After installing PhoneAlarm 2.13 I cannot send files via my windows XP computer to my HTC HD.
I can send files from the HD to the PC but not the other way round. In fact I can activesync using bluetooth and then use the activesync window on my PC to cut and paste files from the PC to the HTC but not by right clicking the file and then using the "send to" command.
I am positive that the problem is due to PhoneAlarm because when I uninstall it and hard reset my device everything seem starts working normally but again fails after PhoneAlarm installation.
Anyone else experiencing this problem and please help.
Regards
I had the same problem, could send files from my HD, but not to my HD.
Never installed PhoneAlarm though.
What I did to fix it:
- In Advanced Config, go to "Bluetooth". "Obex" was disabled. I enabled it, saved settings and did a soft-reset.
- In HD Tweak, also go to "Bluetooth". "Files reception" was disabled. I enabled it, saved settings and did a soft-reset.
Hope it solves your problems!
If I remember correctly you need to activate IRDA in the phonealarm settings to allow the bluetooth to work (I think it even mentions bluetooth next to the IRDA check box - odd but it then worked on mine)
Activate IR
sillysquid said:
If I remember correctly you need to activate IRDA in the phonealarm settings to allow the bluetooth to work (I think it even mentions bluetooth next to the IRDA check box - odd but it then worked on mine)
Click to expand...
Click to collapse
This is correct. You need to activate IR in the profiles in PhoneAlarm you use to receive files over bluetooth.
No need for hard reset
I have had the same problem even after uninstalling phonealarm. No file receiving over bluetooth. Then I have re-installed phonealarm again, enable infrared and uninstall it. Everything works fine now. I think some changes in registry would have solve it too, but this is easier I mean.
Registry Settings
woxydator said:
I have had the same problem even after uninstalling phonealarm. No file receiving over bluetooth. Then I have re-installed phonealarm again, enable infrared and uninstall it. Everything works fine now. I think some changes in registry would have solve it too, but this is easier I mean.
Click to expand...
Click to collapse
To enable file transfer in registry:
HKLM\\Software\Microsoft\OBEX and change the IsEnabled value from 0 to 1
The OBEX_inbox.cab can also be useful if your rom lacks it.
Related
Indeed clicking as much as one time on "Bluetooth Explorer" will cause TomTom not to function properly any more (maps/voices not found etc.).
I have learnt that the hard way!!!
Many members of this forum speculated that the Artemis SD card housing is somehow related to TT's maps to vanish.... NOT TRUE!!!
After a hard reset I have tested that TT was fully functional and I have (intentionally... just to find out) clicked on Bluetooth Explorer and BINGO the TT6.1 maps&voices are GONE!!!
If some of the forum experts would happen to read this and would feel like giving instructions to disable Bluetooth Explorer it would be very helpful.... this will surely avoid SEVERAL hard resets to many people.
I have read that one should go to Settings/Connections then select the FTP tab and uncheck "Enable Bluetooth Explorer" but this is not to be found on my ARTEMIS (P3300)... Let's see if somebody will find a moment to share his/her wisdom with the rookies and shed some lights on this annoying problem.
Cheers!
SiperX
On my Orbit you do the following to disable the Bluetooth Explorer
Settings / Connections / Bluetooth / FTP (tab)
Then select or de-select Bluetooth Explorer.
I appreciate your kind reply Patrick but as you can read in my thread this path (Settings / Connections / Bluetooth / FTP (tab)) is not available in the Artemis/HTC P3300.... Anybody else?
Do you have a comms manager? If so you can access the ftp option of the bluetooth settings from here.
TomTom and Bluetooth explorer both work on my xda orbit.
herghost, what version of TomTom are you running?
