Dear All,
I need locking program to have a pasword when executing an EXE fail from Programs to ask for a password. For example i am using Vito.Audio. Notes for recording all my calls and doesn't wont someone who have acces to my phone to hear all my calls.
Thankks in advance.
Related
i have startup password for my device wizard, i forget the password so the device is working i can receive phone calls but i can not use the other option ,i try to reset but paassword is still there so how to solve this please let me know .......
goto the wiki page above, and read section how to make a hardreset to reset phone to factory setting, clearing all the stuff inside, including SMS, contacts, notes, calendar, etc.. and your password.
hi ,
first, sorry for my bad english.
i have search here and over the net but i have nothing found.
the problem is:
we have a few Tytn in use in our enterprise.
we are member of a Ad forest.
as we try to connect one Tytn to a exchangeserver it must accept a role
that it must have a password.
it is not the pin for the sim.
the settings for this password are under start-settings-locks.
after the try we would go back to use the Tytn without the password.
but it cannot unlock. you cannot uncheck because it is lightgrey. so i think it it is a gpo. this settings lock the pda after 30 min. and you must enter your password what usually is not needed. That is also happens when you navigate with the pda.
has anybody a solution for this?
thanks for any answers
michael
axisminden said:
hi ,
first, sorry for my bad english.
i have search here and over the net but i have nothing found.
the problem is:
we have a few Tytn in use in our enterprise.
we are member of a Ad forest.
as we try to connect one Tytn to a exchangeserver it must accept a role
that it must have a password.
it is not the pin for the sim.
the settings for this password are under start-settings-locks.
after the try we would go back to use the Tytn without the password.
but it cannot unlock. you cannot uncheck because it is lightgrey. so i think it it is a gpo. this settings lock the pda after 30 min. and you must enter your password what usually is not needed. That is also happens when you navigate with the pda.
has anybody a solution for this?
thanks for any answers
michael
Click to expand...
Click to collapse
Which rom are you using?
Hi,
i use this rom.
Sorata4u_v1.1_WM6.1_Pro_based_on_ANRYL_KITCHEN_19212_GER it works great.
But i believe that this it's not the reasson.
Because we have try to connect to the exchangeserver with 3 Htc Tytn.
All have the same problem. The other 2 have Official Htc Rom WM 6 .
Now, i have found the answer.
Modify the registry key below to disable the Security policy on the device:
Enable/Disable Exchange Security Policy
Registry Key: HKLM\Security\Policies\00001023
To enable it: Set value to 0
To disable it: Set value to 1
everything works fine. After this setting you can uncheck start-settings-locks.
thanks a lot
michael
Great! Works fine to me, and no need restart.
i need a coach. i have a freshly flashed verizon samsung i910. it is making/recieving calls. i have all the correct settings for metro for the sms/mms/ dialing #777 etc... EXCEPT!!! I can NOT get the password "metropcs" to stick when i enter it into the settings. I have a verizon vx6800 "ntc titan/mogul" I had it flashed to metro, and put all the same settings into it, and it's password stayed in place. All is working purrrfect on it. mms/sms/pic&text/calls/gps/instant messaging, etc.. I have been told that on the omni i910, the password has to be edited via computer/usb cable..reg edit.. perhaps. If i knew what/where to edit i feel confident enough to try it. can anyone direct me with good info, as to what software to use, and where in the registry, i need to edit? I have mobile reg editor, and qpst, and active sync installed, as well as tcmdpocketarm total commander for pocket-pc. i really want to get this phone working, someone please come to the rescue. my email is [email protected] cell# 707-413-8127...augie. and thanks in advance...
augie1 said:
i need a coach. i have a freshly flashed verizon samsung i910. it is making/recieving calls. i have all the correct settings for metro for the sms/mms/ dialing #777 etc... EXCEPT!!! I can NOT get the password "metropcs" to stick when i enter it into the settings. I have a verizon vx6800 "ntc titan/mogul" I had it flashed to metro, and put all the same settings into it, and it's password stayed in place. All is working purrrfect on it. mms/sms/pic&text/calls/gps/instant messaging, etc.. I have been told that on the omni i910, the password has to be edited via computer/usb cable..reg edit.. perhaps. If i knew what/where to edit i feel confident enough to try it. can anyone direct me with good info, as to what software to use, and where in the registry, i need to edit? I have mobile reg editor, and qpst, and active sync installed, as well as tcmdpocketarm total commander for pocket-pc. i really want to get this phone working, someone please come to the rescue. my email is [email protected] cell# 707-413-8127...augie. and thanks in advance...
Click to expand...
Click to collapse
Welcome to the forum
Perhaps you have not noticed this is an HTC devices only forum
However if you go to off topic section there is a trhead about samsung
Good luck,
p.d I recommend you to erase your pesonal data from your post
Used the ROM of Don Salari -3/8/10. Applied Tachi Disabler, Installed Cab for Original HTC Phone. Now the ringer does not give any sound. I cannot also call from the Contacts after selecting a contact. Applied the original cab for Quick GPS, but it cannot download the update, says connection error. Using Activesync, is updating the weather properly, only QuickGPS, not updating.
Kindly, someone pls help on the matter
Thanks
Mice
Hi guys,
First post, so, firstly, hello! I've been using this website for a while,
I have a question that need to help.
I'm using S620 n I have installed App F-Secure Mobile Security to Anti-theft only.(this app will send a private message to me when SIM changed.)
To enable Remote Lock Function, I must set my S620 locked.
However if the device locked, when U start your device, it will require to type your password. How must I do to disable this func. when starts. Because when my device is stolen, if it locked, the theft can hard reset all.
It want to be a Remote Control and a Remote Lock that the theft don't know!
I tried to search and found "Device Lock.exe" and "Device Lock.mui" files in Windows Folder but I can't open Device Lock.mui
Thanks!