Hi, my name is kostas and I recently become owner of a Blackstone!
After searching the forum about themes and how to create them, I decided to try and create one. That's when my problems started!
First I copied the windows folder from my device to my pc, then with manila editor I extracted the icons that I wanted to change and edit them in photoshop. After that, I replaced them to the manila files with manila editor.
When I tried to copy the new manila files to my device I got a message which says that I cannot copy them to the windows folder.
Then I used QuickCab to install the files from my phone but after the installation I started the TF3D and the old icons were shown.
What should I do to make this work?
koiranos said:
Hi, my name is kostas and I recently become owner of a Blackstone!
After searching the forum about themes and how to create them, I decided to try and create one. That's when my problems started!
First I copied the windows folder from my device to my pc, then with manila editor I extracted the icons that I wanted to change and edit them in photoshop. After that, I replaced them to the manila files with manila editor.
When I tried to copy the new manila files to my device I got a message which says that I cannot copy them to the windows folder.
Then I used QuickCab to install the files from my phone but after the installation I started the TF3D and the old icons were shown.
What should I do to make this work?
Click to expand...
Click to collapse
If you used File Explorer to replace the files, most times it does not allow you to return them. The safest is probably to first disable TF3D (Settings\Today) and then use something like to Total Commander or Resco to replace the files in Windows. Soft reset and re-enable TF3D.
thanks for the advice. I'll try it and see what happens
koiranos said:
thanks for the advice. I'll try it and see what happens
Click to expand...
Click to collapse
Pleasure bro, hope it works for you. You can also look at HD Wall which allows you to create your own slider with your icons and then creates a cab for you to install.
ClydeB1 said:
If you used File Explorer to replace the files, most times it does not allow you to return them. The safest is probably to first disable TF3D (Settings\Today) and then use something like to Total Commander or Resco to replace the files in Windows. Soft reset and re-enable TF3D.
Click to expand...
Click to collapse
Alternatively you can use Sashimi to copy the files to your Windows directory! But Total Commander should work just fine...
Related
Hi Folks,
i found a trick to make an autoinstall from strorage card (like from extended Rom)!
autorun.exe looks for the file config.txt on the place is in registry stored in:
"HKLM\Comm"
"AutoRunCFG" = "\Speicherkarte\Autoinstall\config.txt"
so i changed the registry entry and now i am able to put config.txt and the files to install on every place i want.
on windows Mobile 2003 devices this works wonderful!
on problem i have now with windows mobile 5 devices:
when installing a question appears where to store files (device or storage card)!
can anybody help me to get rid of this question during automatic cab install??
i want install all cab files to device without any questions!!
pbelcl: apologies for my ignorance, but is this very different to a 2577 folder?
with a 2577 cab we could use this info:
http://forum.xda-developers.com/viewtopic.php?p=225375#225375
and choose a default install folder I think for WM5.
V
Thanks for your quick answer!
i read the other tread and if i understood it right i have to remove the .dll file from my cabs?
i'll try this and tell you if it worked ....
I think the other way round.
I've never done it before, but you need to make a custom cab and .inf file, and specify the installation location in therere, and then the "choose a location" dialog doesn't come up. I'm not sure, I'll try this at home later.
V
vijay555 said:
...I'll try this at home later.
Click to expand...
Click to collapse
Thanks, that would be interesting for me because i cant generate cab files because i hav no developer software for this.
i also have access to a cab file manager (at a customer) where i can edit the cab files and change them as i need it.
if it is possible to generate an "empty" cab file for me that would be nice ....
pbelcl: I never use the cabwizard either, I use cab manager. To make an empty cab, take any normal cab (download one of mine?) and just remove all the files from it. That's what I always do!
V
vijay555 said:
.just remove all the files from it. That's what I always do!V
Click to expand...
Click to collapse
ok, this is also my way to get an empty cab file
there is one question interesting:
Sometimes there is a "CheckFile.exe" and a "CeSetup.dll" in the cab file.
Do i need them for any work during install this cabfile or can i delete them also?
I remove everything from my cabs, and then use cab manager and drag and drop stuff. So I've never used those files. I will have to read up on how to make a "normal", but I don't think they're necessary if you didn't put them in there!
