SPL update from internal storage - Touch Diamond, MDA Compact IV ROM Development

Hello all and sorry for my English,
I have problems with my HTC Diamond, my computer does not recognize the phone when I connect. USB unrecognized.
I managed to update the rom and radio via the internal drive but not possible for the SPL.
Someone would have an idea.
Edit : Link for update from internal drive : http://htc-touch-diamond.forumactif.../flasher-depuis-le-stockage-interne-t4653.htm
Thank you in advance
Zeux

I have this issue with different USB-cables. Try another cable.

I have tried on several different PC and cable, but the problem is always the same.

ZeuX said:
Hello all and sorry for my English,
I have problems with my HTC Diamond, my computer does not recognize the phone when I connect. USB unrecognized.
I managed to update the rom and radio via the internal drive but not possible for the SPL.
Someone would have an idea.
Edit : Link for update from internal drive : http://htc-touch-diamond.forumactif.../flasher-depuis-le-stockage-interne-t4653.htm
Thank you in advance
Zeux
Click to expand...
Click to collapse
what windows are u usingm if ur using the original usb cable it should work , Try a different usb port on ur computer, not sure what else to suggest

ZeuX said:
I have tried on several different PC and cable, but the problem is always the same.
Click to expand...
Click to collapse
Did you try this:
Start --> settings --> connections --> USB to PC --> DESELECT "Enable Advanced network functionality"

NitroOnTheRocks said:
Did you try this:
Start --> settings --> connections --> USB to PC --> DESELECT "Enable Advanced network functionality"
Click to expand...
Click to collapse
Yes i try and is always the same problem, I also tried with disk drive

What is the current SPL?
You know that Olipro's hardSPL is write protected?
The only way to flash a write-protected it is to use the Soft SPL which is used to flash the hard spl, but change the hard-SPL file with your own SPL file.

Curently my SPL is SPL-1.40.olinex.
Sorry i m french and i dont understand.
It's possible to flash my SPL from internal storage ?

The same to my Phone!!!
Curently my SPL is SPL-1.39.olinex.
My phone cannot link to PC by cable.
I want to know to flash the phone by Mobile itself Memory(Flash Rom)

Hi guys,
same for me here, definitly a USB-hardware failure of the Xda, tried anything possible to connect, hardresets/ROM change, any suggested WinMo options, different cables, different PCs, reinstalling activesync, removing USB-Devices from PCs device manager. Win XP shows "unknown device", no chance to hook it up via cable. Bluetooth sync is possible, though. I'm on Olinex 1.40, so i join the request... anybody has a clue on how to revert it back to the original SPL without activesync?
thx in advance!

Also the same problem for me ! (I'm Dutch)
I've got a branded Vodafone one and had flash my Diamond with SPL-1.93.OliNex and with the dutch HTC ROM (the last one original ROM from the HTC website)
Also no conaction with the USB cable !!!!!!
Is my Phone USB broken ??????????????
Or can i flash mij phone with the internal storage card ?????
Can someone explane how the do that.
THX
Lokje

Is there any way to flash SSPL without using the sspl-manual.exe? The automatic mode would not go into the bootloader.
The issue is that the touchscreen stopped working and now the OS is stuck at "tap screen here" after the hard reset.

Related

Cannot upgrade ROM: Could Activesync 4.5 Beta 2 be responsible?

