USB connection does not work - Touch Diamond, MDA Compact IV ROM Development

hi
i have a diamond that when i connect to the USB cable ,it ask me normaly to chose betwen Activesync and mass storage but whatever i chose nothing happens on my pc and diamond itself.
my pc and my cable are ok because i can sync my friends diomond noramly.
does my diamond have a hardware problem?

adempozhari said:
hi
i have a diamond that when i connect to the USB cable ,it ask me normaly to chose betwen Activesync and mass storage but whatever i chose nothing happens on my pc and diamond itself.
my pc and my cable are ok because i can sync my friends diomond noramly.
does my diamond have a hardware problem?
Click to expand...
Click to collapse
Depending on whether you are using Vista or Xp.
Try this: Go to Start>Settings>Connections>USB to PC
> if there is a check mark by "Enable faster data sych.......Remove and see if this fixes your problem.
Secondly, if you flashed your ROM then make sure you remove the previous Device Partnership in your Activesync settings and make a NEW PARTNERSHIP.
Hope this helps!

i have the same problem i connect my phonr to my pc but it wont establisch a activesync connection

I have also the same problem.
When i connect mij Diamond richt below on mij PC sreen see I the message PC can't reconize mij Diamond (tested on more PC's with differnt cables).
If had someone the solution please mail me !
- Diamond with Hard-SPL Olinex 1.93 and the Dutch ROM v2.03.

hi,
i think my diamond has a hardware problem...because it ask me if i want to use activesync or storage when i plug the charger....

Related

my activesync cant connect with WM 2005

Help why my activesync cant connect with my PPC?
Thanks
Did you use xp sp2 and activesync 4?
I used to have ActiveSync 4.0 problems too... Device manager detected the device but failed to install driver.
In my case it started working once I swaped the cradle's USB connector to another USB jack with the PDA in the cradle.
Windows XP found the "new" device and installed properly this time... Now I can Synch fine through USB.
Also some say that you need to change something on you PPC, so go to Start/Settings/Conenctions/Network Cards and select "Remote-NDIS Host" and change it to "Server-assigned IP address" and then Ok, Ok, Ok...
I hope this helps you...
Rayan

SPL update from internal storage

Hello all and sorry for my English,
I have problems with my HTC Diamond, my computer does not recognize the phone when I connect. USB unrecognized.
I managed to update the rom and radio via the internal drive but not possible for the SPL.
Someone would have an idea.
Edit : Link for update from internal drive : http://htc-touch-diamond.forumactif.../flasher-depuis-le-stockage-interne-t4653.htm
Thank you in advance
Zeux
I have this issue with different USB-cables. Try another cable.
I have tried on several different PC and cable, but the problem is always the same.
ZeuX said:
Hello all and sorry for my English,
I have problems with my HTC Diamond, my computer does not recognize the phone when I connect. USB unrecognized.
I managed to update the rom and radio via the internal drive but not possible for the SPL.
Someone would have an idea.
Edit : Link for update from internal drive : http://htc-touch-diamond.forumactif.../flasher-depuis-le-stockage-interne-t4653.htm
Thank you in advance
Zeux
Click to expand...
Click to collapse
what windows are u usingm if ur using the original usb cable it should work , Try a different usb port on ur computer, not sure what else to suggest
ZeuX said:
I have tried on several different PC and cable, but the problem is always the same.
Click to expand...
Click to collapse
Did you try this:
Start --> settings --> connections --> USB to PC --> DESELECT "Enable Advanced network functionality"
NitroOnTheRocks said:
Did you try this:
Start --> settings --> connections --> USB to PC --> DESELECT "Enable Advanced network functionality"
Click to expand...
Click to collapse
Yes i try and is always the same problem, I also tried with disk drive
What is the current SPL?
You know that Olipro's hardSPL is write protected?
The only way to flash a write-protected it is to use the Soft SPL which is used to flash the hard spl, but change the hard-SPL file with your own SPL file.
Curently my SPL is SPL-1.40.olinex.
Sorry i m french and i dont understand.
It's possible to flash my SPL from internal storage ?
The same to my Phone!!!
Curently my SPL is SPL-1.39.olinex.
My phone cannot link to PC by cable.
I want to know to flash the phone by Mobile itself Memory(Flash Rom)
Hi guys,
same for me here, definitly a USB-hardware failure of the Xda, tried anything possible to connect, hardresets/ROM change, any suggested WinMo options, different cables, different PCs, reinstalling activesync, removing USB-Devices from PCs device manager. Win XP shows "unknown device", no chance to hook it up via cable. Bluetooth sync is possible, though. I'm on Olinex 1.40, so i join the request... anybody has a clue on how to revert it back to the original SPL without activesync?
thx in advance!
Also the same problem for me ! (I'm Dutch)
I've got a branded Vodafone one and had flash my Diamond with SPL-1.93.OliNex and with the dutch HTC ROM (the last one original ROM from the HTC website)
Also no conaction with the USB cable !!!!!!
Is my Phone USB broken ??????????????
Or can i flash mij phone with the internal storage card ?????
Can someone explane how the do that.
THX
Lokje
Is there any way to flash SSPL without using the sspl-manual.exe? The automatic mode would not go into the bootloader.
The issue is that the touchscreen stopped working and now the OS is stuck at "tap screen here" after the hard reset.