I m unable to have Bluetooth Explorer enabled on my Orbit, and get TomTom to find the maps. I am running ver 6.02
perfect, i wasnt able to make tomtom recognize maps on orbit(on universal it works w/o probs) i switched bt expl. off and it works. thx
Guys, there is no doubt. TT (mine is version 6.1) and BT Explorer are NOT going to work together! I am glad to hear that phsnake could get his orbit to resume TT functions.... And (also) I found out that my old rom (the one originally shipped with the P3300) had the path (Settings / Connections / Bluetooth / FTP) to disable BT Explorer (as Patrick_UK explained) ... but the one I am using now does not offer the chance to enable/disable BTE.... any registry master would be kind enough to offer his/her expertise to make this possible? I am not so keen on editing the REG unless I know exactly what has to be done
rom 1.28.0.0 wwe
rom date 11-06-06
radio 02.69.90
protocol 4.1.13.30
ext. rom PDAMobiz.com
SiperX:I'll try today to find reg solution, i cannot promise anything, but i'll do reg export with btexpl. switched on, then with switched off and compare reg.files. hopefully i'll find the right one key.
Phsnake, this sounds like a great idea! Thanks in advance!!! I really hope that you can succeed and give me support in this matter.
By the way where did you find the rom (ROM: DOPOD IPL: 1.25.0001 SPL:1.27.0000 GSM: 2.69.90 OS:1.28.0.0 WWE) you are running now? It sounds lke the right one for my T-Mobile Artemis.
so i compared the regs and diff follows:
Code:
[HKEY_CURRENT_USER\Software\HTC\BluetoothFolder]
"EnableClient"=dword:00000001
"HDEVICE"=dword:00031380
[HKEY_LOCAL_MACHINE\Drivers\Active\68]
"ClientInfo"=dword:00000000
"Hnd"=dword:00031380
"Key"="Drivers\\BlockDevice\\BTDisk"
"Name"="BTD1:"
i guess all U need 2 do is change "EnableClient" from 1 to 0. try it and let us know. (i can disable it thru bt settings). or remove above posted reg entries.
ROM:its standard dopod shipped(the latest one) should be on wm-gurus.com
Thanks man! The registry editing you suggested worked and the BT Expl. is now OFF and TT finds the maps again!!!
But the option to enable/disable the BT Expl. (via BT settings as you say) is still not available any chance you could send me a screenshot of your reg for both [HKEY_CURRENT_USER\Software\HTC\BluetoothFolder] and [HKEY_LOCAL_MACHINE\Drivers\Active\68]?
For your Dopod rom, could you please give me a precise link where I can download it? I could not find it at wm-gurus.com.
Thanks a lot
ftp.wm-gurus.com/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe
yes i know that wont allow u to switch off btexpl. thru bt control panel.
Here are regentries U requested, but i dont think it'll help. but try.
Thanks again!
BTW, the same file (ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe) was available at XDA too.... I have tested it a few weeks ago it and -being an AU (Australian rom) my sim (Dutch T-Mobile) did not get registered as the operator is apparently not quoted .... strange that you can use it in Scotland.
For regs I will see what I manage to put together and will let you know... Great (and prompt) support was very appreciated...
Hi again,
I have flashed once more the ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe onto my Artemis and I have (FINALLY) noticed that the SIM does register and I am able to use the phone (incoming & outgoing calls).
The only problem is that every time I reboot I get a notification from the "NETWORK WIZARD" which says "your current operator (20416) is not supported. You should obtain an update from your device vendor".... Any idea how I can get this nag off my back?
Thanks
try to check \windows\startup
I have deleted (& made a copy for backup) these 5 files:
netwiz.cpl
netwiz.dat
netwiz.exe
netwiz.exe.0404.mui
netwiz.ini
from the Windows folder of my Artemis.
After rebooting the Network Wizard notification does NO LONGER pops up!!!! So I would say "Problem solved", right?
I am glad that -thanks to the recent communications we exchanged- you "inspired" me to give one more try to the Dopod rom and I finally seem to have found what I wanted.
Only one final point: In other roms if you click on the phone signal bar you get the option to turn on/off the flight mode and if you click on the icon on the right of the phone signal bar you culd turn on/off the WiFi... in this rom you get a small (blue) Comm Manager link to follow in order to enable/disable these functions.... did you find any faster ways to activate WiFi or Flight mode? May be they can be added to the voice commands?
