not download these files if you want to. With the following tip you can download these files to your phone.
»Start your phone's Registry Editor and tap HKEY_CLASSES_ROOT
»Create three new keys .Rar, .cab, .7z
»Open each key and create String "Default" with "Zipfile" as a value
»Now you can download Winrar, 7Zip, and CAB files in Internet Explorer.
If any of the above tips helps u out a little please hit thanx or reply if you have any question or suggestion.
Click to expand...
Click to collapse
Thanks for the valuable info.
Great job
It did and did not work
The rar file can be downloaded, but wp7 cannot read it or recognize it, it shows corrupted file or unreadable file by the system.
It seems we need rar code to be native so we will be to open rar files.
Click to expand...
Click to collapse
The reason why i posted that registry key wasn't to open RAR files but to download them on your phone so you can copy that file to your computer. Because sometimes the content you wanna download is in RAR format.
jashd7 said:
Thanks for the valuable info.
Great job
It did and did not work
The rar file can be downloaded, but wp7 cannot read it or recognize it, it shows corrupted file or unreadable file by the system.
It seems we need rar code to be native so we will be to open rar files.
Click to expand...
Click to collapse
The reason why i posted that registry key wasn't to open RAR files but to download them on your phone so you can copy that file to your computer. Because sometimes the content you wanna download is in RAR format[/QUOTE]
thanks again, really great job.
I see.
But I hope we can:
Open rar file and extract content like PDF, media file, etc.
I really need 2 task:
Open PDF file within the browser.
Can print the PDF over wireless printer.
they are not accomplished missions yet
meover said:
The reason why i posted that registry key wasn't to open RAR files but to download them on your phone so you can copy that file to your computer. Because sometimes the content you wanna download is in RAR format
Click to expand...
Click to collapse
thanks again, really great job.
I see.
But I hope we can:
Open rar file and extract content like PDF, media file, etc.
I really need 2 task:
Open PDF file within the browser.
Can print the PDF over wireless printer.
they are not accomplished missions yet [/QUOTE]
i hope too but WP7 is closed like a fort, it's not developer friendly and it's really hard and time consuming to do modifications or add new features. You can put some minor things here and there but nothing too big.
Hello!
I copied and moved some .zmz file in my pc.
I renamed them in .xap and tried to deploy them into my HTC 7 Pro with Dynamics 1.21 ROM.
I tried with WPH Xap Deployer, wf Phone Tools and Phone7Deployer, but I only got errors (failed to open the manifest file. This may not be a valid xap).
I suppose this should be related to app encription...
So now, also without Reinstaller working, if we make whatever can delete the apps from the phone, we will have to pass through the marketplace, with app list opened on Zune on our pc... :crying:
Otherwise, a way could be:
1) to know an app's guid, i.e. with cache clearer
2) use a storage explorer on pc, like windows phone device manager and go to
application/Install/(application guid);
3) copy that folder into pc
4) right click on the folder to create a zip file
5) change the extension of the zip file to xap (you can do it at the end, there
some softwares for file renaming...)
A long way if you have some tenth apps installed...
lordmago said:
Hello!
I copied and moved some .zmz file in my pc.
I renamed them in .xap and tried to deploy them into my HTC 7 Pro with Dynamics 1.21 ROM.
I tried with WPH Xap Deployer, wf Phone Tools and Phone7Deployer, but I only got errors (failed to open the manifest file. This may not be a valid xap).
I suppose this should be related to app encription...
So now, also without Reinstaller working, if we make whatever can delete the apps from the phone, we will have to pass through the marketplace, with app list opened on Zune on our pc... :crying:
Otherwise, a way could be:
1) to know an app's guid, i.e. with cache clearer
2) use a storage explorer on pc, like windows phone device manager and go to
application/Install/(application guid);
3) copy that folder into pc
4) right click on the folder to create a zip file
5) change the extension of the zip file to xap (you can do it at the end, there
some softwares for file renaming...)
A long way if you have some tenth apps installed...
Click to expand...
Click to collapse
You are right about apps encryption. Microsoft recently encrypted all their XAPs on marketplace.
jashd7 said:
You are right about apps encryption. Microsoft recently encrypted all their XAPs on marketplace.
Click to expand...
Click to collapse
Nonetheless, if we've got encrypted XAPs specific to our devices, we ought to be able to install them on the device somehow from within the device. We'd just need to initiate the install routine. Does anyone know how to do this?
Thanks
What I am interested in, is a way to take my games save states and back them up. I'm sick of restarting Angery Birds every time I flash my phone. lol Rest of this is super interesting stuff though.
TheXev said:
What I am interested in, is a way to take my games save states and back them up. I'm sick of restarting Angery Birds every time I flash my phone. lol Rest of this is super interesting stuff though.
Click to expand...
Click to collapse
Did you try to look into the Angry Birds folders in your device if it saves something,
for example using FileBrowser (http://forum.xda-developers.com/showthread.php?t=1544399) or Webserver from GoodDayToDie?
If there's something there, you should be able to copy your states in your pc and put them back in your device, I think...
TheXev said:
What I am interested in, is a way to take my games save states and back them up. I'm sick of restarting Angery Birds every time I flash my phone. lol Rest of this is super interesting stuff though.
Click to expand...
Click to collapse
You can use Program Manager by ego Zheng to backup your angry birds settings. You just have to put your saved settings in your angry birds folder after you've flashed.
Here's the link to program manager
http://forum.xda-developers.com/showthread.php?t=1922454
Your saved XAP files will be in Applications\Data\12345678-87bf-4d87-a529-0dff41efd592\Data\IsolatedStore\Xap
Your Data backups will be in \Applications\Data\12345678-87bf-4d87-a529-0dff41efd592\Data\IsolatedStore\Data