i780 usb and activesync problem

Hello!
First, sorry my bad english
I have bought my samsung i780 just for a week. I would like to connect it to my laptop to update the contacts and save the pictures. I installed the ms activesync 4.5 and plugged in the data cable (type: APCBS10BBE and also tried APCBS10UGE). The windows sent me an error message about could not recognise the phone. I have not installed any specific usb driver. I tried plug in and out the cable more times (about 10-15) and once there was a success, the synchronisation was fine. Everytime when i try to connect, i have to repeat the plug in/out procedure about 10-15 times... I am afraid, this is the i780 usb connectors fault Is there any other possibility to fix the problem whithout change the connector?
Could you be so kind to give me some advices?
Thanks
TSanya
Try getting a Bluetooth USB Pen...
Thanks, but i've already tried the bluetooth for connetcting to the activesync. The problem is: I can't set up the bluetooth serial port on the i780 to the same as the pc bt serial...
i have this same problem :/ i made hard reset and after it i cant connect :/
having same problem with my i780 I am at a loss, phone is in dutch and I can not load english rom with out usb connection, what should I do?
I had the same problem,but I have fixed it.
I got a i780 with CoinJun's Rom which version was forgot.I often can not sync to my pc.I upgraded the new ROM which version is PDXIB1 downloaded from samsung.Now,it is ok.
i have a big problem. i have a samsung i780 with orange rom (pbvic2), he wont connect to activesync, when i put the cable usb in, he charge, red led is on, the pc make sound connection, on the phone appears "connecting to host" but nothing. And another problem is that he see the sd card, but the computer wont, i try another card, the card reader is seeing , after i put him in the phone he become invisible on the pc, he corrupte them, pls tell what to do, or maybe i need to change the rom? but how ? becausae i have no pc connection...
sorry for my english

Synchronize Artemis with WMDC

Hello
If you have problem to connect MDA Compact III, P3300, Artemis to Vista WMDC.
Just click on you PPC
Start > Settings > Connections > USB to PC
and Uncheck "Enable advanced network functionality"
That's all, no need to reinstall drivers, no SP1, no soft and hard reset.
PLEASE MAKE THIS STICKY, MANY PEOPLES HAVE PROBLEM WITH THIS
Thank you
thanx so much for the info...i fried my brain trying to connect it but i never thought to uncheck that damn thing....
i can not
I´ve already done this but i am not able to connect my p3300 to the wmdc.
I also do not find the drivers
could you help me?
I am not able to find that "USB to PC" icon in settings->connections menu. Or anywhere else. Maybe because I have a cooked ROM (Tom_B&B_v5.0_with_cube).
BTW I'm running Windows 7 and can't connect the device to pc. I tried WMDC but it keeps saying that my device is not connected.. So i thought that the reason might be this "advanced connectivity".
Thx in advance for some response
Well I've already found it - I'm a dumbass It wasn't in connections but in system..
Now it's time to test it.
Well even if I turned it off there is still no luck connecting it. Even in device manager there is no mobile devices tree. I have a cooked ROM so maybe this causes the problem?