I am trying to upgrade from Ivan's ROM beta 13 to beta 15... Using the MAupgrade utility... however, everytime the utility resets the device to start the ROM update i get "USB device not recognised" from my PC and the update fails to start... eventually i get a connection error message.
This used to work just fine... however, recently i installed Activesync 4.5 Beta 2. Could this be causing the problem...? otherwise i'm not sure what else might be causing this...
I have also tried running the tool in bootloader mode with and without "USB connections allowed" ticked in Activesync but with no success...
Can anyone help me please?
Trying to clear registry before upgrading ?
Have you tried to clear registry before upgrading?
Hi Kassel, thanks for your response.
I have done a hard reset prior to upgrading... wouldn't that clear the registry?
If not please let me know what else i can do that might help.
Also, it seems very strange that i can't seem to do the ROM upgrade from bootloader mode.
I think i might be having a problem with GetDeviceData as it seems to stay in the "checking the information on your device... please wait" for forever when i try to upgrade from bootloader mode.
If it does come up, then the panel which says which version is on my device and which version it will be replaced by is blank?
This is not the case if i try to do it through activesync (with the device set up as guest).
What might get in the way of reading the device data? I made sure it went from serial to USB when i plugged the USB cable into the device and i have tried different cables...
My bootloader appears to be V1.00
hmmm... any thoughts?
Same here...
I also have the same problem.
I installed ActiveSync 4.2
Alse after having installed AS, the MTTY program doesn't see the USB port anymore, just some COM ports.
Same to me too
I have ActiveSync 4.5 bata at work (Which couln't upgrade ROM)
while my notebook with ActiveSync 4.2 work fine
Wow, it's great to hear that people are having the same problem...
Is it possible to back track with Activesync? Is 4.1 still available?
If not, i think i still have an older version running at home (i hope!)...
Is this definitely the issue then?
l_pete_l said:
I have ActiveSync 4.5 bata at work (Which couln't upgrade ROM)
while my notebook with ActiveSync 4.2 work fine
Click to expand...
Click to collapse
I have ActiveSync 4.5 and upgrading my Jasjar was successfully done with the ROM Version: (1.90.96 / 1.13.00 / 42.47.P8)
Sorry for not knowing, but is that one of the AKU3.2 ROMs. Not sure if it should make a difference, but just curious.
Also, did you need to use the MAupgrade Utility?
Cheers,
What happens with the USB drivers after installing ActiveSync 4.2
The strange thing is, that I tried connecting my MDA Pro to a PC without ActiveSync on board.
USB ports were visible using MTTY
I installed ActiveSync 4.2 and only COM ports are visible in MTTY, the USB port has vanished.
Can this be caused by the USB driver that comes with the ActiveSync install ?
If I put my device in bootloader mode, it sais USB on the PDA screen, but the utility for the ROM upgrade doesn't see the PDA and comes up with a device not connected error.
I would really like to try out one of the new ROM's by Ivan or JwRight, but am unable to, because of these USB problems.
So please someone help !!!!!!!!
I have the same problem... if i put the device into bootloader mode, "serial" changes to "USB" but the PC comes up with "device not recognized"...

Stucked to "Serial" bootloader mode

Hi all,
I was trying to upgrade my Qtek9000 with an official ROM Updater, but my device went immediately into the Serial bootloader mode and I've not been able to do nothing to run out from this mode...
I've tryied the solutions suggested in http://forum.xda-developers.com/showthread.php?t=290234 without any luck...
The problem is that neither Mtty nor the UNI_exitbootloader tool are able to connect to USB.
I'm using no usb hub, I'm running on a Dell Precision M90 notebook, I've disabled USB connection in Activesync (4.2.0) and also tryied with a pc without activesync installed.
Any idea?
Thanks
Paolo
Are you on XP or Vista, and what version of AS/WMDC do you have?
Hi,
I'm running Xp, ActveSync is 4.2.0, don't know what WMDC is sorry, can you please explain?
Don't worry about WMDC - it's only relevant if you have Vista.
Are you using the proper cable that came with the Universal? Some cables don't have all the pins wired. That (or a broken USB port) would explain why your Universal isn't going to USB mode when you plug in the USB cable. Have you looked carefully to see if it changes from saying "Serial" to "USB" at the top of the Bootloader screen when you plug in the cable?
If it does change to "USB", I would try upgrading to ActiveSync 4.5 - go to http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx
Make sure you disable USB Connnections in the Connection settings before plugging in your Universal. Then try flashing the CE ROM again.
Good luck
BTW did you try doing a hard reset to get out of bootloader (both soft keys and then the reset button, then select 0).
Good advice, especially with upgrading to AS 4.5, it's a full release now on Microsoft Update site, and I have a feeling the WM6 ROMs may require it... Good luck with it, keep us posted.
Ok, thanks all!
This morning I connected the PDA to my office's PC with it's original cable and it instantly switched to USB mode...
So, I launched the upgrade and it's now in progress... let's hope!!!
It might really be a cable problem, yesterday night I tried with 2 different PC and a not original cable (I think it's my camera one...)
Thanks a lot, by now... I'll let you know own this story will end...
Ok, new ROM is up and running!
Thanks all!
Bye
Paolo
Good stuff.