V
Hi folks,
again my last problem with automatic install on WM5 devices:
when my automatism starts to install the cab files (from where ever) each time there comes a popup windows where to install the cabfile (storage card or device).
for my routines it is not important becaue most of my cab files only set some registry keys and dont install files on the device!
Does anybody know how i can get rid of this window and install the files to device WITHOUT question popup window??
Hi,
I would like to change the green Windows Mobile screen when i boot my device. I have extracted the Welcomehead.png from my device and made another in Photoshop. Saved it as Welcomehead.png. I paste it in the windows folder and overwrite the original png. When i reboot i thought i would see the new picture but no luck here. Still the same green WM picture. What can i do to make this work for me?
make sure its not READ-ONLY(chk its attributes)
are you sure you replaced it? you can't replace it with Active-Sync, use a filemanager on your PPC to copy/cut the file and then paste it in the windows folder.
@ ather90
How do i check if it's read only or not?
@ me_
Yes I'm sure. This is what i did. I made the new png-file and made a rar-file, I copied it to my Card and extracted it there. From there i pasted it into the windows folder. I just did it again and it asks me if i want to overwrite it, yes in this case so it must be overwritten. Again, after reboot nu luck.
If you have an image viewer on your device, check that the file in the \Windows directory is now showing your new image.
Biomehanika said:
If you have an image viewer on your device, check that the file in the \Windows directory is now showing your new image.
Click to expand...
Click to collapse
Sorry for the late reaction, had to work.
I have checkt this and no it does not show up when i scan the images in the Windows-folder. Can anyone tell me what the right procedure is to make this work?
It should be named welcomehead.96.png not welcomehead.png - you should use total commander to overwrite the file and the welcomehead.96.png should be no larger than 100kb to work.
meschle said:
It should be named welcomehead.96.png not welcomehead.png - you should use total commander to overwrite the file and the welcomehead.96.png should be no larger than 100kb to work.
Click to expand...
Click to collapse
And this time it works. Thank you Meschle and others.
Hey! Can I change my start menu button image on wm6.1? I mean is there this image exist somewhere in the windows folder so I can replace it like the boot screen? (without any 3rd party apps like wisbar)
Thank you!
TKL
any idea?
2 ways useing the program called wisbar google it
or make your own rom from scratch and hack some dll which include the image you can also find a description somewhere in the forum which dll not for most peoples though
but which dll..I'm gonna search the forum for this. Thank you!
Rudegar said:
2 ways useing the program called wisbar google it
or make your own rom from scratch and hack some dll which include the image you can also find a description somewhere in the forum which dll not for most peoples though
Click to expand...
Click to collapse
i can't say for sure but i think its the shellres.dll file that has the image in it
Where is shellres.dll located?? I can't find it.
Edit: I found it And how can I replace the image in the dll? I can't even copy it out from the windows folder... I tried with total commander but no luck :S
as i said you have to cook your own rom from scratch on the computer to get the dll into it
pretty much what all the people who make roms in this forum does so as i said it's not something for the most users
you can prob read about how start learning to cook roms in the wiki pages of your device
you can do this without cooking it into the rom. With WM6 the file is shellres.96.dll. Use reshacker to replace icon number 288, then you must "sign" the DLL using this:
http://forum.xda-developers.com/showpost.php?p=1262575&postcount=1
finally, copy it into the windows folder (you may have to rename the old one first)
soft reset and you should be good to go!
since you're having problems copying it I've attached a copy
BTW if you do this and it screws up your title bar icons it probably means that WM6.1 uses a different DLL. To fix it just delete or rename the DLL and reset.
i looked for this file on my wing (it has wm6) and there is a file named shellresapps.96.dll, so i am sure that it's probably not the same file....and it will not allow me to copy it to my pc so i can look inside of it, any ideas?
More help
I tried with replacing icon but it seems rshacker doesn't save that.
i mean icon not changed.
i used a 21x21 icon its of same size of original one.
please help
joemanb said:
you can do this without cooking it into the rom. With WM6 the file is shellres.96.dll. Use reshacker to replace icon number 288, then you must "sign" the DLL using this:
http://forum.xda-developers.com/showpost.php?p=1262575&postcount=1
finally, copy it into the windows folder (you may have to rename the old one first)
soft reset and you should be good to go!
since you're having problems copying it I've attached a copy
BTW if you do this and it screws up your title bar icons it probably means that WM6.1 uses a different DLL. To fix it just delete or rename the DLL and reset.
