Develop Bugs

TOMTOM 5 shows no keyboard on screen ???

I installed TomTom 5 on my qtek 9090 and when I choose navigate to address there is no screen keyboard. I think it detected the external keyboard and therefore is not showing it.
Anyway to get the screen keyboard working ?? :?:

:idea: Try the following...
In register of PDA..
HKEY_CURRENT_USER\Software\Microsoft\Shell
Change..
HasKeyboard value from 1 to 0
To get to the register u can use the following app.
Registry Workshop from http://www.torchsoft.com
Install this on your PC and use file / Connect to register of mobile device
(Active sync must be connected to the device
Good Luck!

No luck
Didn't work
Changed > softreset >no keyboard
reinstalled >no keyboard

tt 4.4
I have the same prob with TomTom 4.4 and my Qtec 9090.
Hope someone comes up with a fix.
How is TT5, I was waiting to see if it was a lot better than 4.4 or much the same.
No I dont have the prob anymore. Changed to 0 rebooted and changed to smaller keybord in TT 4 and there it was.
Thanks DVB works fine and just in time for a 4 day weekend driving around up nth Holland. :lol: :roll: :wink:

How the HELL did you get TomTom Nav 5 so quickly?!?!?!
The upgrade was only released yesterday.
PLEASE EXPLAIN!!! :shock:
lydiachris

DVB4Free said:
:idea: Try the following...
In register of PDA..
HKEY_CURRENT_USER\Software\Microsoft\Shell
Change..
HasKeyboard value from 1 to 0
To get to the register u can use the following app.
Registry Workshop from http://www.torchsoft.com
Install this on your PC and use file / Connect to register of mobile device
(Active sync must be connected to the device
Good Luck!
Click to expand...
Click to collapse
This worked for 4.4, but not for the new 5 version.

I have made those changes and anything doesn't work....

has somebody been able to troubleshoot it??
greetings

Me too, Im gonna have a poke around and see if I can throw something into the mix.
:shock:

lydiachris said:
How the HELL did you get TomTom Nav 5 so quickly?!?!?!
The upgrade was only released yesterday.
PLEASE EXPLAIN!!! :shock:
lydiachris
Click to expand...
Click to collapse
Check the newsgroups :wink:

I have the same problem with TT5.
I have asked the fench support of Tomtom and they replied to me that there was no issues for this at that time.
It is due to the fact that tomtom developpers have made the choice to consider the QTEK 9090 or similars like a Keyboard PPC (like HP6500 or Treo 650) to limit the number of version... that's what they said ... :shock:
As the QTEK 9090 do show a virtual keyboard on Street Number search or on reg screens and not on Town or Street name sreens, i do think that there is actualy a bug on QTEK 9090. It is also disapointing to try to type a poste code search with the hardware keyboard as when i press the "Fn" key i got a nice "Ñ" or when i press the "Shift" i got a "Ò"...
I think we should send a lot of request to the Tomtom support to have a chance to see an update in a future relaese (It could be an option whithin the parameters for exemple...)
...

Hi,
It was even worse in my case (I upgraded my Rom 1.22.556 to 1.40.553 since release of new Dutch retail a few days ago):
- As already mentioned the Registry hack (see reply from DVB4Free) works only for 4.4 version and not 5.0. I am still looking for a work-around to get my on-screen keyboard back while I wanna type a location/street to navigate to.
- Despite the fact I am using TomTom bluetooth receiver, I can't get my Qtek9090 connected to TomTom as long as I select the TomTom BT icon in wizard interface. After a lot tries I figured out that it only works if I select the 3th Icon (general bluetooth receiver) and not the second icon (the small silver color TomTom BT receiver). Isn't this odd?
- My 'Navigate To' item in Contacts popup menu is gone for good. It was working on TomTom 3.07 (and even on 4.4 so far I can remember). But since upgrade to v 5.0 I can't navigate to someone's address from my Contact list.
regards,
- Avareh

on screen keyboard
DVB4Free, dude is there nothing you can do to fix this problem? I tried it on TomTom 4 and it worked fine, after altering the key from 1 to 0 it worked. I have an XDA 2s and now I've just installed TomTom 5 I can't navigate to anything!
Cheers!