Samsung SGH-i780

Hello
I am new to this site and was hoping someone could give me a some assistance. I recently used Mirage 1.8 to update my i780 to WM6.1. the eboot and the PDA installed just fine but I can not for the life of me get the phone and phone boot loader update to install. I am using the i780 Phone Upgrade ROM DXHH1 file, found it on this site. After I click detect and then power up the phone I hear the connection sound on the computer that the device is recognized and then the Mirage software starts its thin. Then I hear the disconnect sound and then Mirage goes through the Kw.kim retry steps. And the phone shuts down.
I have tried the modem drivers but I seem to be having a problem with them. I downloaded and installed this file "Samsung_CDMA_modem_4.34". When I connect the Phone it shows that it found the i780 USB device but then it begins to install Samsung Mit's USB Device and then it fails to install the device properly...so it does not complete the installation properly. How do I go about installing the driver properly? I do not see it on the list of devices in system manager, where can I manually update the driver and were do I find the file once the software is installed. Or do I need to try something else?
So I just tried a WM6 Eng rom and it all installs fine but just like the WM6.1 I can not get the phone to turn on in the wireless manager. What do I need to do to get the phone to turn on?
Thank you.
DXHH1 is meant for Asian version of i780, what's yours? for which country?
And can you please tell us if you are using XP SP2 or 3 and not Vista because flashing in Vista with Mirage Updater will NEVER work even if you have the right driver.
Try this. Uninstall the Samsung drivers frist and then reinstall it after reboot.
Then instead of using a separate DXHH1 Phone only image, download a full Russian PUHE1 IMG file (you can search for this easily in this forum) and flash everything (eBoot+Phone+PDA). If you can flash the Russian IMG successfully, you will be able to boot up your i780 in Russian langauage and only after that you can try DXHH1 IMG (I mean the full IMG rom and not individual files)
Good luck
EFN said:
DXHH1 is meant for Asian version of i780, what's yours? for which country?
And can you please tell us if you are using XP SP2 or 3 and not Vista because flashing in Vista with Mirage Updater will NEVER work even if you have the right driver.
Try this. Uninstall the Samsung drivers frist and then reinstall it after reboot.
Then instead of using a separate DXHH1 Phone only image, download a full Russian PUHE1 IMG file (you can search for this easily in this forum) and flash everything (eBoot+Phone+PDA). If you can flash the Russian IMG successfully, you will be able to boot up your i780 in Russian langauage and only after that you can try DXHH1 IMG (I mean the full IMG rom and not individual files)
Good luck
Click to expand...
Click to collapse
You can flash using VMWARE (trial available) and install WinXP inside the virtual machine.. that's how I flashed your V4
disable USB connection in activesync...
People, here is a link to the Samsung modem driver:
http://fus.samsungmobile.com/i600/Samsung_CDMA_modem_4.34.zip
Thanks for the replys.
My i780 is from France and it had the French ROM but not any longer because I forgot to back it up.
I have XP SP3 on my computer.
I have uninstalled the drivers as well as activesync. Restarted computer. Then installed the drivers suggested by Mochan above. Then installed activesync.
Connected the i780...all of the drivers were installed properly (Samsung MITs device found and installed and i780)
Opened activesync on computer and unchecked "allow usb connections".
Reconnected the device and powered it up and the computer found new device and installed "Samsung Mits".
I downloaded both the Russian and the Italian full Rom updates.
Opened Mirage v1.8 and selected first the russian Rom for edoot+pda+Phone selected detect.
Plugged in phone to usb and all of the steps worked up till the phone image. It says on the phone "phone image downloading" and on the computer it shows "switching usb to phone" and "Downloading phone".
Then for some reason the phone shuts down automatically and stays powered off.
Then Mirage brings up the message "Attempting to open com 0..." KW.KIM Create Retry (25) etc...Finally Download failed.
I have tried this with the Russian, Italian and English ROMs available. I have tried it with the following settings on the phone on and off:
- Emercency mode
- Regular restart of phone
- Reset phone by holding Red Green and Power button together.
- Removed the battery completely and restarted.
- Restarted with Sim installed and with sim removed.
- Settings/Connections/USB connection mode switched from Activesync to Mass storage and then switched back to Activesync.
- Settings/System/USB to PC "Enable advanced network functionality" selected and then deselected.
What am I missing?
Why does the phone shut down during the Phone.bin file download and not complete the downlad and install? Is there some setting that I am missing or a com port that I need to establish so they will communicate properly.
Everything seems to work on the phone even without the phone.bin file installed. The problem is that when I try to connect to wireless manager and enable the phone nothing happens and it does not register the sim card. Also In the Settings/Connection/USB connection mode I only have listed Activesync and Mass Storage. There is no listing for modem (I noticed in one of the other posts that they had the option to select modem). Is there something I need to do to enable this option.
Sorry for the long rant but wanted to make sure everyone had all of the info.
Thanks
my brother had a similar problem with his i780 - the phone refused to be recognised when flashing the phone.bin, the pda and eboot flashed perfectly no problem. We realised it was a problem specifically with the device as my i780 flashed all three parts fine.
In the end he got the device replaced which flashed fine!! Maybe there are a few dodgy phones out there! My advice would be to try and find a French rom and flash your device with that. Hopefully the rom will be compatible with the phone part of your phone!