Cheers
u can use phonealarm-some skins supports one click wifi, gprs,btooth switch,
I saw phonealarm but I have decided to spend the end of the weekend configuring my newly installed rom (immediately after I will make a Sprite backup) and along the way try to think of something to keep to a minimum the amount of additional SW installed. What do you think if I use "tray launch", would that allow me to make the necessary shortcuts?
By the way (with previous roms) I kept my Artemis overclocked at 240 Mhz and it was pretty stable, did you test any higher frequency on the Dopod rom?
Some of you may have noticed that with the newest release of LVSW ROM 3.30.2.1 (2007-05-19) that the old hacks for MS VC do not work getting voice command over bt headset.
LVSW's ROM comes with Cyberon VC but the nice thing is it can be removed via remove programs so remove it and then unpair your headset and turn on/off the phone to start fresh.
1.) Install MS VC 1.6
2.) Install attached .cab
3.) In programs launch BT Voice Command Config
4.) Check enable
5.) Click save
6.) Click Exit
7.) Turn off phone
8.) Turn on phone
9.) Pair bt headset
I take no credit for this program it was done by XCSdM and later modified by ZaJules..
This works perfect for me no other tricks or reg edits zilch, nada, nothing. You might want to set voice command to button 5 though.
I'm using Elfs variant of the newest LVSW and it doesn't come with Cyberon VC and it works perfect for me.
So has it worked for anyone?
I just tried it but it doesn't work for me.
Can you give me some more info like what ROM are you using etc? What headset?
It worked for me but only after doing some changes in the registry. The path in OEM/Voicecommand was directed towards "BTVCBasic" and i had to redirect it to BTVoiceCommand. Then, it worked.
GermanGuy said:
It worked for me but only after doing some changes in the registry. The path in OEM/Voicecommand was directed towards "BTVCBasic" and i had to redirect it to BTVoiceCommand. Then, it worked.
Click to expand...
Click to collapse
Thats what was suppose to be fixed..Hmm I don't have a cab editor program so I'll have to figure something out..
MrDSL said:
Thats what was suppose to be fixed..Hmm I don't have a cab editor program so I'll have to figure something out..
Click to expand...
Click to collapse
Thank you for your help and the cab, though. I am a happy camper now with MS VC initiation working through my Bluetooth headset
Works!
VC1.6 now works thru the BT (Jawbone). Only notifications still come through the TyTN's speaker.
THANKS!
I just installed wince on a friend computer since my trial is up and checked the .cab I posted and the registry inside does set it to BTVoiceCommand.exe
So the only thing I can think of is maybe someone used the old version. I dunno but it should be correct..
ryanblace said:
VC1.6 now works thru the BT (Jawbone). Only notifications still come through the TyTN's speaker.
THANKS!
Click to expand...
Click to collapse
The notifications have never worked and its a known problem with htc and ms so who knows if a fix will ever be released..
I changed the file name in case others were using a old one or something.
Trying to get it to work on a plantronics headset and it does not work.
Changed path to point to BTVoicecommand.exe so now it does launch the program, but on the handset, not on the headset...
ygeller said:
Trying to get it to work on a plantronics headset and it does not work.
Changed path to point to BTVoicecommand.exe so now it does launch the program, but on the handset, not on the headset...
Click to expand...
Click to collapse
Delete pairing, SR, re-pair and try again. Sometimes that fixes it.
Also note that this is only for LVSW ROM 3.30.2.1 (2007-05-19)..
GermanGuy said:
It worked for me but only after doing some changes in the registry. The path in OEM/Voicecommand was directed towards "BTVCBasic" and i had to redirect it to BTVoiceCommand. Then, it worked.
Click to expand...
Click to collapse
I am also a happy camper. I had to make the same registry changes.
I got MS Voice command to work but was realy buggy on my Wizard...I installed Voice Commander over it and works so much better.
MrDSL said:
....
1.) Install MS VC 1.6
2.) Install attached .cab
3.) In programs launch BT Voice Command Config
4.) Check enable
5.) Click save
6.) Click Exit
7.) Turn off phone
8.) Turn on phone
9.) Pair bt headset
...
Click to expand...