Anyone had any luck with this yet?
Peter

Success!!!
pscomp said:
Anyone had any luck with this yet?
Peter
Click to expand...
Click to collapse
I have found that if you download the Great_Britain.postal file the Fn & Shift keys work ok so you can enter numbers
And also the added benefit of 7 digit postcodes, not sure about ppl who cant find a postal file for their own country though. But it worked for me so give it a try...

pscomp - I am new to all this :shock: , but just got tt5 and I also have a MDA III. Can you explain what you did to get the keys working.. Thanks in advance...not sure what you mean about the download etc...wherefrom and where too?

Hi,
I can't remember where I downloaded the file from. Ive tried to upload it but I think the ftp is down :? . But it looks like it may be here ftp://ftp.xda-developers.com/Blueangel/
All you do is create a folder called zip on your SD card and put the file in there. That is assuming you are using the Great Britain Map. I will keep trying to upload the file though.
Hope this helps you

Yay, got the file uploaded.
All you should need to do is download the file, unzip it and then stick it in the zip folder on your SD card.(That is assuming you are using the Great Britain Map)..
ftp://xda:[email protected]/Uploads/
The file is called GreatBritain.zip

ekapco said:
I installed TomTom 5 on my qtek 9090 and when I choose navigate to address there is no screen keyboard. I think it detected the external keyboard and therefore is not showing it.
Anyway to get the screen keyboard working ?? :?:
Click to expand...
Click to collapse
same happens to me when I install 1calc

I bought a new TT5 UK BT kit that arrived yesterday.
I (obviously) have the ZIP file on the SD card and I still don't have an onscreen keyboard. The odd thing is, I'm pretty sure I did have an onscreen keyboard during the installation, as I used it to enter my "home" location.
I've logged a bug report with TomTom, if they come back with anything useful I'll let you know.
Q.

I need a ROM cooking mentor ! Need Radio/BT A2DP

Hello,
would be happy to exchange french cooking, but ROM cooking is, if I understand, what I need to do, if I wish to upgrade my SPV M2000 (Orange France).
Could someone help me understand and manage my ROM cooking?
My cooking 'chef' !
Would like to get a clear view, understanding, method, issues of what/how cooking is.
My first goal is to enhance the BT capabilities of my SPV: BT is working just with the SIM phone, I would like to be able to have audio capabilities for any sound capable applications (mp3 player, IP phone, other).
I heard about A2DP profile, is that a software to add? a registry keys to activate? is that included in a BT latest version?
Could someone help me on that?
I use IP phone extensively, wirelessly, with global roaming, will appreciate to share my experience on using this almost WW free calling feature.
Call me !
Jennyfer
Paris - France.

to get a2dp you need to get the broadcom bluetooth stack and do some regitry changes
mind you if you do switch to that bluetooth stack you loose the ability to use a bluetooth headset for phone
IP phone require a much bigger bandwidth then gprs can give so to use programs like skype and such you need to be on wifi otherwise they will only send text
cooking is really a left over from the way that xda1's worked
with later models people just unlock the extented rom and place the cab files they want in there

Thank you, Rudegar, for your prompt answer.
So, you say that "cooking" is from past, and that now the method with extended rom is selecting/using cab files?
Where can I get the broadcom bluetooth stack ?
(have ftp client to xda ftp site)
Which registry changes I have to do ?
Why BT A2DP imply to have phone call with Bt impossible ?
Is there a strategy to have both ?
So many questions, but am really new at that !
Thank you!
Jennyfer

http://forum.xda-developers.com/viewtopic.php?t=25443&highlight=a2dp
i link to the 2 threads about a2dp in this thread where you can download and see the registry settings which need changed
and i have both "a2dp" and headset on my xda2 because i use the i-Phono headset which kinda cheat with the a2do part using a dongle
and yes today people place programs they want autoinstalled in the extented rom and there is no way to place programs in the real rom like people could on xda1

Rudegar, you said: "and i have both "a2dp" and headset on my xda2 because i use the i-Phono headset which kinda cheat with the a2do part using a dongle"
This mean there is a way to keep headset profile along with A2DP profile ?
So your i-Phono headset works with both SIMphone and other audio applications?
What is a2dp part / dongle?
thanks for yor help!
Jennyfer

