hi ,
first, sorry for my bad english.
i have search here and over the net but i have nothing found.
the problem is:
we have a few Tytn in use in our enterprise.
we are member of a Ad forest.
as we try to connect one Tytn to a exchangeserver it must accept a role
that it must have a password.
it is not the pin for the sim.
the settings for this password are under start-settings-locks.
after the try we would go back to use the Tytn without the password.
but it cannot unlock. you cannot uncheck because it is lightgrey. so i think it it is a gpo. this settings lock the pda after 30 min. and you must enter your password what usually is not needed. That is also happens when you navigate with the pda.
has anybody a solution for this?
thanks for any answers
michael
axisminden said:
hi ,
first, sorry for my bad english.
i have search here and over the net but i have nothing found.
the problem is:
we have a few Tytn in use in our enterprise.
we are member of a Ad forest.
as we try to connect one Tytn to a exchangeserver it must accept a role
that it must have a password.
it is not the pin for the sim.
the settings for this password are under start-settings-locks.
after the try we would go back to use the Tytn without the password.
but it cannot unlock. you cannot uncheck because it is lightgrey. so i think it it is a gpo. this settings lock the pda after 30 min. and you must enter your password what usually is not needed. That is also happens when you navigate with the pda.
has anybody a solution for this?
thanks for any answers
michael
Click to expand...
Click to collapse
Which rom are you using?
Hi,
i use this rom.
Sorata4u_v1.1_WM6.1_Pro_based_on_ANRYL_KITCHEN_19212_GER it works great.
But i believe that this it's not the reasson.
Because we have try to connect to the exchangeserver with 3 Htc Tytn.
All have the same problem. The other 2 have Official Htc Rom WM 6 .
Now, i have found the answer.
Modify the registry key below to disable the Security policy on the device:
Enable/Disable Exchange Security Policy
Registry Key: HKLM\Security\Policies\00001023
To enable it: Set value to 0
To disable it: Set value to 1
everything works fine. After this setting you can uncheck start-settings-locks.
thanks a lot
michael
Great! Works fine to me, and no need restart.
Related
Hi all,
Is there a way to disable this? It's driving me crazy - each time I connect the HTC Touch HD to the computer, instead of syncing it tries to share the phone's GPRS with the PC (which I dont want/need)..
Is there a way of permanently disabling internet sharing on the phone? I need activesync back!
cheers for any help..
*BUMP* IO have this problem please help
Take a look at this post.
http://forum.xda-developers.com/archive/index.php/t-271174.html
I was having the same problem and it did the work.
Basically this is the solution that works for me.
you can also use a registery hack:
use your favourite regeditor;
change
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDri ver“=“RNDIS“
into:
HKLM\Drivers\USB\FunctionDrivers\“DefaultClientDri ver“=“Serial_Class“
Click to expand...
Click to collapse
I have the same problem.
Editing the registry didn't work, I can't change to Serial_Class because it is already Serial_Class.
I have found the way to solve this....damn easy.
Today, is my second time I faced this problem. During the 1st time, I have tried many ways: restarts, edit registry, delete and add settings, but it didn't work, finally I reset the PDA and re-install all my programs. Damn!
The way to resolve this problem is: let it connects the internet sharing once, then unplug the USB cable and reconnect!!! I will automatic let you choose whether to connect as "ActiveSync", "Disk Drive" and "Internet Sharing", so you choose back the "ActiveSync". That's all....easy right?
yjjason said:
I have found the way to solve this....damn easy.
Today, is my second time I faced this problem. During the 1st time, I have tried many ways: restarts, edit registry, delete and add settings, but it didn't work, finally I reset the PDA and re-install all my programs. Damn!
The way to resolve this problem is: let it connects the internet sharing once, then unplug the USB cable and reconnect!!! I will automatic let you choose whether to connect as "ActiveSync", "Disk Drive" and "Internet Sharing", so you choose back the "ActiveSync". That's all....easy right?
Click to expand...
Click to collapse
cheers for that it was driving me nuts!!
i wanna ask something,now i've used HTC Mogul with WM6.5 from Ryan Mogul....
i tried to sync my contact to google with this instructions :
1. Open the Active Sync application on your device's home screen.
2. Click Set up your device to sync with it.
3. Enter m.google.com as the server address.
4. Ensure that the SSL option is selected.
Sign In to Your Google Account
5. Click Next.
6. Enter your full Google Account email address as the User name.
7. Enter your Google Account password as the Password.
8. Leave the Domain field empty. If your device requires you to enter a domain name, enter google.
9. Click Next.
10. Check Contacts, Calendar, or Email, depending on which you'd like to sync. (Tasks is not supported and will lead to an error if checked.)
11. Click Finish.
12. Press the Sync softkey on the left to synchronize.
From :
http://www.google.com/support/mobile/bin/answer.py?answer=138636&topic=14299
But i cannot sync it....
anyone know how to fix it?
what doesnt work?
that works fine for me .
fards said:
what doesnt work?
that works fine for me .
Click to expand...
Click to collapse
wow.....
on WM6.5?
yes perfectly, on both 6.5 and 6.5.x
it's how I often sync my contacts if I can't get to my PC after I've pushed my hd2 too much and forced a hard reset.
Works perfect for me too, on 6.5 and 6.5.3 , nothing changed since 6.1 anyway oO
Cannot understand where your problem is, i took informations from the google sync page (the one you mentioned in your own post) and all worked fine.
Dumb question but... your pc is connected to the internet when you sync it?