Click to collapse
For me works half & half...
Half to the bt and half to the speaker phone...
MrDSL said:
1.) Install MS VC 1.6
2.) Install attached .cab
3.) In programs launch BT Voice Command Config
4.) Check enable
5.) Click save
6.) Click Exit
7.) Turn off phone
8.) Turn on phone
9.) Pair bt headset
Click to expand...
Click to collapse
Yup worked for me. But then it worked for me right out of the packet... but then started doing the I'm gonna ignore your BT headset thingy. This fixed it, pretty much, obviously no notifications , and I still can't persuade the button on my Motorola S9's to launch M$ VC (jus' dials last number). But otherwise, thanks.
BTW
If anyone knows how to get the phone buttom on my S9 headset to launch M$ VC then I'd be very grateful... having to press button 5 atm.
The only ROM I can get this to work on currently is Black Satin on my BT8010..
Schaps latest ROM is a no go :-(
This is working for me with the registry change to btvoicecommand.exe. But I have a strange problem (no, not THAT problem...): the first time I use VC from my bluetooth HF it works fine. If I use it again soon after that (to dial someone else, etc.), it takes 30 seconds to a minute to prompt me for the command. To get it to respond properly again, I have to soft reset, but it still only prompts me quickly once before hanging again.
I'm running Black Satin and VC 160.4622.0.
Any news on BT Notifications?
VC 1.6 on vp3g works fine over BT for me with the above steps, except the known issue with notifications over BT. Has anyone heard any news that a fix has been found for the BT notifications issue? I really hate not having them.
Hello everyone. I have just recently updated/flashed/done something to my phone to the Artemis Touch 4.02. Great rom so i have seen, no complaints with it. (Unsure what the proccess is actualy called.)
Only setback i have is that files i recive by bluetooth go straight to my main memory. What i would like to do is to have it go straight to my micro sd card, and to have a progress bar showing me the status.
I have tried a few programs.
DrYAR Bluetooth manager 1.5: Does what i need, but seems to be a little unstable. Sometimes freezes or will not connect to most phones.
DrYAR Bluetooth manager 1.6: Works great, only problem, if constently asks for every bit of the file you recive. So if its set to auto recive, theres alot of beeping going on.
DrYAR Bluetooth manager 2.0: I have seen this version somewhere, but i cant seem to download it
BT Tools: Dosnt seem to have many options.
Enable A2DP:Not sure where i got this from, but i had it from when i had a MDA Compact II. Worked for what i needed then. Dosnt seem to work on this one.
Broadcom Bluetooth Manager:Looks fantastic, many options to mess around with, but it just wount run on my device. Says there is not enogh memory to turn on bluetooth.
Is there any way i might make the first or last options work well, or is there another app i can try? So far it is a pain to move them over. I would like to keep the internal memory as free as possible.
Any more information you want do let me know.
PS Sorry for any spelling errors.
Is no one able to reply?
How about moBlue, works well on my Artemis and Diamond
HTH
Kim
Dosnt seem to work well on mine, still wants to use the windows version. Or sometimes the phone/whatever just doesnt connect
Well, I use moBlu as well on my Artemis & it works well. For it to work, you need to launch it before receiving a transfer via Bluetooth. You can set it up in its settings to make your phone discoverable when you launch the app & disconnect bluetooth when app is closed. And in the filters you will find 2-3 default filters, just select the "*.*" filter & set the location to a folder on your card. You can delete the other two filters or edit them & also add more if you want. They are file extension filters so if any file you are receiving matches them the filter will be applied & your file will be automatically stored in that specified filter folder.
Hello,
I have really a strange issue. I am unable to "beam" the images from Touch HD to Bluetooth enabled PC using Bluetooth. I tested against two PCs and it never worked. The activesync works ok. But i don't want to use activesync... as it's a bit of overkill - i am looking for a out of a box solution that will possibly work with every pc everywhere... last time i ended up with mailing the images by email =))
Both sides have bluetooth enabled in visible mode, i am using either resco or wm file explorer beam function, then the list of visible bluetooth devices appears, but when i select the PC it always fails. =((
I remember there was some issue of "too much services pc provided", but i am unable to remove services provided by the pc i have no use for as FAX for example. On both PCs there's bluetooth stack by Widcomm, once branded for IBM and once for HP.