Click to expand...
Click to collapse
I'm gonna give this a try later, thx!
mailforkrishna said:
I tried with replacing icon but it seems rshacker doesn't save that.
i mean icon not changed.
i used a 21x21 icon its of same size of original one.
please help
Click to expand...
Click to collapse
hmmm..? my icon is 21x18 and it worked in ResHacker
Hi guys,
I'm now trying to install the start menu icon for 4 days. (Yes I used the search function etc.).
What did I do:
Download 2 files/installed: Icon demarrer.cab and Start Menu Scerts.cab
Downloaded icons: shellres.96.dll
Renamed this shellres to my language: shellres.96.dll.0413.mui
Copied it to My documents (on my phone)... From then on I copied it into the windows folder and replaced it.
When I soft reset, nothing changes....
PS: I tried using total commander but I can't find my phone in it...
did u try to move the file instead of copy?
can u find the actual files? if not its hidden.....
WingZer0n said:
did u try to move the file instead of copy?
can u find the actual files? if not its hidden.....
Click to expand...
Click to collapse
Well, in windows I can't see my windows folder from the phone. So what I actually did was just copy the shellres to mydocuments and then cutted/pasted the file using the phone.
The phone is the onyl place were I can see the windows folder.
Should I use a tool like total commander?
Does anyone know how to hide the HTC clock (not flipping it up to make it smaller) completely while keeping TouchFlo3D activated?
I want the home screen has has completely nothing on it to show the whole wallpaper.
freshgear.files.wordpress.com/2008/11/htc-touch-hd-screen-main.jpg
Like from the picture above, I want to hide:
The Time (10:20)
The date
The alarm off text
The call history and calander text
So just a blank screen w/o anything while keeping TouchFLO3D running.
Hi
yes it is possible
I have to know what kind of phone you'v got, to help you
lumisab said:
Hi
yes it is possible
I have to know what kind of phone you'v got, to help you
Click to expand...
Click to collapse
I have the Touch HD T8282 with WindowsMo 6.1 (one that came with the phone)
netwr said:
Does anyone know how to hide the HTC clock (not flipping it up to make it smaller) completely while keeping TouchFlo3D activated?
I want the home screen has has completely nothing on it to show the whole wallpaper.
freshgear.files.wordpress.com/2008/11/htc-touch-hd-screen-main.jpg
Like from the picture above, I want to hide:
The Time (10:20)
The date
The alarm off text
The call history and calander text
So just a blank screen w/o anything while keeping TouchFLO3D running.
Click to expand...
Click to collapse
You can use TouchFlo Detacher to assign operations (show/hide/close)
Hi
what you have to do is,you have to change 17 manila files to transparency and the mode9 file 1c684cd8_manila.I did it already for you,because I changed my homescreen too.Important is,go in you phone windows directory (Windows) and save all the files what you will overwrite with this procedure to you computer to be on the save side,because it could be you change you mind sometimes,and you never know what could get wrong.If not,you will have to make a hard reset with you phone to go back to you original state,copy all the files in your PHONE WINDOWS DIRECTORY (WINDOWS)
lumisab said:
Hi
what you have to do is,you have to change 17 manila files to transparency and the mode9 file 1c684cd8_manila.I did it already for you,because I changed my homescreen too.Important is,go in you phone windows directory (Windows) and save all the files what you will overwrite with this procedure to you computer to be on the save side,because it could be you change you mind sometimes,and you never know what could get wrong.If not,you will have to make a hard reset with you phone to go back to you original state,copy all the files in your PHONE WINDOWS DIRECTORY (WINDOWS) I make a download link underneath with all the files in it.keep me posted
Click to expand...
Click to collapse
Are all the files from your ZIP stored under a specific folder in Windows? I browsed the Windows folder in my phone and found the exact file names that matched the ones you have attached, but they are not in PNG (all the files just have a Windows icon), are those the ones?