Or are you trying without a pc?
I'd like to help but rly man, i do not understand...
http://www.wmexperts.com/google-sync-down-again
maybe this is the issue you have?
or it could be how you're doing it, or even something in how the person who cooked the rom you're using did.
fards said:
http://www.wmexperts.com/google-sync-down-again
maybe this is the issue you have?
or it could be how you're doing it, or even something in how the person who cooked the rom you're using did.
Click to expand...
Click to collapse
ok....
i'll read it first....
hurayyyy hurayyyyy
problem solved....
thx all
I've searched everywhere but cannot find a solution that works.
I've just got a HTC Desire but cannot get ActiveSync to work. No one other has a Desire with froyo so I cannot get any help here. (they do got iPhones or window phones, which all can sync)
I use the exact same settings as they do, however whatever I do I get "authentication failed", and I know that I user correct domain/user/pass.
I tried owa through the browser and that worked fine. I checked the certificate and that was valid. Any ideas?
We run exchange 2003
go check the exchange original certificate's host name.
This was the problem with my setup.
On 2.1 it didn't care, on 2.2 the domain(host name) must be identical to the actual certificate of the exchange.
yoxler said:
I've searched everywhere but cannot find a solution that works.
I've just got a HTC Desire but cannot get ActiveSync to work. No one other has a Desire with froyo so I cannot get any help here. (they do got iPhones or window phones, which all can sync)
I use the exact same settings as they do, however whatever I do I get "authentication failed", and I know that I user correct domain/user/pass.
I tried owa through the browser and that worked fine. I checked the certificate and that was valid. Any ideas?
We run exchange 2003
Click to expand...
Click to collapse
I'm going to assume you are running Froyo - as most exchange servers require remote wipe and unless your device meets the minimum security requirements it will not work.
Have you installed the certificate? (This may not be necessary as ActiveSync pulls the policies from the server)
Settings > Security > Install from SD Card
Froyo supports ".cer" certificates so you should not have a problem here.
Here is the main thing, in security you need to make sure you do the following:
Change screen lock - make sure you set a PIN password (MUST BE PIN!) If you have pattern password enabled you will not connect.
Lock phone after - this should be set to "Immediately"
After over a week of trying to get it working on my Desire changing to PIN password is what I had to do. Let me know if this works for you.
Failing this download the demo version of TouchDown from the android market and try to connect using the "Automatic" method - if it fails it should give you more details on what the actual problem is or you can always email NitroDesk who make the app for help.
Thanks will try!
tried and it did not help. I'll check with the retards managing our echange. My colleague tried with his user/pass and it worked straight away. there's something wrong with my user i guess.
There is a bug with certain configurations of Exchange 2003 where IIS will throw an error when you log in, if your password is set to expire within 14 days.
Try to log in with outlook web access and see you get "HTTP 401 Unauthorised".
If you do, and press F5 and see if it lets you in. If this happens then you just need to change your password and it should start working on your Desire.
Thanks for your answer st0kes, but it did not help. I can access OWA without any problem. I have tried to set a new password but that did not help either.
UPDATE: Solution found
I was able to get the administrator of the "Good" application at my company to push out a policy for android users to force a longer password. This forced a new password when I opened the application and corrected the problem.
Maybe this will help someone in the future.
I installed an app (Good for Enterprise) to be able to access work email/etc. During setup it required me to set a device password. I set it, through the Good application, but only set it to a 2 character password. I have since uninstalled the application and now I can not change my password. When I attempt to change it I am alerted that password must be 4 characters. Thankfully the device still locks and unlocks with the 2 character password but I was hoping to change it.
Can I mod a file directly to change password or full in thinking it is not set?
Any help would be appreciated.
dave.
running 6.3 rooted fire
So I have got kind of a strange buggy problem. I have an LG G4 with Android 6.0. I recently encrypted my phone with the standard Android encryption method. I used a six character password for this. After about a month my phone prompted that I had to change my password because it had expired. I must change the password in order to gain entry to the phone. So, I click 'change password', type in my old password, click continue and then it returns me to the lock screen?! Locked! It never actually lets me change my password. So I'm kinda stuck.
I tried using software like dr.fone to gain entry to at least save my files, but my phones default pc connection setting is charging and since I can't gain entry, I can't set it to MTP sharing. So I can't even gain entry through my PC.
Is this a known bug? I couldn't find anything on the internet about this. Anybody have any idea? I know I can just factory reset, but I really want to try saving my files. There's some pretty important stuff on my phone.
Thanks in advance,
Greetings,
Luca
lucade2210 said:
So I have got kind of a strange buggy problem. I have an LG G4 with Android 6.0. I recently encrypted my phone with the standard Android encryption method. I used a six character password for this. After about a month my phone prompted that I had to change my password because it had expired. I must change the password in order to gain entry to the phone. So, I click 'change password', type in my old password, click continue and then it returns me to the lock screen?! Locked! It never actually lets me change my password. So I'm kinda stuck.
I tried using software like dr.fone to gain entry to at least save my files, but my phones default pc connection setting is charging and since I can't gain entry, I can't set it to MTP sharing. So I can't even gain entry through my PC.
Is this a known bug? I couldn't find anything on the internet about this. Anybody have any idea? I know I can just factory reset, but I really want to try saving my files. There's some pretty important stuff on my phone.
Thanks in advance,
Greetings,
Luca
Click to expand...
Click to collapse
Bootloader is locked I assume.
So your phone will not let you log in until you change the password but will not let you change the password