I have a PC with integrated bluetooth module and a Microsoft driver. If I right click on the Bluetooth icon in the system tray (lower right near clock), I can select "receive a file" which brings up a little wizard that waits for you to beam your picture. Maybe your Bluetooth device also has this software. I use ActiveSync for several pictures because in the long run it's quicker.
PGMMA, yes, but this is about widcomm driver... not ms... =(
Activesync is OK, but won't work on a PC without Activesync - i had an issue, when i want to send a image/file to a friend. No luck. The Bluetooth Stack Tray icon gets green for a sec, then white again with no message what so ever.
The other computer now requires pairing all the time, but i am sure i can handle that later. =)
Well i tested dryar 1.6 (i was unable to find the version 2.0 which should be on dryar.com) without a luck, but was able to make at least part of the bluetooth ftp explorer working (HTC_BT_FTP_Explorer_1.2.30489.cab)
i can share my files on cell phone, but i am unable to browse others after installing this file (couldn't enable the explorer in the ftp tab), when i click the icon in programs nothing happens.
anyone has a bt explorer fully compatible with blackstone / touch hd?
tried all versions from here, but simply \windows\btftpclient.exe won't start =(
http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=3121049
identically problem
There is NO working BT Explorer client for the Touch HD. I called HTC 2 weeks ago about this issue. They said that it's not supported with the current ROM, but they did say that they are building a new ROM to be released shortly & it WILL have BT Explorer support.
Vampire2800 said:
There is NO working BT Explorer client for the Touch HD. I called HTC 2 weeks ago about this issue. They said that it's not supported with the current ROM, but they did say that they are building a new ROM to be released shortly & it WILL have BT Explorer support.
Click to expand...
Click to collapse
I did attach the BT explorer that I using.
BT Explorer
Hi, So could you tell me did they fixed the problem, becouse my Bluetooth Explorer on HTC HD wouldn't start. I mark strat using BT but after click ok it's still unchecked !!! so finally is it solved this or not becouse it's a really disapointed accourding the price of this device.
Thanks
Vampire2800 said:
There is NO working BT Explorer client for the Touch HD. I called HTC 2 weeks ago about this issue. They said that it's not supported with the current ROM, but they did say that they are building a new ROM to be released shortly & it WILL have BT Explorer support.
Click to expand...
Click to collapse
gpaunescu said:
I did attach the BT explorer that I using.
Click to expand...
Click to collapse
It didn't work here? I got only the wait cursor for 2 seconds and nothing else...
SOLVED!! with help of kwbr,releasing his t8282 kitchen, btftp version is 1.2.37656.91, searching internet ,i find cab, it's simply to find :
h%ttp://ishare.iask.sina.com.cn/f/22305165.html
thank you kwbr
I have enabled the SIP client (BTW it works but very limited) following the instructions in general threats.
After reboot and some tests, I've realised that the GPS dosn't work any more.
Basically it is not detected by any SW (TTN, Google, AutoGPS, ..)
Any suggestion?
I JUST went throught the same thing 2 days ago - I had MS native VOIP working on my 6700 and didnt notice a problem obviously, as it has no GPS.
Here's whatcha gotta do:
You wont be able to remove the Sleuth's VOIP program - it will always fail. You need to open the cab on your desktop, extract and examine the setup xml and manually remove the files from the windows dir on your device and reg entries contained therein.
Or hard reset... whichever is easier for you.
The problem file is dnsapi.dll, but you wont get GPS back until you regedit and remove the files.
THEN, you can have your cake and eat it too, by installing THESE files.
Use SIP config to setup your provider.
Use Dontsleep Wifi to prevent the phone from auto sleeping during voip calls.
Use AutoAudioRoute/AudioRoute to push the audio to the earpiece instead of the speakerphone/Headphones, as is the case with all VOIP clients in WM6.
Hope this helps!