Just downloaded the French rom from an xda thread. It would not load up under the eboot+PDA+Phone option but it did load under the PDA option in Mirage. Still can not turn on the phone under wireless options on the i780.
The phone/radio worked fine with the original rom. Once I did the first rom update to switch from french to english only using the pda update I lost the phone/radio functionality. So I dont think it is a hardware issue rather a software issue. For some reason it is not making the connection. I just dont know what it is. Could it be something with mirage? Why would the phone shutdown during the software install?
so looks to me that the problem is with the phones modem set up. I do not have it listed as an option for usb connectivity. Is there a reg edit or some other steps I should take in order to get the phone to set up the usb modem?
Thank you.
I still have had no success with my problem, has anyone come across any info about an official i780 update? Or does anyone know what I can do to get around my proble to install the phone rom? Thank you.
I have the same problem with apetrovic. I have used with phone off, which is a big pain. Just like a PDA with no phone. This is all happened after flash Russian image. The original rom was German. my i780 simply turns off after downloading and ends up with no port created.
Any clue, please.
I have downloaded your suggested driver, run the setup, restarted the computer and connected the i780 in Emergency mode with activesync disabled and the Computer keeps installing Samsung MITs Drivers and not the CDMA Drivers you supplied. I used the Add Hardware wizaer, interrupted the install process when the i780 is first connected and even tried the update driver option and I can not install the CDMA driver I always get the error that "The specified location does not contain information about your hardware." How do I get the CDMA drivers you provided installed and not the MITs?
Thank you
apetrovic said:
I have downloaded your suggested driver, run the setup, restarted the computer and connected the i780 in Emergency mode with activesync disabled and the Computer keeps installing Samsung MITs Drivers and not the CDMA Drivers you supplied. I used the Add Hardware wizaer, interrupted the install process when the i780 is first connected and even tried the update driver option and I can not install the CDMA driver I always get the error that "The specified location does not contain information about your hardware." How do I get the CDMA drivers you provided installed and not the MITs?
Thank you
Click to expand...
Click to collapse
Yes, I have also tried to intervene the installation of the MITs driver to install the CDMA driver, and Windows XP sp3 says "The specified location does not contain information about your hardware." So, I could not install the CDMA driver.
I do not know how to get rid of the MITs driver completely, so that Windows XP does not even recommend this driver when I install the CDMA driver. Windows always complain the MITs driver is not signed.
I wonder if those who have successfully installed the CDMA driver also see the MITs driver in the device manager when i780 is connected to PC under the emergency mode. This looks important for the moment for you and I in resolving the issue.
Anyone who can tell us what driver is on when i780 is connected to PC under the emergency mode? Thanks in advance.
I think the problem for us is that we have lost the modem option on the i780 under settings-usb connection mode. Since we do not have the option the computer will not download the drivers. The drivers that are downloaded are prob ok because they are intended for USB sync but when you go to the device manager there is no i780 modem installed under modems...so my theory is that the computer is not installing the modem driver because it is not finding a modem on the phone. So we need to somehow get the modem option installed and available on the phone and then the computer will install the drivers and then we can properly install the wm 6.1 phone update. please let me know if you find anything out.
apetrovic said:
I think the problem for us is that we have lost the modem option on the i780 under settings-usb connection mode. Since we do not have the option the computer will not download the drivers. The drivers that are downloaded are prob ok because they are intended for USB sync but when you go to the device manager there is no i780 modem installed under modems...so my theory is that the computer is not installing the modem driver because it is not finding a modem on the phone. So we need to somehow get the modem option installed and available on the phone and then the computer will install the drivers and then we can properly install the wm 6.1 phone update. please let me know if you find anything out.
Click to expand...
Click to collapse
That's an interesting theory noticing the messages in the mirage loader.
"Switching USB to PHONE..." and then
"PHONE-Switching USB to PHONE...
PHONE-Automatic driver detection failed..
PHONE-Attempting to open COM 0...
PHONE-Port Create failed...: COM 0"
These clearly look related to the modem meaning we should be able to see the device under modem in the device manager of Windows XP.
In fact, my i780 got the phone rom flashed just for once successfully when I flashed the russian image (eboot, pda, and phone, altogether). I don't know what mysterious thing happened here, and then I have never succeeded back again in flashing the phone rom since then. My phone used to work no problem before this. I just wanted to have windows mobile 6.1, and now I know I should have clicked "PDA" in the mirage loader instead of "EBOOT+PDA+PHONE".
Well this is becoming more and more difficult!! I contacted US Samsung support to reflash my i780 and they can not do it becuse the phone is not sold in the US and then I contacted Samsung France and they cant flash it because they can not ship it back to the US. I need to have an address in France for them to ship it to. So now stuck with a phone that only has PDA functions.
If there is someone out there who can help me I would appreciate it. The problem is that I used the Roms available on this site to upgrade to WM6.1 and I lost my phone/radio function. Now my phone is stuck in flight mode. I was able to install the eboot and the pda bu the phone portion will not install. I followed the directions and installed just the PDA portion initially and it killed my modem/phone/radio function. Before the phone worked and modem was listed as an option under settings usb connection mode...now it is not.