Rudegar,
the first link pointed to an unavailable file.
I got the Broadcomm BT 1.6.... from second link.
So, I just have to install CabInst (better tool?) on my BA? and install this cab from the BA?
Does I have to tweak registry?
I never did this and would not like to mess it !
Jennyfer

I found this audio gateway registry settings from MSDN/Dev, does it apply to 2003SE ?
http://msdn.microsoft.com/library/d...html/wce50conaudiogatewayregistrysettings.asp
It is like if BT is never totally activated (even on mobile 5.0), so perhaps these keys could wakeup some BT features?

http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=50
the reg changes are described here
about cab files then personaly i just double click on them when i wanted them to install manualy
but otherwise you dont need to do anything with them apart from copying the cab files into the extented rom dir and adding their name in the config.txt in the same dir

cannot find it while file-exploring my BA.
Where is located the "extended rom dir" on the Pocket PC ?

being newbie, if I well understand, I have to use the extended rom unlock tool to access extended rom dir ?
and then edit config.txt in \windows.
I put my cab here.
And then?
- system update it automatically?
- or does I have to soft? hard? reboot?
be explicit, please! afraid to break my system.

yes you have to unlock and unhide your extented rom using the program
no you have to hardreset in order for it to install the cab files

I could have started reading the BA wiki first ! I did.
My best advice to newbies (as I am) is to start by wiki.
So, if I well understand, I can change my langage, and everything, choosing, whichever ROM, Radio & so on on my Orange France originated SPV, and install, by example, English ROM 1.4, latest radio & BT ?

Has anyone got Widcom to work with A2DP and Headset profile?
I can get my Sonorix BT stereo headset connected to both profiles, however the headset one only partially works. Call answer doesnt work - although cancel call does. Wierd. Mp3's stream fine in WMP10 though via A2DP.

TOMTOM GO and WM6 (DUN)

Microsoft are going to release WM6 with the ability to enable (DUN) for legacy devices, I.e. TOMTOM GO series... are there any cooks interested in releasing a ROM with this option enabled?

this would be great. if this was done i would have nothing to complain about with wm6

Same here, it's just the final thing I need for a perfect WM6 ROM.

One vote more
Same, here. I also tried to use DUN on WM6 with TomTom Go. But apparently WM6 lacks DUN support in Bluetooth Stack.
Does anyone have a fix for this or is there any good WM6 Rom out there with Bluetooth DUN support?

Yes-Sir-Eee
I would love to see that, my 910 won't use the services without DUN...

I was browsing earlier and I think I saw a .cab file in the Wizard forums for PAN support in Windows Mobile 6, however I don't think that anyone said that it worked.

Really?
Point me in the right direction & I'll happily give it a whizz...
Cheers,

mccreath said:
Point me in the right direction & I'll happily give it a whizz...
Cheers,
Click to expand...
Click to collapse
I downloaded the CAB from here, and installed on my Wizard. It says it installed but does not work.

Here's some more info:
http://forum.xda-developers.com/showthread.php?t=307235&page=2

I can confirm this fix
Used trinity files posted by MuN on the above thread.
heres what i did
Installed cab - soft reset
pasted all files from zip in windows folder - soft reset
then unpaired tomtom 910 and reparied, hey presto it found DUN support
Perfect, have been waiting for a fix for this

I've run the .cab and copied the files into the Windows directory, however I'm having a real headache trying to configure a data connection.

Which device to choose for TomTom GO 910?
@the.drone
I followed your instructions and now my TomTom reports that my phone has DUN capability. Problem is HTC TyTN or HTC Hermes ist not listed as phone in the phone list and automatic configuration does not work.
Can you please give instructions which phone to use or how to configure the data connection manually? Because DUN support which can't be configured is as good as no DUN support.
Thanks a lot.
Marc

it just worked first time automaticaly with mine, maybe i was just a fluke but it found the data coonection first time on 3g

How can I find out my TomTom thinks my phone has DUN?
Edit: when I try to add my TomTom to my Hermes, it only brings up a handsfree tick box, when in Windows Mobile 5 I think it also brought up two additional tick boxes. Any ideas if this is following the path to success of if I've screwed up?

Double post.

DUN Doin' it
Will be giving it a go first thing in the morning.
Cheers for the update, will post results....