Hi
I'v got something better for you,use the cfc_gui tool from chainfire,what you have to do is,copy all manila files to you computer,open it up with the cfc_gui tool,it takes a couble a secound to open it, in this tool you will then find all you manila files,if you tick of one file you will see all his content,size,name and picture, you can than save each one on you computer separately and work or change something on it with photoshop or others, if you in the cfc_gui tool go to the (home\vga files) because that a the files for the clock,if you make all the files transparent than the clock will disappear,you can do a lot with this tool,of course you have to be connectet with you phone to the computer to save the alteret files back again to you phone,and don't worry this tool save all you files to the right place in you phone if you use the cfc_gui tool than you don't need the zip file any more you can choose you own method and do what you want, underneath the download link.
lumisab said:
Hi
I'v got something better for you,use the cfc_gui tool from chainfire,what you have to do is,copy all manila files to you computer,open it up with the cfc_gui tool,it takes a couble a secound to open it, in this tool you will then find all you manila files,if you tick of one file you will see all his content,size,name and picture, you can than save each one on you computer separately and work or change something on it with photoshop or others, if you in the cfc_gui tool go to the (home\vga files) because that a the files for the clock,if you make all the files transparent than the clock will disappear,you can do a lot with this tool,of course you have to be connectet with you phone to the computer to save the alteret files back again to you phone,and don't worry this tool save all you files to the right place in you phone if you use the cfc_gui tool than you don't need the zip file any more you can choose you own method and do what you want, underneath the download link.
Click to expand...
Click to collapse
I think I cannot use this method because I do not use a Windows computer and cannot connect between computer and phone.
Basically, I just need the things highlighted in neon green in the attached photo to disappear while keeping everything unchanged.
From your first method, I found the files that you put in the ZIP under my phone's Windows folder, but the ones in the phone's Windows folder are not PNGs.
Can you confirm if those are the correct files to replace?
Also, if I just need the few things from the attached photo to disappear, do I have to replace every file with the ones from your ZIP?
Hi
to you first question:how do you copy the files in you phone without computer
to you secound question:that what you highlighted on you phone that is exactly the 17 manila files,you will find in the new zip files the description of all the manila files
to you third question:the manila files a all alteret from PNG to QTC otherwise it would nothing happen when you copy them to the win directory,it was my mistake I should have mention it early in the post before, apology for that
to you fourth question:use the files in the new zip for what I will make a download link underneath thats the right files
to you fifth question:yes all the few things on you photo is all the 17 manila files, look in the description in the new zip file you will see that you need all the files,it is all explaind
something else use the mode9 file 16c84cd8_manila only if you can still someting see on you clock and screen
as you can see on my homescreen no clock
lumisab said:
Hi
to you first question:how do you copy the files in you phone without computer
to you secound question:that what you highlighted on you phone that is exactly the 17 manila files,you will find in the new zip files the description of all the manila files
to you third question:the manila files a all alteret from PNG to QTC otherwise it would nothing happen when you copy them to the win directory,it was my mistake I should have mention it early in the post before, apology for that
to you fourth question:use the files in the new zip for what I will make a download link underneath thats the right files
to you fifth question:yes all the few things on you photo is all the 17 manila files, look in the description in the new zip file you will see that you need all the files,it is all explaind
something else use the mode9 file 16c84cd8_manila only if you can still someting see on you clock and screen
as you can see on my homescreen no clock
Click to expand...
Click to collapse
To answer your question, I only use bluetooth to transfer files between my computer and phone.
By replacing the files with ones above, will it cause any problem if my ROM isn't english?
Is there a quicker way to backup all 18 original files in case someday I want the clock back, instead of copying one after one from the Windows folder?
Just to confirm, your ZIP above has 18 files (excluding the capture.PNG)
One last question, how do make the menu bar transparent (like from your home screen above) and change all the icons at the bottom of the screen?
Hi
no it cause no problems for you ROM,
no quicker way to copy files from you win phone folder,if you would have a connection to you phone via computer it would take a few secound to copy,
zip files have 18files 17 manila and one mode9 file,+PNG
for you last question:to get the transparency for the taskbar I cooked it in my ROM after that I flashed it to my phone,I'v got a cab file that promised to do that same with the taskbar,I never try it because I cooked it already in my ROM,if you want to try it I will make a download link, if it dosen't work you can delete it again from you device,to the icons you can use the HDWall tool to create the icons