I have tried to install a French ROM (because it was purchased in france)and that did nothing.
So if there is anyone out there that can help guide me in installing a functioning rom WM6 or 6.1 I would greatly appreciate it.
apetrovic said:
Well this is becoming more and more difficult!! I contacted US Samsung support to reflash my i780 and they can not do it becuse the phone is not sold in the US and then I contacted Samsung France and they cant flash it because they can not ship it back to the US. I need to have an address in France for them to ship it to. So now stuck with a phone that only has PDA functions.
If there is someone out there who can help me I would appreciate it. The problem is that I used the Roms available on this site to upgrade to WM6.1 and I lost my phone/radio function. Now my phone is stuck in flight mode. I was able to install the eboot and the pda bu the phone portion will not install. I followed the directions and installed just the PDA portion initially and it killed my modem/phone/radio function. Before the phone worked and modem was listed as an option under settings usb connection mode...now it is not.
I have tried to install a French ROM (because it was purchased in france)and that did nothing.
So if there is anyone out there that can help guide me in installing a functioning rom WM6 or 6.1 I would greatly appreciate it.
Click to expand...
Click to collapse
I didn't know that you are in the states causing the problems. Too bad. I have two questions for you to clarify the problem.
Before the phone worked and modem was listed as an option under settings usb connection mode
Does this mean you could see the third option called "phone" in USB connection mode in i780? Currently there are only two modes, which is ActiveSync and Mass storage.
I was able to install the eboot and the pda bu the phone portion will not install. I followed the directions and installed just the PDA portion initially and it killed my modem/phone/radio function
Does this mean that upgrading only PDA may brick our i780 not necessarily with eboot and phone? Because I keep thinking that, it may be eboot I updated from this site not turning on the modem in i780.
Sorry about your and my problem. Thank you for your feedback.
Does this mean you could see the third option called "phone" in USB connection mode in i780?
Yes there was a 3rd option but it was "Modem".
Does this mean that upgrading only PDA may brick our i780 not necessarily with eboot and phone?
When I first used the upgrade I used the i780 PDA portion only, as suggested.
apetrovic said:
Does this mean you could see the third option called "phone" in USB connection mode in i780?
Yes there was a 3rd option but it was "Modem".
Does this mean that upgrading only PDA may brick our i780 not necessarily with eboot and phone?
When I first used the upgrade I used the i780 PDA portion only, as suggested.
Click to expand...
Click to collapse
Sorry but I think that there is a bit of confusion.
During the normal use of the phone, you never see a modem in the device manager.
You can see the phone as lan card (used by activesyc), as a different lan card (when internet connection sharing is enabled), or as storage device (if you enable the related function in the control panel).
No modem.
During the flash process of the pda section the phone is still seen as a lan card.
ONLY when the phone sectin is flashed the phone switch to phone/modem mode.
Going to the problem you must launch the phone flash process and ceck what happen in the meantime in the device manager.
Is a question mark present ?
There is a unknown usb device ?
And if is the case what is the pid and the vid of the device ?
The Solutor said:
Sorry but I think that there is a bit of confusion.
During the normal use of the phone, you never see a modem in the device manager.
You can see the phone as lan card (used by activesyc), as a different lan card (when internet connection sharing is enabled), or as storage device (if you enable the related function in the control panel).
No modem.
During the flash process of the pda section the phone is still seen as a lan card.
ONLY when the phone sectin is flashed the phone switch to phone/modem mode.
Going to the problem you must launch the phone flash process and ceck what happen in the meantime in the device manager.
Is a question mark present ?
There is a unknown usb device ?
And if is the case what is the pid and the vid of the device ?
Click to expand...
Click to collapse
I stumbled upon a website that had an image that showed a modem in both the device manager and the usb connection mode areas...I have looked for it to post the image but I dont know where to find it again...starting to get lost from all of the info I have come across trying to fix my phone...getting confusing now.
Anyway, here is what happens in device manager when I do the following:
-Activesync disabled - i780 in emergency mode - Samsung MIT's USB Device listed under Windows CE USB Devices
-Activesync disabled - i780 normal - 1st before WM6.1 is running it shows Samsung MIT's USB Device listed under Windows CE USB Devices. Then that goes away and windows mobile based device shows up under network adapters.
- Activesync enabled - i780 emergency - Found new hardware installs without error...look in device manager and there is a yellow exclamation point next to Samsung MIT's USB Device under Windows CE USB Devices.
- Activesync Enabled - i780 normal - 1st before WM6.1 is running it shows Samsung MIT's USB Device listed under Windows CE USB Devices. Then that goes away and windows mobile based device shows up under network adapters.
Now during all of the above steps there is never an unknown USB device listed. Also I tried using mirage with these same above settings and each time I get the notification that usb device not recognized and then the phone suts down and I get the KVM com port messages, and it fails to install the phone rom.
I would like to provide you with the pid and vid but I don't know what pid and vid stand for. please let me know and I will get it for you.
Thanks for the help.