Computer cant recognize my Diamon

Dear Sirs;
Maybe this part of forum not be the proper place for my question but I don't know the poeple more expert than XDA masters.
Since last monday, computer cant recognize my Diamond when I connect it by USB cable and "USB device not recognized" appears. I will be really appreciated if you kindly help me.
Best Regards
Dariush Chegini
Try reinstalling Active Sync/Windows Mobile Device Center.
First remove Active Sync/ WMDC, restart PC and than install Active Sync/ WMDC.
Thanks for your kind attention. I reinstalled Activesync...no change, computer can't recognize the Diamond. My Diamond charges with both charger and computer, USB headphone works but PC can't recognize it....
I'm so confused and will be really appreciated if XDA masters help me.
Best Regards
XP or Vista or Windows 7 or which OS?
I've tried by both WIN XP and Vista.
could be a few possibilities for XP atleast...
activesync - file->connection settings->allow usb connections checked
faulty cable, try another one
faulty port on computer, try another one
driver issue - a difficult one...
i had this on my xp, found out there's something wrong with the cable - phone charging fine via computer USB, but XP says it doesn't recognize the device so doesn't connect to activesync....
good luck
Try on your Diamond -
Start>Settings>USB to PC
Unchek "Enable faster data synchronization"
If none of the above solutions work, maybe a hard reset...
I tried another cables, all options in "USB to PC", Activesync options, hardreset, even install other ROM but PC still can't recognize the Diamond.
It seems to be a Hardware problem but Diamond can be charged by USB and USB headphone works properly... I'm so confused .
Thanks Millions
Dariush
dchegini said:
I tried another cables, all options in "USB to PC", Activesync options, hardreset, even install other ROM but PC still can't recognize the Diamond.
It seems to be a Hardware problem but Diamond can be charged by USB and USB headphone works properly... I'm so confused .
Thanks Millions
Dariush
Click to expand...
Click to collapse
Try this in order...
1. Connect diamond to pc - it should at least charge as your say, but not detect Activsync
2. Goto Settings > Connections > USB to PC
3. Check Allow USB Connections > Uncheck allow fast data sync...
Does it connect?
if not and if you are using Vista
1. goto Windows Mobile device Center
2. check the attached image to see you have the same settings...
Does it connect?
if still not, then it could be driver issues, which I can suggest, once you reply to the above...
Thanx for your attentions. I've tried uncheking the said bottom but no change.
I used to connect the Diamond to the same notebook without any problem for more than 16 months, but the damn notebook stop recognizing my Diamond these days .
Thanks Millions
Dariush
may be usb port on your computer is malfunction. Did u try different usb port?
You need to open device manager in control panel to see how you diamond is listed.
Ever since i started with a new company 3 years ago they have some software that prevents activesync from connecting to any device I have from their computers using USB.
I went Bluetooth method and all is fine. I just use the USB for large, direct file transfer to internal storage.
If you get issues with activesync and usb and can take ages to resolve (if possible).
I guy's.
After a lot of search in this forum and a lot of other forum's, i came to this threat.
I had the same problem, my diamond didn't connect to my pc.
I had tried all the different suggestion, and nothing seemed to work. until i read the post of cloudedhopes, that suggested to change the usb cable. Because it was the only thing that i hadn't tried, i did change the cable, and it worked!
So i'm posting only to thank you guy's for all of the help, given not directly to me, but to all user!

Categories

Resources