Bargain!
You eff-ing ROCK... DUN on WM6.
My TomTom 910 loves you!!
Hoo-haa!

How did you get it to work?

So can someone share how they did it?
I followed the instructions and it now finds my ttg 300, and says it has the services - but can't set up the actual DUN connection either manually or automatically!
Any ideas?
Matt

I really am sorry to be a pain in the butt, but I'll outline what I've done.
1). Paired my Hermes up with my TomTom 910.
2). Run the .cab.
3). Soft reset.
4). Copied the files into the Windows directory of my Hermes via the storage card.
5). Soft reset.
6). Repaired my Hermes and TomTom 910 after having deleted the previous connection. At this point it says "The following features were found: Hands-free calling, Wireless data connection, Phonebook".
At this point I try and setup a data connection that it hits the fan. It's really annoying because it feels like I'm falling at the final hurdle. I also wondered if I was struggling because of an issue with connecting to the T-Mobile network, however am I right in thinking that mccreath's using a T-Mobile GPRS contract SIM connection?

Help! SIM Access Profile on WM6 not working!!

Hi, I have:
- TYTN with WM6 (latest version from Schap)
- VW Touareg with Premium Bluetooth kit (2007 touch-screen model)
The phone is recognised (the name), it seems to pair ok (had to put in a 16-digit PIN), but then the car kit cannot connect to the phone for some reason.
I'm not sure why, but what I do know is that SAP has worked with a Nokia phone (dealer tested it with me). There, it downloaded its address book. It doesn't do that with my TYTN. I have double-checked all my settings on my phone, it has SAP and bluetooth enabled
So, has anybody managed to see their SAP in action on the WM6 enabled TYTN, and if so did it work "straight out of the box" or did you do something magical that you're willing to share!!!
If it's not working I'll just buy a £40 unlocked Nokia with SAP support and use that, but preferably I'd like to use my own phone.
Thanks for your help!

- Install the BT SAP cab you find here
http://forum.xda-developers.com/showthread.php?t=319468
- Enable Remote Sim Access
- Softreset
and it should be working. (does only synchronise the contacts on your SIM though, not the contacts in your phonememory)
Working here perfectly with VW Passat '07 with Premium Bluetooth Handsfree (ROM: Hypercore Lite SE). If you have any questions you can pm me.

WDawn said:
- Install the BT SAP cab you find here
http://forum.xda-developers.com/showthread.php?t=319468
- Enable Remote Sim Access
- Softreset
and it should be working. (does only synchronise the contacts on your SIM though, not the contacts in your phonememory)
Working here perfectly with VW Passat '07 with Premium Bluetooth Handsfree (ROM: Hypercore Lite SE). If you have any questions you can pm me.
Click to expand...
Click to collapse
Thanks WDawn,
Well it's promising you got it to work!! (yay!)
But I had spotted your post on the forum, downloaded the file, but the phone refuses to install it. I tried it on the older Schaps version, and I've even updated to the latest Schaps version. Both fail.
This is what happens: when I install in the Main Memory it says I do not have the required permissions, and when I install in the Extended Memory it says that it cannot install. When I tried installing it on the MiniSD card it produces the same as the memory message. I copy and pasted the file from my computer onto my phone, and tried installing it from the MiniSD card. I did not try to install it from the phone's memory itself I am just thinking.
Any idea???
Thanks!! (also thanks for confirming it's only SIM address book, forgot about that one )

To solve the issue of the permissions your should try this
http://forum.xda-developers.com/showthread.php?t=340716&highlight=application+unlock
If it's not working, reflash with Hypercore Lite SE. It's the best ROM out there.
Get it here : http://forum.xda-developers.com/showthread.php?t=339529
You won't regret the (expensive) Premium Bluetooth Handsfree from VW. Never had such a good handsfree kit. Perfect sound quality!