Xda Exec - Stuck in Bootloader and no USB

Hi all,
Yes I know there are countless threads about being stuck in the Bootloader of the universal and using USB (for programs such as the Mtty utility) to overcome it but I don't think this is going to work in this case.
Basically:
- XDA was upgrading to a more recent bootloader
- XDA dropped activesync connection right at the start
- Result: device constantly stuck on non-backlit screen with "Serial" at the top and "V2.01" at the bottom.
Now here is the main problem; every time the device is connected via USB to Windows XP it is simply not reconised (and yes Activesync and such is disabled) which renders all programs such as Mtty non-usable. I've tried two different PC's with the same problem.
So the question is does anyone think this device is recoverable? Is it possible to flash a complete bootloader via the SD card maybe?
Thanks,
Temjin
Temjin said:
Hi all,
Yes I know there are countless threads about being stuck in the Bootloader of the universal and using USB (for programs such as the Mtty utility) to overcome it but I don't think this is going to work in this case.
Temjin
Click to expand...
Click to collapse
Have you try this ?
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
cheers
indra9110
Yep, There isn't a SD or a SIM card inserted and the problem still occurs.
I had this very same problem. I installed Tomal's ROM and it worked fine afterward. Use this link: http://forum.xda-developers.com/showthread.php?t=408881

Dead in bootloader !

Hi, my univversal is dead in bootloader at serial mode and when I connect it to my PC with usb cable it recognize it as an Unknown devices and my phone still stand in serial mode!
I was trried all the method I found like:
I went to device manager of my PC an re-install my usb--didnt work
shut down usb and active synch (with task manager) and ry mtty program-- dident work
I change my usb cable and change te mini usb gate of my phone!-- didnt work
Plz help me!!!!!!!!
god_love_power said:
Hi, my univversal is dead in bootloader at serial mode and when I connect it to my PC with usb cable it recognize it as an Unknown devices and my phone still stand in serial mode!
I was trried all the method I found like:
I went to device manager of my PC an re-install my usb--didnt work
shut down usb and active synch (with task manager) and ry mtty program-- dident work
I change my usb cable and change te mini usb gate of my phone!-- didnt work
Plz help me!!!!!!!!
Click to expand...
Click to collapse
Hi welcome to the forum.... try following
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
(try method 2)
and try to change the computer usb ports...try different usb ports of the computer and try flashing to tomals 8.5 or 8.7 ...
Cheers
Rajiv
Thank you rajivshahi for your answer and attention.
I had try all the methods that I find in hole of internet!!
also I tried your suggstted method. I was connect my phone with ans without SIM and memory to each USB port of my (and another) PCs, I changed my USB cable for several times, I also tried Uni_bootloader program and MTTY but they didn't work (because there is no USB connetion with my UNI and my PC)
I just keep crying!!!!!!
Have you tested doing Doc format?
Hope it helps,
If the device is not recognised by PC at the same time as Serial not changing to USB, I would think your USB port is no longer attached as it should and can cause the problem you described. From time to time USB port might still feel and look secure on mainboard, it will even charge the device, however, when it comes to AS and USB connection to PC, it will not connect properly.
That, or your PC USB or motherboard are malfunctioning. Try other USB devices in the same ports.
My PC's USB ports are work properly because as you told enigma1nz, I had test them with another devices
For the DOC format method: there is no USB port for connecting with MTTY!
Soooooo amazing!
(thanks for all your answers)
So, it means there is no way for me
hey,
have you disabled (unckeck) USB connection for ActiveSync/WMDC at PC?
do it now or USB port will not be available for mtty.
also please make sure that you installed XP sync driver under vista incase you're trying from vista.
follow the same -
1. unckeck USB connection for as/wmdc at pc
2. reset the device by pressing reset button
3. set bl mode (if not there already)
4. connect usb cable
5. start mtty ...
Hi Tomal, first I have to say: Thank you for your amazing roms. they are so fast, nice and stable. I'm one of the biiiig fan of your roms.
seconed: yes I was disabled the USB connection and also kill ir from task manager. but my Uni is still deeaaaaaaad
somehow I have a feeling that something is wrong with the usb port in device. may be connection is broken or something...
Hi everyone,
finally I had to send my Universal to doctor! , he says that I can load your device from SD card, and boot up it, (flashing card)
!!
I was wondered! what is flashing card! (load from SD card without any PC!)
Do any one have some information about this method!!!!
enigma1nz said:
If the device is not recognised by PC at the same time as Serial not changing to USB, I would think your USB port is no longer attached as it should and can cause the problem you described.
Click to expand...
Click to collapse
tomal said:
somehow I have a feeling that something is wrong with the usb port in device. may be connection is broken or something...
Click to expand...
Click to collapse
Yep, it does look like your device's USB being a culprit.
god_love_power said:
Hi everyone,
finally I had to send my Universal to doctor! , he says that I can load your device from SD card, and boot up it, (flashing card)
!!
I was wondered! what is flashing card! (load from SD card without any PC!)
Do any one have some information about this method!!!!
Click to expand...
Click to collapse
I believe this is the thread you are looking for
http://forum.xda-developers.com/showthread.php?t=393370
Thanks a lot enigma1nz, i think that i need but can you (or any one) explane it, step by setp for me PLEASEE !:
1. Download the tool and unrar somewhere in your pc.
2. Decode the rom image (nk.nbf) using HTC64 tool and put it (nk.nba) under the "SD_Flash" directory.
3. Run the "SDFlash_G3.cmd" and follow instruction on the screen.
SD_Flash?????
Decode the rom image (nk.nbf)???????!!
this method is for 3G, my device is 4G
This is the solution
god_love_power said:
this method is for 3G, my device is 4G
Click to expand...
Click to collapse
my dear frnd few days back i was also suffered from that problem...
And problem was with mini usb in universal.
it was disconnected with there tracks from inside.
So just open ur g4 device and resold mini usb.
trust me this is the problem.
Thanks yuvraj, how can I do it? Is there any manual for it?
can you help
You can find the manual in the Wiki, just do a search
I could'nt creat golden disk (flash from sd) cos that is for G3 devices, I just think that can we install another OS like linux on SD that is boot himself up?!
or i just have to change my universal mainboard!!!!?
Finally I beleve that my Uni is dead and I have to say goodbye to it
I'm going to buy HTC Advantage X7510, but there is one question:
Can I upgrade its WM 6.1 to 6.5 ?

Categories

Resources