WDawn said:
To solve the issue of the permissions your should try this
http://forum.xda-developers.com/showthread.php?t=340716&highlight=application+unlock
If it's not working, reflash with Hypercore Lite SE. It's the best ROM out there.
Get it here : http://forum.xda-developers.com/showthread.php?t=339529
You won't regret the (expensive) Premium Bluetooth Handsfree from VW. Never had such a good handsfree kit. Perfect sound quality!
Click to expand...
Click to collapse
I've heard the handsfree kit yes and it's fantastic, I agree!
Unfortunately, the file still refuses to install . Everything else works. I can install other things without a problem. I've unlocked the phone, checked registry settings (the policies one) and ran various unlockers. That seemed to do something (different security message, or sometimes none) but this particular cab file simply refuses to install.
So I'm afraid and you're right, I'll have to change to the Hypercore ROM... Shame because I liked the way Schap's ROM looks but I will try this because if it's just for looks I might be able to survive with another template
If in the meantime you or anyone else has any brilliant ideas let me know. Otherwise I'll revert this weekend - to let you know whether it succeeded or not (useful for others too on the forum perhaps!).

WDawn said:
To solve the issue of the permissions your should try this
http://forum.xda-developers.com/showthread.php?t=340716&highlight=application+unlock
If it's not working, reflash with Hypercore Lite SE. It's the best ROM out there.
Get it here : http://forum.xda-developers.com/showthread.php?t=339529
You won't regret the (expensive) Premium Bluetooth Handsfree from VW. Never had such a good handsfree kit. Perfect sound quality!
Click to expand...
Click to collapse
OK, I've reflashed my phone with Hypercore Lite SE and installed the BT_Test.cab file (which installed successfully) but it's still not working!!
Mind you, my girlfriend and I have the same phone (so 2x TYTN); I flashed hers twice (two diff ROMs), and I flashed mine twice. They are both "found" by both ROMs by the car kit, but once you've inserted that 16-digit security code the carkit gives it is paired but the carkit says it cannot establish a connection.
With both phones!!!!
I know the kit works as it paired with a simple Nokia effortlessly. That's probably because Nokia supplies the technology to VW.
So, unless someone has got a really smart idea, it looks like I'll have to buy a cheap unlocked Nokia 6230 from ebay...
I just find it really annoying you managed to get it to work (good for you ) but that the result is different for me! that's bizarre.
Anyone!??!?!?

Have you tested it with an official release of WM6 from HTC just to see if an unmodified version will work?

Scrambler001 said:
Have you tested it with an official release of WM6 from HTC just to see if an unmodified version will work?
Click to expand...
Click to collapse
It's a good point - not yet!
Where can I download this from other than from HTC directly?? I have a T-Mobile Vario II and this does not come with an HTC membership (I've already tried via HTC's website)... Bit stupid really as it's the same device but there you go. T-mobile has no update unfortunately.
Cheers

Ah, I found a working link via the main page...
I'll post back to confirm the result - thanks!

Hope it works for you. If it does then you know it's probably some settings someplace that need tweaking or it could be a prog thats in the cooked ROM that just does not agree with your system configuration.

It didn't work.
After all that hassle of downgrading rom, SuperCIDing etc...
It doesn't work with the original HTC WM6 ROM arghhhhhhhhhhh
Always accepts the 16-digit code but then the "handshaking" stops; it pairs but the carkit "cannot establish a connection". As if it's incompatible, but then some other people managed to get it to work.
It's unbelievable.
Really bizarre
I'm [this] close to buying a Nokia 6230. Grrr.

You can alway put it back to WM5 if it's that important but I know you don't really want to do that. It was a good try though.

wifi auto switch off

Hi guys
before I upgraded my ROM (Artemis Touch 4.02 WM6.1 WWE ROM) on my XDA orbit the WiFi used to switch off automatically when in standby mode. Can I get this ROM to do the same please?
Is there a registry hack or a cab file to install to do this for me.
Also when I check out the memory icon in settings the tab which shows running programs is missing, can I get that back?
Again is the a registry hack or cab file for this?
In all other respects this is a fantastic ROM and thanks to Meschle for his hard work putting this together
Simon

ok, I figured this out myself!
basically, if I use the com manager to switch WiFi on/off & put my Orbit into standby it wil switch off the Wifi automatically.
however; if I use a button mapping program like Hbutton or AEbutton to toggle the WiFi it WON'T switch off automatically. weird but true.
So my question is can I get a registry fix to sort this out or am I going to have to use the com manager from now on?
not happy to use button mapping simply because on at least two occasions I have run my battery flat because I forgot to switch oif the WiFi
(Still) not sorted out the running program tab in the memory module though)
thanks
Simon